scholarly journals ENHANCEMENT OF THE SOLUBILITY AND THE DISSOLUTION RATE OF CANDESARTAN CILEXETIL USING MICROSPONGE TECHNOLOGY

2018 ◽  
Vol 11 (9) ◽  
pp. 385 ◽  
Author(s):  
Shaimaa Nazar Abd Alhammid
Keyword(s):  
Particle Size ◽  
Dissolution Rate ◽  
Candesartan Cilexetil ◽  
Water Soluble ◽  
Production Yield ◽  
Diffusion Method ◽  
Scanning Calorimetry ◽  
Ftir Study ◽  
Loading Efficiency ◽  
Physical Mixtures

Objective: The aim of the present study is to enhance the dissolution rate of candesartan cilexetil (CC) using microsponges. Candesartan is therapeutically a potent antihypertensive agent, but it suffers a major drawback of poor oral bioavailability, which is estimated to be 15% due to its low solubility in the gastrointestinal fluids and hepatic first-pass metabolism.Methods: Eudragit-based microsponges were prepared by quasi-emulsion solvent diffusion method using different drug–polymer ratios (1:1 to 1:6), stirring speeds (250–750 rpm), and emulsifier concentrations (polyvinyl alcohol) (0.05%–0.083% w/v). Differential scanning calorimetry (DSC) and Fourier transform infrared spectroscopy (FTIR) study for CC, physical mixtures of drug–polymer, and selected formula were investigated to estimate compatibility of CC with other used ingredients. All formulations were evaluated for particle size, production yield, and loading efficiency. The in vitro drug release study of optimized formulation was performed in phosphate buffer pH 6.8.Results: The obtained results indicated that formula F3 which contains eudragit RS100 at drug:polymer ratio (6:1) was showed the smallest particle size with higher production yield and loading efficiency. DSC and FTIR study of the physical mixtures of drug and polymer revealed no drug–polymer interaction. The results clearly confirm that the percentage of CC released at 30 min from F3, CC powder, and self-made tablet was 54%, 20.325, and 38.9%, respectively.Conclusion: Microsponges technique was considered as a promising system to enhance the solubility and dissolution rate of poor-water soluble CC.

scholarly journals Formulation and in vitro Evaluation of Spherical Crystal Agglomerates of Ebastine by Quasi Emulsion Solvent Diffusion Method

2018 ◽  
pp. 77-92
Author(s):  
Marwah Mohammed Hareeja ◽  
Eman B.H.Al-Khedairy
Keyword(s):  
Polyethylene Glycol ◽  
Dissolution Rate ◽  
Water Soluble ◽  
Crystal Habit ◽  
Diffusion Method ◽  
Scanning Calorimetry ◽  
Solvent Diffusion ◽  
Peg 4000 ◽  
Spherical Crystal

Ebastine (EBS) is a poorly water-soluble antihistaminic drug; it belongs to the class II group according to the biopharmaceutical classification system (BCS). The aim of the present work was to enhance the solubility, dissolution rate and micromeritic properties of the drug, by formulating it as spherical crystal agglomerates by Quasi Emulsion Solvent Diffusion (QESD) method. Spherical crystal agglomerates (SCAs) were prepared in presence of three solvents dichloromethane (DCM), water and chloroform as a good solvent, poor solvent and bridging solvent respectively.  Agglomeration of EBS involved the use of some hydrophilic polymers like polyethylene glycol 4000 (PEG 4000), polyvinyl pyrrolidine K30 (PVP K30), D-?-tocopheryl polyethylene glycol 1000 succinate (TPGS) and ?. cyclodextrin. The pure drug (EBS) and its agglomerates with and without polymers were characterized for their drug content, percentage yield, solubility, in vitro drug release study and micromeritic property as well as by optical microscope, Scanning Electron Microscopy (SEM), FTIR spectroscopic studies, Differential Scanning Calorimetry (DSC) and X-ray Diffraction (XRD). The results of this work showed that there was a   marketed enhancement in the solubility with improvement in dissolution rate, physiochemical properties, decrease in crystallinity and alteration in the crystal habit of the drug especially in presence of polymers. The best results were obtained with formula prepared by the combination of PEG 4000 and ?. cyclodextrin in the agglomeration process of (EBS).

