Performance of a newly enriched bacterial consortium for degrading and detoxifying azo dyes

2019 ◽  
Vol 79 (11) ◽  
pp. 2036-2045 ◽  
Author(s):  
Guang Guo ◽  
Fang Tian ◽  
Can Zhang ◽  
Tingfeng Liu ◽  
Feng Yang ◽  
...  

Abstract To obtain a bacterial consortium that can degrade azo dyes effectively, a bacterial consortium was enriched that can degrade Metanil yellow effectively. After 6 h, 96.25% Metanil yellow was degraded under static conditions by the bacterial consortium, which was mainly composed of Pseudomonas, Lysinibacillus, Lactococcus, and Dysgonomonas. In particular, Pseudomonas played a main role in the decolorization process. Co-substrate increased the decolorization rate, and yeast powder, peptone, and urea demonstrated excellent effects. The optimal pH value and salinity for the decolorization of azo dyes is 4–7 and 1% salinity respectively. The bacterial consortium can directly degrade many azo dyes, such as direct fast black G and acid brilliant scarlet GR. Azo reductase activity, laccase activity, and lignin peroxidase activity were estimated as the key reductase for decolorization, and Metanil yellow can be degraded into less toxic degradation products through synergistic effects. The degradation pathway of Metanil yellow was analyzed by Fourier transform infrared spectroscopy and gas chromatography–mass spectrometry, which demonstrated that Metanil yellow was cleaved at the azo bond, producing p-aminodiphenylamine and diphenylamine. These findings improved our knowledge of azo-dye-decolorizing microbial resources and provided efficient candidates for the treatment of dye-polluted wastewaters.

2018 ◽  
Vol 41 (11) ◽  
pp. 772-778 ◽  
Author(s):  
Sara R Knigge ◽  
Birgit Glasmacher

A lot of research has been done in the field of magnesium-based implant material. This study is focused on finding an explanation for the large disparity in results from similar experiments in literature. The hypothesis is that many different measurement protocols are used to quantify magnesium degradation and this leads to inconsistent results. Cylindrical, pure magnesium samples were used for this study. The degradation took place in revised simulated body fluid at 37°C. Hydrogen evolution was measured to quantify the degradation. Two commonly used experimental protocols were examined: static conditions and a fluid changing method. For static testing, the samples stayed in fluid. For the fluid changing method, the fluid was changed after 2 and 5 days of immersion. In addition, a new method with continuous fluid flow was established. After an initial phase, the results confirm that for all three methods, the degradation behavior differs strongly. The static condition results in a very slow degradation rate. The fluid change method leads to a similar behavior like the static condition except that the degradation was speeded up after the fluid changes. The continuous degradation is linear for a long period after the initial phase. In comparison with in vivo degradation behavior, the degradation process in continuous flow shows the best fitting. The accumulation of degradation products, especially the increasing pH value, has a strong inhibiting effect. This cannot be observed in vivo so that a constant experimental environment realizable by continuous flow is more suitable for magnesium-based implant material testing.


2017 ◽  
Vol 89 (3) ◽  
pp. 322-334
Author(s):  
Jiangang Qu ◽  
Nannan Li ◽  
Chunmei Wang ◽  
Jinxin He

Monitoring the light-induced decomposition course of azo dyes is essential to understand their degradation pathways and mechanisms. In this study, two model dyes are synthesized and used for stimulating the photodegradation processes of azo and hydrazone dyes, respectively. Their intermediates formed during initial and final fading processes are characterized by high-performance liquid chromatography-electrospray ionization-mass spectrometry, gas chromatography-mass spectrometry and ion chromatography. Results reveal that no dramatic differences are observed between the two dyes, although hydrazone dye would undergo a more complicated degradation process. Hydroxyl radicals are the dominant reactive species involved in the photodegradation of both model dyes under ultraviolet irradiation. In the initial steps, the intermediates are almost hydroxylated derivatives, while low-molecular-weight dicarboxylic acids and their hydroxylated and esterified derivatives, as well as non-volatile inorganic ions, are detected and evidenced in the final steps. Furthermore, photodegradation pathways and mechanisms for the two model dyes are proposed accordingly.


