scholarly journals Polynomial Regression Analysis for Removal of Heavy Metal Mixtures in Coagulation/Flocculation of Electroplating Wastewater

2020 ◽  
Vol 21 (1) ◽  
pp. 46
Author(s):  
Siti Wahidah Puasa ◽  
Kamariah Noor Ismail ◽  
Muhammad Amarul Aliff Bin Mahadi ◽  
Nur Ain Zainuddin ◽  
Mohd Nazmi Mohd Mukelas
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Polynomial Regression ◽  
Metal Removal ◽  
Heavy Metal Removal ◽  
Final Concentration ◽  
Operating Conditions ◽  
Synthetic Wastewater ◽  
Metal Mixtures ◽  
Metals Removal

Wastewater produced from the electroplating industry generally consists of heavy metals mixture and organic materials that need to be treated before it can be discharged to the environment. Thus, the present investigation was focused on the selectivity removal of heavy metal mixtures consists of Copper (Cu), Cadmium (Cd), and Zinc (Zn). Several operating conditions, including the effect of pH and coagulant (FeCl3) dosage, were varied to find the best performance of heavy metal removal. Results show the efficiency of heavy metals removal for both wastewater characteristics were approximately 99%. The experimental data on the treatment of synthetic wastewater was plotted using polynomial regression (PR) via Excel software. The value of adjusted R2 obtained for the final concentration of Cu, Zn, and Cd after treatment were 0.6884, 0.9676, and 0.9283, respectively, which shows data were acceptably fitted for Cu and very well fitted for Zn and Cd. The coagulation/flocculation process performed on actual wastewater shows that the lowest final concentration of Cu, Zn, and Cd after treatment were 0.487, 1.232, and 0 mg/L respectively at pH of 12.

Removal of Some Heavy Metals by Electrocoagulation

2012 ◽  
Vol 468-471 ◽  
pp. 2882-2890 ◽  
Author(s):  
R. H. Al Anbari ◽  
S. M. Alfatlawi ◽  
J. H. Albaidhani
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Removal Efficiency ◽  
Metal Removal ◽  
Heavy Metal Removal ◽  
Efficient Treatment ◽  
Electrolytic Cells ◽  
Removal Capacity ◽  
Metals Removal ◽  
Working Parameters

Heavy metal removal by electrocoagulation using iron electrodes material was investigated in this paper. Several working parameters, such as pH, current density and heavy metal ions concentration were studied in an attempt to achieve a higher removal capacity. A simple and efficient treatment process for removal of heavy metals is essentially necessary. The performance of continuous flow electrocoagulation system, with reactor consists of a ladder series of twelve electrolytic cells, each cell containing stainless steel cathode and iron anode. The treatment of synthetic solutions containing Zn 2+,Cu 2+,Ni 2+,Cr 3+,Cd 2+ and Co 2+ ,has been investigated. Results showed that iron is very effective as sacrificial electrode material for heavy metals removal efficiency and cost points. Also it was concluded that the chromium has lower efficient removal as compared to zinc, copper and nickel. At the same time cadmium and cobalt have minimum removal efficiency.

scholarly journals Phycoremediation of Wastewater: Heavy Metal and Nutrient Removal Processes

2014 ◽  
Vol 25 (4) ◽  
pp. 51-54
Author(s):  
Anna Kwarciak-Kozłowska ◽  
Lucyna Sławik-Dembiczak ◽  
Bartłomiej Bańka
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Chlorella Vulgaris ◽  
Municipal Wastewater ◽  
Metal Removal ◽  
Heavy Metal Removal ◽  
Metals Removal ◽  
Iron Manganese ◽  
Influent Wastewater ◽  
P Removal