Enhancement of Solubility and Dissolution Rate of Poorly Water Soluble Drug using Cosolvency and Solid Dispersion Techniques

1970 ◽  
Vol 1 (4) ◽  
pp. 349-356
Author(s):  
Meka Lingam ◽  
Vobalaboina Venkateswarlu
Keyword(s):  
Dissolution Rate ◽  
Solid Dispersions ◽  
Physicochemical Characterization ◽  
Aqueous Solubility ◽  
Water Soluble ◽  
Scanning Calorimetry ◽  
Peg 400 ◽  
Water Soluble Drug ◽  
Poorly Water Soluble ◽  
Poorly Water Soluble Drug

The low aqueous solubility of celecoxib (CB) and thus its low bioavailability is a problem.    Thus, it is suggested to improve the solubility using cosolvency and solid dispersions techniques. Pure CB has solubility of 6.26±0.23µg/ml in water but increased solubility of CB was observed with increasing concentration of cosolvents like PEG 400, ethanol and propylene glycol. Highest solubility (791.06±15.57mg/ml) was observed with cosolvency technique containing the mixture of composition 10:80:10%v/v of water: PEG 400: ethanol. SDs with different polymers like PVP, PEG were prepared and subjected to physicochemical characterization using Fourier-transform infrared (FTIR) spectroscopy, X-ray diffractometry (XRD), differential scanning calorimetry (DSC), solubility and dissolution studies. These studies reveals that CB exists mainly in amorphous form in prepared solid dispersions of PVP, PEG4000 and PEG6000 further it can also be confirmed by solubility and dissolution rate studies. Solid dispersions of PV5 and PV9 have shown highest saturation solubility and dissolution rate

Formulation and Evaluation of Benidipine Nanosuspension

2021 ◽  
pp. 4111-4116
Author(s):  
Sejal Patel ◽  
Anita P. Patel
Keyword(s):  
Particle Size ◽  
Water Solubility ◽  
Polymer Concentration ◽  
Oral Route ◽  
Water Soluble ◽  
In Vitro Dissolution ◽  
Scanning Calorimetry ◽  
23 Factorial Design ◽  
Selection Of

In the interest of administration of dosage form oral route is most desirable and preferred method. After oral administration to get maximum therapeutic effect, major challenge is their water solubility. Water insoluble drug indicate insufficient bioavailability as well dissolution resulting in fluctuating plasma level. Benidipine (BND) is poorly water soluble antihypertensive drug has lower bioavailability. To improve bioavailability of Benidipine HCL, BND nanosuspension was formulated using media milling technique. HPMC E5 was used to stabilize nanosuspension. The effect of different important process parameters e.g. selection of polymer concentration X1(1.25 mg), stirring time X2 (800 rpm), selection of zirconium beads size X3 (0.4mm) were investigated by 23 factorial design to accomplish desired particle size and saturation solubility. The optimized batch had 408 nm particle size Y1, and showed in-vitro dissolution Y2 95±0.26 % in 30 mins and Zeta potential was -19.6. Differential scanning calorimetry (DSC) and FT-IR analysis was done to confirm there was no interaction between drug and polymer.

scholarly journals Enhancement of solubility and dissolution rate of poorly water soluble raloxifene using microwave induced fusion method

2013 ◽  
Vol 49 (3) ◽  
pp. 571-578 ◽  
Author(s):  
Payal Hasmukhlal Patil ◽  
Veena Sailendra Belgamwar ◽  
Pratibha Ramratan Patil ◽  
Sanjay Javerilal Surana
Keyword(s):  
Dissolution Rate ◽  
Hydroxypropyl Methylcellulose ◽  
Microwave Treatment ◽  
Water Soluble ◽  
Fusion Method ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
Wetting Properties ◽  
Poorly Soluble ◽  
Poorly Water Soluble

