scholarly journals Study on Failure Plane of Bulk Solid in Squat Silos

2012 ◽  
Vol 6 (1) ◽  
pp. 33-37
Author(s):  
Changbing Chen
Keyword(s):  
Limit Equilibrium ◽  
Large Diameter ◽  
Small Diameter ◽  
Theoretical Method ◽  
Wall Pressure ◽  
Failure Plane ◽  
Limit Equilibrium Theory ◽  
Bulk Solid ◽  
Important Basis ◽  
Key Parameter

With the increasing volume demand of silos, squat silo diameters are bigger and bigger. However, present wall pressure computation methods are mostly based on small diameter silos. To solve this problem, systematical research on the wall pressure in squat silos is of great importance. For now, in the Chinese code the wall pressure computation methods are based on the limit equilibrium theory to be calculated, which define the orientation of the failure plane in the bulk solid within the silo. The rupture angle is a key parameter to silos’ wall pressure. Therefore the value and direction of rupture angle are researched by theoretical method in this paper, which has heavy significance and provide an important basis for the large diameter silo design.

Study on Rupture Angle of Bulk Solid in Large Diameter Silos

2010 ◽  
Vol 163-167 ◽  
pp. 1257-1261
Author(s):  
Chang Bing Chen
Keyword(s):  
Limit Equilibrium ◽  
Large Diameter ◽  
Small Diameter ◽  
Theoretical Method ◽  
Wall Pressure ◽  
Limit Equilibrium Theory ◽  
Bulk Solid ◽  
Rupture Plane ◽  
Important Basis ◽  
Key Parameter

With the increasing volume demand of silos, silo diameters are bigger and bigger. However, present wall pressure computation methods are mostly based on small diameter silos. To solve this problem, systematical research on the wall pressure in large diameter silos is of great importance. For now, in the Chinese code the wall pressure computation methods are based on the limit equilibrium theory to be calculated, which define the orientation of the rupture plane in the bulk solid within the silo. The rupture angle is a key parameter to silos’ wall pressure. Therefore the value and direction of rupture angle are researched by theoretical method in this paper, which has heavy significance and provide an important basis for the large diameter silo design.

Clogging mechanisms of filter barriers against debris-flow hazard

2021 ◽  
Author(s):  
Filippo Mauro ◽  
Alessandro Leonardi ◽  
Marina Pirulli
Keyword(s):  
Debris Flows ◽  
Large Diameter ◽  
Particle Diameter ◽  
Small Diameter ◽  
Equivalent Diameter ◽  
Threshold Values ◽  
Different Diameters ◽  
Debris Flow Hazard ◽  
Key Parameter

<p>Debris flows are amongst the most hazardous landslide phenomena (Jakob & Hungr, 2005). They are mixtures of flowing water and granular materials, which range in size from microscopic soil particles to massive rock boulders. Due to their unpredictability and rapidity, they pose severe hazard on infrastructure, structures, and human lives. To dissipate the destructive kinetic energy of debris flows and induce deposition of the coarsest fraction of the flow, mitigation systems often include the use of filter barriers. Filter barriers are built both in steel and reinforced concrete, and their openings should be designed according to a reference grain diameter. This key parameter is often chosen arbitrarily due to the difficulties in considering the full grain size distribution of the deposit. Sufficiently small outlets, however, leads to premature clogging of the barriers, blocking further outflow (Ashour et al., 2017). This can result in excessive maintenance costs.</p><p>This work focuses on the clogging mechanism of three different kinds of filter barriers: nets, slit dams, and slot dams. The aim is to evaluate the influence of grainsize dispersity into the clogging/non-clogging transition. Starting from simpler monodisperse granular material, we determine via DEM simulations the particle diameter D that induces clogging in the openings, as a function of the opening size S. Thus, for monodisperse grains, a set of threshold values for S/D can be detected: on one side of the threshold the particles are too small to clog the opening, on the other side they are too large to allow free passage of the material.</p><p>However, natural debris deposits are far from uniform. To analyse the role of grainsize dispersity, bidisperse specimens are created mixing grains with two different diameters: a small diameter and a large diameter. By varying the composition of large and small particles, a transition is observed between clogging and free-flow, in analogy with what obtained in the simulation with monodisperse grains. The comparison of results obtained with bidisperse and monodisperse samples indicates that an analogy in terms of trends and thresholds exists, as long as an equivalent diameter D* is introduced for bidisperse mixtures (Marchelli, 2018). This parameter is therefore suggested as the reference diameter to be adopted in the barrier design.</p>

