scholarly journals SURFACE MODIFICATION OF CANARIUM OVATUMENGL.(PILI) SHELL AS ADSORBENT OF LEAD(Pb2+) FROM AQUEOUS SOLUTION

2021 ◽  
Author(s):  
Ernesto Jr. S. Cajucom ◽  
◽  
Lolibeth V. Figueroa ◽  
Keyword(s):  
Aqueous Solution ◽  
Adsorption Capacity ◽  
Freundlich Isotherm ◽  
Cost Effective ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Carboxylic Groups ◽  
Equilibrium Data ◽  
Order Kinetic Model ◽  
Surface Modified

This study was carried out to investigate the efficiency of raw pili shell (RPS) and the surface modified pili shell using EDTA (EMPS) and oxalic acid (OMPS). A comparative study on the adsorption capacity of the adsorbents was performed against lead (Pb2+) from aqueous solution. The adsorbents were characterized by FTIR, which showed higher peak of adsorption bands of carboxylic groups on the acid modified pili shells. Scanning electron microscope orSEM was also used to describe the surface morphology of the adsorbents. The linear form of Langmuir and Freundlich models were applied to represent adsorption data. The calculated equilibrium data of Pb (II) best fitted to Langmuir compare to Freundlich isotherm model with maximum adsorption capacity (qmax) of 27.03 mg/g and 45.45 mg/g using EMPS and OMPS, respectively. Kinetic sorption models were used to determine the adsorption mechanism and the kinetic data of all the adsorbents correlated (R2=1) wellwith the pseudo second order kinetic model. Among the three adsorbents, OMPS shown higher percent removal of lead compared to RPS and EMPS. The large adsorption capacity rate indicated that chemically modified pili shell in present study has great potential to be used as a cost-effective adsorbent for the removal of lead ions from the water.

scholarly journals Study on the adsorption of methylene blue from aqueous solution using hydrogel glucomannan/graphene oxide

2021 ◽  
Vol 10 (1) ◽  
pp. 59-66
Author(s):  
Son Le Lam ◽  
Phu Nguyen Vinh ◽  
Hieu Le Trung ◽  
Tan Le Thua ◽  
Nhan Dang Thi Thanh ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Methylene Blue ◽  
Graphene Oxide ◽  
Adsorption Capacity ◽  
Organic Dyes ◽  
Dye Adsorption ◽  
Order Kinetic ◽  
Equilibrium Data ◽  
Order Kinetic Model ◽  
Pseudo Second Order

Glucomannan/graphene oxide (GM/GO) hydrogel was synthesized by using calcium hydroxide as the crosslinker. The synthesized material was characterized by using IR, XRD, SEM, EDX and RAMAN technology. The composite hydrogel was used for removal of organic dyes from aqueous solution. The results showed that the GM/GO hydrogel had a porous structure and a high adsorption capacity toward methylene blue (MB). The pseudo-second-order kinetic model could fit the rate equation of MB adsorption onto the GM/GO hydrogel. The adsorption of MB onto GM/GO hydrogel was a spontaneous process. In addition, the equilibrium adsorption isotherm data indicated that equilibrium data were fitted to the Langmuir isotherm and the maximum dye adsorption capacity was 198,69 mg.g-1. Moreover, the hydrogel was stable and easily recovered and adsorption capacity was around 97% of the initial saturation adsorption capacity after being used five times.

Preparation of Graphene Oxide Modified Rice Husk for Cr(VI) Removal

2019 ◽  
Vol 19 (11) ◽  
pp. 7035-7043 ◽  
Author(s):  
Tong Ouyang ◽  
Jidan Tang ◽  
Fang Liu ◽  
Chang-Tang Chang
Keyword(s):  
Graphene Oxide ◽  
Adsorption Capacity ◽  
Rice Husk ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Adsorption Sites ◽  
Equilibrium Data ◽  
Order Kinetic Model ◽  
Alkaline Conditions ◽  
Rice Husk Biochar

