scholarly journals Synthesis of a magnetic polystyrene-based cation-exchange resin and its utilization for the efficient removal of cadmium (II)

2018 ◽  
Vol 2017 (3) ◽  
pp. 770-781 ◽  
Author(s):  
Zhaohe Wang ◽  
Shilei Ding ◽  
Zhixia Li ◽  
Fuwei Li ◽  
Tingting Zhao ◽  
...  
Keyword(s):  
Cation Exchange ◽  
Exchange Resin ◽  
Cation Exchange Resin ◽  
Freundlich Isotherm ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Initial Concentration ◽  
Adsorption Processes ◽  
Order Kinetic Model ◽  
Styrene Divinylbenzene

Abstract A magnetic cation-exchange resin (MCER) was prepared by copolymerization of oleic acid-grafted magnetite with styrene, divinylbenzene (DVB), and triallylisocyanurate (TAIC) for removing Cd(II) from wastewater. A non-magnetic cation-exchange polystyrene resin (CEPR) was also prepared as a reference. Structural and morphological analyses revealed that the MCER and CEPR were mesoporous microspheres; the MCER contained about 25% Fe3O4. The influence of temperature, pH, contact time, and the initial concentration of Cd(II) on the adsorption of Cd(II) was investigated. The maximum adsorption capacity of the MCER reached 88.56 mg/g, which was achieved at 343 K using a Cd(II) initial concentration of 200 mg/L. The adsorption processes attained equilibrium within 120 min for the MCER and 300 min for the CEPR, and were well described by a pseudo-second-order kinetic model. Furthermore, the equilibrium adsorption data fitted the Freundlich isotherm model better than the Langmuir model. The superior magnetic response and regeneration of the MCER make it a good candidate as an adsorbent for removing Cd(II) from wastewater.

scholarly journals Adsorption of l-α-glycerophosphocholine on ion-exchange resin: Equilibrium, kinetic, and thermodynamic studies

2020 ◽  
Vol 9 (1) ◽  
pp. 275-282
Author(s):  
Hongya Li ◽  
Biao Yan ◽  
Yajun Ma ◽  
Xiangrong Ma ◽  
Xiaoli Zhang ◽  
...  
Keyword(s):  
Experimental Data ◽  
Exchange Resin ◽  
Cation Exchange Resin ◽  
Freundlich Isotherm ◽  
Entropy Change ◽  
Ion Exchange Resin ◽  
Isotherm Models ◽  
Order Kinetic ◽  
Equilibrium Data ◽  
Order Kinetic Model

AbstractThe adsorption of l-α-glycerophosphocholine (GPC) by cation-exchange resin 001 × 7 was studied in a batch system. The adsorbent dosage, shaking speed, and adsorption temperature were investigated. An adsorption efficiency of more than 99.4% was obtained under optimal conditions. The kinetic data evaluated by the pseudo-second-order kinetic model fitted the experimental data better than those evaluated by the pseudo-first-order model. The rate constant k2 increased when the temperature increased, indicating the adsorption was endothermic in nature. The Langmuir and Freundlich isotherm models were used to analyze the adsorption equilibrium data, and it was found that the experimental data well fitted the Langmuir isotherm model. The thermodynamic parameters, enthalpy change (ΔG0), free energy change (ΔH0), and entropy change (ΔS0), were calculated. The value of ΔG0 was found to be in the range of −5.09 to −14.20 kJ mol−1, indicating that the adsorption was spontaneous and basically physisorption, and the positive values of ΔH0 and ΔS0 exhibited that the adsorption was endothermic and the randomness of the system increased during the adsorption.

scholarly journals Phenol adsorption from wastewater using cashew nut shells as adsorbent

2018 ◽  
Vol 7 (3) ◽  
pp. 966
Author(s):  
Kartik Kulkarni ◽  
Varsha Sudheer ◽  
C R Girish
Keyword(s):  
Agricultural Waste ◽  
Freundlich Isotherm ◽  
Isotherm Models ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Multilayer Adsorption ◽  
Phenol Adsorption ◽  
Cashew Nut ◽  
Experimental Parameters ◽  
Order Kinetic Model

The potential of agricultural waste cashew nut shells as an adsorbent for removing phenol from wastewater is presented in this paper. The adsorbent was treated with 3M sulphuric acid in order to improve the properties. The experimental parameters such as adsorbent dosage, concentration and temperature were optimized with response surface methodology (RSM). The isotherm data were tested with different isotherm models and it obeyed Freundlich Isotherm showing the multilayer adsorption. The kinetic data satisfied pseudo-first order kinetic model. The maximum adsorption capacity was calculated to be 35.08 mg/g proving the capability of cashew nut shells for removing phenol from wastewater.  

