New Generation of Nitrite Functionalized Star-like Polyvinyl Imidazolium Compound: Application as a Nitrosonium Source and Three Dimensional Nanocatalyst for the Synthesis of Azo Dyes

2017 ◽  
Vol 14 (6) ◽  
Author(s):  
Ashkan Shomali ◽  
Hassan Valizadeh ◽  
Saeideh Noorshargh
Keyword(s):  
Azo Dyes ◽  
Three Dimensional ◽  
New Generation

Pavement Damage Due to Conventional and New Generation of Wide-Base Super Single Tires

2005 ◽  
Vol 33 (4) ◽  
pp. 210-226 ◽  
Author(s):  
I. L. Al-Qadi ◽  
M. A. Elseifi ◽  
P. J. Yoo ◽  
I. Janajreh
Keyword(s):  
Carrying Capacity ◽  
Material Properties ◽  
Three Dimensional ◽  
Fe Analysis ◽  
Load Carrying Capacity ◽  
Inflation Pressure ◽  
3D Finite Element ◽  
Load Carrying ◽  
Pavement Damage ◽  
New Generation

Abstract The objective of this study was to quantify pavement damage due to a conventional (385/65R22.5) and a new generation of wide-base (445/50R22.5) tires using three-dimensional (3D) finite element (FE) analysis. The investigated new generation of wide-base tires has wider treads and greater load-carrying capacity than the conventional wide-base tire. In addition, the contact patch is less sensitive to loading and is especially designed to operate at 690kPa inflation pressure at 121km/hr speed for full load of 151kN tandem axle. The developed FE models simulated the tread sizes and applicable contact pressure for each tread and utilized laboratory-measured pavement material properties. In addition, the models were calibrated and properly validated using field-measured stresses and strains. Comparison was established between the two wide-base tire types and the dual-tire assembly. Results indicated that the 445/50R22.5 wide-base tire would cause more fatigue damage, approximately the same rutting damage and less surface-initiated top-down cracking than the conventional dual-tire assembly. On the other hand, the conventional 385/65R22.5 wide-base tire, which was introduced more than two decades ago, caused the most damage.

Lung morphometry: a new generation of tools and experiments for organ, tissue, cell, and molecular biology

1993 ◽  
Vol 265 (6) ◽  
pp. L521-L548 ◽  
Author(s):  
R. P. Bolender ◽  
D. M. Hyde ◽  
R. T. Dehoff
Keyword(s):  
Structural Information ◽  
Dimensional Space ◽  
Three Dimensional ◽  
Biological Data ◽  
Theory And Practice ◽  
Tissue Cell ◽  
New Information ◽  
Organ Tissue ◽  
New Generation ◽  
Three Dimensional Space

Today all structural information of the lung can be quantified and interpreted in the three-dimensional space of real-world biology. Remarkable achievements in the theory and practice of biological stereology are creating a new generation of data suitable for constructing structural hierarchies. Such hierarchies serve to organize and link biological data, thereby providing a framework on which to build new information systems. In this review, we describe the new tools of quantitative morphology and show how they can be used to design new experiments for lung research.

scholarly journals Oxidization resistance and sorption properties of oleogels as new-generation fatty systems

2021 ◽  
pp. 89-95
Author(s):  
P.О. Nekrasov ◽  
◽  
N.A. Tkachenko ◽  
О.P. Nekrasov ◽  
О.M. Gudz ◽  
...  
Keyword(s):  
Sunflower Seed ◽  
Three Dimensional ◽  
Scientific Basis ◽  
Tocopherol Content ◽  
Sorption Properties ◽  
Dimensional Structure ◽  
Dispersed Phase ◽  
Technological Parameters ◽  
High Oleic Sunflower Oil ◽  
New Generation

Fats as complex mixtures of acylglycerols with lipid and non-lipid substances are an integral part of human nutrition. The presence of acylglycerols of trans-isomers of fatty acids causes many cardiovascular diseases and metabolic disorders. A promising approach to solving the problem of minimizing the content of these undesirable compounds in food recipes is to create a new generation of fat systems, oleogels, which are the subject of this study. High-oleic sunflower oil was used as a dispersion medium of oleogels, which allows obtaining systems with increased resistance to oxidation, as opposed to the oils of traditional kinds. Sunflower seed wax and tocopherols are chosen as a dispersed phase of these fatty systems. The choice of these components was based on their properties to create a three-dimensional structure in oleogels with specified thermomechanical characteristics. Currently, there is a lack of information on the influence of the content of the dispersed phase on the technological parameters of oleogels, namely oxidative resistance and sorption properties. The purpose of the presented work was to study these features of oleogels and establish their dependences on their composition. To solve this problem, the yield surface method is used in the work. The unknown values of the parameter vector were determined by using regression analysis algorithms. Deviation functionality was minimized by finding the appropriate combinations of the experimental series of predictors. A mathematical model was developed which allows predicting oxidative stability and sorption properties of oleogels based on the data on their composition. The suitable mass fractions of the components of the dispersed phase of oleogels have been determined as follows: tocopherol content is 0.10–0.14 wt.% and the sunflower seed wax content is 1.8–4.0 wt.%. The results obtained can serve as a scientific basis for the development of technology for the industrial production of oleogels as new generation fatty systems.

