Biological leaching of heavy metals from anaerobically digested sewage sludge using indigenous sulfur-oxidizing bacteria and sulfur waste in a closed system

2001 ◽  
Vol 43 (2) ◽  
pp. 59-65 ◽  
Author(s):  
K. Kitada ◽  
A. Ito ◽  
K. Yamada ◽  
J. Aizawa ◽  
T. Umita
Keyword(s):  
Heavy Metals ◽  
Sewage Sludge ◽  
Closed System ◽  
Elemental Sulfur ◽  
Sewage Treatment ◽  
Sewage Treatment Plant ◽  
Treatment Plant ◽  
Sulfur Oxidizing ◽  
Digested Sewage Sludge ◽  
Sulfur Oxidizing Bacteria

The utilization of indigenous sulfur-oxidizing bacteria and sulfur waste was investigated in order to remove heavy metals from anaerobically digested sewage sludge economically. Indigenous sulfur-oxidizing bacteria existing in anaerobically digested sewage sludge were activated by adding elemental sulfur to the sludge and then the bacteria were isolated. It was found that indigenous sulfur-oxidizing bacteria could utilize sulfur waste generated by desulfurization of digestion gas as a substrate. Then, biological leaching of heavy metals from anaerobically digested sewage sludge was carried out using indigenous sulfur-oxidizing bacteria and sulfur waste. By adding sulfur waste to sewage sludge, sulfuric acid was produced by the bacteria and the sludge pH decreased. Heavy metals in sewage sludge were effectively removed owing to the decrease of pH. The optimum amount of sulfur waste added to decrease the pH sufficiently was 5g/L when the sludge concentration was 2%. It was presented that the biological leaching of heavy metals from sewage sludge can be carried out in a closed system, where all required materials are obtained in a sewage treatment plant.

scholarly journals Regulatory and technological prerequisites of the use of sewage sludge for the production of organic fertilizers

2020 ◽  
pp. 162-170
Author(s):  
R. Edgecock ◽  
V. V. Bratishko ◽  
I. V. Zinchenko ◽  
S. H. Karpus ◽  
D. O. Milko ◽  
...  
Keyword(s):  
Heavy Metals ◽  
Sewage Sludge ◽  
Municipal Wastewater ◽  
Raw Materials ◽  
Sewage Treatment ◽  
Sewage Treatment Plant ◽  
Treatment Plant ◽  
Raw Material ◽  
Organic Fertilizers ◽  
Mineral Fertilizers

Annotation Purpose. Summarize the regulatory and technological requirements for the production of organic (organo-mineral) fertilizers on the base of sewage sludge. Methods. Analysis and generalization of the requirements of regulatory documents on the management of organic waste and their use as raw materials for the production of organic fertilizers and soil improvers. Results. The current legislative, departmental and regulatory documentary base in Ukraine concerning the treatment of sediment resulting from biological sewage treatment at municipal wastewater treatment plants for its further use in agriculture as fertilizers is analysed. Indicators are identified and analysed to determine the possibility, feasibility, efficiency and scope of organic fertilizers produced using sewage sludge. The analysis of changes in the content of organic matter and total nitrogen in the sewage sludge during its storage at the sewage treatment plant sites is presented. The technological feasibility of using sludge of different shelf life in composting production has been determined. Conclusions 1. The regulatory framework of Ukraine contains a sufficiently complete list of indicators that should be met by organic raw materials (sewage sludge) for further use as organic fertilizers. Some of these indicators – bio security and heavy metals content – can be improved in the composting process of fertilizers. 2. Fresh sediment, as well as sediment accumulated in the last late autumn and winter periods, is of main value for use as a raw material in the production of organic fertilizers. 3. The use in the production of compost sludge stored on sludge sites for a period of half a year or more requires special control of the process of decontamination. In this case, it is advisable to use additional means of wastewater decontamination. Keywords: heavy metals, manure, humus, decontamination, composting, organic fertilizers, sewage sludge.

scholarly journals RISK ANALYSIS OF ACCUMULATION OF HEAVY METALS FROM SEWAGE SLUDGE IN SOIL FROM THE SEWAGE TREATMENT PLANT IN STARACHOWICE

2019 ◽  
Vol 11 (4) ◽  
pp. 287-295
Author(s):  
ROBERT KOWALIK ◽  
◽  
JAROSŁAW GAWDZIK ◽  
BARBARA GAWDZIK ◽  
◽  
...  
Keyword(s):  
Heavy Metals ◽  
Sewage Sludge ◽  
Risk Analysis ◽  
Sewage Treatment ◽  
Sewage Treatment Plant ◽  
Treatment Plant

scholarly journals The immobilisation of heavy metals from sewage sludge ash in geopolymer mortars

