scholarly journals Влияние адсорбированных молекул СО на электронное состояние нанопленок иттербия, выращиваемых на кремниевых подложках

2019 ◽  
Vol 89 (7) ◽  
pp. 1086
Author(s):  
М.В. Кузьмин ◽  
М.А. Митцев
Keyword(s):  
Carbon Monoxide ◽  
Single Crystal ◽  
Single Crystal Silicon ◽  
Film Surface ◽  
Electronic Configuration ◽  
Surface Orientation ◽  
Silicon Substrates ◽  
Crystal Silicon ◽  
Adsorption Of Co ◽  
Gas Molecules

Adsorption of carbon monoxide (CO) molecules on ytterbium nanofilms with the thickness of 16 – 200 monolayers (6.1 – 76 nm) has been studied. The films are grown on single-crystal silicon substrates with the (111) surface orientation. It is shown that before the adsorption of CO molecules, ytterbium is divalent with the electronic configuration of [Xe]4f146s2. Upon the adsorption of gas molecules, a layer of trivalent ytterbium (the electronic configuration is [Xe]4f135d16s2), which is adjacent to the film surface, is formed. Evaluations of the thickness of the layer modified by adsorbed CO molecules are performed. Such evaluations have given rise to the values within 9 – 22 monolayers (3.4 – 8.4 nm).

Protective CVD Mullite Coatings on Single-Crystal Silicon Substrates

JOM ◽  
2013 ◽  
Vol 65 (4) ◽  
pp. 567-573 ◽  
Author(s):  
Jiapeng Xu ◽  
Daniel Erickson ◽  
Sudesna Roy ◽  
Vinod Sarin
Keyword(s):  
Single Crystal ◽  
Single Crystal Silicon ◽  
Silicon Substrates ◽  
Crystal Silicon ◽  
Mullite Coatings

Shallow Contact Formation of Gadolinium Silicide

1983 ◽  
Vol 25 ◽  
Author(s):  
I. C. Cheng ◽  
S. S. Lau ◽  
R. D. Thompson ◽  
K. N. Tu
Keyword(s):  
Heat Treatment ◽  
Single Crystal ◽  
Schottky Barrier Height ◽  
Single Crystal Silicon ◽  
Atomic Ratio ◽  
Silicon Substrates ◽  
Formation Temperature ◽  
Crystal Silicon ◽  
Contact Formation ◽  
Convenient Technique

ABSTRACTGadolinium silicide with its attractive features of low formation temperature of about 350°C and low Schottky barrier height on n-type single-crystal silicon substrates (ϕnB1∼O.4ev,ϕpB ∼ 0.7ev) was chosen for studying the feasibility of forming shallow uniform contacts. Samples with various compositions prepared by both bilayer evaporation with a configuration of Si(α)/Gd/Si(xtl) and coevaporation with a Si−Gd /Si(xtl)structure were used for studying the contact formation as a function of composition and heat treatment. We found that shallow contact formation can be achieved provided that the following conditions are met: (a) for bilayer evaporation, the atomic ratio of Si(α)/Gd ≥ 2 should be maintained, (b) for coevaporation, the Si to Gd atomic ratio between 1.7 and 2.0 is desired. The bilayer deposition scheme appears to be a more convenient technique to use in practice.

Highly oriented, textured diamond films on silicon via bias-enhanced nucleation and textured growth

1993 ◽  
Vol 8 (6) ◽  
pp. 1334-1340 ◽  
Author(s):  
B.R. Stoner ◽  
S.R. Sahaida ◽  
J.P. Bade ◽  
P. Southworth ◽  
P.J. Ellis
Keyword(s):  
Silicon Surface ◽  
Diamond Films ◽  
Single Crystal Silicon ◽  
Film Surface ◽  
Potential Effect ◽  
Structural Defects ◽  
Silicon Substrates ◽  
Electrical Characteristics ◽  
Crystal Silicon ◽  
Nucleation Stage

Highly oriented diamond films were grown on single-crystal silicon substrates. Textured films were first nucleated by a two-step process that involved the conversion of the silicon surface to an epitaxial SiC layer, followed by bias-enhanced nucleation. The nucleation stage, which produced a partially oriented diamond film, was immediately followed by a (100) textured growth process, thus resulting in a film surface where approximately 100% of the grains are epitaxially oriented relative to the silicon substrate. The diamond films were characterized by both SEM and Raman spectroscopy. Structural defects in the film are discussed in the context of their potential effect on the electrical characteristics of the resulting film.

