scholarly journals IMPROVING SEED AND OIL YIELD OF SUNFLOWER (Helianthus annuus L.) BY USING DIFFERENT INTER AND INTRA ROW SPACE COMBINATIONS

2020 ◽  
pp. 147-153
Author(s):  
Ismail Demir
Keyword(s):  
Seed Weight ◽  
Plant Material ◽  
Unit Area ◽  
Oil Yield ◽  
Row Spacing ◽  
Plant Yield ◽  
Yield Parameters ◽  
Row Space ◽  
Thousand Seed Weight ◽  
Number Of Seeds

The aim of this study was to determine the appropriate inter and intra row spacing of sunflower irrigated during the critical growing stages to obtain the highest seed and oil yields. The experiment was carried out with three replications in the randomized blocks with split plots design in 2016 and 2017. Inter row spacings (45 and 70 cm) were placed on the main plots and intra row spacings (20, 25, 30, 35 and 40 cm) were placed on the subplots. Bosfora, oilseed hybrid sunflower variety was used as plant material. It has been determined that inter and intra row spaces had statistically significant effects on sunflower development and yield parameters. In general, as the distance between the inter and intra rows narrowed, plant height was increased, while the stem and table diameters, the number of seeds in the table, thousand seed weight, oil rate and per plant yield were decreased. And also seed and oil yield was increased, in contrast to per plant yield, due to the increase in plant number per unit area. Seed and oil yield with 45x25 cm inter and intra row spacings were 59.6% and 52.9% higher as compared to 70x40 cm spacing, respectively. The highest seed and oil yield was obtained from 45x25 cm inter and intra row space under irrigated conditions

scholarly journals MULTIVARIABLE ANALYSIS OF CHARACTERS AFFECTING YIELD IN CHICKPEA PLANTS

2020 ◽  
pp. 155-160
Author(s):  
Ufuk Karadavut ◽  
Omer Sozen
Keyword(s):  
Seed Weight ◽  
Unit Area ◽  
Multivariable Analysis ◽  
Oil Yield ◽  
Row Spacing ◽  
Plant Yield ◽  
Yield Parameters ◽  
Row Space ◽  
Thousand Seed Weight ◽  
Number Of Seeds

The aim of this study was to determine the appropriate inter and intra row spacing of sunflower irrigated during the critical growing stages to obtain the highest seed and oil yields. The experiment was carried out with three replications in the randomized blocks with split plots design in 2016 and 2017. Inter row spacings (45 and 70 cm) were placed on the main plots and intra row spacings (20, 25, 30, 35 and 40 cm) were placed on the subplots. Bosfora, oilseed hybrid sunflower variety was used as plant material. It has been determined that inter and intra row spaces had statistically significant effects on sunflower development and yield parameters. In general, as the distance between the inter and intra rows narrowed, plant height was increased, while the stem and table diameters, the number of seeds in the table, thousand seed weight, oil rate and per plant yield were decreased. And also seed and oil yield was increased, in contrast to per plant yield, due to the increase in plant number per unit area. Seed and oil yield with 45x25 cm inter and intra row spacings were 59.6% and 52.9% higher as compared to 70x40 cm spacing, respectively. The highest seed and oil yield was obtained from 45x25 cm inter and intra row space under irrigated conditions.

Dependence of seed maize yield on inter-row spacing and sowing density

2003 ◽  
Vol 51 (3) ◽  
pp. 333-338
Author(s):  
P. Jovin ◽  
L. Đukanović ◽  
Z. Jovanović ◽  
M. Vesković ◽  
J. Tošić
Keyword(s):  
Seed Weight ◽  
Unit Area ◽  
Maize Yield ◽  
Cold Test ◽  
Standard Test ◽  
Test Method ◽  
Row Spacing ◽  
Maize Hybrid ◽  
Female Component ◽  
Number Of Seeds