2020 ◽  
Vol 7 (9) ◽  
pp. 200688 ◽  
Author(s):  
Siqi Liu ◽  
Xiaolin Xu ◽  
Yanshun Kang ◽  
Yingtian Xiao ◽  
Huan Liu

Ligninolytic enzymes, including laccase (Lac), manganese peroxidase (MnP) and lignin peroxidase (LiP), have attracted much attention in the degradation of contaminants. Genes of Lac (1827 bp), MnP (1134 bp) and LiP (1119 bp) were cloned from Aspergillus sp. TS-A, and the recombinant Lac (69 kDa), MnP (45 kDa) and LiP (35 kDa) were secretory expressed in Pichia pastoris GS115, with enzyme activities of 34, 135.12 and 103.13 U l −1 , respectively. Dyes of different structures were treated via the recombinant ligninolytic enzymes under the optimal degradation conditions, and the result showed that the decolourization rate of Lac on Congo red (CR) in 5 s was 45.5%. Fourier-transform infrared spectroscopy, gas chromatography–mass spectrometry analysis and toxicity tests further proved that the ligninolytic enzymes could destroy the dyes, both those with one or more azo bonds, and the degradation products were non-toxic. Moreover, the combined ligninolytic enzymes could degrade CR more completely compared with the individual enzyme. Remarkably, besides azo dyes, ligninolytic enzymes could also degrade triphenylmethane and anthracene dyes. This suggests that ligninolytic enzymes from Aspergillus sp. TS-A have the potential for application in the treatment of contaminants.


Author(s):  
Tie-Hong Song ◽  
Yan-Jiao Gao ◽  
Su-Yan Pang ◽  
Rui-Hua Hu ◽  
Han-Bo Li

The degradation of bisphenol A (BPA) by Fe3O4/persulfate system was investigated in aqueous solution. The influences of the initial concentrations of Fe3O4, persulfate (PS) and BPA, pH value, and initial reaction temperature on BPA removal were studied. The radical species was investigated by adding excessive dose of scavenger (methanol (MeOH) and tert-butanol (TBA)) into Fe3O4/PS system for the purpose of radical scavenging. The degradation products of BPA were detected by gas chromatography-mass spectrometry (GC-MS). The recyclability of Fe3O4 was also evaluated. The BPA removal rate of 80.7% was achieved under the following conditions: [BPA]0 = 1 mg L-1, [PS]0 = 0.2 mM, [Fe3O4]0 = 0.1 g L-1, T0 = 20 ± 1 ºC, pH0 = 6.8 ± 0.2. The results confirmed that the main free radicals in the reaction process were sulfate radicals, followed by hydroxyl radicals. Some intermediate products of BPA degradation, such as phenols, benzoquinones and benzoic acid were identified by GC-MS.


2020 ◽  
Vol 316 ◽  
pp. 123923 ◽  
Author(s):  
Guang Guo ◽  
Jiuxiao Hao ◽  
Fang Tian ◽  
Chong Liu ◽  
Keqiang Ding ◽  
...  

Polymers ◽  
2018 ◽  
Vol 10 (11) ◽  
pp. 1265 ◽  
Author(s):  
Łukasz Zedler ◽  
Marek Klein ◽  
Mohammad Reza Saeb ◽  
Xavier Colom ◽  
Javier Cañavate ◽  
...  

Ground tire rubber (GTR) was mechano-chemically modified with road bitumen 160/220 and subsequently treated using a microwave radiation. The combined impact of bitumen 160/220 content and microwave treatment on short-term devulcanization of GTR was studied by thermal camera, wavelength dispersive X-ray fluorescence spectrometry (WD-XRF), static headspace, and gas chromatography-mass spectrometry (SHS-GC-MS), thermogravimetric analysis combined with Fourier transform infrared spectroscopy (TGA-FTIR), oscillating disc rheometer and static mechanical properties measurements. The obtained results showed that bitumen plasticizer prevents oxidation of GTR during microwave treatment and simultaneously improves processing and thermal stability of obtained reclaimed rubber.


2005 ◽  
Vol 67 (1) ◽  
pp. 55-61 ◽  
Author(s):  
M KHEHRA ◽  
H SAINI ◽  
D SHARMA ◽  
B CHADHA ◽  
S CHIMNI

Sign in / Sign up

Export Citation Format

Share Document