scholarly journals Identification of Rice Variety Using Geometric Features and Neural Network

2019 ◽  
Vol 13 (3) ◽  
pp. 301
Author(s):  
Wahyu Srimulyani ◽  
Aina Musdholifah
Keyword(s):  
Neural Network ◽  
Rice Variety ◽  
Physical Characteristics ◽  
Training Data ◽  
Test Results ◽  
Trial And Error ◽  
Rice Varieties ◽  
Segmentation Evaluation ◽  
The Neural Network

 Indonesia has many food varieties, one of which is rice varieties. Each rice variety has physical characteristics that can be recognized through color, texture, and shape. Based on these physical characteristics, rice can be identified using the Neural Network. Research using 12 features has not optimal results. This study proposes the addition of geometry features with Learning Vector Quantization and Backpropagation algorithms that are used separately.The trial uses data from 9 rice varieties taken from several regions in Yogyakarta. The acquisition of rice was carried out using a camera Canon D700 with a kit lens and maximum magnification, 55 mm. Data sharing is carried out for training and testing, and the training data was sharing with the quality of the rice. Preprocessing of data was carried out before feature extraction with the trial and error thresholding process of segmentation. Evaluation is done by comparing the results of the addition of 6 geometry features and before adding geometry features.The test results show that the addition of 6 geometry features gives an increase in the value of accuracy. This is evidenced by the Backpropagation algorithm resulting in increased accuracy of 100% and 5.2% the result of the LVQ algorithm.

scholarly journals Digital Image Based Identification of Rice Variety Using Image Processing and Neural Network

2015 ◽  
Vol 16 (1) ◽  
pp. 182
Author(s):  
Lilik Sumaryanti ◽  
Aina Musdholifah ◽  
Sri Hartati
Keyword(s):  
Neural Network ◽  
Image Processing ◽  
Classification Accuracy ◽  
Rice Variety ◽  
Texture Features ◽  
Rice Varieties ◽  
Food Grains ◽  
Average Accuracy ◽  
Neural Network Algorithm

The increased of consumer concern on the originality of rice  variety and the quality of rice leads to originality certification of rice by existing institutions. Technology helps human to perform evaluations of food grains using images of objects. This study developed a system used as a tool to identify rice varieties. Identification process was performed by analyzing rice images using image processing. The analyzed features for identification consisted of six color features, four morphological features, and two texture features. Classifier used LVQ neural network algorithm. Identification results using a combination of all features gave average accuracy of 70,3% with the highest classification accuracy level of 96,6% for Mentik Wangi and the lowest classification accuracy of 30%  for Cilosari.

scholarly journals Neural Network Autoregressive For Predicting Daily Gold Price

Jurnal INFORM ◽  
2020 ◽  
Vol 5 (2) ◽  
pp. 69
Author(s):  
Mohamad As'ad ◽  
Sujito Sujito ◽  
Sigit Setyowibowo
Keyword(s):  
Neural Network ◽  
Precious Metal ◽  
Secondary Data ◽  
Gold Price ◽  
Training Data ◽  
Test Results ◽  
Forecasting Methods ◽  
The Neural Network

Gold is a precious metal that functions as a gem and also an investment. Gold investment is the reason for many people because it is practical, not easily damaged, easy cashed, not taxable, and other purposes. Based on this, many people choose gold as an investment. The problem for people who will invest in gold is related to uncertain gold price predictions so that the accuracy of forecasting methods are needed. The purpose of this paper is to forecast accurately daily gold prices using the Neural Network Autoregressive (NNAR) method. Training Data to find out the value of accuracy in the NNAR method uses secondary data obtained from Yahoo Finance in the form of daily gold prices. Test results on the NNAR method produce a better and more accurate level using the NNAR (25,13) model with a MAPE value of 0.370707, a MASE of 0.5851083, and an RMSE of 6.939331. The conclusion of the results of this paper is the daily price of gold is influenced by the daily price of gold a day ago to 24 periods ago with the NNAR (25,13) model.

scholarly journals System for neural network recognition of malignant pigmented skin neoplasms with image pre-processing

2021 ◽  
Vol 2052 (1) ◽  
pp. 012023
Author(s):  
U A Lyakhova ◽  
P A Lyakhov ◽  
R I Abdulkadirov ◽  
G A Efimenko ◽  
S A Romanov ◽  
...  
Keyword(s):  
Neural Network ◽  
Image Classification ◽  
Software Package ◽  
Skin Neoplasms ◽  
Recognition System ◽  
Training Data ◽  
Processing Stage ◽  
The Neural Network ◽  
Visual Diagnosis