scholarly journals SURFACE MODIFICATION OF CANARIUM OVATUMENGL.(PILI) SHELL AS ADSORBENT OF LEAD(Pb2+) FROM AQUEOUS SOLUTION

2021 ◽  
Author(s):  
Ernesto Jr. S. Cajucom ◽  
◽  
Lolibeth V. Figueroa ◽  
Keyword(s):  
Aqueous Solution ◽  
Adsorption Capacity ◽  
Freundlich Isotherm ◽  
Cost Effective ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Carboxylic Groups ◽  
Equilibrium Data ◽  
Order Kinetic Model ◽  
Surface Modified

This study was carried out to investigate the efficiency of raw pili shell (RPS) and the surface modified pili shell using EDTA (EMPS) and oxalic acid (OMPS). A comparative study on the adsorption capacity of the adsorbents was performed against lead (Pb2+) from aqueous solution. The adsorbents were characterized by FTIR, which showed higher peak of adsorption bands of carboxylic groups on the acid modified pili shells. Scanning electron microscope orSEM was also used to describe the surface morphology of the adsorbents. The linear form of Langmuir and Freundlich models were applied to represent adsorption data. The calculated equilibrium data of Pb (II) best fitted to Langmuir compare to Freundlich isotherm model with maximum adsorption capacity (qmax) of 27.03 mg/g and 45.45 mg/g using EMPS and OMPS, respectively. Kinetic sorption models were used to determine the adsorption mechanism and the kinetic data of all the adsorbents correlated (R2=1) wellwith the pseudo second order kinetic model. Among the three adsorbents, OMPS shown higher percent removal of lead compared to RPS and EMPS. The large adsorption capacity rate indicated that chemically modified pili shell in present study has great potential to be used as a cost-effective adsorbent for the removal of lead ions from the water.

scholarly journals Adsorption Behaviour of Chromium(VI) onto Surface Modified Sugarcane Waste

2013 ◽  
Vol 28 (1-2) ◽  
pp. 113-122
Author(s):  
Kedar Nath Ghimire ◽  
Deepak Wagle ◽  
Suman Lal Shrestha
Keyword(s):  
Volume Ratio ◽  
Freundlich Isotherm ◽  
Batch Adsorption ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Adsorption Method ◽  
Chromium Vi ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Surface Modified

An effective chemically modified adsorbent based on sugarcane waste has been prepared by treating with concentrated sulphuric acid in 2:1weight/volume ratio. Thus prepared adsorbent has been found to be effective in the adsorption of chromium from aqueous medium. The efficacy of the adsorbent in the removal of chromium was evaluated by batch adsorption method. The effect of initial concentration, contact time and pH of the solution was investigated. The maximum adsorption capacity onto this adsorbent was found to be 195 mg/g at their optimal pH 1 at which unmodified bagasse has only 58 mg/g. The characterization of adsorbent was done by determining surface area and Boehm’s titration method. Freundlich isotherm and pseudo-second order kinetic model gave better explanation of the adsorption process.

Adsorption of Cobalt onto Bacillus cereus: Application of Isotherm and Kinetic Models

2011 ◽  
Vol 230-232 ◽  
pp. 1169-1172
Author(s):  
Yuan Hong Wang ◽  
Hui Li Zhu ◽  
Fang Xia
Keyword(s):  
Bacillus Cereus ◽  
Practical Implication ◽  
Freundlich Isotherm ◽  
Isotherm Models ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Order Kinetic Model ◽  
Isotherm And Kinetic Models ◽  
Economic Technology ◽  
Best Fit

Batch experiments were carried out to determine the capacity of Bacillus cereus biomass to adsorb Co(II) ions from aqueous solution with respect to pH, initial Co(II) concentration, contact time and biomass dose. The experimental data were modeled by Langmuir and Freundlich isotherm models. Langmuir model resulted in the best fit of the adsorption data. The maximum adsorption capacity for Co(II) was 68.10 mg/g. The best correlation was provided by the second-order kinetic model. The practical implication of this study is the development of an effective and economic technology for Co(II) removal from contaminated waters.

scholarly journals Separation of matrine and oxymatrine from Sophora flavescens extract through cation exchange resin coupled with macroporous absorption resin

2016 ◽  
Vol 18 (2) ◽  
pp. 31-39 ◽  
Author(s):  
Haohao Chen ◽  
Shaojian Luo ◽  
Xikang Zheng ◽  
Huajun Fan
Keyword(s):  
Cation Exchange ◽  
Crude Extract ◽  
Exchange Resin ◽  
Cation Exchange Resin ◽  
Freundlich Isotherm ◽  
Sophora Flavescens ◽  
Macroporous Resin ◽  
Foreign Matter ◽  
Simple Method ◽  
Adsorption Data

