scholarly journals Assessing the Thermal Performance of Negeri Sembilan Traditional Malay House towards Sustainable Practice

2019 ◽  
Vol 4 (12) ◽  
pp. 289
Author(s):  
Nik Siti Fatimah Nik Hassin ◽  
Alamah Misni

Traditional Malay house has characteristics of the passive thermal design that naturally practices climatic design strategies. Currently, Urban Heat Island (UHI), causing an increase in energy consumption for cooling purposes, especially in the residential sectors. Consequently, modern building construction has a poor passive thermal design. This study aims to assess the thermal performance of Negeri Sembilan traditional Malay house towards sustainable practice in the tropical environment. The main finding shows that house openings allow natural cross-ventilation, while less strategic house orientation towards climate factors and lightweight materials used contributes to the uncomfortable of the interior spaces reaches as much as 35ºC during the peak time of the day. This study highlights ideas and knowledge in improving the construction technology for modern architecture to produce an effective indoor thermal performance in a tropical environment.       Keywords: Malay House; Traditional Architecture; Thermal Performance; Tropical; EnvironmenteISSN: 2398-4287 © 2019. The Authors. Published for AMER ABRA cE-Bs by e-International Publishing House, Ltd., UK. This is an open-access article under the CC BYNC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/). Peer–review under responsibility of AMER (Association of Malaysian Environment-Behaviour Researchers), ABRA (Association of Behavioural Researchers on Asians) and cE-Bs (Centre for Environment-Behaviour Studies), Faculty of Architecture, Planning & Surveying, Universiti Teknologi MARA, Malaysia.DOI: https://doi.org/10.21834/e-bpj.v4i12.1914

2021 ◽  
Author(s):  
◽  
Alamah Misni

<p><b>Increasing energy consumption is having a detrimental effect on the environment. This issue combined with rising energy costs, is motivating people to reduce energy consumption. Moderating a building’s surrounding microclimate naturally through strategic landscaping has the potential to benefit the environment, save energy, save money and provide comfortable living environments.</b></p> <p>The urban heat island effect is a well documented phenomenon, which influences the climate of most of the major cities around the world. It occurs when the air temperature in densely built urban areas is higher by 2°C to 8°C compared to the temperature of the surrounding rural environment. This issue is of particular concern in tropical areas, which experience high temperatures and humidity all year round. In these areas, solar heat passes through a building’s envelope via glazed windows and the walls and roofs resulting in uncomfortable interior spaces. The increased purchasing power of the population has resulted in greater use of air-conditioners to create and maintain a comfortable indoor temperature. This study found that the average household uses up to 37% of their electricity consumption for cooling. Careful planning of exterior spaces can help reduce energy consumption for cooling by reducing the adverse impact of some climatic factors. Strategically placed vegetation around a building has long been recognised as a means of cooling. It can reduce temperatures and humidity through shading, evapotranspiration and wind channelling.</p> <p>The aim of this study was to examine and quantify the relationship between surrounding vegetation, and the thermal performance of housing in a hot-humid tropical environment. The primary objective was to determine the energy saving potential of vegetation for the tropical residence. The secondary objective was to investigate the effect of vegetation on modifying the outdoor temperature around a single-family house in a hot-humid climate.</p> <p>Monitoring of household electricity use in the two Malaysian cities, Shah Alam and Putrajaya, has shown that at night time, when families are at home, is when airconditioning is used the most. Building surfaces on the east and west side are most affected by the sun, gaining and storing heat throughout the day until night time, when it is released into the house as the outdoor temperatures cool. Planting the right species, size and shape of trees, shrubs, vines, groundcover, and turf in strategic positions around a garden can greatly reduce the temperature around buildings. This in turn reduces the energy used for air conditioning. This study found that strategic landscaping, which resulted in shading and encouraged evapotranspiration and wind channelling, could reduce electricity use and costs by as much as 20%. The physical characteristics of buildings including their construction, size and age, combined with their landscape designs were looked at in 50 private houses in Malaysia. Measurements were taken from several outdoor and indoor locations around the houses. The findings showed that strategic design of landscaping could reduce heat build-up in a house, by shading, evapotranspiration and wind channelling by as much as 4°C for the exterior and 3°C for the interior spaces.</p> <p>These results demonstrate how strategic landscaping can assist in creating a favourable microclimate in a house, which will help reduce energy consumption. Its effect can extend beyond the residential to have a positive influence on an area’s macroclimate and at a regional scale.</p>