Online quality evaluation of tissue paper structure on new generation tissue machines

2018 ◽  
Vol 33 (1) ◽  
pp. 133-141 ◽  
Author(s):  
Jukka-Pekka Raunio ◽  
Tommi Löyttyniemi ◽  
Risto Ritala
Keyword(s):  
3D Structure ◽  
Three Dimensional ◽  
Surface Profile ◽  
Absorption Capacity ◽  
Tissue Paper ◽  
Paper Manufacturing ◽  
Residual Variation ◽  
Residual Variances ◽  
New Generation

Abstract At present, the tissue paper manufacturing is mostly based on the dry crepe technology. During the last decade, the manufacturers have introduced new tissue machines concepts that increase the softness, bulk, and absorption capacity. Such machines produce a strong regular three-dimensional (3D) structure to the sheet before the Yankee cylinder. At present, the quality of the 3D structure is not evaluated, or it is evaluated only subjectively at the mill. This is mostly because of the difficulties to separate reliably the regular 3D pattern from other variations. This paper introduces a frequency analysis based method which separates the surface profile variances in tissue paper to the creping, to the regular 3D pattern and to the residual variation. The 3D surface profiles and their variances were determined online with the photometric stereo method. We show that the introduced analysis method evaluates the variance portions reliably and the results are consistent with the visual perception of the 3D surfaces. In one particular product, the regular 3D pattern explains 74 % of total surface variance; the creping explains 10 % and residual variations 16 %. Furthermore, the creping and residual variances are quite stable over time whereas the variance of the regular 3D pattern fluctuates significantly.

scholarly journals A Study on the Relationship between the Design of Aerotrain and Its Stability Based on a Three-Dimensional Dynamic Model

Robotics ◽  
2020 ◽  
Vol 9 (4) ◽  
pp. 96
Author(s):  
Quang Huan Luong ◽  
Jeremy Jong ◽  
Yusuke Sugahara ◽  
Daisuke Matsuura ◽  
Yukio Takeda
Keyword(s):  
Dynamic Model ◽  
High Speed ◽  
Three Dimensional ◽  
Vehicle Body ◽  
Directional Stability ◽  
Rigid Body Model ◽  
Body Design ◽  
The Stability ◽  
New Generation ◽  
The Relationship

A new generation electric high-speed train called Aerotrain has levitation wings and levitates under Wing-in-Ground (WIG) effect along a U-shaped guideway. The previous study found that lacking knowledge of the design makes the prototype unable to regain stability when losing control. In this paper, the nonlinear three-dimensional dynamic model of the Aerotrain based on the rigid body model has been developed to investigate the relationship between the vehicle body design and its stability. Based on the dynamic model, this paper considered an Aerotrain with a horizontal tail and a vertical tail. To evaluate the stability, the location and area of these tails were parameterized. The effects of these parameters on the longitudinal and directional stability have been investigated to show that: the horizontal tail gives its best performance if the tail area is a function of the tail location; the larger vertical tail area and (or) the farther vertical tail location will give better directional stability. As for the lateral stability, a dihedral front levitation wing design was investigated. This design did not show its effectiveness, therefore a control system is needed. The obtained results are useful for the optimization studies on Aerotrain design as well as developing experimental prototypes.

scholarly journals A New Generation of Glycoconjugated Azo Dyes Based on Aminosugars

2015 ◽  
Vol 2015 ◽  
pp. 1-7
Author(s):  
Lorenzo Guazzelli ◽  
Giorgio Catelani ◽  
Felicia D’Andrea
Keyword(s):  
Acid Hydrolysis ◽  
Azo Dyes ◽  
Azo Dye ◽  
Protecting Groups ◽  
Third Generation ◽  
Sugar Moiety ◽  
The Third ◽  
New Generation ◽  
Monoazo Dyes ◽  
Hydrolysis Of

The third generation of glycoconjugated azo dyes (GADs) was prepared linking monoazo dyes to 6-amino-6-deoxy-d-galactose or 6′amino-6′-deoxylactose through mixed amido-ester connections. The complementary conjugation reactions were studied using the succinyl derivative of either the acetal protected aminosugar or the azo dye. Target “naturalized” GADs were obtained after acid hydrolysis of the acetal protecting groups present on the sugar moiety.

scholarly journals Next-Generation Low-Cost Motion Capture Systems Can Provide Comparable Spatial Accuracy to High-End Systems

2013 ◽  
Vol 29 (1) ◽  
pp. 112-117 ◽  
Author(s):  
Dominic Thewlis ◽  
Chris Bishop ◽  
Nathan Daniell ◽  
Gunther Paul
Keyword(s):  
Motion Capture ◽  
Low Cost ◽  
Three Dimensional ◽  
Gait Kinematics ◽  
Occupational Tasks ◽  
Soft Tissue Artifact ◽  
New Generation ◽  
The Impact ◽  
Linear Accuracy ◽  
Motion Capture Systems

The objective quantification of three-dimensional kinematics during different functional and occupational tasks is now more in demand than ever. The introduction of new generation of low-cost passive motion capture systems from a number of manufacturers has made this technology accessible for teaching, clinical practice and in small/medium industry. Despite the attractive nature of these systems, their accuracy remains unproved in independent tests. We assessed static linear accuracy, dynamic linear accuracy and compared gait kinematics from a Vicon MX-f20 system to a Natural Point OptiTrack system. In all experiments data were sampled simultaneously. We identified both systems perform excellently in linear accuracy tests with absolute errors not exceeding 1%. In gait data there was again strong agreement between the two systems in sagittal and coronal plane kinematics. Transverse plane kinematics differed by up to 3° at the knee and hip, which we attributed to the impact of soft tissue artifact accelerations on the data. We suggest that low-cost systems are comparably accurate to their high-end competitors and offer a platform with accuracy acceptable in research for laboratories with a limited budget.

Sign in / Sign up

Export Citation Format

Share Document