Abstract A simple method for separation of matrine and oxymatrine from Sophora flavescens was developed with cation exchange resin coupled with macroporous resin. Based on the adsorption characteristics of matrine and oxymatrine, 001×732 cation exchange resin was used to absorb target alkaloids for removing most of the foreign matter, while BS-65 macroporous resin was chosen to purify these alkaloids. The result showed that the equilibrium adsorption data of matrine and oxymatrine on 001×732 resin and BS-65 resin at 30°C was fitted to Langmuir isotherm and Freundlich isotherm, respectively. The contents of matrine and oxymatrine were increased from 0.73% and 2.2% in the crude extract of the root of Sophora flavescens to 67.2% and 66.8% in the final eluent products with the recoveries of 90.3% and 86.9%, respectively.

scholarly journals Barium/Cobalt@Polyethylene Glycol Nanocomposites for Dye Removal from Aqueous Solutions

Polymers ◽  
2021 ◽  
Vol 13 (7) ◽  
pp. 1161
Author(s):  
Somayeh Rahdar ◽  
Abbas Rahdar ◽  
Mostafa Sattari ◽  
Laleh Divband Hafshejani ◽  
Athanasia K. Tolkou ◽  
...  
Keyword(s):  
Polyethylene Glycol ◽  
Aqueous Solutions ◽  
Removal Efficiency ◽  
Contact Time ◽  
Skin Diseases ◽  
Freundlich Isotherm ◽  
Order Kinetic ◽  
Initial Concentration ◽  
Adsorbent Dosage ◽  
Order Kinetic Model

Dyes are known as one of the most dangerous industrial pollutants which can cause skin diseases, allergy, and provoke cancer and mutation in humans. Therefore, one of the important environmental issues is the effective removal of dyes from industrial wastewater. In the current work, BaFe12O19/CoFe2O4@polyethylene glycol (abbreviated as BFO/CFO@PEG) nanocomposite was synthesized and evaluated regarding its capacity for adsorptive removal of a model dye Acid Blue 92 (denoted as AB92) from aqueous solutions. The characteristics of the prepared nanocomposite was determined by tests such as X-ray diffraction (XRD), scanning electron microscope (SEM), vibration sample magnetization (VSM), and Fourier transform infrared spectroscopy (FTIR). The effects of conditional parameters including pH (2–12), initial concentration of dye (20–100 mg/L), adsorbent dosage (0.02–0.1 g/L) and contact time (0-180 min) on the adsorption of dye were investigated and then optimized. The results indicated that with the increase of the adsorbent dosage from 0.02 to 0.1 g/L, the removal efficiency increased from 74.1% to 78.6%, and the adsorbed amount decreased from 148.25 to 31.44 mg/g. The maximum removal efficiency (77.54%) and adsorption capacity (31.02 mg/g) were observed at pH 2. Therefore, the general optimization conditions revealed that the maximum adsorption efficiency of dye was obtained in condition of initial concentration of 20 mg/L, contact time of 1 h and pH of solution equal 2. The adsorption isotherm and kinetic data were evaluated using a series of models. The pseudo-second order kinetic model and Freundlich isotherm model show the best fitting with experimental data with R2∼0.999.

Adsorption of Cobalt Ions onto Mycobacterium phlei from Wastewaters

2011 ◽  
Vol 71-78 ◽  
pp. 2249-2252 ◽  
Author(s):  
Yan Xing
Keyword(s):  
Practical Implication ◽  
Freundlich Isotherm ◽  
Isotherm Models ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Solution Ph ◽  
Cobalt Ions ◽  
Mycobacterium Phlei ◽  
Order Kinetic Model ◽  
Economic Technology

This fundamental work deals with the biosorption removal of Co(II) using a Mycobacterium phlei strain. Several variables that have an effect on the capacity of cobalt biosorption from aqueous solution by Mycobacterium phlei were studied. particularly the effects of solution pH, initial Co(II) concentration, contact time and biomass dose. The experimental data were modeled by Langmuir and Freundlich isotherm models. Langmuir model resulted in the best fit of the adsorption data. The maximum adsorption capacity for Co(II) was 68.22 mg/g. The best correlation was provided by the second-order kinetic model, implying that chemical sorption was the rate-limiting step. The practical implication of this study is the development of an effective and economic technology for Co(II) removal from wastewaters.

Sign in / Sign up

Export Citation Format

Share Document