Two Mechods to Get Lateral Pressure of Bulk Material on Squat Silo

2010 ◽  
Vol 29-32 ◽  
pp. 1390-1395
Author(s):  
Xing Shao ◽  
Wei Xiang Zhang
Keyword(s):  
Calculation Method ◽  
Lateral Pressure ◽  
Bulk Material ◽  
Limit Equilibrium ◽  
Diameter Ratio ◽  
Variation Method ◽  
Failure Plane ◽  
Limit Equilibrium Methods ◽  
Bulk Solid ◽  
Almost All

The two limit equilibrium methods of bulk material (Variation method and wedge model method) is employed to analyze models of sliding cuneiform volume of bulk solid, the lateral pressure formula for squat silos and equations of failure plane about sliding cuneiform volume are obtained. Variations of the positions of failure plane with height/diameter ratio are analized on the basis of the analysis for positions of failure plane by solution of these equation. The applied range and calculation method of the formula, and pressure distribution are discussed. The effects of friction between bulk solid and squat silos on the positions of failure plane and lateral pressure of bulk solid are discussed. The conclusion is that caculation results is available for squat silo design when the friction takes no into account, and the applied range of the formula is that height/diameter ratio equals 1.3. It is widely appicable for almost all squat silos. The caculation results agree with that of the full-sized silo experiment. This is a reasonable calculation method for design of squat silo.

Differences in the brain stem terminations of large- and small-diameter vestibular primary afferents

1995 ◽  
Vol 74 (3) ◽  
pp. 1362-1366 ◽  
Author(s):  
J. A. Huwe ◽  
E. H. Peterson
Keyword(s):  
Brain Stem ◽  
Large Diameter ◽  
Small Diameter ◽  
Movement Control ◽  
Three Dimensions ◽  
Significant Shift ◽  
Axon Diameter ◽  
Vestibular Complex ◽  
The Brain ◽  
Adjacent Brain

1. We visualized the central axons of 32 vestibular afferents from the posterior canal by extracellular application of horseradish peroxidase, reconstructed them in three dimensions, and quantified their morphology. Here we compare the descending limbs of central axons that differ in parent axon diameter. 2. The brain stem distribution of descending limb terminals (collaterals and associated varicosities) varies systematically with parent axon diameter. Large-diameter afferents concentrate their terminals in rostral regions of the medial/descending nuclei. As axon diameter decreases, there is a significant shift of terminal concentration toward the caudal vestibular complex and adjacent brain stem. 3. Rostral and caudal regions of the medial/descending nuclei have different labyrinthine, cerebellar, intrinsic, commissural, and spinal connections; they are believed to play different roles in head movement control. Our data help clarify the functions of large- and small-diameter afferents by showing that they contribute differentially to rostral and caudal vestibular complex.

Limit equilibrium theory-based investigation on the critical tension crack depth in loess slope

2021 ◽  
Vol 80 (9) ◽  
Author(s):  
Linxuan Zhu ◽  
Zhijun Zhou ◽  
Lei Chen ◽  
Tianyu Xu ◽  
Zhipeng Zhang ◽  
...  
Keyword(s):  
Limit Equilibrium ◽  
Crack Depth ◽  
Equilibrium Theory ◽  
Tension Crack ◽  
Limit Equilibrium Theory ◽  
Loess Slope ◽  
Critical Tension

scholarly journals Elastic Modulus and Elasticity Ratio of Malignant Breast Lesions with Shear Wave Ultrasound Elastography: Variations with Different Region of Interest and Lesion Size

