Hydrodynamic evaluation of a full-scale facultative pond by computational fluid dynamics (CFD) and field measurements

2014 ◽  
Vol 70 (3) ◽  
pp. 569-575 ◽  
Author(s):  
Ricardo Gomes Passos ◽  
Marcos von Sperling ◽  
Thiago Bressani Ribeiro
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Short Circuit ◽  
Field Measurements ◽  
Tracer Test ◽  
Full Scale ◽  
Cfd Model ◽  
Cfd Modelling ◽  
Hydraulic Behaviour ◽  
Computational Fluid Dynamics Cfd

Knowledge of the hydraulic behaviour is very important in the characterization of a stabilization pond, since pond hydrodynamics plays a fundamental role in treatment efficiency. An advanced hydrodynamics characterization may be achieved by carrying out measurements with tracers, dyes and drogues or using mathematical simulation employing computational fluid dynamics (CFD). The current study involved experimental determinations and mathematical simulations of a full-scale facultative pond in Brazil. A 3D CFD model showed major flow lines, degree of dispersion, dead zones and short circuit regions in the pond. Drogue tracking, wind measurements and dye dispersion were also used in order to obtain information about the actual flow in the pond and as a means of assessing the performance of the CFD model. The drogue, designed and built as part of this research, and which included a geographical positioning system (GPS), presented very satisfactory results. The CFD modelling has proven to be very useful in the evaluation of the hydrodynamic conditions of the facultative pond. A virtual tracer test allowed an estimation of the real mean hydraulic retention time and mixing conditions in the pond. The computational model in CFD corresponded well to what was verified in the field.

Computational Fluid Dynamics Modelling for the Prediction of NOx in a Waste Gas Boiler

2016 ◽  
Author(s):  
Adam Blackmore ◽  
Jennifer Woloshyn ◽  
Duane Baker
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Nitrogen Oxides ◽  
Field Measurements ◽  
Industrial Scale ◽  
Nox Emissions ◽  
Cfd Modelling ◽  
Waste Gas ◽  
Computational Fluid Dynamics Cfd ◽  
Dynamics Modelling

Recent results from CFD modelling of a waste gas boiler (WGB) to predict Nitrogen Oxides (NOx) emissions are presented. A verification / validation discussion is highlighted comparing the computational fluid dynamics (CFD) modelling with field measurements of NOx and flame characteristics. Challenges associated with the accurate prediction of NOx emissions are discussed along with the ability of CFD to accurately model emissions from an industrial scale WGB.

Characterisation of Cell Adhesion to Substrate Materials and the Resistance to Enzymatic and Mechanical Cell-Removal

2008 ◽  
Vol 1097 ◽  
Author(s):  
Helen Jane Griffiths ◽  
John G Harvey ◽  
James Dean ◽  
James A Curran ◽  
Athina E Markaki ◽  
...  
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Cell Adhesion ◽  
Liquid Flow ◽  
Adhesive Strength ◽  
Cell Detachment ◽  
Shear Forces ◽  
Cfd Modelling ◽  
Computational Fluid Dynamics Cfd

AbstractCell-implant adhesive strength is important for prostheses. In this paper, an investigation is described into the adhesion of bovine chondrocytes to Ti6Al4V-based substrates with different surface roughnesses and compositions. Cells were cultured for 2 or 5 days, to promote adhesion. The ease of cell removal was characterised, using both biochemical (trypsin) and mechanical (accelerated buoyancy and liquid flow) methods. Computational fluid dynamics (CFD) modelling has been used to estimate the shear forces applied to the cells by the liquid flow. A comparison is presented between the ease of cell detachment indicated using these methods, for the three surfaces investigated.

Validation of a Computationally Efficient Computational Fluid Dynamics (CFD) Model for Industrial Bubble Column Bioreactors

2014 ◽  
Vol 53 (37) ◽  
pp. 14526-14543 ◽  
Author(s):  
Dale D. McClure ◽  
Hannah Norris ◽  
John M. Kavanagh ◽  
David F. Fletcher ◽  
Geoffrey W. Barton
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Bubble Column ◽  
Cfd Model ◽  
Computationally Efficient ◽  
Computational Fluid Dynamics Cfd

scholarly journals Journal Bearing: An Integrated CFD-Analytical Approach for the Estimation of the Trajectory and Equilibrium Position

2020 ◽  
Vol 10 (23) ◽  
pp. 8573
Author(s):  
Franco Concli
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Pressure Distribution ◽  
Equilibrium Position ◽  
Analytical Approach ◽  
Journal Bearing ◽  
Cfd Model ◽  
Cavitation Model ◽  
Computational Fluid Dynamics Cfd ◽  
The Mathematical Model