Abstract Phycoremediation is the use of algae for the removal or biotrans-formation of pollutants from wastewater. The study is a novel at-tempt to integrate nutrient (N and P) removal and some heavy met-als (iron, manganese and zinc) bioaccumulation from municipal wastewater using two microalgae species: Chlorella vulgaris and Scenedesmus armatus. The Chlorella vulgaris showed higher re-moval of total nitrogen (TN) both in influent and effluent waste water than Scenedesmus armatus. Nevertheless, more than 51% of total phosphorus (TP) in effluent and 36% in influent wastewaters were removed by Scenedesmus armatus. More efficient microalga in heavy metal removal in influent wastewater was Scenedesmus armatus. The results showed that Chlorella vulgaris was appropriate for TN removal and bioaccumulation of heavy metals from effluent wastewater. Nevertheless, Scenedesmus armatus was highly pref-erable for heavy metals removal from influent wastewater.

Recent Application of the Various Nanomaterials and Nanocatalysts for the Heavy Metals’ Removal from Wastewater

NANO ◽  
2018 ◽  
Vol 13 (09) ◽  
pp. 1830006 ◽  
Author(s):  
Nader Ghaffari Khaligh ◽  
Mohd Rafie Johan
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Metal Ions ◽  
Heavy Metal Ions ◽  
Metal Removal ◽  
Heavy Metal Removal ◽  
Heavy Metals Removal ◽  
Metals Removal ◽  
Recent Developments ◽  
Carbon Based Nanomaterials

The pollution of water due to the release of heavy metals are particularly problematic and supplies of clean water have become a major problem worldwide. The heavy metal ions can cause toxicities and serious side effects toward human health; therefore, these metal ions should be removed from water and wastewater. A variety of strategies have been developed for efficient heavy metal removal from waters. Adsorption/ion exchange strategy play a great important role in removing heavy metal ions due to their advantages. Nanomaterials are excellent adsorbents and extensive studies have been performed to remove heavy metals from wastewater by developing and using various nanomaterials. Recent developments for the heavy metals removal by various nanomaterials, mainly including carbon-based nanomaterials, iron-based nanomaterials and photocatalytic nanomaterials in batch and flow systems are described in this review.

A Review on Current Development of Animal Bone-Based Sorbent for Heavy Metals Removal from Contaminated Water and Wastewater

2021 ◽  
Vol 897 ◽  
pp. 109-115
Author(s):  
Sri Martini ◽  
Kiagus Ahmad Roni ◽  
Dian Kharismadewi ◽  
Erna Yuliwaty
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Metal Removal ◽  
Inorganic Compounds ◽  
Heavy Metal Removal ◽  
Influential Factors ◽  
Contaminated Water ◽  
Animal Bone ◽  
Water And Wastewater ◽  
Cow Bone

This review article presents the usage of various animal bones such as chicken bone, fish bone, pig bone, camel bone, and cow bone as reliable biosorbent materials to remove heavy metals contained in contaminated water and wastewater. The sources and toxicity effects of heavy metal ions are also discussed properly. Then specific insights related to adsorption process and its influential factors along with the proven potentiality of selected biosorbents especially derived from animal bone are also explained. As the biosorbents are rich in particular organic and inorganic compounds and functional groups in nature, they play an important role in heavy metal removal from contaminated solutions. Overall, after conducting study reports on the literature, a brief conclusion can be drawn that animal bone waste has satisfactory efficacy as effective, efficient, and environmentally friendly sorbent material.

Heavy metal removal from wastewater and leachate co-treatment sludge by sulfur oxidizing bacteria

2001 ◽  
Vol 44 (10) ◽  
pp. 53-58 ◽  
Author(s):  
L. C. Aralp ◽  
A. Erdincler ◽  
T. T. Onay
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Municipal Wastewater ◽  
Metal Removal ◽  
Heavy Metal Removal ◽  
Heavy Metal Concentration ◽  
Organic Content ◽  
Removal Of Heavy Metals ◽  
Sulfur Oxidizing ◽  
Sulfur Oxidizing Bacteria