2017 ◽  
Vol 2 (5) ◽  
pp. 23 ◽  
Author(s):  
Noor Izzan Nordin ◽  
Alamah Misni

The study focus to compare the indoor thermal performance level between a new mosque and old mosques. Specific objectives are to identify the criteria that support sustainable practice, to analyse the indoor thermal performance using thermal monitoring tests and to propose strategic approaches for mosque design to achieve good indoor thermal performance towards sustainable practice. The data was carried out by experimental and observation. This data have been analyzed by Origin 6.0. Results show that the significant different between old and new mosque in indoor thermal performance. The main finding is influenced by the practice of passive design includes the building orientation and location, opening and building envelopes. Buildings should be correctly oriented to minimize solar gain and maximize natural ventilation.Keywords: Mosque; passive design; sustainable practice; thermal performance.© 2017. The Authors. Published for AMER ABRA by e-International Publishing House, Ltd., UK. This is an open access article under the CC BYNC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/). Peer–review under responsibility of AMER (Association of Malaysian Environment-Behaviour Researchers), ABRA (Association of Behavioural Researchers on Asians) and cE-Bs (Centre for Environment-Behaviour Studies), Faculty of Architecture, Planning & Surveying, Universiti Teknologi MARA, Malaysia.


2021 ◽  
Author(s):  
◽  
Alamah Misni

<p><b>Increasing energy consumption is having a detrimental effect on the environment. This issue combined with rising energy costs, is motivating people to reduce energy consumption. Moderating a building’s surrounding microclimate naturally through strategic landscaping has the potential to benefit the environment, save energy, save money and provide comfortable living environments.</b></p> <p>The urban heat island effect is a well documented phenomenon, which influences the climate of most of the major cities around the world. It occurs when the air temperature in densely built urban areas is higher by 2°C to 8°C compared to the temperature of the surrounding rural environment. This issue is of particular concern in tropical areas, which experience high temperatures and humidity all year round. In these areas, solar heat passes through a building’s envelope via glazed windows and the walls and roofs resulting in uncomfortable interior spaces. The increased purchasing power of the population has resulted in greater use of air-conditioners to create and maintain a comfortable indoor temperature. This study found that the average household uses up to 37% of their electricity consumption for cooling. Careful planning of exterior spaces can help reduce energy consumption for cooling by reducing the adverse impact of some climatic factors. Strategically placed vegetation around a building has long been recognised as a means of cooling. It can reduce temperatures and humidity through shading, evapotranspiration and wind channelling.</p> <p>The aim of this study was to examine and quantify the relationship between surrounding vegetation, and the thermal performance of housing in a hot-humid tropical environment. The primary objective was to determine the energy saving potential of vegetation for the tropical residence. The secondary objective was to investigate the effect of vegetation on modifying the outdoor temperature around a single-family house in a hot-humid climate.</p> <p>Monitoring of household electricity use in the two Malaysian cities, Shah Alam and Putrajaya, has shown that at night time, when families are at home, is when airconditioning is used the most. Building surfaces on the east and west side are most affected by the sun, gaining and storing heat throughout the day until night time, when it is released into the house as the outdoor temperatures cool. Planting the right species, size and shape of trees, shrubs, vines, groundcover, and turf in strategic positions around a garden can greatly reduce the temperature around buildings. This in turn reduces the energy used for air conditioning. This study found that strategic landscaping, which resulted in shading and encouraged evapotranspiration and wind channelling, could reduce electricity use and costs by as much as 20%. The physical characteristics of buildings including their construction, size and age, combined with their landscape designs were looked at in 50 private houses in Malaysia. Measurements were taken from several outdoor and indoor locations around the houses. The findings showed that strategic design of landscaping could reduce heat build-up in a house, by shading, evapotranspiration and wind channelling by as much as 4°C for the exterior and 3°C for the interior spaces.</p> <p>These results demonstrate how strategic landscaping can assist in creating a favourable microclimate in a house, which will help reduce energy consumption. Its effect can extend beyond the residential to have a positive influence on an area’s macroclimate and at a regional scale.</p>


2016 ◽  
Vol 1 (3) ◽  
Author(s):  
Wan Hashimah Wan Ismail ◽  
Low Hui Ching

The back lane is often associated with annoying, disgusting, narrow and dark. This paper concerns the use of the back lanes of the old shop houses in China Town, Kuala Lumpur.  The instruments used in collecting data include observation, unstructured interview and literature review.  The use and physical characteristics of back lanes were identified.  It was found that the back lanes of China Town in Kuala Lumpur showed the success of turning back streets into lively alleys.  Thus, the back lane could be considered as part of urban design strategies and not as leftover spaces.© 2016. The Authors. Published for AMER ABRA by e-International Publishing House, Ltd., UK. Peer–review under responsibility of AMER (Association of Malaysian Environment-Behaviour Researchers), ABRA (Association of Behavioural Researchers on Asians) and cE-Bs (Centre for Environment-Behaviour Studies, Faculty of Architecture, Planning & Surveying, Universiti Teknologi MARA, Malaysia.Keywords: back  lane; social place; pedestrian; urban


