scholarly journals FORMULATION AND EVALUATION OF FUROSEMIDE LIQUISOLID COMPACT

2017 ◽  
Vol 9 (6) ◽  
pp. 39
Author(s):  
Zainab E. Jassim
Keyword(s):  
Dissolution Rate ◽  
Content Uniformity ◽  
Drug Release Profile ◽  
Scanning Calorimetry ◽  
Polyethylene Glycol 400 ◽  
Coating Materials ◽  
Disintegration Time ◽  
Weight Variation ◽  
R Ratio

Objective: The purpose of this study was to enhance the dissolution pattern of the practically water-insoluble diuretic drug, furosemide through its formulation into liquisolid tablets.Methods: A mathematical model was used to formulate four liquisolid powder systems using polyethylene glycol 400 as a non-volatile water miscible liquid vehicle. The liquid loading factors of the vehicle were used to calculate the optimum quantities of carrier (Avicel PH 102) and coating materials (Aerosil 200) needed to prepare acceptably flowing and compactible powder mixtures and (R) ratio used was 25. The liquisolid tablets were evaluated for weight variation, percent friability, hardness, content uniformity, disintegration time and in vitro drug release profile. Drug and the prepared systems were characterized by fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC) and powder x-ray diffraction (PXRD) studies.Results: The enhanced dissolution rate due to the increased wetting properties and the large available surface areas for dissolution were obtained in case of the liquisolid tablets. The selected optimal formulation (F2) of 50% drug concentration released 90% of its content during the first 10 min compared to 65% of DCT. FTIR studies revealed that there was no interaction between drug and polymers. DSC and PXRD indicated conversion of crystalline to amorphous form of furosemide. Conclusion: The dissolution rate of furosemide can be enhanced to a great extent by liquisolid technique.

scholarly journals Formulation Development and Characterization of Meclizine Hydrochloride Sublimated Fast Dissolving Tablets

2014 ◽  
Vol 2014 ◽  
pp. 1-8
Author(s):  
Sateesh Kumar Vemula ◽  
Mohan Vangala
Keyword(s):  
Drug Release ◽  
Dissolution Rate ◽  
Formulation Development ◽  
Scanning Calorimetry ◽  
Disintegration Time ◽  
Weight Variation ◽  
Sublimation Method ◽  
Dissolution Efficiency ◽  
Spectroscopy Studies

The intention of present research is to formulate and develop the meclizine hydrochloride fast dissolving tablets using sublimation method to enhance the dissolution rate. In this study an attempt was made to fasten the drug release from the oral tablets by incorporating the superdisintegrants and camphor as sublimating agent. The prepared fast dissolving tablets were subjected to precompression properties and characterized for hardness, weight variation, friability, wetting time, water absorption ratio, and disintegration time. From in vitro release studies, the formulation F9 exhibited fast release profile of about 98.61% in 30 min, and disintegration time 47 sec when compared with other formulations. The percent drug release in 30 min (Q30) and initial dissolution rate for formulation F9 was 98.61 ± 0.25%, 3.29%/min. These were very much higher compared to marketed tablets (65.43 ± 0.57%, 2.18%/min). The dissolution efficiency was found to be 63.37 and it is increased by 1.4-fold with F9 FDT tablets compared to marketed tablets. Differential scanning calorimetry and Fourier transform infrared spectroscopy studies revealed that there was no possibility of interactions. Thus the development of meclizine hydrochloride fast dissolving tablets by sublimation method is a suitable approach to improve the dissolution rate.

scholarly journals Formulation and Evaluation of Clopidogrel Bisulfate Liquisolid Compact

2018 ◽  
pp. 135-149
Author(s):  
Amina Moustafa Mohammed ◽  
Entidhar Jasim Mohammed
Keyword(s):  
Dissolution Rate ◽  
Vascular Diseases ◽  
Tween 80 ◽  
Content Uniformity ◽  
Disintegration Time ◽  
Clopidogrel Bisulfate ◽  
Weight Variation ◽  
Poorly Soluble ◽  
Low Solubility