Heavy metal concentration in sludge is one of the major obstacles for the application of sludge on land. There are various methods for the removal of heavy metals in sludge. Using sulfur oxidizing bacteria for microbiological removal of heavy metals from sludges is an outstanding option because of high metal solubilization rates and the low cost. In this study, bioleaching by indigenous sulfur oxidizing bacteria was applied to sludges generated from the co-treatment of municipal wastewater and leachate for the removal of selected heavy metals. Sulfur oxidizing bacteria were acclimated to activated sludge. The effect of the high organic content of leachate on the bioleaching process was investigated in four sets of sludges having different concentrations of leachate. Sludges in Sets A, B, C and D were obtained from co-treatment of wastewater and 3%, 5%, 7% and 10% (v/v) leachate respectively. The highest Cr, Ni and Fe solubilization was obtained from Set A. Sulfur oxidizing bacteria were totally inhibited in Set D that received the highest volume of leachate.

Nanosheet-based magadiite: a controllable two-dimensional trap for selective capture of heavy metals

2018 ◽  
Vol 6 (28) ◽  
pp. 13624-13632 ◽  
Author(s):  
He Ding ◽  
Yang Chen ◽  
Tianyi Fu ◽  
Peng Bai ◽  
Xianghai Guo
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Interlayer Space ◽  
Metal Removal ◽  
Heavy Metal Removal ◽  
Two Dimensional ◽  
2D Structure

Nanosheet-based magadiites are promising adsorbents with controlled interlayer space and a well-defined 2D structure, which make them new candidates for heavy metal removal.

scholarly journals Enhanced Adsorptive Bioremediation of Heavy Metals (Cd2+, Cr6+, Pb2+) by Methane-Oxidizing Epipelon

2020 ◽  
Vol 8 (4) ◽  
pp. 505 ◽  
Author(s):  
Muhammad Faheem ◽  
Sadaf Shabbir ◽  
Jun Zhao ◽  
Philip G Kerr ◽  
Nasrin Sultana ◽  
...  
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Methane Oxidation ◽  
Metal Removal ◽  
Heavy Metal Removal ◽  
16S Rrna Genes ◽  
Rrna Genes ◽  
Aqueous Environment ◽  
Type I ◽  
Methane Concentrations

Cadmium (Cd), chromium (Cr) and lead (Pb) are heavy metals that have been classified as priority pollutants in aqueous environment while methane-oxidizing bacteria as a biofilter arguably consume up to 90% of the produced methane in the same aqueous environment before it escapes into the atmosphere. However, the underlying kinetics and active methane oxidizers are poorly understood for the hotspot of epipelon that provides a unique micro-ecosystem containing diversified guild of microorganisms including methane oxidizers for potential bioremediation of heavy metals. In the present study, the Pb2+, Cd2+and Cr6+ bioremediation potential of epipelon biofilm was assessed under both high (120,000 ppm) and near-atmospheric (6 ppm) methane concentrations. Epipelon biofilm demonstrated a high methane oxidation activity following microcosm incubation amended with a high concentration of methane, accompanied by the complete removal of 50 mg L−1 Pb2+ and 50 mg L−1 Cd2+ (14 days) and partial (20%) removal of 50 mg L−1 Cr6+ after 20 days. High methane dose stimulated a faster (144 h earlier) heavy metal removal rate compared to near-atmospheric methane concentrations. DNA-based stable isotope probing (DNA-SIP) following 13CH4 microcosm incubation revealed the growth and activity of different phylotypes of methanotrophs during the methane oxidation and heavy metal removal process. High throughput sequencing of 13C-labelled particulate methane monooxygenase gene pmoA and 16S rRNA genes revealed that the prevalent active methane oxidizers were type I affiliated methanotrophs, i.e., Methylobacter. Type II methanotrophs including Methylosinus and Methylocystis were also labeled only under high methane concentrations. These results suggest that epipelon biofilm can serve as an important micro-environment to alleviate both methane emission and the heavy metal contamination in aqueous ecosystems with constant high methane fluxes.

