scholarly journals Evaluating the Effects of Monovalent and Divalent Salts on the Rheological Properties of Water Based Mud

2018 ◽  
Vol 11 (1) ◽  
pp. 98-106 ◽  
Author(s):  
Ohenewaa K. Dankwa ◽  
Prince Opoku Appau ◽  
Eric Broni-Bediako
Keyword(s):  
Rheological Properties ◽  
Apparent Viscosity ◽  
Magnesium Chloride ◽  
Drilling Fluid ◽  
Significant Decline ◽  
Drilling Mud ◽  
Foreign Material ◽  
Water Based ◽  
Drilling Operations ◽  
Divalent Salts

Introduction:Drilling fluid selection plays a key role in preventing major problems encountered during drilling operations such as hole pack-off, stuck pipe and loss circulation. Mud contamination which results from the overtreatment of the mud system with additives or foreign material entering the mud system during drilling operations causes unwanted changes in the properties of the mud. This makes the mud system inefficient in performing its major roles. This research studies the effects of monovalent and divalent salts namely Potassium Chloride, Calcium Chloride, and Magnesium Chloride on the rheological properties of water-based mud system which is most vulnerable to contamination.Methods:Sixteen mud samples were formulated of which fifteen were contaminated each with different concentrations (0.75 g, 1.50 g, 2.50 g, 3.50 g, and 5.0 g) of the various salts at ambient temperature.Results:The results showed that the rheological properties such as plastic viscosity, apparent viscosity and yield point of the mud samples decreased as the concentrations of various salts increase.Conclusion:It was concluded that increase in the concentration of the salts resulted in a decrease in the rheological properties of the mud samples. This indicates that with the monovalent and divalent salt contamination, there is a significant decline in the performance of drilling mud since the salts affect the dispersion, hydration and flocculation behaviour of the particles. The effect was more profound with CaCl2 and MgCl2 salts than the KCl salt.

scholarly journals Comparison between the Effect of Local Katira Gum and Xanthan Gum on the Rheological Properties of Water-based Drilling Fluids

2020 ◽  
Vol 4 (2) ◽  
pp. 18
Author(s):  
Bayan Qadir Sofy Hussein ◽  
Khalid Mahmood Ismael Sharbazheri ◽  
Nabil Adiel Tayeb Ubaid
Keyword(s):  
Rheological Property ◽  
Rheological Properties ◽  
Yield Point ◽  
Experimental Work ◽  
Apparent Viscosity ◽  
Xanthan Gum ◽  
Drilling Fluid ◽  
Drilling Fluids ◽  
Drilling Mud ◽  
Water Based

The rheological properties of drilling fluids have an important role in providing a stable wellbore and eliminating the borehole problems. Several materials including polymers (xanthan gum) can be used to improve these properties. In this study, the effect of the local Katira, as a new polymer, on the rheological properties of the drilling fluids prepared as the bentonite-water-based mud has been investigated in comparison with the conventional xanthan gum. Experimental work was done to study of rheological properties of several gums such as, local katira gum, and xanthan gum bentonite drilling mud. Different samples of drilling fluids are prepared adding the xanthan gum and local katira to the base drilling fluid at different concentrations using Hamilton Beach mixer. The prepared samples are passed through rheological property tests including the apparent viscosity, plastic viscosity, and yield point (YP) under different temperature conditions. The obtained results show that the viscosity is increased from 5 to 8.5 cp and YP is increased from 18.5 to 30.5 lb/100 ft2, with increasing the concentration of the xanthan gum from 0.1 to 0.4. However, the effect of the local katira in increasing the viscosity and YP is lower compared with the xanthan gum, which are ranged between 5–6 cp and 18.5–20.5 cp.

scholarly journals Comparative Analysis of the Effect of Barite and Hematite on the Rheology of Water-Based Drilling Mud