Abstract The article presents a system for the recognition of malignant pigmented skin neoplasms with a preliminary processing stage. Image pre-processing consists of removing hair structures from images, as well as resizing images and their further augmentation. Augmentation made it possible to increase the variety of training data, balance the number of images in different categories, and avoid retraining the neural network. The modeling was carried out using the MatLab R2020b software package for solving technical calculations on clinical dermatoscopic images from the international open archive ISIC Melanoma Project. The proposed system for the recognition of malignant pigmented skin neoplasms made it possible to increase the accuracy of image classification up to 80.55%. The use of the proposed recognition system will make it possible to increase the efficiency and quality of diagnosis, in comparison with the methods of visual diagnosis.

scholarly journals Comparison of Morphological and Physicochemical Properties of a Floury Rice Variety upon Pre-Harvest Sprouting

Foods ◽  
2021 ◽  
Vol 10 (4) ◽  
pp. 746
Author(s):  
Chae-Min Han ◽  
Jong-Hee Shin ◽  
Jung-Bae Kwon ◽  
Jong-Soo Kim ◽  
Jong-Gun Won ◽  
...  
Keyword(s):  
Physicochemical Properties ◽  
Rice Variety ◽  
Wheat Variety ◽  
Economic Loss ◽  
Rice Grain ◽  
Starch Granules ◽  
Rice Varieties ◽  
Starch Structure ◽  
Gelatinization Properties

Pre-harvest sprouting (PHS) severely reduces rice grain yield, significantly affects grain quality, and leads to substantial economic loss. In this study, we aimed to characterize the physicochemical properties and processing quality of the Garumi 2 flour rice variety under PHS conditions and compare them with those of the Seolgaeng, Hangaru, Shingil, and Ilpum rice varieties and the Keumkang wheat variety. Analysis of the molecular structure of starch revealed uniform starch granules, increased proportions of short-chain amylopectin in DP 6–12 (51.0–55.3%), and enhanced crystallinity (30.7–35.7%) in rice varieties for flour compared with the Ilpum cooking rice variety. PHS significantly altered the starch structure and gelatinization properties of Garumi 2. It also caused surface pitting and roughness in Garumi 2 starch granules and decreased their crystallinity. Collectively, the findings of this study provide important novel insights into the effects of PHS on the physicochemical properties of Garumi 2 floury rice for flour.

scholarly journals Rethinking the Random Cropping Data Augmentation Method Used in the Training of CNN-Based SAR Image Ship Detector

2020 ◽  
Vol 13 (1) ◽  
pp. 34
Author(s):  
Rong Yang ◽  
Robert Wang ◽  
Yunkai Deng ◽  
Xiaoxue Jia ◽  
Heng Zhang
Keyword(s):  
Neural Network ◽  
Data Augmentation ◽  
Back Propagation ◽  
Detection Performance ◽  
Training Data ◽  
Sar Image ◽  
Optical Images ◽  
The Neural Network ◽  
Effective Training ◽  
Standard Configuration

The random cropping data augmentation method is widely used to train convolutional neural network (CNN)-based target detectors to detect targets in optical images (e.g., COCO datasets). It can expand the scale of the dataset dozens of times while consuming only a small amount of calculations when training the neural network detector. In addition, random cropping can also greatly enhance the spatial robustness of the model, because it can make the same target appear in different positions of the sample image. Nowadays, random cropping and random flipping have become the standard configuration for those tasks with limited training data, which makes it natural to introduce them into the training of CNN-based synthetic aperture radar (SAR) image ship detectors. However, in this paper, we show that the introduction of traditional random cropping methods directly in the training of the CNN-based SAR image ship detector may generate a lot of noise in the gradient during back propagation, which hurts the detection performance. In order to eliminate the noise in the training gradient, a simple and effective training method based on feature map mask is proposed. Experiments prove that the proposed method can effectively eliminate the gradient noise introduced by random cropping and significantly improve the detection performance under a variety of evaluation indicators without increasing inference cost.

Application of ANN Back-Propagation for Fracture Design Parameters in Extra-Low Cycle Rotating Bending Fatigue

2009 ◽  
Vol 610-613 ◽  
pp. 450-453
Author(s):  
Hong Yan Duan ◽  
You Tang Li ◽  
Jin Zhang ◽  
Gui Ping He
Keyword(s):  
Neural Network ◽  
Neural Network Model ◽  
Back Propagation ◽  
Training Data ◽  
Design Parameters ◽  
Ann Model ◽  
Bending Fatigue ◽  
The Neural Network ◽  
Rotating Bending Fatigue ◽  
Rotating Bending

