Biological nitrification and denitrification of opto-electronic industrial wastewater

2003 ◽  
Vol 48 (8) ◽  
pp. 27-34 ◽  
Author(s):  
T.-K. Chen ◽  
C.-H. Ni ◽  
J.-N. Chen
Keyword(s):  
Wastewater Treatment ◽  
Industrial Wastewater ◽  
Organic Nitrogen ◽  
Wastewater Treatment Plants ◽  
Biological Nutrient Removal ◽  
Nitrogen And Phosphorus ◽  
Mixed Liquor ◽  
The Past ◽  
Two Factors ◽  
Recycle Rate

Development and application of biological nutrient removal processes accelerated significantly over the past decade due to more stringent nutrients (nitrogen and phosphorus) discharge limits being imposed on wastewater treatment plants. The opto-electronic industry has developed very fast over the past decade in the world. The wastewater often contains a significant quantity of organic nitrogen compounds and has a ratio of over 95% in organic nitrogen (Org-N) to total nitrogen (T-N). In this study, a 2-stage Anoxic/Aerobic pre-denitrification process was established and the efficiency of wastewater treatment was evaluated. Wastewater from an actual LCD-plant was obtained as the sample for looking into the feasibility of opto-electronic industrial wastewater treatment. Hydraulic retention time (HRT) and mixed liquor recycle rate (MLR) were controlled independently to distinguish between the effects of these two factors. Under suitable HRT and mixed liquor recycle ratio, effluents of NH4-N, NOx-N and COD can fall below 20 mg/l, 30 mg/l and 80 mg/l.

Upgrading Wastewater Treatment Plants for Biological Nutrient Removal

1990 ◽  
Vol 22 (7-8) ◽  
pp. 53-60 ◽  
Author(s):  
B. Rabinowitz ◽  
T. D. Vassos ◽  
R. N. Dawson ◽  
W. K. Oldham
Keyword(s):  
Wastewater Treatment ◽  
Nutrient Removal ◽  
Wastewater Treatment Plants ◽  
Design Flow ◽  
Biological Nutrient Removal ◽  
Nitrogen And Phosphorus ◽  
Conventional Activated Sludge ◽  
Recent Developments ◽  
Removal Technology ◽  
Biological Nitrogen

A brief review of recent developments in biological nitrogen and phosphorus removal technology is presented. Guidelines are outlined of how current understanding of these two removal mechanisms can be applied in the upgrading of existing wastewater treatment plants for biological nutrient removal. A case history dealing with the upgrading of the conventional activated sludge process located at Penticton, British Columbia, to a biological nutrient removal facility with a design flow of 18,200 m3/day (4.0 IMGD) is presented as a design example. Process components requiring major modification were the headworks, bioreactors and sludge handling facilities.

High-strength nitrogen removal of opto-electronic industrial wastewater in membrane bioreactor - a pilot study

2003 ◽  
Vol 48 (1) ◽  
pp. 191-198 ◽  
Author(s):  
T.K. Chen ◽  
C.H. Ni ◽  
J.N. Chen ◽  
J. Lin
Keyword(s):  
Wastewater Treatment ◽  
Industrial Wastewater ◽  
Organic Nitrogen ◽  
Membrane Bioreactor ◽  
High Strength ◽  
Experimental Period ◽  
Ammonia Nitrogen ◽  
Nitrifying Bacteria ◽  
Biological Degradation ◽  
The Past

The membrane bioreactor (MBR) system has become more and more attractive in the field of wastewater treatment. It is particularly attractive in situations where long solids retention times are required, such as nitrifying bacteria, and physical retention critical to achieving more efficiency for biological degradation of pollutant. Although it is a new technology, the MBR process has been applied for industrial wastewater treatment for only the past decade. The opto-electronic industry, developed very fast over the past decade in the world, is high technology manufacturing. The treatment of the opto-electronic industrial wastewater containing a significant quantity of organic nitrogen compounds with a ratio over 95% in organic nitrogen (Org-N) to total nitrogen (T-N) is very difficult to meet the discharge limits. This research is mainly to discuss the treatment capacity of high-strength organic nitrogen wastewater, and to investigate the capabilities of the MBR process. A 5 m3/day capacity of MBR pilot plant consisted of anoxic, aerobic and membrane bioreactor was installed for evaluation. The operation was continued for 150 days. Over the whole experimental period, a satisfactory organic removal performance was achieved. The COD could be removed with an average of over 94.5%. For TOC and BOD5 items, the average removal efficiencies were 96.3 and 97.6%, respectively. The nitrification and denitrification was also successfully achieved. Furthermore, the effluent did not contain any suspended solids. Only a small concentration of ammonia nitrogen was found in the effluent. The stable effluent quality and satisfactory removal performance mentioned above were ensured by the efficient interception performance of the membrane device incorporated within the biological reactor. The MBR system shows promise as a means of treating very high organic nitrogen wastewater without dilution. The effluent of TKN, NOx-N and COD can fall below 20 mg/L, 30 mg/L and 50 mg/L.