2021 ◽  
Vol 1 (2) ◽  
Author(s):  
Osei H
Keyword(s):  
Rheological Properties ◽  
Drilling Fluid ◽  
Attrition Rate ◽  
Drilling Mud ◽  
Cleaning Efficiency ◽  
Drilling Operation ◽  
Water Based ◽  
Petroleum Resources ◽  
Drilling Muds ◽  
The Impact

High demand for oil and gas has led to exploration of more petroleum resources even at remote areas. The petroleum resources are found in deeper subsurface formations and drilling into such formations requires a well-designed drilling mud with suitable rheological properties in order to avoid or reduce associated drilling problems. This is because rheological properties of drilling muds have considerable effect on the drilling operation and cleaning of the wellbore. Mud engineers therefore use mud additives to influence the properties and functions of the drilling fluid to obtain the desired drilling mud properties especially rheological properties. This study investigated and compared the impact of barite and hematite as weighting agents for water-based drilling muds and their influence on the rheology. Water-based muds of different concentrations of weighting agents (5%, 10%, 15% and 20% of the total weight of the drilling mud) were prepared and their rheological properties determined at an ambient temperature of 24ᵒC to check their impact on drilling operation. The results found hematite to produce higher mud density, plastic viscosity, gel strength and yield point when compared to barite at the same weighting concentrations. The higher performance of the hematite-based muds might be attributed to it having higher specific gravity, better particle distribution and lower particle attrition rate and more importantly being free from contaminants. The water-based muds with hematite will therefore be more promising drilling muds with higher drilling and hole cleaning efficiency than those having barite.

Development of New Models to Determine the Rheological Parameters of Water-based Drilling Fluid Using Artificial Intelligence

2021 ◽  
Author(s):  
Farqad Hadi ◽  
Ali Noori ◽  
Hussein Hussein ◽  
Ameer Khudhair
Keyword(s):  
Rheological Properties ◽  
High Performance ◽  
Drilling Fluid ◽  
Gel Strength ◽  
Solid Content ◽  
Rheological Parameters ◽  
Water Based ◽  
Fluid Properties ◽  
Drilling Operations ◽  
Marsh Funnel

Abstract It is well known that drilling fluid is a key parameter for optimizing drilling operations, cleaning the hole, and managing the rig hydraulics and margins of surge and swab pressures. Although the experimental works present valid and reliable results, they are expensive and time consuming. On the other hand, continuous and regular determination of the rheological mud properties can perform its essential functions during well construction. More uncertainties in planning the drilling fluid properties meant that more challenges may be exposed during drilling operations. This study presents two predictive techniques, multiple regression analysis (MRA) and artificial neural networks (ANNs), to determine the rheological properties of water-based drilling fluid based on other simple measurable properties. While mud density (MW), marsh funnel (MF), and solid% are key input parameters in this study, the output functions or models are plastic viscosity (PV), yield point (YP), apparent viscosity (AV), and gel strength. The prediction methods were demonstrated by means of a field case in eastern Iraq, using datasets from daily drilling reports of two wells in addition to the laboratory measurements. To test the performance ability of the developed models, two error-based metrics (determination coefficient R2 and root mean square error RMSE) have been used in this study. The current results of this study support the evidence that MW, MF, and solid% are consistent indexes for the prediction of rheological properties. Both mud density and solid content have a relative-significant effect on increasing PV, YP, AV, and gel strength. However, a scattering around each fit curve is observed which proved that one rheological property alone is not sufficient to estimate other properties. The results also reveal that both MRA and ANN are conservative in estimating the fluid rheological properties, but ANN is more precise than MRA. Eight empirical mathematical models with high performance capacity have been developed in this study to determine the rheological fluid properties based on simple and quick equipment as mud balance and marsh funnel. This study presents cost-effective models to determine the rheological fluid properties for future well planning in Iraqi oil fields.

scholarly journals Influence of Graphene Nanoplatelet and Silver Nanoparticle on the Rheological Properties of WaterBased Mud †