The fracture problems of ecomaterial (aluminum alloyed cast iron) under extra-low cycle rotating bending fatigue loading were studied using artificial neural networks (ANN) in this paper. The training data were used in the formation of training set of ANN. The ANN model exhibited excellent in results comparison with the experimental results. It was concluded that predicted fracture design parameters by the trained neural network model seem more reasonable compared to approximate methods. It is possible to claim that, ANN is fairly promising prediction technique if properly used. Training ANN model was introduced at first. And then the Training data for the development of the neural network model was obtained from the experiments. The input parameters, notch depth, the presetting deflection and tip radius of the notch, and the output parameters, the cycle times of fracture were used during the network training. The neural network architecture is designed. The ANN model was developed using back propagation architecture with three layers jump connections, where every layer was connected or linked to every previous layer. The number of hidden neurons was determined according to special formula. The performance of system is summarized at last. In order to facilitate the comparisons of predicted values, the error evaluation and mean relative error are obtained. The result show that the training model has good performance, and the experimental data and predicted data from ANN are in good coherence.

scholarly journals Bootstrapping a Neural Morphological Generator from Morphological Analyzer Output for Inuktitut

2019 ◽  
Vol 2 (1) ◽  
Author(s):  
Jeffrey Micher
Keyword(s):  
Neural Network ◽  
Training Data ◽  
Data Set ◽  
Set Size ◽  
The Neural Network ◽  
Surface Character ◽  
Finite State ◽  
Character Sequences ◽  
Finite State Transducer

We present a method for building a morphological generator from the output of an existing analyzer for Inuktitut, in the absence of a two-way finite state transducer which would normally provide this functionality. We make use of a sequence to sequence neural network which “translates” underlying Inuktitut morpheme sequences into surface character sequences. The neural network uses only the previous and the following morphemes as context. We report a morpheme accuracy of approximately 86%. We are able to increase this accuracy slightly by passing deep morphemes directly to output for unknown morphemes. We do not see significant improvement when increasing training data set size, and postulate possible causes for this.

scholarly journals Real-Time Automated Classification of Sky Conditions Using Deep Learning and Edge Computing

2021 ◽  
Vol 13 (19) ◽  
pp. 3859
Author(s):  
Joby M. Prince Czarnecki ◽  
Sathishkumar Samiappan ◽  
Meilun Zhou ◽  
Cary Daniel McCraine ◽  
Louis L. Wasson
Keyword(s):  
Neural Network ◽  
Deep Learning ◽  
Image Quality ◽  
Convolutional Neural Network ◽  
Precision Agriculture ◽  
Edge Computing ◽  
Training Data ◽  
Learning Approaches ◽  
Sky Conditions

The radiometric quality of remotely sensed imagery is crucial for precision agriculture applications because estimations of plant health rely on the underlying quality. Sky conditions, and specifically shadowing from clouds, are critical determinants in the quality of images that can be obtained from low-altitude sensing platforms. In this work, we first compare common deep learning approaches to classify sky conditions with regard to cloud shadows in agricultural fields using a visible spectrum camera. We then develop an artificial-intelligence-based edge computing system to fully automate the classification process. Training data consisting of 100 oblique angle images of the sky were provided to a convolutional neural network and two deep residual neural networks (ResNet18 and ResNet34) to facilitate learning two classes, namely (1) good image quality expected, and (2) degraded image quality expected. The expectation of quality stemmed from the sky condition (i.e., density, coverage, and thickness of clouds) present at the time of the image capture. These networks were tested using a set of 13,000 images. Our results demonstrated that ResNet18 and ResNet34 classifiers produced better classification accuracy when compared to a convolutional neural network classifier. The best overall accuracy was obtained by ResNet34, which was 92% accurate, with a Kappa statistic of 0.77. These results demonstrate a low-cost solution to quality control for future autonomous farming systems that will operate without human intervention and supervision.

Analysis of Fin-Tube Evaporator Performance With Limited Experimental Data Using Artificial Neural Networks

2000 ◽  
Author(s):  
Arturo Pacheco-Vega ◽  
Mihir Sen ◽  
Rodney L. McClain
Keyword(s):  
Neural Network ◽  
Heat Rate ◽  
Network Models ◽  
Activation Function ◽  
Operating Conditions ◽  
Training Data ◽  
Neural Network Models ◽  
The Neural Network ◽  
Artificial Neural ◽  
Fin Tube

Abstract In the current study we consider the problem of accuracy in heat rate estimations from artificial neural network models of heat exchangers used for refrigeration applications. The network configuration is of the feedforward type with a sigmoid activation function and a backpropagation algorithm. Limited experimental measurements from a manufacturer are used to show the capability of the neural network technique in modeling the heat transfer in these systems. Results from this exercise show that a well-trained network correlates the data with errors of the same order as the uncertainty of the measurements. It is also shown that the number and distribution of the training data are linked to the performance of the network when estimating the heat rates under different operating conditions, and that networks trained from few tests may give large errors. A methodology based on the cross-validation technique is presented to find regions where not enough data are available to construct a reliable neural network. The results from three tests show that the proposed methodology gives an upper bound of the estimated error in the heat rates.

Sign in / Sign up

Export Citation Format

Share Document