Electrochemical degradation of 4-chlorophenol in aqueous solution using modified PbO2 anode

2012 ◽  
Vol 66 (11) ◽  
pp. 2468-2474 ◽  
Author(s):  
X. Y. Duan ◽  
F. Ma ◽  
L. M. Chang
Keyword(s):  
Aqueous Solution ◽  
Electrochemical Oxidation ◽  
Current Density ◽  
Supporting Electrolyte ◽  
Positive Influence ◽  
Applied Current ◽  
Applied Current Density ◽  
Toc Removal ◽  
First Order Kinetics ◽  
Pbo2 Electrode

The electrochemical oxidation of 4-chlorophenol (4-CP) in aqueous solution was studied by electrochemical oxidation using modified PbO2 electrode as anode. The influence of several operating parameters, such as initial 4-CP concentration, applied current density, and supporting electrolyte (Na2SO4) concentration was investigated. Ultraviolet spectroscopy and total organic carbon (TOC) measurements were conducted to study the kinetics of 4-CP electrochemical reaction and the mineralization efficiency of 4-CP. The experimental results showed that the 4-CP degradation always followed a pseudo-first-order kinetics. The higher mineralization of 4-CP and the lower current efficiency (CE) were obtained by the lower initial 4-CP concentration. The applied current density showed a positive influence on the degradation of 4-CP and the removal of TOC, but a higher applied current density led to a lower CE. Although Na2SO4 concentration of 0.05 M resulted in a higher 4-CP and TOC removal, the result of one-way analysis of variance (ANOVA) indicates that Na2SO4 concentration is not the significant parameter for 4-CP removal in electrochemical oxidation.

scholarly journals Ecotoxicological Evaluation of Methiocarb Electrochemical Oxidation

2020 ◽  
Vol 10 (21) ◽  
pp. 7435
Author(s):  
Annabel Fernandes ◽  
Christopher Pereira ◽  
Susana Coelho ◽  
Celso Ferraz ◽  
Ana C. Sousa ◽  
...  
Keyword(s):  
Electrochemical Oxidation ◽  
Current Density ◽  
Removal Rate ◽  
Supporting Electrolyte ◽  
Ecological Effects ◽  
Applied Current ◽  
Boron Doped Diamond ◽  
Experimental Conditions ◽  
Applied Current Density ◽  
Toxicity Reduction

The ecotoxicity of methiocarb aqueous solutions treated by electrochemical oxidation was evaluated utilizing the model organism Daphnia magna. The electrodegradation experiments were performed using a boron-doped diamond anode and the influence of the applied current density and the supporting electrolyte (NaCl or Na2SO4) on methiocarb degradation and toxicity reduction were assessed. Electrooxidation treatment presented a remarkable efficiency in methiocarb complete degradation and a high potential for reducing the undesirable ecological effects of this priority substance. The reaction rate followed first-order kinetics in both electrolytes, being more favorable in a chloride medium. In fact, the presence of chloride increased the methiocarb removal rate and toxicity reduction and favored nitrogen removal. A 200× reduction in the acute toxicity towards D. magna, from 370.9 to 1.6 toxic units, was observed for the solutions prepared with NaCl after 5 h treatment at 100 A m−2. An increase in the applied current density led to an increase in toxicity towards D. magna of the treated solutions. At optimized experimental conditions, electrooxidation offers a suitable solution for the treatment and elimination of undesirable ecological effects of methiocarb contaminated industrial or agricultural wastewaters, ensuring that this highly hazardous pesticide is not transferred to the aquatic environment.

scholarly journals Electrochemical oxidation of sulfamethoxazole using Ti/SnO2-Sb/Co-PbO2 electrode through ANN-PSO

2019 ◽  
Vol 84 (7) ◽  
pp. 713-727 ◽  
Author(s):  
Jiteng Wan ◽  
Chunji Jin ◽  
Banghai Liu ◽  
Zonglian She ◽  
Mengchun Gao ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Electrochemical Oxidation ◽  
Removal Efficiency ◽  
Current Density ◽  
Ph Value ◽  
Ann Model ◽  
Solution Ph ◽  
Pbo2 Electrode ◽  
Artificial Neural Network Ann ◽  
Major Factors