The seed maize hybrid ZP 677 was tested under irrigated conditions on the DPP Maglic estate in Backi Maglic during 2000 and 2001. Sowing the female component of the hybrid ZP 677 at an inter-row spacing of 70 cm resulted in both higher yield (4.55 t ha-1) and higher number of seeds per unit area (15,407,000) in comparison to sowing at an inter-row spacing of 35 cm, where the corresponding values were 4.39 t ha-1 and 14,667,000, respectively. At sowing densities of 71,425, 85,538 and 99,899 plants ha-1, yields of 4.46, 4.38 and 4.59 th ha-1 were recorded, while the number of seeds per unit area amounted to 14,670,000, 14,769,000 and 15,686,000, respectively. The 1000-seed weight decreased on average for all seed fractions at both inter-row spacings as the sowing density increased. Neither inter-row spacing nor sowing density affected the seed germination obtained with the standard test method, but germination in the cold test exhibited an insignificant increase with an increase in sowing density.

scholarly journals Estimation of heterosis for yield-related traits for single cross and three-way cross hybrids of oilseed rape (Brassica napus L.)

Euphytica ◽  
2019 ◽  
Vol 215 (10) ◽  
Author(s):  
Joanna Wolko ◽  
Agnieszka Dobrzycka ◽  
Jan Bocianowski ◽  
Iwona Bartkowiak-Broda
Keyword(s):  
Brassica Napus ◽  
Oilseed Rape ◽  
Seed Yield ◽  
Seed Weight ◽  
Single Cross ◽  
Positive Heterosis ◽  
Silique Length ◽  
Thousand Seed Weight ◽  
Number Of Seeds ◽  
Number Of Branches

Abstract Rapeseed breeding programs are focused mainly on improving plant potential and seed yield. One of the ways to improve seed yield in oilseed rape is heterosis, which is hybrid vigor that results in a greater biomass, increased seed yield, and faster development. The purpose of this study was to estimate yield-related trait heterosis for single cross and three-way cross hybrids of winter oilseed rape (Brassica napus L.). A population of 60 doubled-haploid (DH) lines and two generations of hybrids were evaluated in field trials to assess six yield-related traits: plant height, number of branches per plant, number of siliques per plant, silique length, number of seeds per silique, and thousand seed weight. Heterosis effects for each trait were estimated by a comparison of the particular hybrid with: (1) the trait mean over both parents—mid-parent heterosis and (2) to the value of better parent—best-parent heterosis. Traits with clear positive heterosis and traits with varied heterosis were observed in this study. For the first group, we include plant height, silique length, and the number of seeds per silique—a large number of hybrids expressed significant positive heterosis for these traits, independent from the year of observations and the type of hybrid. For the second group, with varied heterosis, we can include the number of branches and siliques per plant and thousand seed weight. For these traits, hybrids exhibited both positive and negative significant heterosis, without a clear pattern for the years and types of hybrids.

Crop density and seed production of creeping red fescue (Festuca rubra L. var. rubra). 2. Reproductive components and seed characteristics

1996 ◽  
Vol 76 (2) ◽  
pp. 299-306 ◽  
Author(s):  
N. A. Fairey ◽  
L. P. Lefkovitch
Keyword(s):  
Seed Yield ◽  
Seed Weight ◽  
Initial Density ◽  
First Year ◽  
Row Spacing ◽  
Festuca Rubra ◽  
Red Fescue ◽  
Crop Density ◽  
Seed Characteristics ◽  
Number Of Seeds

The natural growth habit of creeping red fescue (Festuca rubra L. var. rubra) involves a steady proliferation of tillers which eventually become too dense to form seedheads. The effects of the initial density (1.6, 3.1, 6.3, 12.5, 25, 50 and 100 plants m−2) and row spacing (20, 40 and 80 cm) on reproductive components and seed characteristics of red fescue were studied in a northerly environment for three production years (1991–1993) The weight proportion of cleaned to uncleaned seed decreased as density increased, from 82% at 1.6 plants m−2 to 60% at 100 plants m−2. The thousand-seed weight was 1.20–1.54 g (i.e., 830 000–650 000 seeds kg−1) and decreased as density increased. The specific seed weight was 16–25 kg hL−1; it differed among years and decreased as density increased. The germination capacity of the seed was unaffected by density but differed among years, averaging 87, 92 and 69% in the three consecutive production years. The seed yield per plant, the number of seedheads per plant, and the number of seeds per plant decreased exponentially as the density increased. The number of seeds per seedhead decreased as density increased in the first year but was less affected subsequently, except in the third year at 50 and 100 plants m−2 on 20-cm rows, when no seeds were matured. The seed yield was correlated closely with the number of seedheads per square metre, which increased with density in the first year but decreased as density increased in the two subsequent years. A relatively high density of well-spaced plants is required at establishment to optimize seedhead formation in the first crop but is detrimental to seedhead formation and seed yield subsequently. Key words: Red fescue; Festuca rubra var. rubra, population density, plant and row spacing, yield components, seed quality