The objective of this paper is to study the removal of Cr(VI) in aqueous solution by using a new graphene oxide-coated rice husk biochar composite (GO-RHB). GO-RHB is a synthetic material having a porous structure with lots of oxygen-containing functional groups and a large surface area that provide effective adsorption sites. Experiments showed that GO-RHB had higher adsorption capacity under acidic than under alkaline conditions. At pH of 2, GO-RHB has the maximum adsorption capacity(48.8 mg g−1). Equilibrium data obtained by fitting with the Langmuir and Freundlich models indicate that the reaction process was monolayer adsorption. The adsorption of Cr(VI) followed the pseudo-second-order kinetic model that illustrates chemical adsorption. Intraparticlediffusion studies further revealed that film diffusion was taking place. Moreover, the results of thermodynamics showed that the adsorption process was endothermic and spontaneous in nature. The removal mechanism of Cr(VI) was also explained in detail. The prepared adsorbent is highly efficient and might be useful than many other conventional adsorbent used for the removal of Cr(VI) from wastewater.

scholarly journals Adsorption Behaviour of Chromium(VI) onto Surface Modified Sugarcane Waste

2013 ◽  
Vol 28 (1-2) ◽  
pp. 113-122
Author(s):  
Kedar Nath Ghimire ◽  
Deepak Wagle ◽  
Suman Lal Shrestha
Keyword(s):  
Volume Ratio ◽  
Freundlich Isotherm ◽  
Batch Adsorption ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Adsorption Method ◽  
Chromium Vi ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Surface Modified

An effective chemically modified adsorbent based on sugarcane waste has been prepared by treating with concentrated sulphuric acid in 2:1weight/volume ratio. Thus prepared adsorbent has been found to be effective in the adsorption of chromium from aqueous medium. The efficacy of the adsorbent in the removal of chromium was evaluated by batch adsorption method. The effect of initial concentration, contact time and pH of the solution was investigated. The maximum adsorption capacity onto this adsorbent was found to be 195 mg/g at their optimal pH 1 at which unmodified bagasse has only 58 mg/g. The characterization of adsorbent was done by determining surface area and Boehm’s titration method. Freundlich isotherm and pseudo-second order kinetic model gave better explanation of the adsorption process.

Adsorption of methylene blue by using novel chitosan-g-itaconic acid/bentonite nanocomposite – equilibrium and kinetic study

2017 ◽  
Vol 75 (8) ◽  
pp. 1932-1943 ◽  
Author(s):  
Farzaneh Shakib ◽  
Ahmad Dadvand Koohi ◽  
Arash Kamran Pirzaman
Keyword(s):  
Methylene Blue ◽  
Adsorption Capacity ◽  
Itaconic Acid ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Oh Groups ◽  
Maximum Sorption ◽  
Equilibrium Data ◽  
Order Kinetic Model ◽  
The Fourier Transform

In this study, novel chitosan-g-itaconic acid/bentonite (CTS-g-IA/BT) and chitosan/bentonite (CTS/BT) nanocomposites were synthesized for adsorption of methylene blue (MB) from aqueous solution. The process was pH-sensitive and maximum sorption was obtained at pH 6 (CTS-g-IA/BT) and 7 (CTS/BT) in 76 h agitation time using 0.03 g of nanocomposites for 50 mL of MB solution. The results showed that in pH less than 6, the adsorption capacity of CTS-g-IA/BT nanocomposite due to the existence of IA monomer is less than that of CTS/BT nanocomposite. The Fourier transform infrared spectroscopy (FTIR) spectrum of CTS-g-IA/BT revealed that both itaconic acid and BT present in the nanocomposite structure, and also the –OH groups of BT, –NH2 and –OH of CTS participated in nanocomposite formation. According to the FTIR results, a schematic diagram of the nanocomposite synthesis was presented. The kinetic results indicated that the adsorption of MB fitted well with the pseudo-second-order kinetic model. The equilibrium data followed Langmuir isotherm with the maximum adsorption capacity of 500 and 181.818 mg/g for CTS-g-IA/BT and CTS/BT nanocomposites, respectively. The negative values of Gibbs free energy change (ΔG0) and the positive values of ΔH0 confirmed that the adsorption process is spontaneous and endothermic. The positive values of ΔS0 suggested the randomness of adsorption at interface.