Diagnostics ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 1015
Author(s):  
Antonio Bulum ◽  
Gordana Ivanac ◽  
Eugen Divjak ◽  
Iva Biondić Špoljar ◽  
Martina Džoić Dominković ◽  
...  
Keyword(s):  
Elastic Modulus ◽  
Shear Wave ◽  
Large Diameter ◽  
Small Diameter ◽  
Shear Wave Elastography ◽  
Lesion Size ◽  
Ultrasound Elastography ◽  
Breast Lesions ◽  
Malignant Breast ◽  
The Impact

Shear wave elastography (SWE) is a type of ultrasound elastography with which the elastic properties of breast tissues can be quantitatively assessed. The purpose of this study was to determine the impact of different regions of interest (ROI) and lesion size on the performance of SWE in differentiating malignant breast lesions. The study included 150 female patients with histopathologically confirmed malignant breast lesions. Minimal (Emin), mean (Emean), maximal (Emax) elastic modulus and elasticity ratio (e-ratio) values were measured using a circular ROI size of 2, 4 and 6 mm diameters and the lesions were divided into large (diameter ≥ 15 mm) and small (diameter < 15 mm). Highest Emin, Emean and e-ratio values and lowest variability were observed when using the 2 mm ROI. Emax values did not differ between different ROI sizes. Larger lesions had significantly higher Emean and Emax values, but there was no difference in e-ratio values between lesions of different sizes. In conclusion, when measuring the Emin, Emean and e-ratio of malignant breast lesions using SWE the smallest possible ROI size should be used regardless of lesion size. ROI size has no impact on Emax values while lesion size has no impact on e-ratio values.

Analysis Influence of Pile Embedded Depth and Diameter on Pile Tip Resistance

2013 ◽  
Vol 353-356 ◽  
pp. 459-462
Author(s):  
Ying Jie Zheng ◽  
Bin Fang ◽  
Lian Xiang Li
Keyword(s):  
Large Diameter ◽  
Small Diameter ◽  
Stiffness Ratio ◽  
Initial Stiffness ◽  
Tip Resistance

Pile tip absolute settlement curves and relative settlement curves of several working cases were analyzed. It is found that load-settlement curve characteristic related to the selection standard. The tip resistance initial stiffness of each case was analyzed. Results show that the small diameter pile has higher initial stiffness than large diameter pile, embedded depth has little influence on initial stiffness ratio, but increment of initial stiffness is linear with embedded depth growth.

New method of poultry selection

2021 ◽  
pp. 61-66
Author(s):  
E. Rehleckaya ◽  
A. Dymkov ◽  
L. Lazarets ◽  
A. Maltsev
Keyword(s):  
Egg Production ◽  
Initial Period ◽  
Large Diameter ◽  
Small Diameter ◽  
Live Weight ◽  
Individual Variability ◽  
Egg Laying ◽  
New Method ◽  
Egg Diameter ◽  
Correlation Rate

Purpose: Install the influence of the «small diameter of the egg» on the living mass and the reproductive qualities of chickens of meat crosses and the quail of meat breeds.Materials and methods. The selection was carried out along egg production and mass of eggs and additionally on the average small diameter of 5 eggs by value of ≥0.5σ from the average for the herd, while the evaluation on the basis of the «small diameter of the egg» was carried out in chickens aged 238 days of life, quails — 70 days of life. Calculated the average for each female and the average for the herd. For further reproduction, chickens carrying eggs with a small egg diameter ≥0.5σ from the average for the herd. Studies were held in SibNIP on quail and on the courses.Results. In the initial period of the egg laying, the individual variability of the small diameter of the egg — more than 10% (in the future, the figure decreased). The close correlation rate of the small egg diameter in the first half of the egg laying with such at the end of the bird's operation period was revealed. It has been established that the large diameter of the egg has a positive reliable connection with a lively mass, but negative with egg production. The reliable correlation rate of the small diameter of the egg with a live weight at a 42-day age, as well as with the derivation of eggs. The inheritance coefficients of the small diameter of the egg are comparable to the inheritance coefficients of the mass of eggs and significantly exceed those for a large diameter of the egg. The selection according to the small diameter of the eggs by ≥0.5σ from the average for the herd led to the fact that the chickens of the experimental groups reliably exceeded the live weight in the SB level of 1.57%, in the line G8 — by 1.35%. The superiority of a lively mass of quail of experienced groups was more pronounced than that of the chickens: the Pharaoh breed — by 4.15%, the Texas white breed is 4.22%. In relation to the derivation of eggs, a similar trend was traced. The derivation of eggs in quails of experienced groups was more than 4.59–4.98%; Country, respectively, 4.57–5.22%. Egg production of females of comparable groups of both chickens and quail was almost on the same level, and the difference was unreliable.Conclusion. It was established that a new method of breeding the poultry of the meat direction of productivity allows without decreasing egg production to increase the living mass of chickens of meat crosses by 1.5%, rewinds of meat breeds — by 4%, the derivation of eggs, respectively, by 4–5%. The method is intended for early prediction of females productivity during breeding selection.