Liquisolid compact is the most promising technique for increasing dissolution rate and bioavailability of poorly soluble drugs.Clopidogrel bisulfate is an oral antiplatelets used for treatment and prophylaxis of cardiovacular and peripheral vascular diseases related to platelets aggreagation.Clopidogrel has low solubility at high pH media of intestine and low bioavailability of a bout 50% after oral doses.The purpose of this work was to enhance dissolution pattern of clopidogrel through its formulation into liquisolid tablets.A mathematical model was used to calculate the optimum quantities of tween 80 , carrier (Avicel PH 102) and coating material (Aerosil 200) needed to prepare acceptably flowing and compactible powder mixtures.The liquisolid tablets were evaluated for hardness, percent friability, weight variation, content uniformity , disintegration time and in vitro drug release profile.DSC , FTIR , XRD and SEM were used for assessment of physicochemical properties of drug and compatibility with excipients in the liquisolid compacts.The selected formulation (F2) released 92.2% of its content during first 10 min. compared to 13.6% of directly compressed tablet and 24.2% of marketed tablet. In conclusion the dissolution rate and bioavailability of clopidogrel can be enhanced to a great extent by liquisolid technique.

The Effect of Superdisintegrants on the Dissolution of Promethazine. HCl Fast Dissolving Tablets

2010 ◽  
Vol 3 (1) ◽  
pp. 867-871
Author(s):  
Ganesh kumar Gudas ◽  
Manasa B ◽  
Senthil Kumaran K ◽  
Rajesham V V ◽  
Kiran Kumar S ◽  
...  
Keyword(s):  
Dissolution Rate ◽  
Angle Of Repose ◽  
Content Uniformity ◽  
Disintegration Time ◽  
Enhanced Dissolution ◽  
Weight Variation ◽  
Compressibility Index ◽  
Chemoreceptor Trigger Zone ◽  
Trigger Zone ◽  
Standard Limit

Promethazine.HCl is a potent anti-emetic. The central antimuscarinic actions of antihistamines are probably responsible for their anti-emetic effects. Promethazine is also believed to inhibit the medullary chemoreceptor trigger zone, and antagonize apomorphine -induced vomiting. Fast dissolving tablets of Promethazine.HCl were prepared using five superdisintegrants viz; sodium starch glycolate, crospovidone, croscarmellose, L-HPC and pregelatinised starch. The precompression blend was tested for angle of repose, bulk density, tapped density, compressibility index and Hausner’s ratio. The tablets were evaluated for weight variation, hardness, friability, disintegration time (1 min), dissolution rate, content uniformity, and were found to be within standard limit. It was concluded that the fast dissolving tablets with proper hardness, rapidly disintegrating with enhanced dissolution can be made using selected superdisintegrants. Among the different formulations of Promethazine.HCl was prepared and studied and the formulation S2 containing crospovidone, mannitol and microcrystalline cellulose combination was found to be the fast dissolving formulation. In the present study an attempt has been made to prepare fast dissolving tablets of Promethazine.HCl, by using different superdisintegrants with enhanced disintegration and dissolution rate. 

scholarly journals DESIGN, OPTIMIZATION AND EVALUATION OF CETRIZINE DIHYDROCHLORIDE FAST DISSOLVING FILMS EMPLOYING STARCH TARTRATE–A NOVEL SUPERDISINTEGRANT

2019 ◽  
pp. 75-86
Author(s):  
R. SANTOSH KUMAR ◽  
ANNU KUMARI ◽  
B. KUSUMA LATHA ◽  
PRUDHVI RAJ
Keyword(s):  
Tensile Strength ◽  
Drug Dissolution ◽  
In Vitro Dissolution ◽  
Content Uniformity ◽  
Scanning Calorimetry ◽  
Disintegration Time ◽  
Folding Endurance ◽  
Contour Plots ◽  
The Individual