Adsorption of leather dye onto activated carbon prepared from bottle gourd: equilibrium, kinetic and mechanism studies

2013 ◽  
Vol 67 (1) ◽  
pp. 201-209 ◽  
Author(s):  
Edson Luiz Foletto ◽  
Caroline Trevisan Weber ◽  
Diego Silva Paz ◽  
Marcio Antonio Mazutti ◽  
Lucas Meili ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Activated Carbon ◽  
Adsorption Capacity ◽  
Intraparticle Diffusion ◽  
Second Order ◽  
Adsorption Kinetic ◽  
Bottle Gourd ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Equilibrium Data

Activated carbon prepared from bottle gourd has been used as adsorbent for removal of leather dye (Direct Black 38) from aqueous solution. The activated carbon obtained showed a mesoporous texture, with surface area of 556.16 m2 g−1, and a surface free of organic functional groups. The initial dye concentration, contact time and pH significantly influenced the adsorption capacity. In the acid region (pH 2.5) the adsorption of dye was more favorable. The adsorption equilibrium was attained after 60 min. Equilibrium data were analyzed by the Langmuir, Freundlich, Dubinin–Radushkevich and Temkin isotherm models. The equilibrium data were best described by the Langmuir isotherm, with maximum adsorption capacity of 94.9 mg g−1. Adsorption kinetic data were fitted using the pseudo-first-order, pseudo-second-order, Elovich and intraparticle diffusion models. The adsorption kinetic was best described by the second-order kinetic equation. The adsorption process was controlled by both external mass transfer and intraparticle diffusion. Activated carbon prepared from bottle gourd was shown to be a promising material for adsorption of Direct Black 38 from aqueous solution.

scholarly journals Adsorption of Lead(II) Ions from Aqueous Solution onto Lignin

2009 ◽  
Vol 27 (4) ◽  
pp. 435-445 ◽  
Author(s):  
Laura Bulgariu ◽  
Dumitru Bulgariu ◽  
Theodor Malutan ◽  
Matei Macoveanu
Keyword(s):  
Aqueous Solution ◽  
Ion Concentration ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Solution Ph ◽  
Batch System ◽  
Equilibrium Data ◽  
Order Kinetic Model ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order

The adsorption of lead(II) ions from aqueous solution onto lignin was investigated in this study. Thus, the influence of the initial solution pH, the lignin dosage, the initial Pb(II) ion concentration and the contact time were investigated at room temperature (19 ± 0.5 °C) in a batch system. Adsorption equilibrium was approached within 30 min. The adsorption kinetic data could be well described by the pseudo-second-order kinetic model, while the equilibrium data were well fitted using the Langmuir isotherm model. A maximum adsorption capacity of 32.36 mg/g was observed. The results of this study indicate that lignin has the potential to become an effective and economical adsorbent for the removal of Pb(II) ions from industrial wastewaters.

scholarly journals Removal of Pb(II) by Pellicle-Like Biofilm-Producing Methylobacterium hispanicum EM2 Strain from Aqueous Media

Water ◽  
2019 ◽  
Vol 11 (10) ◽  
pp. 2081 ◽  
Author(s):  
Sun-Wook Jeong ◽  
Hyo Kim ◽  
Jung Yang ◽  
Yong Choi
Keyword(s):  
Aqueous Media ◽  
Freundlich Isotherm ◽  
Infrared Analysis ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Multilayer Adsorption ◽  
Drinking Water Contamination ◽  
Equilibrium Data ◽  
Order Kinetic Model ◽  
Pseudo Second Order

As concerns are increasing about drinking water contamination with heavy metals, we investigated the possible use of a pellicle (floating biofilm)-like biofilm-producing microorganism as a biosorbent for the treatment of Pb(II) in aqueous solutions. The bacterial pellicle-producing Methylobacterium hispanicum EM2 strain (EM2) was newly isolated from mine tailing soil, and we investigated its use as a biosorbent for treating a Pb(II)-contaminated aqueous solution. The EM2 strain was strongly resistant to Pb(II) up to a concentration of 800 mg/L, and achieved remarkable adsorption performance (adsorption rate and maximum adsorption capacity of 96% ± 3.2% and 79.84 mg/g, respectively) under optimal conditions (pH, biomass content, contact time, and initial Pb(II) concentration of 7.1 g/L, 60 min, and 10 mg/L, respectively). The adsorption of Pb(II) was characterized by scanning electron microscopy-energy dispersive x-ray spectroscopy and Fourier-transform infrared analysis. The equilibrium data matched the Freundlich isotherm model well, indicating the occurrence of multilayer adsorption of Pb(II) onto the heterogeneous surface of the EM2 strain, which was also consistent with the pseudo-second-order kinetic model (R2 = 0.98). The high Pb(II) removal efficiency was also confirmed by conducting an adsorption experiment using Pb(II)-contaminated industrial wastewater.