Copolymer-Nanoparticles Mixture in a Cylindrical Pore

NANO ◽  
2017 ◽  
Vol 12 (04) ◽  
pp. 1750045
Author(s):  
Jun-Xing Pan ◽  
Yu-Qi Guo ◽  
Yu-Fang Han ◽  
Min-Na Sun ◽  
Jin-Jun Zhang
Keyword(s):  
Phase Transition ◽  
Electrical Conductivity ◽  
Polymer Nanocomposites ◽  
Diblock Copolymer ◽  
Large Diameter ◽  
Small Diameter ◽  
Confinement Effect ◽  
Cylindrical Pore ◽  
Disorder Phase Transition ◽  
Novel Structures

Computer simulation is carried out for investigating the effect of nanoparticles on diblock copolymer morphology under cylindrical confinement. The phase diagrams of polymer nanocomposites with nanoparticle-block wetting strength and concentration of nanoparticles are obtained in different nanopores. In small diameter nanopore, there is almost no influence of nanoparticles on the diblock copolymer morphology because of the stronger confinement effect; in middle diameter nanopore, the system can self-assemble into various novel structures due to the interaction between confinement effect and nanoparticles effect; in large diameter nanopore, due to the stronger effect of nanoparticles, a disorder-order-disorder phase transition occurs with the wetting strength and concentration of nanoparticles increasing. This result can be useful in designing new nanocomposites with advanced electrical conductivity and/or mechanical strength.

scholarly journals A model of tight junction function in central nervous system myelinated axons

2008 ◽  
Vol 4 (4) ◽  
pp. 307-317 ◽  
Author(s):  
Alexander Gow ◽  
Jerome Devaux
Keyword(s):  
Current Flow ◽  
Large Diameter ◽  
Small Diameter ◽  
Structural Features ◽  
Axonal Membrane ◽  
Flow Through ◽  
Saltatory Conduction ◽  
Gait Abnormalities ◽  
Low Capacitance ◽  
Speed And Accuracy

The insulative properties of myelin sheaths in the central and peripheral nervous systems (CNS and PNS) are widely thought to derive from the high resistance and low capacitance of the constituent membranes. Although this view adequately accounts for myelin function in large diameter fibers, it poorly reflects the behavior of small fibers that are prominent in many regions of the CNS. Herein, we develop a computational model to more accurately represent conduction in small fibers. By incorporating structural features that, hitherto, have not been simulated, we demonstrate that myelin tight junctions (TJs) improve saltatory conduction by reducing current flow through the myelin, limiting axonal membrane depolarization and restraining the activation of ion channels beneath the myelin sheath. Accordingly, our simulations provide a novel view of myelin by which TJs minimize charging of the membrane capacitance and lower the membrane time constant to improve the speed and accuracy of transmission in small diameter fibers. This study establishes possible mechanisms whereby TJs affect conduction in the absence of overt perturbations to myelin architecture and may in part explain the tremor and gait abnormalities observed in Claudin 11-null mice.

Sign in / Sign up

Export Citation Format

Share Document