For decades, journal bearings have been designed based on the half-Sommerfeld equations. The semi-analytical solution of the conservation equations for mass and momentum leads to the pressure distribution along the journal. However, this approach admits negative values for the pressure, phenomenon without experimental evidence. To overcome this, negative values of the pressure are artificially substituted with the vaporization pressure. This hypothesis leads to reasonable results, even if for a deeper understanding of the physics behind the lubrication and the supporting effects, cavitation should be considered and included in the mathematical model. In a previous paper, the author has already shown the capability of computational fluid dynamics to accurately reproduce the experimental evidences including the Kunz cavitation model in the calculations. The computational fluid dynamics (CFD) results were compared in terms of pressure distribution with experimental data coming from different configurations. The CFD model was coupled with an analytical approach in order to calculate the equilibrium position and the trajectory of the journal. Specifically, the approach was used to study a bearing that was designed to operate within tight tolerances and speeds up to almost 30,000 rpm for operation in a gearbox.

An Improved Computational Fluid Dynamics (CFD) Model for Erosion Prediction in Oil and Gas Industry Applications

2014 ◽  
Author(s):  
Deval Pandya ◽  
Brian Dennis ◽  
Ronnie Russell
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Surface Velocity ◽  
Particle Model ◽  
Model Parameters ◽  
Cfd Model ◽  
Erosion Model ◽  
Erosion Prediction ◽  
Erosion Models ◽  
Computational Fluid Dynamics Cfd

In recent years, the study of flow-induced erosion phenomena has gained interest as erosion has a direct influence on the life, reliability and safety of equipment. Particularly significant erosion can occur inside the drilling tool components caused by the low particle loading (<10%) in the drilling fluid. Due to the difficulty and cost of conducting experiments, significant efforts have been invested in numerical predictive tools to understand and mitigate erosion within drilling tools. Computational fluid dynamics (CFD) is becoming a powerful tool to predict complex flow-erosion and a cost-effective method to re-design drilling equipment for mitigating erosion. Existing CFD-based erosion models predict erosion regions fairly accurately, but these models have poor reliability when it comes to quantitative predictions. In many cases, the error can be greater than an order of magnitude. The present study focuses on development of an improved CFD-erosion model for predicting the qualitative as well as the quantitative aspects of erosion. A finite-volume based CFD-erosion model was developed using a commercially available CFD code. The CFD model involves fluid flow and turbulence modeling, particle tracking, and application of existing empirical erosion models. All parameters like surface velocity, particle concentration, particle volume fraction, etc., used in empirical erosion equations are obtained through CFD analysis. CFD modeling parameters like numerical schemes, turbulence models, near-wall treatments, grid strategy and discrete particle model parameters were investigated in detail to develop guidelines for erosion prediction. As part of this effort, the effect of computed results showed good qualitative and quantitative agreement for the benchmark case of flow through an elbow at different flow rates and particle sizes. This paper proposes a new/modified erosion model. The combination of an improved CFD methodology and a new erosion model provides a novel computational approach that accurately predicts the location and magnitude of erosion. Reliable predictive methodology can help improve designs of downhole equipment to mitigate erosion risk as well as provide guidance on repair and maintenance intervals. This will eventually lead to improvement in the reliability and safety of downhole tool operation.

Application of Computational Fluid Dynamics Simulations to the Analysis of Bank Effects in Restricted Waters

2009 ◽  
Vol 62 (3) ◽  
pp. 477-491 ◽  
Author(s):  
D. C. Lo ◽  
Dong-Taur Su ◽  
Jan-Ming Chen
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Cfd Modelling ◽  
Bank Effect ◽  
Force Increase ◽  
Computational Fluid Dynamics Simulations ◽  
Computational Fluid Dynamics Cfd ◽  
Dynamics Simulations ◽  
Yaw Angle ◽  
Vessel Speed

It is well known that vessels operating in the vicinity of a lateral bank experience a significant yaw moment and sway force. This bank effect has a major impact on the manoeuvring properties of the vessel and must therefore be properly understood to ensure the safe passage of the vessel through the restricted waterway. Accordingly, this study performs a series of simulations using commercial FLOW-3D® computational fluid dynamics (CFD) software and the KRISO 3600 TEU container ship model to examine the effects of the vessel speed and distance to bank on the magnitude and time-based variation of the yaw angle and sway force. The results show that for a given vessel speed, the yaw angle and sway force increase as the distance to bank reduces, while for a given distance between the ship and the bank, the yaw angle and sway force increase with an increasing vessel speed. In addition, it is shown that even when a vessel advances at a very low speed, it experiences a significant bank effect when operating in close vicinity to the bank. Overall, the results presented in this study confirm the feasibility of the CFD modelling approach as a means of obtaining detailed insights into the bank effect without the need for time-consuming and expensive ship trials.

Sign in / Sign up

Export Citation Format

Share Document