scholarly journals Integrated Omic Analyses Provide Evidence that a “Candidatus Accumulibacter phosphatis” Strain Performs Denitrification under Microaerobic Conditions

mSystems ◽  
2019 ◽  
Vol 4 (1) ◽  
Author(s):  
Pamela Y. Camejo ◽  
Ben O. Oyserman ◽  
Katherine D. McMahon ◽  
Daniel R. Noguera
Keyword(s):  
Wastewater Treatment ◽  
Energy Use ◽  
Wastewater Treatment Plants ◽  
Cost Effective ◽  
Biological Nutrient Removal ◽  
Nitrogen And Phosphorus ◽  
Biological Removal ◽  
Cost Effective Alternative ◽  
Accumulibacter Phosphatis ◽  
Microaerobic Conditions

“CandidatusAccumulibacter phosphatis” is widely found in full-scale wastewater treatment plants, where it has been identified as the key organism for biological removal of phosphorus. Since aeration can account for 50% of the energy use during wastewater treatment, microaerobic conditions for wastewater treatment have emerged as a cost-effective alternative to conventional biological nutrient removal processes. Our report provides strong genomics-based evidence not only that “Ca. Accumulibacter phosphatis” is the main organism contributing to phosphorus removal under microaerobic conditions but also that this organism simultaneously respires nitrate and oxygen in this environment, consequently removing nitrogen and phosphorus from the wastewater. Such activity could be harnessed in innovative designs for cost-effective and energy-efficient optimization of wastewater treatment systems.

Application of a membrane bioreactor system for opto-electronic industrial wastewater treatment - a pilot study

2003 ◽  
Vol 48 (8) ◽  
pp. 195-202 ◽  
Author(s):  
T.K. Chen ◽  
J.N. Chen ◽  
C.H. Ni ◽  
G.T. Lin ◽  
C.Y. Chang
Keyword(s):  
Wastewater Treatment ◽  
Industrial Wastewater ◽  
Organic Nitrogen ◽  
Membrane Bioreactor ◽  
Manufacturing Industry ◽  
Ammonia Nitrogen ◽  
Nitrifying Bacteria ◽  
Biological Degradation ◽  
Industrial Wastewater Treatment ◽  
The Past

The membrane bioreactor (MBR) system has become more and more attractive in the field of wastewater treatment. It is particularly attractive in situations where long solids retention times are required, such as nitrifying bacteria, and physical retention is critical to achieving more efficiency for biological degradation of pollutants. Although it is a new technology, the MBR process has been applied to industrial wastewater treatment for only the past decade. The opto-electronic industry, developed very fast over the past decade in the world, is a high technological manufacturing industry. The treatment of the opto-electronic industrial wastewater containing a significant quantity of organic nitrogen compounds, with a ratio over 95% in organic nitrogen (Org-N) to total nitrogen (T-N), is very difficult to meet the discharge limits. The purpose of this research is mainly to discuss the treatment capacity of high-strength organic nitrogen wastewater, and to investigate the capabilities of the MBR process. A 2 m3/day capacity MBR pilot plant consisting of anoxic and aerobic tanks and a membrane bioreactor was installed for evaluation. The operation was continued for 130 days. Over the whole experimental period, a satisfactory organic removal performance was achieved. The COD could be removed with an average of over 94.5%. For TOC and BOD5, the average removal efficiencies were 96.3 and 97.6%, respectively. The nitrification and denitrification were also successfully achieved. The effluent did not contain any suspended solids. Only a small concentration of ammonia nitrogen was found in the effluent. The stable effluent quality and satisfactory removal performance mentioned above were ensured by the efficient interception performance of the membrane device incorporated within the biological reactor. The MBR system shows promise as a means of treating very high organic nitrogen wastewater without dilution. The effluent of TKN, NOx-N and COD can fall below 20 mg/L, 30 mg/L and 50 mg/L.

