scholarly journals Biogas Production by Anaerobic Fermentation of Hotel Food Wastes

2020 ◽  
Vol 0 (0) ◽  
pp. 0-0
Author(s):  
Wagih Salama ◽  
Essam Abdelsalam
2009 ◽  
Vol 55 (No. 2) ◽  
pp. 62-68 ◽  
Author(s):  
J. Kára ◽  
Z. Pastorek ◽  
J. Mazancová ◽  
I. Hanzlíková

The basis of the biogas production in agriculture is the processing of waste agricultural products (particularly excrements of farm animals but also phytomass). Different but rather similar is the biogas production from biologically degradable municipal waste (BDMW) and biologically degradable industrial waste (BDIW) coming mainly from food industry. The processing of these wastes in agricultural biogas stations could significantly improve their economy. It is necessary to note that all these biogas stations differ from the wastewater cleaning plants where municipal sludge water from public sewers is processed. The municipal sludge water processing to biogas by anaerobic fermentation is a classical technology introduced all over the world. At present, about 100 wastewater cleaning plants operate in the Czech Republic using regular sludge processing into biogas. Electricity produced is utilised mainly for the needs of own operation of waste water treatment plant (WWTP), partly it is sold into public power net. The heat energy is used for heating in the process and its surplus is utilised for operational and administrative facilities. Usually, the heat and electricity quantities produced do not cover the wastewater cleaning plant operation. Agricultural biogas stations and biogas stations for BDMW processing provide considerably higher gas yields because they work with higher dry matter contents in substratum, i.e. 8–12% (compared with waste water treatment plants – 2–6%), and are able to produce high gas surpluses for following applications. Frequently discussed issue are the processing of slaughter waste and grass (or public green areas at biogas stations).


Author(s):  
Monika Hejna ◽  
Elisabetta Onelli ◽  
Alessandra Moscatelli ◽  
Maurizio Bellotto ◽  
Cinzia Cristiani ◽  
...  

Sustainable agriculture is aimed at long-term crop and livestock production with a minimal impact on the environment. However, agricultural practices from animal production can contribute to global pollution due to heavy metals from the feed additives that are used to ensure the nutritional requirements and also promote animal health and optimize production. The bioavailability of essential mineral sources is limited; thus, the metals are widely found in the manure. Via the manure, metallic ions can contaminate livestock wastewater, drastically reducing its potential recycling for irrigation. Phytoremediation, which is an efficient and cost-effective cleanup technique, could be implemented to reduce the wastewater pollution from livestock production, in order to maintain the water conservation. Plants use various strategies for the absorption and translocation of heavy metals, and they have been widely used to remediate livestock wastewater. In addition, the pollutants concentrated in the plants can be exhausted and used as heat to enhance plant growth and further concentrate the metals, making recycling a possible option. The biomass of the plants can also be used for biogas production in anaerobic fermentation. Combining phytoremediation and biorefinery processes would add value to both approaches and facilitate metal recovery. This review focuses on the concept of agro-ecology, specifically the excessive use of heavy metals in animal production, the various techniques and adaptations of the heavy-metal phytoremediation from livestock wastewater, and further applications of exhausted phytoremediated biomass.


2020 ◽  
Vol 180 ◽  
pp. 02019 ◽  
Author(s):  
Marzhan Temirbekova ◽  
Madina Aliyarova ◽  
Iliya Iliev ◽  
Aliya Yelemanova ◽  
Saule Sagintayeva

This paper justifies the efficiency of the biogas collection and utilization at the MSW (municipal solid waste) landfill in Almaty with the installation of several modern biogas plants. The optimal mode of processes occurring in a biogas plant is determined by computer generated simulations. Mathematical model parameters were identified to describe biochemical processes occurring in a biogas plant. Two approaches are used to resolve the mathematical model: the finite-difference method for solving the system of differential equations and simulation modeling by using the Any Logic package. A program is written in the algorithmic language C ++. Numerous calculations were carried out, the results of which are presented in curves and their qualitative picture is consistent with the ongoing processes. The created computer program allows to make a preliminary forecast of anaerobic fermentation occurring in the bioreactor depending on volume of the substrate, methane microorganisms and temperature conditions.


2019 ◽  
Vol 65 (No. 7) ◽  
pp. 369-376
Author(s):  
Marta Kupryś-Caruk ◽  
Sławomir Podlaski

The aim of the research was to determine the impact of double-cut harvest system on yield, as well as on suitability of Miscanthus × giganteus biomass for ensiling and biogas production. Biomass was harvested at the end of June (harvest I) and at the beginning of October (harvest II, regrowth). A single-cut regime at the end of October was also conducted. Biomass from harvests I and II was ensiled and subjected to anaerobic fermentation. The total dry matter (DM) yield from double-cut harvest system was similar to the DM yield from one-cut harvest, but two harvests per year had a positive effect on chemical composition of the biomass. C/N ratio and lignin content in the biomass from harvest I was lower compared to the single-cut biomass. Double harvest biomass was susceptible to ensiling, however, the biomass from harvest I characterized by low dry matter and water soluble sugars content resulted in poorer quality of the obtained silage (butyric acid was present). There were no significant differences between the methane yields obtained from ensiled biomass from harvests I and II.


2018 ◽  
Vol 10 (10) ◽  
pp. 3566
Author(s):  
Chia-Chi Chang ◽  
Yen-Hau Chen ◽  
Yi-Shiou Lin ◽  
Zang-Sei Hung ◽  
Min-Hao Yuan ◽  
...  

Autoclaving of food wastes (FW) for the resource recovery and reutilization was studied using the pilot plant scale. Experiments were conducted at various temperatures of 408, 428, and 438 K and times of 15 and 60 min. The in-filled steam to the autoclave was supplied by the incineration plant with a gauge pressure of 7 kg/cm2 and a temperature of 443 K or above. The results obtained from the experiments show that the less energy- and time-consuming autoclaving conditions (408 K and 15 min, denoted as Case A408-15) are effective. Comparisons of the properties and characteristics of autoclaved FW (FWA) of Case A408-15 with those of FW are made. The wet bulk volume and wet bulk density of FW A are dramatically reduced to 15.64% and increased to 313.37% relative to those of FW, respectively. This makes the subsequent processing and reuse for FWA more convenient than FW. The autoclaving results in an increase of carbon content and a decrease of nitrogen content, and thus an increase of the C/N ratio of FWA. The contents of sulfur, hemi-cellulose, and cellulose of FWA are also reduced. All these fluctuations are beneficial for making compost or other usages from FWA than FW. The autoclaved liquid product (LA) separated from FWA and liquid condensate (LC) from the released gas possess high COD and TOC. These two liquids can be mixed for use as liquid fertilizers with proper conditioning. Alternatively, further anaerobic digestion of the mixture of FWA, LA, and LC can offer enhanced biogas production for power generation. All these thus match the appeal of sustainable materials management and circular economy. The emitted gas from autoclaving contains no CO and some hydrocarbons. Suitable air pollution control is needed. The results and information obtained are useful for the proper recovery and reuse of abundant food wastes from domestic households and food industries.


Sign in / Sign up

Export Citation Format

Share Document