2018 ◽  
Vol 8 (8) ◽  
pp. 1386 ◽  
Author(s):  
Hazlina Husin ◽  
Khaled Abdalla Elraies ◽  
Hyoung Jin Choi ◽  
Zachary Aman
Keyword(s):  
Rheological Properties ◽  
Silver Nanoparticle ◽  
Drilling Fluid ◽  
Oil Field ◽  
Fluid Loss ◽  
Drilling Mud ◽  
Fluid System ◽  
Graphene Nanoplatelet ◽  
Environmental Friendly ◽  
Water Based

Water-based mud is known as an environmental-friendly drilling fluid system. The formulation of water-based mud is designed to have specific rheological properties under specific oil field conditions. In this study, graphene nanoplatelet and silver nanoparticle (nanosilver) were added to a water-based mud formulation in which they act as drilling mud additives. Rheological properties measurements and filtration tests were conducted for evaluating the influence of the added nanoparticles. The results showed that the graphene nanoplatelet and the nanosilver increased the plastic viscosity (PV) by up to 89.2% and 64.2%, respectively. Meanwhile, both the yield point (YP) and the fluid loss values were reduced. In addition, we believe this is the first result ever report where nanosilver is utilized for enhancing-enhanced water-based mud’s performance.

Modified Corn Starch as an Environmentally Friendly Rheology Enhancer and Fluid Loss Reducer for Water-Based Drilling Mud

SPE Journal ◽  
2022 ◽  
pp. 1-17
Author(s):  
Emanuel Ricky ◽  
Musa Mpelwa ◽  
Chao Wang ◽  
Bahati Hamad ◽  
Xingguang Xu
Keyword(s):  
Rheological Properties ◽  
High Temperatures ◽  
Corn Starch ◽  
Drilling Fluid ◽  
Environmentally Friendly ◽  
Fluid Loss ◽  
Drilling Mud ◽  
Oh Groups ◽  
Filtration Loss ◽  
Water Based

Summary Drilling fluid rheology and fluid loss property are fundamental parameters that dictate the effectiveness and easiness of a drilling operation. Maintaining these parameters under high temperatures is technically challenging and has been an exciting research area for the drilling industry. Nonetheless, the use of drilling mud additives, particularly synthetic polymers, threaten ecological environments. Herein, modified corn starch (MCS) was synthesized, characterized, and investigated as an environmentally friendly rheology enhancer and filtration loss controlling agent for water-based mud (WBM) at high temperatures. The experimental results indicated that MCS exhibits better performance in improving rheological properties and fluid loss controlling ability for WBM than the commonly used mud additives. With the addition of an optimal concentration (0.3 wt%), MCS improved the rheology and fluid loss behavior of WBM formulation at harsh aging temperature (220°C) by practically 4 times and 1.7 times, respectively. The MCS was revealed to perform superbly over polyanionic cellulose (PAC) addition at all investigated temperatures. The better performance of the MCS was ascribed to the improved entanglements in the mud system owing to the additional hydroxyl (OH) groups. Besides, the Herschel-Bulkley model was found to be a constitutive model that described the rheological properties of the investigated muds satisfactorily. Moreover, the MCS was found to exhibit acceptable biodegradability properties.

Rheological Properties of Water-Based Drilling Fluids in Deep Offshore Conditions

2019 ◽  
Author(s):  
Qian Ding ◽  
Baojiang Sun ◽  
Zhiyuan Wang ◽  
Yonghai Gao ◽  
Yu Gao ◽  
...  
Keyword(s):  
High Pressure ◽  
High Temperature ◽  
Low Temperature ◽  
Rheological Properties ◽  
Apparent Viscosity ◽  
Drilling Fluid ◽  
Plastic Viscosity ◽  
Drilling Fluids ◽  
Water Based ◽  
Temperature And Pressure