Even in a trace amounts, the presence of antibiotics in aqueous solution is getting more and more attention. Accordingly, appropriate technologies are needed to efficiently remove these compounds from aqueous environments. In this study, we have examined the electrochemical oxidation (EO) of sulfamethoxazole (SMX) on a Co modified PbO2 electrode. The process of EO of SMX in aqueous solution followed the pseudo-first-order kinetics, and the removal efficiency of SMX reached the maximum value of 95.1 % within 60 min. The effects of major factors on SMX oxidation kinetics were studied in detail by single-factor experiments, namely current density (1?20 mA cm-2), solution pH value (2?10), initial concentration of SMX (10?500 mg L-1) and concentration of electrolytes (0.05?0.4 mol L-1). An artificial neural network (ANN) model was used to simulate this EO process. Based on the obtained model, particle swarm optimization (PSO) was used to optimize the operating parameters. The maximum removal efficiency of SMX was obtained at the optimized conditions (e.g., current density of 12.37 mA cm-2, initial pH value of 4.78, initial SMX concentration of 74.45 mg L-1, electrolyte concentration of 0.24 mol L-1 and electrolysis time of 51.49 min). The validation results indicated that this method can ideally be used to optimize the related parameters and predict the anticipated results with acceptable accuracy.

scholarly journals Anodic oxidation of slaughterhouse wastewater on boron-doped diamond: process variables effect

2017 ◽  
Vol 76 (12) ◽  
pp. 3227-3235 ◽  
Author(s):  
Arwa Abdelhay ◽  
Inshad Jum'h ◽  
Enas Abdulhay ◽  
Akeel Al-Kazwini ◽  
Mashael Alzubi
Keyword(s):  
Current Density ◽  
Supporting Electrolyte ◽  
Cod Removal ◽  
Color Removal ◽  
Process Variables ◽  
Applied Current ◽  
Boron Doped Diamond ◽  
Turbidity Removal ◽  
Applied Current Density ◽  
Boron Doped

Abstract A non-sacrificial boron-doped diamond electrode was prepared in the laboratory and used as a novel anode for electrochemical oxidation of poultry slaughterhouse wastewater. This wastewater poses environmental threats as it is characterized by a high content of recalcitrant organics. The influence of several process variables, applied current density, initial pH, supporting electrolyte nature, and concentration of electrocoagulant, on chemical oxygen demand (COD) removal, color removal, and turbidity removal was investigated. Results showed that raising the applied current density to 3.83 mA/cm2 has a positive effect on COD removal, color removal, and turbidity removal. These parameters increased to 100%, 90%, and 80% respectively. A low pH of 5 favored oxidants generation and consequently increased the COD removal percentage to reach 100%. Complete removal of COD had occurred in the presence of NaCl (1%) as supporting electrolyte. Na2SO4 demonstrated lower efficiency than NaCl in terms of COD removal. The COD decay kinetics follows the pseudo-first-order reaction. The simultaneous use of Na2SO4 and FeCl3 decreased the turbidity in wastewater by 98% due to electrocoagulation.

scholarly journals Electrochemical oxidation and electroanalysis of paracetamol on a boron-doped diamond anode material in aqueous electrolytes

2021 ◽  
Author(s):  
Kouakou Etienne Kouadio ◽  
Ollo Kambiré ◽  
Konan Sylvestre Koffi ◽  
Lassine Ouattara
Keyword(s):  
Electrolyte Solution ◽  
Current Density ◽  
Supporting Electrolyte ◽  
Current Intensity ◽  
Applied Current ◽  
Boron Doped Diamond ◽  
Preparative Electrolysis ◽  
Applied Current Density ◽  
Bdd Electrode ◽  
Boron Doped