scholarly journals Advances in heavy metal removal by sulfate-reducing bacteria

2020 ◽  
Vol 81 (9) ◽  
pp. 1797-1827 ◽  
Author(s):  
Ya-Nan Xu ◽  
Yinguang Chen
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Industrial Development ◽  
Metal Removal ◽  
Heavy Metal Removal ◽  
Sulfate Reducing Bacteria ◽  
Sulfate Reducing ◽  
Recent Advances ◽  
Conventional Methods ◽  
Reducing Bacteria

Abstract Industrial development has led to generation of large volumes of wastewater containing heavy metals, which need to be removed before the wastewater is released into the environment. Chemical and electrochemical methods are traditionally applied to treat this type of wastewater. These conventional methods have several shortcomings, such as secondary pollution and cost. Bioprocesses are gradually gaining popularity because of their high selectivities, low costs, and reduced environmental pollution. Removal of heavy metals by sulfate-reducing bacteria (SRB) is an economical and effective alternative to conventional methods. The limitations of and advances in SRB activity have not been comprehensively reviewed. In this paper, recent advances from laboratory studies in heavy metal removal by SRB were reported. Firstly, the mechanism of heavy metal removal by SRB is introduced. Then, the factors affecting microbial activity and metal removal efficiency are elucidated and discussed in detail. In addition, recent advances in selection of an electron donor, enhancement of SRB activity, and improvement of SRB tolerance to heavy metals are reviewed. Furthermore, key points for future studies of the SRB process are proposed.

scholarly journals Heavy metal removal from wastewater using various adsorbents: a review

2016 ◽  
Vol 7 (4) ◽  
pp. 387-419 ◽  
Author(s):  
Renu ◽  
Madhu Agarwal ◽  
K. Singh
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Aquatic Ecosystems ◽  
Adsorption Process ◽  
Metal Removal ◽  
Low Cost ◽  
Heavy Metal Removal ◽  
Review Article ◽  
Removal Capacity ◽  
Removal Of Heavy Metals

Heavy metals are discharged into water from various industries. They can be toxic or carcinogenic in nature and can cause severe problems for humans and aquatic ecosystems. Thus, the removal of heavy metals from wastewater is a serious problem. The adsorption process is widely used for the removal of heavy metals from wastewater because of its low cost, availability and eco-friendly nature. Both commercial adsorbents and bioadsorbents are used for the removal of heavy metals from wastewater, with high removal capacity. This review article aims to compile scattered information on the different adsorbents that are used for heavy metal removal and to provide information on the commercially available and natural bioadsorbents used for removal of chromium, cadmium and copper, in particular.

scholarly journals The Potential of Microbial Fuel Cells for Remediation of Heavy Metals from Soil and Water—Review of Application

2019 ◽  
Vol 7 (12) ◽  
pp. 697 ◽  
Author(s):  
Chaolin Fang ◽  
Varenyam Achal
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Microbial Fuel Cells ◽  
Electrode Materials ◽  
Metal Removal ◽  
Heavy Metal Removal ◽  
External Energy ◽  
Microbial Electrolysis Cells ◽  
Cadmium And Lead ◽  
Soil And Water

The global energy crisis and heavy metal pollution are the common problems of the world. It is noted that the microbial fuel cell (MFC) has been developed as a promising technique for sustainable energy production and simultaneously coupled with the remediation of heavy metals from water and soil. This paper reviewed the performances of MFCs for heavy metal removal from soil and water. Electrochemical and microbial biocatalytic reactions synergistically resulted in power generation and the high removal efficiencies of several heavy metals in wastewater, such as copper, hexavalent chromium, mercury, silver, thallium. The coupling system of MFCs and microbial electrolysis cells (MECs) successfully reduced cadmium and lead without external energy input. Moreover, the effects of pH and electrode materials on the MFCs in water were discussed. In addition, the remediation of heavy metal-contaminated soil by MFCs were summarized, noting that plant-MFC performed very well in the heavy metal removal.

Sign in / Sign up

Export Citation Format

Share Document