Abstract In deep-water drilling, the drilling fluid is affected by the alternating temperature field derived from the low temperature of the seawater and the high temperature of the formation. The complicated wellbore temperature and pressure environments make the prediction of rheological properties of the drilling fluid difficult. In this study, the rheological properties of water-based drilling fluid in full temperature and pressure range of deep-water conditions were tested from 2 to 150 °C (35.6 to 302 °F) and 0.1 to 70 MPa (14.5 to 10000psi). The experiment was carried out by the OFI130-77 high temperature and high pressure rheometer. The experimental data were processed by multiple regression analysis method, and the mathematical model for predicting the apparent viscosity, plastic viscosity and yield point of water-based drilling fluid under high temperature and high pressure conditions was established. The experimental results show that when the temperature is lower than 65 °C (149 °F), the apparent viscosity and plastic viscosity of the water-based drilling fluid decrease significantly with increasing temperature. When the temperature is higher than 65 °C (149 °F), the apparent viscosity and plastic viscosity decrease slowly. Under low temperature conditions, the effect of pressure on the apparent viscosity and plastic viscosity of water-based drilling fluids is relatively significant. The calculated values of the prediction model have a good agreement with the experimental measurements. Compared with the traditional model, this prediction model has a significant improvement in the prediction accuracy in the low temperature section, which can provide a calculation basis for on-site application of deepwater drilling fluid.

scholarly journals The effect of drill–pipe rotation on improving hole cleaning using polypropylene beads in water-based mud at different hole angles

2019 ◽  
Vol 10 (3) ◽  
pp. 1253-1262 ◽  
Author(s):  
A. Katende ◽  
B. Segar ◽  
I. Ismail ◽  
F. Sagala ◽  
H. H. A. R. Saadiah ◽  
...  
Keyword(s):  
Buoyancy Force ◽  
Drilling Fluid ◽  
Drill Pipe ◽  
Drilling Mud ◽  
Hole Cleaning ◽  
Drag Forces ◽  
Water Based ◽  
Drilling Operations ◽  
Cost Efficient ◽  
Pipe Rotation

AbstractHole cleaning is always a problem, particularly during drilling operations, and drilling fluid plays an important role in transporting drill cuttings through an annular section of wellbore to the surface. To transport the cuttings, a water-based mud with added polypropylene beads was selected since it is environmentally friendly and cost efficient. The polypropylene beads help to transport cuttings by providing an additional buoyancy force that lifts the cuttings to the surface via the influence of collision and drag forces. This experiment was performed using a 20 ft test section, 10 ppg drilling mud and 0.86 m/s annular velocity in a laboratory scale rig simulator, and the concentration of polypropylene beads was varied from 0 to 8 ppb. As the concentration of polypropylene increases, the cutting transport ratio also increases. It was observed that the fewest cuttings are lifted at a critical angle of 60°, followed by 45°, 30°, 90° and 0°. Additionally, cutting sizes had moderate effects on the cutting lifting efficiency, where smaller cutting sizes (0.5–1.0 mm) are easier to lift than larger cutting sizes (2.0–2.8 mm). Furthermore, a study of buoyancy force and impulsive force was conducted to investigate the cutting lifting efficiencies of various concentrations of polypropylene beads. This lifting capacity was also assisted by the presence of polyanionic cellulose (PAC), which increases the mud carrying capacity and is effective for smaller cuttings. The results show that in the presence of pipe rotation, the cutting lifting efficiency is slightly enhanced due to the orbital motion provided by the drill pipe for better hole cleaning. In conclusion, polypropylene beads combined with pipe rotation increase the cutting transport ratio in the wellbore.

scholarly journals Assessing the Relation between Mud Components and Rheology for Loss Circulation Prevention Using Polymeric Gels: A Machine Learning Approach