2020 ◽  
Vol 322 ◽  
pp. 01026
Author(s):  
Mateusz Sitarz ◽  
Tomasz Zdeb ◽  
João Castro Gomes ◽  
Erick Grünhäuser Soares ◽  
Izabela Hager
Keyword(s):  
Heavy Metals ◽  
Sewage Sludge ◽  
Municipal Wastewater ◽  
Sewage Treatment ◽  
Sewage Treatment Plant ◽  
Treatment Plant ◽  
Fluidised Bed ◽  
The European Union ◽  
Sewage Sludge Ash ◽  
Sludge Ash

Sewage sludge is a semi-solid waste material created as a result of the sewage treatment of industrial or municipal wastewater. Because the laws and regulations of the European Union require not only a reduction in waste generation but also the preparation of waste for reuse and disposal, it is necessary to look for new methods of the application of sewage sludge as part of sustainable waste management. In this study, ash formed as a result of the combustion of sewage sludge from the sewage treatment plant in Płaszów, Krakow in a fluidised bed furnace at a temperature of around 800°C was used. Sewage sludge ash (SSA) contains over 30% SiO2 and approx. 10% Al2O3, which indicates potential applications in geopolymer materials. In this study, samples of geopolymer mortars with a binder containing sewage sludge ash as well as fly ash (FA) and ground granulated blast furnace slag (GGBFS) were prepared. The mechanical parameters were determined after 2, 7, 14, and 28 days. The results show that the sewage sludge ash-based geopolymer shows binding properties at ambient temperature and, depending on the presence of FA and/or GGBFS, the compressive strength varies from 5 to 45 MPa after 28 days. The aim of the research was also to determine the total content of heavy metals (Sb, As, Cr, Cd, Cu, Ni, Pb, Hg, Zn) in the raw materials used and their leachability from the structure of the hardened materials. Immobilisation of heavy metals is very promising. Based on the results of tests, it seems possible to use SSA in geopolymer materials, but not as the main component of the binder.

Basic investigation on the chemical forms of heavy metals in a sewage treatment plant

2000 ◽  
Vol 42 (9) ◽  
pp. 159-165 ◽  
Author(s):  
H. Morita ◽  
H. Tsuboi
Keyword(s):  
Heavy Metals ◽  
Sewage Sludge ◽  
Sewage Treatment ◽  
Sewage Treatment Plant ◽  
Treatment Plant ◽  
Energy Resource ◽  
Point Of View ◽  
Raw Material ◽  
Chemical Forms ◽  
Basic Study

Sewage sludge mainly consists of organic matter, and it is rich in nutrients. Therefore, sewage sludge is beneficial as an energy resource and as a raw material for fertilizer. However, heavy metals in it are the obstacle to utilization of sludge. This study was conducted in order to know the chemical forms of heavy metals and their behavior in a sewage treatment plant as a basic study for development of technology to reduce heavy metals in sludge. Chemical methods and biological methods, such as extraction using acid, bacteria leaching, are applied to reduce heavy metals. In using these methods, the efficiency depends on the chemical forms of heavy metals. From this point of view, factors, which affect the chemical forms of heavy metals, were investigated through the survey at some plants of different conditions. Besides, experiments on the anaerobic digestion process, in which the chemical forms of heavy metals were expected to change, were conducted. As the results of these studies, it was found that the chemical forms of heavy metals and their behavior vary according to the species of heavy metals. In comparison of zinc (Zn), copper (Cu) and nickel (Ni), Cu was found to be changed most easily into a stable chemical form such as carbonate and sulfide. Zn was the second to Cu in its tendency to be stabilized. As for Ni, the tendency was further less than Zn.

scholarly journals ANALYSIS OF THE MOBILITY OF HEAVY METALS IN SLUDGE FOR THE SEWAGE TREATMENT PLANT IN DALESZYCE

2020 ◽  
Vol 12 (2) ◽  
pp. 85-92
Author(s):  
ROBERT KOWALIK ◽  
JAROSŁĄW GAWDZIK ◽  
BARBARA GAWDZIK ◽  
ALICJA GAWDZIK
Keyword(s):  
Heavy Metals ◽  
Wastewater Treatment ◽  
Sewage Sludge ◽  
Wastewater Treatment Plant ◽  
Metal Content ◽  
Sewage Treatment ◽  
Sewage Treatment Plant ◽  
Treatment Plant ◽  
Total Metal Content ◽  
Treatment Processes

Sewage sludge is a by-product of wastewater treatment processes. However, it has high fertilising and soil-forming properties, but it cannot always be used for this purpose. The two main criteria limiting their natural use are heavy metals and parasite eggs. Sewage sludge taken from the Daleszyce wastewater treatment plant has been analysed for heavy metals. For this purpose a space analysis was performed to divide the total metal content into four mobility fractions. The mobility issue determines the ability of an element, or one of its forms, to move in the environment. The studies were performed using a four-stage BCR procedure. The results were analyzed and compared to the limits applicable in Poland for sewage sludge intended for environmental use.

