Evaluierung des Energieausweises Eine empirische Studie zur Wahrnehmung der Energieeffizienz von Wohnimmobilien aus der Verbraucherperspektive (Evaluation of the German Energy Performance Certificate An Empirical Study on the Perception of Energy Efficiency of Residential Properties from the Consumers' Perspective)

2017 ◽  
Author(s):  
Bertram I. Steininger ◽  
Claudia Nadler ◽  
Melanie Franke ◽  
Carolin Pommeranz
Keyword(s):  
Energy Efficiency ◽  
Empirical Study ◽  
Energy Performance ◽  
Empirische Studie ◽  
Residential Properties

scholarly journals Experimental Data and Simulations of Performance and Thermal Comfort in a Typical Mediterranean House

Energies ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 3311
Author(s):  
Víctor Pérez-Andreu ◽  
Carolina Aparicio-Fernández ◽  
José-Luis Vivancos ◽  
Javier Cárcel-Carrasco
Keyword(s):  
Energy Efficiency ◽  
Thermal Comfort ◽  
Energy Demand ◽  
Natural Ventilation ◽  
Thermal Characterization ◽  
Energy Performance ◽  
Building Stock ◽  
Energy Demands ◽  
Dwelling House ◽  
Account Standard

The number of buildings renovated following the introduction of European energy-efficiency policy represents a small number of buildings in Spain. So, the main Spanish building stock needs an urgent energy renovation. Using passive strategies is essential, and thermal characterization and predictive tests of the energy-efficiency improvements achieving acceptable levels of comfort for their users are urgently necessary. This study analyzes the energy performance and thermal comfort of the users in a typical Mediterranean dwelling house. A transient simulation has been used to acquire the scope of Spanish standards for its energy rehabilitation, taking into account standard comfort conditions. The work is based on thermal monitoring of the building and a numerical validated model developed in TRNSYS. Energy demands for different models have been calculated considering different passive constructive measures combined with real wind site conditions and the behavior of users related to natural ventilation. This methodology has given us the necessary information to decide the best solution in relation to energy demand and facility of implementation. The thermal comfort for different models is not directly related to energy demand and has allowed checking when and where the measures need to be done.

scholarly journals Minimal Monitoring of Improvements in Energy Performance after Envelope Renovation in Subsidized Single Family Housing in Madrid

2020 ◽  
Vol 13 (1) ◽  
pp. 235
Author(s):  
Fernando Martín-Consuegra ◽  
Fernando de Frutos ◽  
Ignacio Oteiza ◽  
Carmen Alonso ◽  
Borja Frutos
Keyword(s):  
Energy Efficiency ◽  
Energy Savings ◽  
Low Cost ◽  
Energy Performance ◽  
Quality Parameters ◽  
Urban Setting ◽  
Single Family ◽  
Nineteen Fifties ◽  
Environment Quality ◽  
Urban Complex

This study quantified the improvement in energy efficiency following passive renovation of the thermal envelope in highly inefficient residential complexes on the outskirts of the city of Madrid. A case study was conducted of a single-family terrace housing, representative of the smallest size subsidized dwellings built in Spain for workers in the nineteen fifties and sixties. Two units of similar characteristics, one in its original state and the other renovated, were analyzed in detail against their urban setting with an experimental method proposed hereunder for simplified, minimal monitoring. The dwellings were compared on the grounds of indoor environment quality parameters recorded over a period covering both winter and summer months. That information was supplemented with an analysis of the energy consumption metered. The result was a low-cost, reasonably accurate measure of the improvements gained in the renovated unit. The monitoring output data were entered in a theoretical energy efficiency model for the entire neighborhood to obtain an estimate of the potential for energy savings if the entire urban complex were renovated.

scholarly journals Attitudes and Approaches of Finnish Retrofit Industry Stakeholders toward Achieving Nearly Zero-Energy Buildings

2021 ◽  
Vol 13 (13) ◽  
pp. 7359
Author(s):  
Sadaf Alam ◽  
Miimu Airaksinen ◽  
Risto Lahdelma
Keyword(s):  
Energy Efficiency ◽  
Energy Performance ◽  
Embodied Energy ◽  
Running Time ◽  
Performance Targets ◽  
Construction Design ◽  
Design Engineers ◽  
Energy Efficient Buildings ◽  
Key Stakeholders ◽  
Property Owners