Electrochemical oxidation of paracetamol on boron-doped diamond (BDD) anode has been studied by cyclic voltammetry and preparative electrolysis. Quantification of paracetamol during electrolysis has been mainly realized by differential pulse voltammetry technique in the Britton-Robinson buffer solutions used as the supporting electrolyte. Various parameters such as current intensity, nature of the supporting electrolyte, temperature, and initial concentration of paracetamol have been investigated. The electrochemical characterization by the outer sphere Fe(III)/Fe(II) redox couple has also been performed, showing the metallic character of BDD electrode. The obtained linear dependency of the oxidation peak current intensity and paracetamol concentration indicates that BDD electrode can be used as an electrochemical sensor for the detection and quantification of paracetamol. The investi­gation of paracetamol degradation during preparative electrolysis showed that: (i) the degradation rate of paracetamol increases with increase of current intensity applied; (ii) for the initial concentrations of 10, 6 and 1 mM of paracetamol, its oxidation rate reaches 60, 78 and 99 % respectively, after 1 h of electrolysis in 0.3 M H2SO4 (pH 0.6) at applied current density of 70 mA cm-2; (iii) at temperatures of electrolyte solution of 28, 55 and 75 °C, paracetamol oxidation rate reached 85, 92 and 97 % respectively, after 2 h at applied current density of 70 mA cm2. From the investigation of the effect of pH value of electrolyte solution, it appears that oxidation of paracetamol is more favorable in acidic solution at pH 3 than solutions of higher pH values.

scholarly journals Degradation of Rhodamine B Dye Solution by Photoelectrocoagulation Treatment Techniques

2019 ◽  
Vol 31 (5) ◽  
pp. 1095-1099
Author(s):  
K. Vijayakumar ◽  
S. Geetha ◽  
M. Govindaraj
Keyword(s):  
Current Density ◽  
Rhodamine B ◽  
Treatment Time ◽  
Supporting Electrolyte ◽  
Operating Time ◽  
Applied Current ◽  
Applied Current Density ◽  
Sem Image ◽  
Treatment Techniques ◽  
Rhodamine B Dye

Photoelectrocoagulation treatment of aqueous solution containing, rhodamine B has been studied. Three different supporting electrolytes such as NaCl, NaNO3 and Na2SO4 were used for electrolysis. Only NaCl was found to be effective for the removal of colour from rhodamine B dye. Effects of the process variables such as pH, applied current density, electrode material, supporting electrolytes types, different concentration of electrolyte and treatment time were explored in order to find the best conditions for the degradation of rhodamine B. The complete degradation was obtained in 35 min of operating time for Fe electrode at optimum conditions such as initial pH 7.0, supporting electrolyte of 0.05 M NaCl and applied current density of 10 mA/cm2 and treatment time of 35 min. Sludge characterization was analyzed by FT-IR spectra and the morphology of sludge was characterized by SEM were discussed. The SEM image confirmed the characteristics of phases, which are amorphous or poorly crystalline in nature.

scholarly journals Methiocarb Degradation by Electro-Fenton: Ecotoxicological Evaluation

Molecules ◽  
2020 ◽  
Vol 25 (24) ◽  
pp. 5893
Author(s):  
Faléstine Souiad ◽  
Ana Sofia Rodrigues ◽  
Ana Lopes ◽  
Lurdes Ciríaco ◽  
Maria José Pacheco ◽  
...  
Keyword(s):  
Current Density ◽  
Iron Concentration ◽  
Model Organism ◽  
Anodic Current Density ◽  
Applied Current ◽  
Boron Doped Diamond ◽  
Applied Current Density ◽  
Toxic Units ◽  
Boron Doped ◽  
Ecotoxicological Evaluation