2020 ◽  
Vol 19 (1) ◽  
pp. 11-18
Author(s):  
Calin Gabriel Corduban ◽  
Aurora Irina Dumitrascu ◽  
Tania Mariana Hapurne ◽  
Irina Bliuc ◽  
Adriana Kadhim Abid ◽  
...  

2016 ◽  
Vol 1 (3) ◽  
pp. 293
Author(s):  
Wan Hashimah Wan Ismail ◽  
Low Hui Ching

The back lane is often associated with annoying, disgusting, narrow and dark. This paper concerns the use of the back lanes of the old shop houses in China Town, Kuala Lumpur. The instruments used in collecting data include observation, unstructured interview and literature review. The use and physical characteristics of back lanes were identified. It was found that the back lanes of China Town in Kuala Lumpur showed the success of turning back streets into lively alleys. Thus, the back lane could be considered as part of urban design strategies and not as leftover spaces.© 2016. The Authors. Published for AMER ABRA by e-International Publishing House, Ltd., UK. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).Peer–review under responsibility of AMER (Association of Malaysian Environment-Behaviour Researchers), ABRA (Association of Behavioural Researchers on Asians) and cE-Bs (Centre for Environment-Behaviour Studies), Faculty of Architecture, Planning & Surveying, Universiti Teknologi MARA, Malaysia.Keywords: back lane; social place; pedestrian; urban


Author(s):  
Zeynep Sadıklar ◽  
Filiz Tavşan

People interact with surfaces in interior spaces, where a huge part of their life lasts. Many of these surfaces which surrounds the interior spaces are covering or coating materials in various textures and shapes. Materials used in interior surfaces are applied for various purposes. Protection, insulation or decoration can be considered as the main objective of these purposes.This study aims to research what kind of polymer based surface materials are used by interior designers and their reasons, frequency and area of use.  For this reason, the study is composed on a questionnaire. The questions are prepared by summarizing the polymer based material information obtained from the literature. The questionnaire participants are interior designers who are actively working in the field. With this group, a survey on selection of plastic materials has been made. Survey results are explained in the findings. The last chapter includes the conclusions and recommendations of the study.Keywords: Interior design, surface materials, plastics, polymers. 


2011 ◽  
Vol 80-81 ◽  
pp. 767-773
Author(s):  
Hai Gang Sun ◽  
Yong Zhou

Thermal design and the working temperature control have been a key factor in the design of electronic devices and system. In this paper, a sort of heat sink collocated with high-power IGBT module, which is commonly used in car-carrying motor control system, is designed based on thermal analysis by means of CFD simulation and computer-aided analyzing, also the influence relations of structure parameters with thermal performance are studied. With thermal control as the overall design objective, structure parameters of heat sink are determined according to the obtained relations. Further, thermal performance of the designed heat sink is simulated and analyzed in CFD software to examine the validity of the design result. In this way, a method of thermal analyzing and structure parameter design for heat sink, which is proved as an efficacious approach, is introduced and can be used to thermal design and analysis for similar products.


2019 ◽  
pp. 1253-1280
Author(s):  
Xiaocun Zhu ◽  
Pius Leuba Dit Galland ◽  
Ryan D. Dick ◽  
Raefer K. Wallis

This chapter uses air pollution to illustrate how regeneration can be achieved within interior environments. It explores urban growth and reveals the impact that increasing populations and modern lifestyles have on interior spaces, people's interactions, the natural environment, and human health. Air pollution and Indoor Air Quality (IAQ) are identified as key indicators of urban vitality and quality. Performance driven design and healthy IAQ solutions are highlighted as decisive drivers towards regenerative urban environments. The open flow of personally relevant, objective data is shown to be a strong driver for public awareness and bottom-up, sustainable change. The text illustrates how to create health-giving cities that support human activities while simultaneously providing health benefits to occupants. The aim of this chapter is to provide readers with replicable design strategies and catalyze industry demand for performance driven, regenerative urban interior environments.


Sign in / Sign up

Export Citation Format

Share Document