The objective of the present work was to enhance the solubility and dissolution rate of the drug raloxifene HCl (RLX), which is poorly soluble in water. The solubility of RLX was observed to increase with increasing concentration of hydroxypropyl methylcellulose (HPMC E5 LV). The optimized ratio for preparing a solid dispersion (SD) of RLX with HPMC E5 LV using the microwave-induced fusion method was 1:5 w/w. Microwave energy was used to prepare SDs. HPMC E5 LV was used as a hydrophilic carrier to enhance the solubility and dissolution rate of RLX. After microwave treatment, the drug and hydrophilic polymer are fused together, and the drug is converted from the crystalline form into an amorphous form. This was confirmed through scanning electron microscopy (SEM), differential scanning calorimetry (DSC) and powder X-ray diffraction (PXRD) studies. These results suggested that the microwave method is a simple and efficient method of preparing SDs. The solubility and dissolution rate of the SDs were increased significantly compared with pure RLX due to the surfactant and wetting properties of HPMC E5 LV and the formation of molecular dispersions of the drug in HPMC E5 LV. It was concluded that the solubility and dissolution rate of RLX are increased significantly when an SD of the drug is prepared using the microwave-induced fusion method.

scholarly journals FORMULATION AND CHARACTERIZATION OF GASTRORETENTIVE FLOATING MICROBALLOONS OF POORLY WATER-SOLUBLE DRUG DIACEREIN

2021 ◽  
Vol 15 (5) ◽  
pp. 8-12
Author(s):  
Kajal Tomer ◽  
Dilip Kumar Gupta
Keyword(s):  
Particle Size ◽  
Entrapment Efficiency ◽  
Water Soluble ◽  
In Vitro Dissolution ◽  
Diffusion Method ◽  
Acrylic Polymer ◽  
Water Soluble Drug ◽  
Technological Advances ◽  
S 100

The drug can be released in a controlled manner using a gastro retentive dosage type. The main focus on the novel technological advances in the floating drug delivery method for gastric retention. The preparation of diacerein micro balloon is done by solvent diffusion method, using acrylic polymer like Eudragit S 100 and HPMC K4 M. The various evaluation of the prepared floating microsphere like its % yield, drug entrapment efficiency, particle size in-vitro dissolution, buoyancy, was studied. The floating microsphere was found to be spherical and range from 85 μm - 192 μm. Whereas the buoyancy in gastric mucosa between the range 30.5% -49.5%. The % yield and % entrapment efficiency were found under the range 61% - 82% and 45.1–84.1% respectively. The microsphere showed favorable in-vitro dissolution 76.8 to 94.45. The optimized formulation was found based on evaluation of floating micro-balloons, Formulation (M3E3) showed the best result as particle size 192 μm, DDE 84.1%, in vitro drug release 94.5%, and in vitro buoyancy 49.5%. all the formulations showed controlled release up to 24 hours.

Fusion as an Approach to Enhance Dissolution Rate of a Poorly Water-Soluble Drug (Curcurmin)

2011 ◽  
Vol 393-395 ◽  
pp. 119-122
Author(s):  
Dong Hua Wan ◽  
Fen Lin ◽  
Qu Xiang Liao
Keyword(s):  
Dissolution Rate ◽  
Drug Loading ◽  
Solid Dispersions ◽  
Gastric Fluid ◽  
Molecular State ◽  
Water Soluble ◽  
Drug Dissolution ◽  
Simulated Gastric Fluid ◽  
Scanning Calorimetry ◽  
Rate Improvement

It’s well known that curcumin is practically insoluble in water. Therefore, to improve the drug dissolution rate, fusion approach was employed to prepare curcumin solid dispersions (SDs) in the carrier Pluronic F68 with three different drug loads. The dissolution rate of curcumin from the SDs was measured at simulated gastric fluid. The concentration of the dissolved drug in the medium was determined by HPLC. The dissolution rates of the formulations were dependent on the drug loading in SDs. 92.2% CUR was dissolved in 10 min from the SDs with 8.97% drug load, whereas the amounts of drug released were 65.8% and 84.2% within 120 min from the SDs with 18.9% and 29.0% drug loads, respectively. The Fourier transform infrared spectra indicated hydrogen bond between the drug and carrier. Furthermore, their physicochemical properties were well investigated using differential scanning calorimetry and X-ray diffraction. In the dispersions containing 8.97% CUR, the drug was in the molecular state. At a composition of approximately 18.9%, CUR was dispersed as micro-fine crystals. These interesting results indicate that the physical states of the drug in the carrier, which are governed by the drug loading, can affect the dissolution rate improvement.