Objective: The aim of the current research is optimization, preparation and evaluation of starch tartrate (novel super disintegrant) and preparation of fast dissolving oral films of cetirizine dihydrochloride by employing starch tartrate. Methods: To check the drug excipient compatibility studies of the selected drug (Cetrizine dihydrochloride) and the prepared excipient i. e starch tartrate, different studies like FTIR (Fourier-transform infrared spectroscopy), DSC (Differential scanning calorimetry) and thin-layer chromatography (TLC) were carried out to find out whether there is any interaction between cetirizine dihydrochloride and starch tartrate. The solvent casting method was used for the preparation of fast dissolving films. The prepared films were then evaluated for thickness, folding endurance, content uniformity, tensile strength, percent elongation, in vitro disintegration time and in-vitro dissolution studies. Response surface plots and contour plots were also plotted to know the individual and combined effect of starch tartrate (A), croscarmellose sodium (B) and crospovidone (C) on disintegration time and drug dissolution efficiency in 10 min (dependent variables). Results: Films of all the formulations are of good quality, smooth and elegant by appearance. Drug content (100±5%), thickness (0.059 mm to 0.061 mm), the weight of films varies from 51.33 to 58.06 mg, folding endurance (52 to 67 times), tensile strength (10.25 to 12.08 N/mm2). Fast dissolving films were found to disintegrate between 34 to 69 sec. Percent dissolved in 5 min were found to be more in F1 formulation which confirms that starch tartrate was effective at 1%. Conclusion: From the research conducted, it was proved that starch tartrate can be used in the formulation of fast dissolving films of cetirizine dihydrochloride. The disintegration time of the films was increased with increase in concentration of super disintegrant.

scholarly journals Dissolution Enhancement of Rosuvastatin Calcium by Liquisolid Compact Technique

2013 ◽  
Vol 2013 ◽  
pp. 1-9 ◽  
Author(s):  
V. J. Kapure ◽  
V. V. Pande ◽  
P. K. Deshmukh
Keyword(s):  
Drug Release ◽  
In Vitro Release ◽  
Water Soluble ◽  
Dissolution Enhancement ◽  
Content Uniformity ◽  
Scanning Calorimetry ◽  
Weight Variation ◽  
Liquisolid Compacts ◽  
Rosuvastatin Calcium

In present investigation liquisolid compact technique is investigated as a tool for enhanced dissolution of poorly water-soluble drug Rosuvastatin calcium (RVT). The model drug RVT, a HMG-Co A reductase inhibitor was formulated in form of directly compressed tablets and liquisolid compacts; and studied for in-vitro release characteristics at different dissolution conditions. In this technique, liquid medications of water insoluble drugs in non-volatile liquid vehicles can be converted into acceptably flowing and compressible powders. Formulated systems were assessed for precompression parameters like flow properties of liquisolid system, Fourior transform infra red spectra (FTIR) analysis, X-ray powder diffraction (XRPD), differential scanning calorimetry (DSC), and post compression parameters like content uniformity, weight variation, hardness and friability, disintegration test, wetting time, in vitro dissolution studies, effect of dissolution volume on drug release rate, and estimation of fraction of molecularly dispersed drug in liquid medication. As liquisolid compacts demonstrated significantly higher drug release rates, we lead to conclusion that it could be a promising strategy in improving the dissolution of poor water soluble drugs and formulating immediate release solid dosage forms.

scholarly journals FORMULATION AND EVALUATION OF FAST DISSOLVING ORAL FILM OF ANTI-ALLERGIC DRUG

2018 ◽  
Vol 6 (3) ◽  
pp. 5-16 ◽  
Author(s):  
ABRAHAM LINKU ◽  
JOSEPH SIJIMOL
Keyword(s):  
Ex Vivo ◽  
Methyl Cellulose ◽  
Moisture Loss ◽  
In Vitro Dissolution ◽  
Content Uniformity ◽  
Onset Of Action ◽  
Disintegration Time ◽  
Permeation Study ◽  
Weight Variation

The aim of present work was the development of fast dissolving oral film of Loratadine to overcome the limitations of current routes of administration, to provide immediate action and increase the patient compliance. To improve the bioavailability of the drug, fast dissolving oral film were formulated using different grades of Hydroxy Propyl Methyl Cellulose(HPMC) and various plasticizers like Polyethylene Glycol(PEG) 400, glycerol, Propylene glycol(PG) by solvent casting method. The formulated films were evaluated for film thickness, surface pH, folding endurance, weight variation, % moisture loss, exvivo permeation study, tensile strength, % elongation, drug content uniformity, in vitro dissolution studies,in vitro disintegration test and in vivo study. The optimized formulation (F9) containing HPMC E5 and glycerol showed minimum disintegration time (10.5 s), highest in vitrodissolution (92.5%) and satisfactory stability. Ex vivo permeation study of optimized formulation showed a drug release of 80.6% within 10 min. The milk induced leucocytosis inrat proved that fast dissolving oral films of Loratadine produced a faster onset of action compared to the conventional tablets. These findings suggest that fast dissolving oral film of Loratadine could be potentially useful for treatment of allergy where quick onset of action is required.