Silicon Layers Grown on Patterned Substrates by Liquid Phase Epitaxy

1985 ◽  
Vol 54 ◽  
Author(s):  
E. Bauser ◽  
D. KÄss ◽  
M. Warth ◽  
H. P. Strunk
Keyword(s):  
Liquid Phase ◽  
Single Crystal ◽  
Liquid Phase Epitaxy ◽  
Single Crystal Silicon ◽  
Growth Conditions ◽  
Silicon Substrates ◽  
Crystal Silicon ◽  
Surfaces And Interfaces ◽  
Lateral Overgrowth ◽  
Via Holes

ABSTRACTSingle-crystal silicon layers and doping multilayers have been grown by liquid phase qpitaxy on silicon substrates. The substrates were either partially masked by SiO2, with via holes of various shapes and sizes, or patterned with SiO2 stripes, or profiled with grooves and ridges. The via holes and grooves were just refilled, or they acted as seeding areas for lateral overgrowth of the oxidized wafer up to 100μm. The silicon layers, interfaces and heterointerfaces were free of defects. With appropriate growth conditions the surfaces and interfaces of the epitaxial Si were outstandingly planar.

Effects of Interlayers on the Scratch Adhesion Performance of Ultra-Thin Films of Copper and Gold on Silicon Substrates

1994 ◽  
Vol 356 ◽  
Author(s):  
S. D. McAdams ◽  
T. Y. Tsui ◽  
W. C. Oliver ◽  
G. M. Pharr
Keyword(s):  
Thin Films ◽  
Single Crystal ◽  
Single Crystal Silicon ◽  
Silicon Substrates ◽  
Scratch Testing ◽  
Crystal Silicon ◽  
Testing Apparatus ◽  
Low Load ◽  
Adhesion Performance ◽  
Made In

AbstractScratch testing has long been used to assess the adhesion of a film to its substrate. As film thicknesses have decreased, the need for greater precision and sensitivity in the scratch testing apparatus has increased. To this end, a nanoindenter was modified to make finely controlled, low-load scratches. Scratches at various loads and two orientations of a Berkovich scratching diamond were made in films of 100 nm of gold and 200 nm of copper, each on single crystal silicon. For each film type, samples with no interlayer, with an SiO2 interlayer, and with a TiW on SiO2 interlayer were tested. The scratch morphology was found to vary in a regular way with load, diamond orientation and interlayer material.

Fast Scanned Energy Beam Induced Explosive Crystallization of Ion Implantation Amorphized Poly and Single Crystal Silicon Substrates

1981 ◽  
Vol 4 ◽  
Author(s):  
M. Lerme ◽  
T. Ternisien D'ouville ◽  
Duy-Phach Vu ◽  
A. Perio ◽  
G.A. Rozgonyi ◽  
...  
Keyword(s):  
Single Crystal ◽  
Solid Phase ◽  
Single Crystal Silicon ◽  
Grain Structure ◽  
Silicon Substrates ◽  
Crystal Silicon ◽  
Energy Beam ◽  
Glass Substrates ◽  
Explosive Crystallization ◽  
Si Films

ABSTRACTExplosive crystallisation induced by an electron beam and by a CW Ar+ laser operating in fast scanning mode is observed for the first time on amorphized silicon layers created by implantation on either polycrystalline films deposited on Si02 or single crystal silicon substrates. The grain structure in the explosive crescents is studied by preferential chemical etching in conjunction with Nomarski optical microscopy, SEM and TEM. The results are similar to the so-called solid-phase explosive crystallization previously observed in a-Si films deposited on glass substrates.

Sign in / Sign up

Export Citation Format

Share Document