scholarly journals DEVELOPMENT OF RITONAVIR LOADED NANOPARTICLES: IN VITRO AND IN VIVO CHARACTERIZATION

2018 ◽  
Vol 11 (3) ◽  
pp. 284
Author(s):  
Pravin S Patil ◽  
Shashikant C Dhawale
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Dissolution Rate ◽  
Drug Carrier ◽  
Entrapment Efficiency ◽  
Significant Rise ◽  
Scanning Calorimetry ◽  
In Vitro Drug Release

 Objective: The purpose of the present investigation was to develop a nanosuspension to improve dissolution rate and oral bioavailability of ritonavir.Methods: Extended-release ritonavir loaded nanoparticles were prepared using the polymeric system by nanoprecipitation technique. Further, the effect of Eudragit RL100 (polymeric matrix) and polyvinyl alcohol (surfactant) was investigated on particle size and distribution, drug content, entrapment efficiency, and in vitro drug release from nanosuspension where a strong influence of polymeric contents was observed. Drug-excipient compatibility and amorphous nature of drug in prepared nanoparticles were confirmed by Fourier transform infrared spectroscopy, differential scanning calorimetry, and powder X-ray diffraction studies, respectively.Results: Hydrophobic portions of Eudragit RL100 could result in enhanced encapsulation efficiency. However, increase in polymer and surfactant contents lead to enlarged particle size proportionately as confirmed by transmission electron microscopy. Nanosuspension showed a significant rise in dissolution rate with complete in vitro drug release as well as higher bioavailability in rats compared to the pure drug.Conclusion: The nanoprecipitation technique used in present research could be further explored for the development of different antiretroviral drug carrier therapeutics.

scholarly journals Dissolution rate and bioavailability enhancement of co-ground mixtures of paliperidone, with different hydrophilic carriers

2013 ◽  
Vol 2 (3) ◽  
pp. 70-77 ◽  
Author(s):  
Anuja Pandey ◽  
Bhabagrahi Rath ◽  
Anil Kumar Dwivedi
Keyword(s):  
Particle Size ◽  
Dissolution Rate ◽  
Methyl Cellulose ◽  
Pharmaceutical Journal ◽  
Water Soluble ◽  
Vinyl Pyrrolidone ◽  
Particle Size Reduction ◽  
Bioavailability Enhancement ◽  
Ground Mixture ◽  
Crystalline Nature

Co-ground mixtures of poorly water soluble drug Paliperidone (PAL) with different hydrophilic carriers [Polyvinylpyrrolidine (Plasdone K-25 and Plasdone S-630), Hydroxypropyl methyl cellulose (HPMC), Hydroxypropylcellulose (HPC) and Sodium alginate were prepared to improve the dissolution rate of PAL. Co-grinding with PVP, especially with PVP- S630 (Vinyl pyrrolidone/ vinyl acetate co-polymer), was more effective in reduction of particle size than milling of drug alone. DSC studies indicated that crystalline nature of drug was reduced after co-grinding with PVP grades as compared to their corresponding physical mixtures. The hydrophilic carriers other than PVP did not reduce the crystalline nature of the drug significantly. X-ray diffraction (XRD) was carried out for selected batches to confirm DSC results. Significant enhancement in dissolution rate as well as extent was observed with co-ground mixtures of drug and PVP. Among all the prepared batches in this study, co-ground mixture of PAL and Plasdone S-630 in 1:1 ratio showed best results in terms of extent of dissolution as well as dissolution rate in water. This effect was not only due to particle size reduction, but also loss of crystalline nature of the drug during co-grinding. PVP was found to be a better carrier among the different hydrophilic carriers used in the study for improving the dissolution characteristics of PAL. The extent of the mean plasma exposures of PAL was 7-fold higher in animals treated with co-ground mixture of PAL, Plasdone S630 (1:1) compared to animals treated with Pure PAL.DOI: http://dx.doi.org/10.3329/icpj.v2i3.13632 International Current Pharmaceutical Journal, February 2013, 2(3): 70-77 

scholarly journals Development and Characterization of Glimepiride Novel Solid Nanodispersion for Improving Its Oral Bioavailability