scholarly journals Benchmarking biological nutrient removal in wastewater treatment plants: influence of mathematical model assumptions

2012 ◽  
Vol 65 (8) ◽  
pp. 1496-1505 ◽  
Author(s):  
Xavier Flores-Alsina ◽  
Krist V. Gernaey ◽  
Ulf Jeppsson
Keyword(s):  
Wastewater Treatment ◽  
Electron Acceptor ◽  
Nutrient Removal ◽  
Wastewater Treatment Plants ◽  
Treatment Plant ◽  
Critical Discussion ◽  
Decay Rates ◽  
Biological Nutrient Removal ◽  
Nitrogen And Phosphorus ◽  
Reference Case

This paper examines the effect of different model assumptions when describing biological nutrient removal (BNR) by the activated sludge models (ASM) 1, 2d & 3. The performance of a nitrogen removal (WWTP1) and a combined nitrogen and phosphorus removal (WWTP2) benchmark wastewater treatment plant was compared for a series of model assumptions. Three different model approaches describing BNR are considered. In the reference case, the original model implementations are used to simulate WWTP1 (ASM1 & 3) and WWTP2 (ASM2d). The second set of models includes a reactive settler, which extends the description of the non-reactive TSS sedimentation and transport in the reference case with the full set of ASM processes. Finally, the third set of models is based on including electron acceptor dependency of biomass decay rates for ASM1 (WWTP1) and ASM2d (WWTP2). The results show that incorporation of a reactive settler: (1) increases the hydrolysis of particulates; (2) increases the overall plant's denitrification efficiency by reducing the SNOx concentration at the bottom of the clarifier; (3) increases the oxidation of COD compounds; (4) increases XOHO and XANO decay; and, finally, (5) increases the growth of XPAO and formation of XPHA,Stor for ASM2d, which has a major impact on the whole P removal system. Introduction of electron acceptor dependent decay leads to a substantial increase of the concentration of XANO, XOHO and XPAO in the bottom of the clarifier. The paper ends with a critical discussion of the influence of the different model assumptions, and emphasizes the need for a model user to understand the significant differences in simulation results that are obtained when applying different combinations of ‘standard’ models.

Fate of Organic Nitrogen in Four Biological Nutrient Removal Wastewater Treatment Plants

2010 ◽  
Vol 82 (12) ◽  
pp. 2306-2315 ◽  
Author(s):  
Chakkrid Sattayatewa ◽  
Krishna Pagilla ◽  
Robert Sharp ◽  
Paul Pitt
Keyword(s):  
Wastewater Treatment ◽  
Nutrient Removal ◽  
Organic Nitrogen ◽  
Wastewater Treatment Plants ◽  
Biological Nutrient Removal

Experience with nutrient removal in a fixed-film system at full-scale wastewater treatment plants

1997 ◽  
Vol 36 (1) ◽  
pp. 129-137 ◽  
Author(s):  
Vibeke R. Borregaard
Keyword(s):  
Wastewater Treatment ◽  
Surface Area ◽  
Nutrient Removal ◽  
Wastewater Treatment Plants ◽  
High Specific Surface Area ◽  
Biological Nutrient Removal ◽  
Growth Processes ◽  
Total N ◽  
Attached Growth ◽  
On Line

In the upgrade of wastewater treatment plants to include biological nutrient removal the space available is often a limiting facor. It may be difficult to use conventional suspended growth processes (i.e. activated sludge) owing to the relatively large surface area required for these processes. Recent years have therefore seen a revived interest in treatment technologies using various types of attached growth processes. The “new” attached growth processes, like the Biostyr process, utilise various kinds of manufactured media, e.g. polystyrene granules, which offer a high specific surface area, and are therefore very compact. The Biostyr plants allow a combination of nitrification-denitrification and filtration in one and the same unit. The results obtained are 8 mg total N/l and an SS content normally below 10 mg/l. The plants in Denmark which have been extended with a Biostyr unit have various levels of PLC control and on-line instrumentation.

Sign in / Sign up

Export Citation Format

Share Document