Key stakeholders in industry are highly responsible for achieving energy performance targets. Particularly, this paper assesses the attitudes, approaches, and experiences of Finnish construction professionals regarding energy-efficient buildings, or nZEBs. A three-tier investigation was conducted including surveys and expert interviews with several stakeholders. The structure of this approach was informed by preliminary data and information available on the Finnish construction sector. The questionnaire showed that the stakeholders ranked energy efficiency and embodied energy/carbon as very important. The survey highlighted that the importance of the embodied carbon CO2 in the materials is less important than the energy efficiency from many of the stakeholders’ points of view. “Energy efficiency” is very important for ESCOs, contractors, and facility managers followed by architects, HVAC engineers, and construction design engineers. Nevertheless, the opinions of architects ranked “embodied energy CO2” as the most important regarding nZEB. When it comes to the importance of “running time emissions” toward nZEB, contractors and ESCO companies ranked it as 1 for importance followed by property owners (78%) and tenants (75%). It is very fascinating to see from the survey that “running time carbon emissions” has been ranked 1 (very important) by all stakeholders. This study will enable construction industry stakeholders to make provisions for overcoming the barriers, gaps, and challenges identified in the practices of the nZEB projects. It will also inform the formulation of policies that drive retrofit uptake.

scholarly journals Water Extraction from Air: A Proposal for a New Indicator to Compare Air Water Generators Efficiency

Energies ◽  
2021 ◽  
Vol 14 (1) ◽  
pp. 224
Author(s):  
Lucia Cattani ◽  
Anna Magrini ◽  
Paolo Cattani
Keyword(s):  
Energy Efficiency ◽  
Comprehensive Evaluation ◽  
Specific Energy Consumption ◽  
Energy Performance ◽  
Water Extraction ◽  
Coefficient Of Performance ◽  
Efficiency Evaluation ◽  
Evaluation Approach ◽  
Cycle Systems ◽  
Definition Of

Water extraction from air, based on reverse cycle systems, is becoming a technology more and more diffused and various models of air to water generators (AWG) are now available, all claiming the best efficiency. To date, there is not a standard indicator stating energy efficiency for AWGs, neither in the literature nor in technical practice. The only evaluation parameter, that can be found is a sort of specific energy consumption (SEC) without any clear indications about the involved calculation terms, definition of hypotheses, or environmental conditions. The current work is a first proposal of an indicator to standardise the AWG efficiency evaluation. The indicator is called WET (Water Energy Transformation); it states water production as a useful effect of an AWG machine and calculates its energy performance with an approach similar to COP (Coefficient of Performance) and EER (Energy Efficiency Ratio) evaluation. The indicator is meant to be a normalised tool that permits comparing different AWG machines, but it is also the first part of a wider study, currently under development that is oriented to obtain a global index formulation that combines WET itself, EER and COP, and it is intended for a comprehensive evaluation of all the useful effects of a reverse cycle in integrated machines, in compliance with the current efficiency evaluation approach. The current paper presents the WET equation, with a discussion about involved terms, a set of normalised calculation conditions and some application examples, including a comparison with SEC.

Net zero carbon: Energy performance targets for offices

2021 ◽  
Vol 42 (3) ◽  
pp. 349-369
Author(s):  
Robert Cohen ◽  
Karl Desai ◽  
Jennifer Elias ◽  
Richard Twinn
Keyword(s):  
Energy Efficiency ◽  
Minimum Energy ◽  
Energy Performance ◽  
Consultation Process ◽  
Net Zero ◽  
Extensive Consultation ◽  
Operational Energy ◽  
Legislative Framework ◽  
Zero Carbon ◽  
The Uk