Energies ◽  
2021 ◽  
Vol 14 (5) ◽  
pp. 1377
Author(s):  
Musaab I. Magzoub ◽  
Raj Kiran ◽  
Saeed Salehi ◽  
Ibnelwaleed A. Hussein ◽  
Mustafa S. Nasser
Keyword(s):  
Machine Learning ◽  
Rheological Properties ◽  
Nearest Neighbor ◽  
Drilling Fluid ◽  
Gradient Boosting ◽  
K Nearest Neighbor ◽  
Wide Range ◽  
Machine Learning Approach ◽  
Drilling Operations

The traditional way to mitigate loss circulation in drilling operations is to use preventative and curative materials. However, it is difficult to quantify the amount of materials from every possible combination to produce customized rheological properties. In this study, machine learning (ML) is used to develop a framework to identify material composition for loss circulation applications based on the desired rheological characteristics. The relation between the rheological properties and the mud components for polyacrylamide/polyethyleneimine (PAM/PEI)-based mud is assessed experimentally. Four different ML algorithms were implemented to model the rheological data for various mud components at different concentrations and testing conditions. These four algorithms include (a) k-Nearest Neighbor, (b) Random Forest, (c) Gradient Boosting, and (d) AdaBoosting. The Gradient Boosting model showed the highest accuracy (91 and 74% for plastic and apparent viscosity, respectively), which can be further used for hydraulic calculations. Overall, the experimental study presented in this paper, together with the proposed ML-based framework, adds valuable information to the design of PAM/PEI-based mud. The ML models allowed a wide range of rheology assessments for various drilling fluid formulations with a mean accuracy of up to 91%. The case study has shown that with the appropriate combination of materials, reasonable rheological properties could be achieved to prevent loss circulation by managing the equivalent circulating density (ECD).

Annular Frictional Pressure Losses During Drilling—Predicting the Effect of Drillstring Rotation

2014 ◽  
Vol 136 (3) ◽  
Author(s):  
Arild Saasen
Keyword(s):  
Rheological Properties ◽  
Pressure Loss ◽  
Drilling Fluid ◽  
Axial Flow ◽  
Drilling Fluids ◽  
Unstable Flow ◽  
Pressure Losses ◽  
Shear Dependent Viscosity ◽  
Water Based ◽  
Dependent Viscosity

Controlling the annular frictional pressure losses is important in order to drill safely with overpressure without fracturing the formation. To predict these pressure losses, however, is not straightforward. First of all, the pressure losses depend on the annulus eccentricity. Moving the drillstring to the wall generates a wider flow channel in part of the annulus which reduces the frictional pressure losses significantly. The drillstring motion itself also affects the pressure loss significantly. The drillstring rotation, even for fairly small rotation rates, creates unstable flow and sometimes turbulence in the annulus even without axial flow. Transversal motion of the drillstring creates vortices that destabilize the flow. Consequently, the annular frictional pressure loss is increased even though the drilling fluid becomes thinner because of added shear rate. Naturally, the rheological properties of the drilling fluid play an important role. These rheological properties include more properties than the viscosity as measured by API procedures. It is impossible to use the same frictional pressure loss model for water based and oil based drilling fluids even if their viscosity profile is equal because of the different ways these fluids build viscosity. Water based drilling fluids are normally constructed as a polymer solution while the oil based are combinations of emulsions and dispersions. Furthermore, within both water based and oil based drilling fluids there are functional differences. These differences may be sufficiently large to require different models for two water based drilling fluids built with different types of polymers. In addition to these phenomena washouts and tool joints will create localised pressure losses. These localised pressure losses will again be coupled with the rheological properties of the drilling fluids. In this paper, all the above mentioned phenomena and their consequences for annular pressure losses will be discussed in detail. North Sea field data is used as an example. It is not straightforward to build general annular pressure loss models. This argument is based on flow stability analysis and the consequences of using drilling fluids with different rheological properties. These different rheological properties include shear dependent viscosity, elongational viscosity and other viscoelastic properties.

Sign in / Sign up

Export Citation Format

Share Document