Effect of Wastewater on the Soil and Irrigation Process: A Laboratory Study

2017 ◽  
Vol 1 (1) ◽  
pp. 46-55 ◽  
Author(s):  
Athar Hussain ◽  
Manjeeta Priyadarshi ◽  
Saif Said ◽  
Suraj Negi
Keyword(s):  
Heavy Metals ◽  
Tap Water ◽  
Sewage Treatment ◽  
Daily Intake ◽  
Sewage Treatment Plant ◽  
Treatment Plant ◽  
Treated Wastewater ◽  
Surface Water Resources ◽  
Industrial Sewage ◽  
Concentration Levels

Most of the industrial sewage effluents used for irrigation contains heavy metals which cause toxicity to crop plants as the soils are able to accumulate heavy metal for many years. The vegetables grown for the present study were irrigated with treated wastewater brought from a nearby full-scale sewage treatment plant at different compositions along with tap water as a control. The concentration levels of the Cd, Co, Cu, Mn and Zn in the soil were found to below the toxic limits as prescribed in literature. Daily Intake Metals (DIM) values suggest that the consumption of plants grown in treated wastewater and tap water is nearly free of risks, as the dietary intake limits of Cu, Fe, Zn and Mn. The Enrichment Factor for the treated wastewater irrigated soil was found in order Zn> Ni> Pb> Cr> Cu> Co> Mn> Cd. Thus, treated wastewater can be effectively used for irrigation. This will have twofold significant environmental advantages: (1) helpful to reduce the groundwater usage for irrigation and (2) helpful to reduce the stress on surface water resources.

Operational Results of Melting System for Sewage Sludge

1991 ◽  
Vol 23 (10-12) ◽  
pp. 1773-1781 ◽  
Author(s):  
Daisaku Yashiki ◽  
Tadahiro Murakami
Keyword(s):  
Sewage Sludge ◽  
Sewage Treatment ◽  
Sewage Treatment Plant ◽  
Treatment Plant ◽  
Melting Furnace ◽  
Effective Utilization ◽  
History Of ◽  
Sludge Properties ◽  
Operation Results

Sludge melting furnaces have been applied recently to the treatment of a great deal of sludge generated from the sewage treatment plant. In this report, an explanation is provided of the history of system introduction, outline of treatment flow, sludge properties, operation results and effective utilization of slag generated at the reflector melting furnace, which began operation in July 1988 at the Futakami Sewage Treatment Plant in Toyama Prefecture. The melting furnace almost totally satisfies the needs of its design, and the properties of the generated melted slag exhibit the features that fully enable its effective utilization.

Conditioning of oily sludges with municipal solid wastes incinerator fly ash

1997 ◽  
Vol 35 (8) ◽  
pp. 231-238 ◽  
Author(s):  
Tay Joo Hwa ◽  
S. Jeyaseelan
Keyword(s):  
Heavy Metals ◽  
Fly Ash ◽  
Specific Resistance ◽  
Sewage Treatment ◽  
Sewage Treatment Plant ◽  
Treatment Plant ◽  
Solid Wastes ◽  
Municipal Solid Wastes ◽  
Capillary Suction ◽  
Optimum Dosage

Conditioning of sludges improves dewatering characteristics and reduces the quantity of sludge to be handled. Anaerobic digested sludge collected from a sewage treatment plant contained 1.8% to 8% oil. The increase of specific resistance and capillary suction time (CST) with increasing oil content observed in these samples indicates the interference of oil in dewatering. It has been found that addition of municipal solid wastes incinerator fly ash decreases the specific resistances and capillary suction times of oily sludges rapidly up to 3% dosage. Beyond 3% fly ash, the decrease is less significant and the solids content in the sludge cake increases. This optimum dosage remains the same for sludges with varying oil contents from 1.8% to 12%. The total suspended solids of filtrate decreases with fly ash dosage but the toxic concentrations of heavy metals increases considerably. However at the optimum dosage of 3%, concentrations of heavy metals are within the limits for discharging into the sewers. The correlations of CST with the dewatering characteristics such as specific resistance, filter yield and corrected filter yield are established. These correlations can be used to obtain a quick prediction on dewaterability.

The determination of heavy metals in domestic sewage treatment plant wastes

1973 ◽  
Vol 2 (4) ◽  
pp. 473-482 ◽  
Author(s):  
J. C. Van Loon ◽  
J. Lichwa ◽  
D. Ruttan ◽  
J. Kinrade
Keyword(s):  
Heavy Metals ◽  
Sewage Treatment ◽  
Sewage Treatment Plant ◽  
Treatment Plant ◽  
Domestic Sewage
Sign in / Sign up

Export Citation Format

Share Document