scholarly journals COMPARATIVE STUDY OF SEVEN BRANDS OF LEVOFLOXACIN 500 MG FILM-COATED TABLET MARKETED IN YEMEN

2021 ◽  
pp. 264-268
Author(s):  
GAMIL Q. OTHMAN ◽  
YASER M. AL-WORAFI ◽  
MOHAMMED M. BATTAH ◽  
ABDULSALAM M. HALBOUP ◽  
HASSAN M. HASSAN
Keyword(s):  
Quality Control ◽  
High Performance ◽  
Hardness Test ◽  
The United States ◽  
Content Uniformity ◽  
Disintegration Time ◽  
Optimum Range ◽  
Weight Variation ◽  
Coated Tablet

Objective: The objective of the current study was to evaluate the quality control parameters of seven brands of levofloxacin 500 mg film-coated tablet available in the Yemeni market. Methods: Physicochemical parameters assay was performed for seven brands of levofloxacin 500 mg film-coated tablet. Each brand was subjected to official and unofficial in vitro quality control tests, including weight variation, thickness, hardness, friability, disintegration, dissolution, and content uniformity assay by High-Performance Liquid Chromatography (HPLC). Results: Out of seven, six brands of levofloxacin 500 mg film-coated tablet passed official specified assay tests according to the United States Pharmacopeia (USP) specifications. They showed a similar profile of thickness ranged between±0.01 and 0.10%, friability ranged between 0.01% and 0.34%, disintegration time ranged between 3.00 and 15.00 min, dissolution percentage ranged between 90.650 and 103.05 and content uniformity ranged between 93.62 and 107.12%. Regarding weight variation and hardness, six brands passed the weight variation test and only three brands showed optimum range (10-20 kg) of hardness test. Only one brand failed to pass the weight variation test, and four brands failed to pass the optimum range (10-20 kg) of hardness. Conclusion: There are no remarkable differences between the seven brands regarding in vitro quality control tests of content uniformity, thickness, friability, disintegration, and dissolution. Even though four brands were above the optimum range of hardiness, they showed complete disintegration and dissolution within the acceptable limit. Regular assessment of marketed drugs is required to ensure bioequivalent to their innovators.

scholarly journals APPLICATION OF LIQUISOLID TECHNOLOGY TO ENHANCE THE DISSOLUTION OF CEFIXIME FROM ITS ORAL CAPSULES

2018 ◽  
Vol 10 (5) ◽  
pp. 214
Author(s):  
Zainab H. Mahdi ◽  
Nidhal K. Maraie ◽  
Zahraa Amer Al-juboori
Keyword(s):  
Oral Drug Delivery ◽  
Oral Route ◽  
Oral Drug ◽  
Content Uniformity ◽  
Disintegration Time ◽  
Promising Technology ◽  
Weight Variation ◽  
R Value ◽  
Optimum Formula

Objective: Oral drug delivery is the most desired route for drug administration for its well-known features. Therefore, many attempts were implemented to improve the poor solubility of many active ingredients in order to enhance their dissolution and absorption via the oral route. From these, the liquisolid system is a very promising technology for enhancing solubility and bioavailability of poorly soluble drugs.Methods: In this research, oral capsules of cefixime were prepared by liquisolid technique after mixing different concentrations of the drug with propylene glycol (non-volatile solvent), followed by their addition to different proportions of microcrystalline cellulose and aerosil i.e. different carrier: coating (R-value). The liquisolid capsules were evaluated for In vitro disintegration and dissolution in addition to content uniformity and weight variations. Furthermore, solubility studies, scanning electron microscope (SEM) were performed to the optimum formula. Finally, the release profile of the optimum formula was compared with the marketed cefixime capsules.Results: Liquisolid formula (F3) with 70% cefixime and R-value equals 10 was selected as the optimum formula having higher % release in 45 min (99.5%±0.53) compared to other formulas with faster release rate in the first 20 min than marketed capsules. It had an acceptable disintegration time (25 min±0.76), content uniformity (197.6±0.92) and weight variation (698.04±0.16). Results of solubility study, SEM assured enhancement in solubility and dispersibility of the drug.Conclusion: This research proved that liquisolid system is a promising technology in improving the solubility and dissolution of cefixime from its capsules and hence it may improve its absorption and oral bioavailability.