2020 ◽  
Vol 88 (4) ◽  
pp. 52
Author(s):  
Mona Qushawy ◽  
Ali Nasr ◽  
Shady Swidan ◽  
Yasmin Mortagi
Keyword(s):  
Solid Dispersion ◽  
Drug Carrier ◽  
In Vitro Release ◽  
Water Soluble ◽  
Production Yield ◽  
Scanning Calorimetry ◽  
Differential Scanning Calorimetry Study ◽  
Drug Content ◽  
Vitro Release

Glimepiride is an antidiabetic drug which is one of the third generation sulfonylureas. It belongs to class II, according to the BCS (Biopharmaceutical Classification System), which is characterized by low solubility and high permeability. The aim of this work was to formulate glimepiride as solid dispersion using water-soluble carriers to enhance its aqueous solubility and thus enhance its bioavailability. Nine formulations of glimepiride solid dispersion were prepared by a solvent evaporation technique using three different carriers (mannitol, polyethylene glycol 6000, and β-cyclodextrin) with three different drug carrier ratio (1:1, 1:3, and 1:6). Formulation variables were optimized using 32 full factorial design. The prepared formulations were evaluated for production yield, drug content, micromeritic properties, thermal analysis, in-vitro release, and in-vivo hypoglycemic effect. All prepared formulations showed high production yield ranged from 98.4 ± 2.8 to 99.8 ± 2.2% and high drug content in the range of 97.2 ± 3.2 to 99.6 ± 2.1%. The micromeritic properties revealed that all prepared glimepiride formulations showed good flowability. The differential scanning calorimetry study revealed the presence of the drug in the more soluble amorphous form. In accordance with the results of in vitro release study, it was found that the solubility of glimepiride was increased by increasing the drug carrier ratio, compared with the pure form of the drug. It was found that F9 showed a high and rapid reduction in blood glucose levels in diabetic rats, which indicated the success of a solid dispersion technique in improving the solubility and hence the bioavailability of glimepiride.

scholarly journals Preparation and evaluation of azithromycin binary solid dispersions using various polyethylene glycols for the improvement of the drug solubility and dissolution rate

2016 ◽  
Vol 52 (1) ◽  
pp. 1-13 ◽  
Author(s):  
Ehsan Adeli
Keyword(s):  
Dissolution Rate ◽  
Solid Dispersion ◽  
Solid Dispersions ◽  
Water Soluble ◽  
Polyethylene Glycols ◽  
X Ray Diffraction ◽  
Drug Release Profile ◽  
Scanning Calorimetry ◽  
Peg 4000 ◽  
Poorly Soluble

ABSTRACT Azithromycin is a water-insoluble drug, with a very low bioavailability. In order to increase the solubility and dissolution rate, and consequently increase the bioavailability of poorly-soluble drugs (such as azithromycin), various techniques can be applied. One of such techniques is "solid dispersion". This technique is frequently used to improve the dissolution rate of poorly water-soluble compounds. Owing to its low solubility and dissolution rate, azithromycin does not have a suitable bioavailability. Therefore, the main purpose of this investigation was to increase the solubility and dissolution rate of azithromycin by preparing its solid dispersion, using different Polyethylene glycols (PEG). Preparations of solid dispersions and physical mixtures of azithromycin were made using PEG 4000, 6000, 8000, 12000 and 20000 in various ratios, based on the solvent evaporation method. From the studied drug release profile, it was discovered that the dissolution rate of the physical mixture, as the well as the solid dispersions, were higher than those of the drug alone. There was no chemical incompatibility between the drug and polymer from the observed Infrared (IR) spectra. Drug-polymer interactions were also investigated using Differential Scanning Calorimetry (DSC), Powder X-Ray Diffraction (PXRD) and Scanning Election Microscopy (SEM). In conclusion, the dissolution rate and solubility of azithromycin were found to improve significantly, using hydrophilic carriers, especially PEG 6000.

Sign in / Sign up

Export Citation Format

Share Document