Fast Scanned Energy Beam Induced Explosive Crystallization of Ion Implantation Amorphized Poly and Single Crystal Silicon Substrates

1981 ◽  
Vol 4 ◽  
Author(s):  
M. Lerme ◽  
T. Ternisien D'ouville ◽  
Duy-Phach Vu ◽  
A. Perio ◽  
G.A. Rozgonyi ◽  
...  
Keyword(s):  
Single Crystal ◽  
Solid Phase ◽  
Single Crystal Silicon ◽  
Grain Structure ◽  
Silicon Substrates ◽  
Crystal Silicon ◽  
Energy Beam ◽  
Glass Substrates ◽  
Explosive Crystallization ◽  
Si Films

ABSTRACTExplosive crystallisation induced by an electron beam and by a CW Ar+ laser operating in fast scanning mode is observed for the first time on amorphized silicon layers created by implantation on either polycrystalline films deposited on Si02 or single crystal silicon substrates. The grain structure in the explosive crescents is studied by preferential chemical etching in conjunction with Nomarski optical microscopy, SEM and TEM. The results are similar to the so-called solid-phase explosive crystallization previously observed in a-Si films deposited on glass substrates.

Microwave Activation of Dopants & Solid Phase Epitaxy in Silicon

2007 ◽  
Vol 989 ◽  
Author(s):  
Douglas C. Thompson ◽  
J. Decker ◽  
T. L. Alford ◽  
J. W. Mayer ◽  
N. David Theodore
Keyword(s):  
Single Crystal ◽  
Microwave Heating ◽  
Rutherford Backscattering Spectrometry ◽  
Solid Phase ◽  
Single Crystal Silicon ◽  
Silicon Substrates ◽  
Crystal Silicon ◽  
Cross Sectional ◽  
Transmission Electron ◽  
Microwave System

AbstractMicrowave heating is used to activate solid phase epitaxial re-growth of amorphous silicon layers on single crystal silicon substrates. Layers of single crystal silicon were made amorphous through ion implantation with varying doses of boron or arsenic. Microwave processing occurred inside a 2.45 GHz, 1300 W cavity applicator microwave system for time-durations of 1-120 minutes. Sample temperatures were monitored using optical pyrometery. Rutherford backscattering spectrometry, and cross-sectional transmission electron microscopy were used to monitor crystalline quality in as-implanted and annealed samples. Sheet resistance readings show dopant activation occurring in both boron and arsenic implanted samples. In samples with large doses of arsenic, the defects resulting from vacancies and/or micro cluster precipitates are seen in transmission electron micrographs. Materials properties are used to explain microwave heating of silicon and demonstrate that the damage created in the implantation process serves to enhance microwave absorption.

TEM characterization of Au/Polysilicon interactions

1990 ◽  
Vol 48 (4) ◽  
pp. 650-651
Author(s):  
N. David Theodore ◽  
Leslie H. Allen ◽  
C. Barry Carter ◽  
James W. Mayer
Keyword(s):  
Solid Phase ◽  
Single Crystal Silicon ◽  
Chemical Vapor ◽  
Electrical Contacts ◽  
Silicon Substrates ◽  
Crystal Silicon ◽  
Transmission Electron ◽  
Polysilicon Films ◽  
The Stability

Metal/polysilicon investigations contribute to an understanding of issues relevant to the stability of electrical contacts in semiconductor devices. These investigations also contribute to an understanding of Si lateral solid-phase epitactic growth. Metals such as Au, Al and Ag form eutectics with Si. reactions in these metal/polysilicon systems lead to the formation of large-grain silicon. Of these systems, the Al/polysilicon system has been most extensively studied. In this study, the behavior upon thermal annealing of Au/polysilicon bilayers is investigated using cross-section transmission electron microscopy (XTEM). The unique feature of this system is that silicon grain-growth occurs at particularly low temperatures ∽300°C).Gold/polysilicon bilayers were fabricated on thermally oxidized single-crystal silicon substrates. Lowpressure chemical vapor deposition (LPCVD) at 620°C was used to obtain 100 to 400 nm polysilicon films. The surface of the polysilicon was cleaned with a buffered hydrofluoric acid solution. Gold was then thermally evaporated onto the samples.

Protective CVD Mullite Coatings on Single-Crystal Silicon Substrates

JOM ◽  
2013 ◽  
Vol 65 (4) ◽  
pp. 567-573 ◽  
Author(s):  
Jiapeng Xu ◽  
Daniel Erickson ◽  
Sudesna Roy ◽  
Vinod Sarin
Keyword(s):  
Single Crystal ◽  
Single Crystal Silicon ◽  
Silicon Substrates ◽  
Crystal Silicon ◽  
Mullite Coatings

scholarly journals Влияние адсорбированных молекул СО на электронное состояние нанопленок иттербия, выращиваемых на кремниевых подложках

2019 ◽  
Vol 89 (7) ◽  
pp. 1086
Author(s):  
М.В. Кузьмин ◽  
М.А. Митцев
Keyword(s):  
Carbon Monoxide ◽  
Single Crystal ◽  
Single Crystal Silicon ◽  
Film Surface ◽  
Electronic Configuration ◽  
Surface Orientation ◽  
Silicon Substrates ◽  
Crystal Silicon ◽  
Adsorption Of Co ◽  
Gas Molecules

Adsorption of carbon monoxide (CO) molecules on ytterbium nanofilms with the thickness of 16 – 200 monolayers (6.1 – 76 nm) has been studied. The films are grown on single-crystal silicon substrates with the (111) surface orientation. It is shown that before the adsorption of CO molecules, ytterbium is divalent with the electronic configuration of [Xe]4f146s2. Upon the adsorption of gas molecules, a layer of trivalent ytterbium (the electronic configuration is [Xe]4f135d16s2), which is adjacent to the film surface, is formed. Evaluations of the thickness of the layer modified by adsorbed CO molecules are performed. Such evaluations have given rise to the values within 9 – 22 monolayers (3.4 – 8.4 nm).

Shallow Contact Formation of Gadolinium Silicide

1983 ◽  
Vol 25 ◽  
Author(s):  
I. C. Cheng ◽  
S. S. Lau ◽  
R. D. Thompson ◽  
K. N. Tu
Keyword(s):  
Heat Treatment ◽  
Single Crystal ◽  
Schottky Barrier Height ◽  
Single Crystal Silicon ◽  
Atomic Ratio ◽  
Silicon Substrates ◽  
Formation Temperature ◽  
Crystal Silicon ◽  
Contact Formation ◽  
Convenient Technique

ABSTRACTGadolinium silicide with its attractive features of low formation temperature of about 350°C and low Schottky barrier height on n-type single-crystal silicon substrates (ϕnB1∼O.4ev,ϕpB ∼ 0.7ev) was chosen for studying the feasibility of forming shallow uniform contacts. Samples with various compositions prepared by both bilayer evaporation with a configuration of Si(α)/Gd/Si(xtl) and coevaporation with a Si−Gd /Si(xtl)structure were used for studying the contact formation as a function of composition and heat treatment. We found that shallow contact formation can be achieved provided that the following conditions are met: (a) for bilayer evaporation, the atomic ratio of Si(α)/Gd ≥ 2 should be maintained, (b) for coevaporation, the Si to Gd atomic ratio between 1.7 and 2.0 is desired. The bilayer deposition scheme appears to be a more convenient technique to use in practice.

Sign in / Sign up

Export Citation Format

Share Document