This paper studies the degradation of methiocarb, a highly hazardous pesticide found in waters and wastewaters, through an electro-Fenton process, using a boron-doped diamond anode and a carbon felt cathode; and evaluates its potential to reduce toxicity towards the model organism Daphnia magna. The influence of applied current density and type and concentration of added iron source, Fe2(SO4)3·5H2O or FeCl3·6H2O, is assessed in the degradation experiments of methiocarb aqueous solutions. The experimental results show that electro-Fenton can be successfully used to degrade methiocarb and to reduce its high toxicity towards D. magna. Total methiocarb removal is achieved at the applied electric charge of 90 C, and a 450× reduction in the acute toxicity towards D. magna, on average, from approximately 900 toxic units to 2 toxic units, is observed at the end of the experiments. No significant differences are found between the two iron sources studied. At the lowest applied anodic current density, 12.5 A m−2, an increase in iron concentration led to lower methiocarb removal rates, but the opposite is found at the highest applied current densities. The highest organic carbon removal is obtained at the lowest applied current density and added iron concentration.

Electrochemical Oxidation of Azo Dye Wastewater Using Graphene-Based Electrode Materials

2019 ◽  
Vol 19 (11) ◽  
pp. 7308-7314
Author(s):  
Jinyan Li ◽  
Qingsong Guan ◽  
Junming Hong ◽  
Chang-Tang Chang
Keyword(s):  
Electrochemical Oxidation ◽  
Current Density ◽  
Electrode Materials ◽  
Supporting Electrolyte ◽  
Performance Comparison ◽  
Carbon Cloth ◽  
Reactive Black 5 ◽  
Dye Wastewater ◽  
Composite Electrodes ◽  
Initial Concentration

Composite electrodes with different graphene (GN)/TiO2 ratios and nano-activated carbon electrodes were prepared for electrocatalytic performance comparison. The electrodes were loaded with platinum (Pt) by use of chloroplatinic acid to promote their performance. Reactive Black 5 (RBk5) dye wastewater was treated as a challenging pollutant by use of advanced electrochemical oxidation technology. The composite materials were characterized by Transmission Electron Microscope (TEM), Field Emission Scanning Electron Microscopy (FE-SEM), and Energy Disperse Spectroscopy (EDS). Results showed that the graphene electrode was prepared successfully and verified because all elements were uniformly loaded on the conductive carbon cloth. The effects of several operating parameters including material types, pH, initial concentration of RBk5, and current density on the removal performance of RBk5 were also assessed. The supporting electrolyte was NaCl solution of 1 g L−1. The concentration of RBk5 was detected using an ultraviolet spectrophotometer with a detection wavelength of 600 nm. The optimum parameters of the experiment were GN/TiO2 ratio of 1:4 and pH of 6.6. The removal efficiency of RBk5 could be higher than 95% under an initial concentration of RBk5 of 5 ppm and a current density of 2.5 mA·cm-2 when reaction time was 30 min.

Electrodeposition of Polyhedral Copper Crystals on Porous Silicon

2011 ◽  
Vol 181-182 ◽  
pp. 434-438
Author(s):  
Ming Meng ◽  
Yuan Ming Huang
Keyword(s):  
Porous Silicon ◽  
Current Density ◽  
Copper Chloride ◽  
Applied Current ◽  
Sem Images ◽  
Copper Crystal ◽  
Applied Current Density ◽  
Current Density Range ◽  
Tentative Explanation ◽  
Copper Crystals

Electrochemical deposition of copper from copper chloride aqueous electrolyte on porous silicon (PS) substrate was investigated in the current density range of 5 mA/cm2to 35 mA/cm2. Scanning electron microscopy (SEM) was utilized to characterize the surface morphology of as-electrodeposited PS. SEM images illustrate that the applied current density has a profound influence on the shape of copper crystal electrodeposited on the top surface of PS films. When the applied current density was fixed at 5mA/cm2, most of the copper crystals are in the shape of cube along with a small number of cuboid-shape. With the increasing current density, cuboid-shaped copper crystals gradually vanished. When the current density is up to the 35mA/cm2, we surprisingly observe that the cube shape predominates simultaneously with the emergence of truncated tetrahedron. A tentative explanation for the growth mechanism of copper crystal having various shapes is explored.

Sign in / Sign up

Export Citation Format

Share Document