The UKGBC Net Zero Carbon Buildings Framework was published in April 2019 following an industry task group and extensive consultation process. The framework acts as guidance for achieving net zero carbon for operational energy and construction emissions, with a whole life carbon approach to be developed in the future. In consultation with industry, further detail and stricter requirements are being developed over time. In October 2019, proposals were set out for industry consultation on minimum energy efficiency targets for new and existing commercial office buildings seeking to achieve net zero carbon status for operational energy today, based on the performance levels that all buildings will be required to achieve by 2050. This was complemented by modelling work undertaken by the LETI network looking into net zero carbon requirements for new buildings. In January 2020 UKGBC published its guidance on the levels of energy performance that offices should target to achieve net zero and a trajectory for getting there by 2035. This paper describes the methodology behind and industry perspectives on UKGBC’s proposals which aim to predict the reduction in building energy intensity required if the UK’s economy is to be fully-powered by zero carbon energy in 2050. Practical application: Many developers and investors seeking to procure new commercial offices or undertake major refurbishments of existing offices are engaging with the ‘net zero carbon’ agenda, now intrinsic to the legislative framework for economic activity in the UK. A UKGBC initiative effectively filled a vacuum by defining a set of requirements including energy efficiency thresholds for commercial offices in the UK to be considered ‘net zero carbon’. This paper provides all stakeholders with a detailed justification for the level of these thresholds and what might be done to achieve them. A worked example details one possible solution for a new office.

scholarly journals A State of the Art of the Overall Energy Efficiency of Wood Buildings—An Overview and Future Possibilities

Materials ◽  
2021 ◽  
Vol 14 (8) ◽  
pp. 1848
Author(s):  
Matheus Roberto Cabral ◽  
Pierre Blanchet
Keyword(s):  
Energy Efficiency ◽  
State Of The Art ◽  
Energy Performance ◽  
Environmental Benefits ◽  
Embodied Energy ◽  
Future Research ◽  
Hybrid Buildings ◽  
Wood Frame ◽  
Mass Timber

The main goal of this study was to review current studies on the state of the art of wood constructions with a particular focus on energy efficiency, which could serve as a valuable source of information for both industry and scholars. This review begins with an overview of the role of materials in wood buildings to improve energy performance, covering structural and insulation materials that have already been successfully used in the market for general applications over the years. Subsequently, studies of different wood building systems (i.e., wood-frame, post-and-beam, mass timber and hybrid constructions) and energy efficiency are discussed. This is followed by a brief introduction to strategies to increase the energy efficiency of constructions. Finally, remarks and future research opportunities for wood buildings are highlighted. Some general recommendations for developing more energy-efficient wood buildings are identified in the literature and discussed. There is a lack of emerging construction concepts for wood-frame and post-and-beam buildings and a lack of design codes and specifications for mass timber and hybrid buildings. From the perspective of the potential environmental benefits of these systems as a whole, and their effects on energy efficiency and embodied energy in constructions, there are barriers that need to be considered in the future.

scholarly journals An Empirical Study of Hadoop's Energy Efficiency on a HPC Cluster

2014 ◽  
Vol 29 ◽  
pp. 62-72 ◽  
Author(s):  
Nidhi Tiwari ◽  
Santonu Sarkar ◽  
Umesh Bellur ◽  
Maria Indrawan
Keyword(s):  
Energy Efficiency ◽  
Empirical Study

A method for energy efficiency assessment during urban energy planning

2014 ◽  
Vol 3 (2) ◽  
pp. 132-152 ◽  
Author(s):  
Karin Regina de Casas Castro Marins
Keyword(s):  
Energy Efficiency ◽  
Urban Areas ◽  
Energy Use ◽  
Energy Performance ◽  
Urban Morphology ◽  
Pollutant Emissions ◽  
Energy Planning ◽  
Bottom Up ◽  
Content Type ◽  
Urban Energy

Purpose – Energy use in urban areas has turned a subject of local and worldwide interest over the last few years, especially emphasized by the correlated greenhouse gases emissions. The purpose of this paper is to analyse the overall energy efficiency potential and emissions resulting from integrated solutions in urban energy planning, in the scale of districts and neighbourhoods in Brazil. Design/methodology/approach – The approach is based on the description and the application of a method to analyse energy performance of urban areas and support their planning. It is a quantitative bottom-up method and involves urban morphology, urban mobility, buildings and energy supply systems. Procedures are applied to the case study of Agua Branca urban development area, located in Sao Paulo, Brazil. Findings – In the case of Agua Branca area, energy efficiency measures in buildings have shown to be very important mostly for the buildings economies themselves. For the area as a whole, strategies in promoting public transport are more effective in terms of energy efficiency and also to decrease pollutant emissions. Originality/value – Literature review has shown there is a lack of approaches and procedures able to support urban energy planning at a community scale. The bottom-up method presented in this paper integrates a plenty of disaggregated and multisectoral parameters at the same stage in urban planning and shows that is possible to identify the most promising actions by building overall performance indexes.

Sign in / Sign up

Export Citation Format

Share Document