scholarly journals CINNARIZINE LIQUID SOLID COMPACTS: PREPARATION EVALUATION

2019 ◽  
Vol 11 (1) ◽  
pp. 150
Author(s):  
Sreenivas Patro Sisinthy ◽  
Shubbaneswarei Selladurai
Keyword(s):  
Angle Of Repose ◽  
In Vitro Dissolution ◽  
Dissolution Profile ◽  
Scanning Calorimetry ◽  
Disintegration Time ◽  
Dsc Studies ◽  
Weight Variation ◽  
Drug Concentrations ◽  
R Value

Objective: The objective of this research was to formulate cinnarizine tablets using the liquid-solid compact technique to enhance its solubility and dissolution rate.Methods: Cinnarizine liquid-solid compacts were formulated using propylene glycol as the non-volatile solvent, Neusilin US2 as the carrier material, Aerosil 200 as the coating material and croscarmellose sodium as the disintegrant. The interaction between drug and excipients were characterized by Fourier-transform infrared spectroscopy (FTIR) and differential scanning calorimetry (DSC) studies. Different batches of liquid, solid compacts were prepared by using varying carrier-coating excipient ratio and different concentration of liquid medication. Flow parameters such as bulk density, tapped density, Carr’s Index, Hausner’s Ratio as well as an angle of repose were used to test the flowability of the powder blend. The liquid-solid compacts were produced by direct compression method and were evaluated for tests such as weight variation, drug content, hardness, thickness, friability, wetting time, disintegration time as well as the in vitro dissolution studies.Results: The results of the preformulation studies of liquisolid compacts showed acceptable flow properties. The results of FTIR and DSC studies showed that there is no drug-excipient interactions. The different R values and concentrations were found to have a marked effect on the dissolution profile. Formulations with higher carrier: coating ratio (R-value) and lower drug concentrations displayed a better dissolution profile. The percentage of drug release of F3 with an R-value of 20 and a drug concentration of 10% was found to be 88.11% when compared to the conventional marketed tablet which released only 44.07% at the end of 2 h.Conclusion: From this research, it is inferred that liquid-solid technique is a promising and effective approach that can be used to enhance the dissolution rate of cinnarizine.

Design And Development Of Fast Disintegrating Tablet Of Felodipine By Vacuum Drying Technique

2010 ◽  
Vol 2 (2) ◽  
Author(s):  
N. G. Rao ◽  
Upendra Kulkarni ◽  
Hari Prassanna C. ◽  
Basawaraj Patil ◽  
Rabbani G.
Keyword(s):  
Dissolution Rate ◽  
Chemical Interaction ◽  
Ammonium Bicarbonate ◽  
In Vitro Dissolution ◽  
Vacuum Drying ◽  
Disintegration Time ◽  
Ftir Studies ◽  
Weight Variation ◽  
Fast Disintegrating Tablets

Felodipine which is used in the present study is a dihydropyridine derivative, that is chemically described as ethyl methyl-4-(2, 3-dichlorophenyl)-1,4-dihydro-2,6-dimethyl-3,5-pyridinedicarboxylate, widely accepted for its excellent antihypertensive and anti-anginal properties since it is calcium antagonist compound (calcium channel blocker). Felodipine is practically insoluble in water and its dissolution rate is limited by its physicochemical properties. In the present study fast disintegrating tablets of felodipine were prepared by adopting vacuum drying technique to study the effect of different subliming agents with various concentrations on disintegrating time. The powder blend was examined for the pre-compressional parameters. The prepared formulations were evaluated for post-compressional analysis for the parameters like hardness, friability, thickness, wetting time, water absorption ratio, weight variation, in-vitro disintegration time, in- vitro dispersion time, in-vitro dissolution study. Drug compatibility with excipients was checked by FTIR studies. The results obtained showed that quantity of ammonium bicarbonate, urea and menthol significantly affect the response variables (P> 0.05). No chemical interaction between drug and excipients was confirmed by FTIR studies. Stability studies carried out as per ICH guidelines for three months and results revealed that upon storage disintegration time of tablets decreased significantly (P> 0.05). The results concluded that fast disintegrating tablets of felodipine showing enhanced dissolution rate with increasing the concentrations of subliming agents. Among all the formulations A3 and M3 shows the improved dissolution rate which lead to improved bioavailability and effective therapy by using vacuum drying technique.

Sign in / Sign up

Export Citation Format

Share Document