Sulfonic Acid Functionalized Magnetite Nanoporous-KIT-6 for Removal of Methyl Green from Aqueous Solutions

2018 ◽  
Vol 52 ◽  
pp. 54-70 ◽  
Author(s):  
Seyedeh Mahsa Seyed Danesh ◽  
Hossein Faghihian ◽  
Shahab Shariati
Keyword(s):  
Aqueous Solutions ◽  
Sulfonic Acid ◽  
Mesoporous Silica Nanoparticles ◽  
Freundlich Isotherm ◽  
Maximum Adsorption Capacity ◽  
Methyl Green ◽  
Order Kinetic ◽  
Equilibrium Data ◽  
Order Kinetic Model ◽  
Wastewater Samples

The sulfonic acid-functionalized KIT-6 magnetite mesoporous silica nanoparticles (Fe3O4@SiO2@KIT-6-SO3H NPs) were prepared as an adsorbent and used for the removal of methyl green from aqueous solutions. Characterization of the obtained adsorbent was done by FT-IR, SEM and EDX instruments. According to the experimental results, about 96.4 % of dye was removed from aqueous solutions at the adsorbent amount of 3.2 g L-1at pH = 3 and ionic strength = 0 during 10 min. The kinetic results indicated that the pseudo-second-order kinetic model was the best model for describing the adsorption kinetic ( = 0.9999). The isotherm analysis demonstrated that the equilibrium data were well fitted to the Freundlich isotherm model, showing a multilayer adsorption of the dye on the adsorbent surface. The maximum adsorption capacity for methyl green was obtained 196 mg g-1. Furthermore, the Fe3O4@SiO2-KIT-6-SO3H NPs could be simply recovered by external magnet and it exhibited recyclability and reusability for six cycles. The results showed that the Fe3O4@SiO2-KIT-6-SO3H NPs are appropriate adsorbent for removal of methyl green from real wastewater samples.

Adsorption of Phosphate onto Slag from Aqueous Solution

2012 ◽  
Vol 550-553 ◽  
pp. 2255-2258
Author(s):  
Bing Bing Liu ◽  
Hua Yong Zhang ◽  
Lu Yi Zhang
Keyword(s):  
Aqueous Solution ◽  
Adsorption Capacity ◽  
Adsorption Process ◽  
Freundlich Isotherm ◽  
Langmuir Model ◽  
Phosphate Adsorption ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
High Adsorption ◽  
Pseudo Second Order

Phosphate adsorption from aqueous solution using slag was investigated as the function of pH, contact time and adsorbent dosage. The results showed that the optimum value of pH was 2. Both Langmuir isotherm and Freundlich isotherm model were fit to describe the phosphate adsorption, and the maximum adsorption capacity from Langmuir model calculated was 9.09 mg/L. The adsorption process on slag followed pseudo second-order kinetic. Due to the relatively high adsorption capacity, the slag has the potential for application to removal phosphate from wastewater.

scholarly journals Lithium Biosorption by Arthrospira (Spirulina) Platensis Biomass

2020 ◽  
Vol 27 (2) ◽  
pp. 271-280
Author(s):  
Inga Zinicovscaia ◽  
Nikita Yushin ◽  
Ana Pantelica ◽  
Štefan Demčák ◽  
Andreea Mitu ◽  
...  
Keyword(s):  
Adsorption Capacity ◽  
Arthrospira Platensis ◽  
Maximum Adsorption Capacity ◽  
Lithium Content ◽  
Order Kinetic ◽  
Gamma Emission ◽  
Batch Systems ◽  
Equilibrium Data ◽  
Order Kinetic Model ◽  
Pseudo Second Order

AbstractThe biosorption of lithium from batch systems by Arthrospira (Spirulina) platensis biomass was studied. Adsorption capacity of the biosorbent was investigated as a function of contact time, initial metals concentration and pH values. Lithium content in biomass was determined using Proton Induced Gamma Emission technique. The ability of spirulina biomass for lithium biosorption showed a maximum at the pH = 11. Equilibrium data fitted well with the Langmuir model with maximum adsorption capacity of 1.75 mg/g, while the kinetic data were best described using the pseudo second-order kinetic model. The IR spectrum of the Li-loaded biomass revealed that lithium ions could be primarily bind to –OH, –COOH, –NH, –NH2, and –NH3 groups present on biosorbent surface. Arthrospira platensis biomass could be applied as environmentally friendly sorbent for lithium removal from wastewater.

Sign in / Sign up

Export Citation Format

Share Document