Irrigation and Nitrogen Studies in s. 23 Ryegrass Grown for Seed: 1. Growth, Development, Seed Yield Components and Seed Yield

1977 ◽  
Vol 88 (3) ◽  
pp. 605-614 ◽  
Author(s):  
P. D. Hebblethwaite
Keyword(s):  
Seed Yield ◽  
Yield Components ◽  
Seed Weight ◽  
Dry Matter ◽  
Field Experiments ◽  
Unit Area ◽  
Yield Response ◽  
Seed Yield Components ◽  
Seed Yields ◽  
Number Of Seeds

SUMMARYThe effects of irrigation and nitrogen on S. 23 perennial ryegrass grown for seed were investigated in a series of field experiments from 1972 to 1974. Irrigation significantly increased seed yield by 16% in 1972 and 52% in 1974 but had no effect in the wet year of 1973. In 1972 maximum deficit reached 110 mm at the end of July and coincided with anthesis. Consequently the yield response was due to an increase in number of seeds per unit area and no other seed yield component was affected. In 1974 peak deficit also reached about 100 mm but started to build up rapidly very early in the season and had reached 80 mm by the time that the first ears emerged. Consequently the yield response was due to increases in number of fertile tillers, number of seeds per unit area and 1000-seed weight.Irrigation had no significant effect on number of florets or seeds, except in 1974 when percentage of florets which produced seed was increased by 2%.Irrigation had some effect on threshed straw yields, total dry matter, harvest index and total number of tillers but where this occurred the response was much smaller than that of seed yield which indicates that irrigation had greater effects on the reproductive development of the crop than on yield of dry matter and tillering patterns. Increasing the quantity of nitrogen from 0 to 80 kg/ha increased seed yields, all seed yield components except 1000-seed weight, threshed straw yields and total dry matter and number of tillers at most sampling dates. Increasing the quantity of nitrogen from 80 to 160 kg/ha had little further effect on the above components except in 1972 where seed yields were significantly decreased.In 1972 number of florets was increased and percentage of florets which produced seed decreased with increasing quantities of nitrogen.

scholarly journals The effect of herbicides on the yield structure elements and the productivity of oil flax

2021 ◽  
Vol 37 ◽  
pp. 00028
Author(s):  
Alexander S. Bushnev ◽  
Gennady I. Orekhov ◽  
Sergei P. Podlesny ◽  
Yulia V. Mamyrko
Keyword(s):  
Seed Weight ◽  
Oil Content ◽  
Oil Yield ◽  
Research Results ◽  
Bulk Weight ◽  
Leached Chernozem ◽  
Yield Structure ◽  
Manual Weeding ◽  
Western Ciscaucasia ◽  
Thousand Seed Weight

The article provides the research results concerning the effect of antidicotyledonous herbicide Sekator Turbo, OD (a.i. amidosulfuron + iodosulfuron-methyl-sodium + mefenpyr-diethyl) in a tank mixture with various graminicides Quickstep, FEM (a.i. clethodim + haloxyfop-P-methyl), Bagheera, EC (a.i. quizalofop-P-tefuryl), Fuzilad Forte, EC (a.i. fluazifop-P-butyl), Miura, EC (a.i. quizalofop-P-ethyl), and Zellek-super, EC (a.i. haloxyfop-P-methyl) on the yield structure elements and the productivity of lowlinolenic (Nilin) and linolenic (FLIZ) varieties of oil flax on leached chernozem of the Western Ciscaucasia. We have found that the treatment of sowings with herbicides did not have a significant effect on the yield structure elements (thousand-seed weight and bulk weight of seeds). The treatment of sowings of the variety Nilin with the composition of Sekator Turbo + Bagheera or Sekator Turbo + Miura, and the variety FLIZ with Sekator Turbo + Bagheera, Sekator Turbo + Quickstep, Sekator Turbo + Fuzilad Forte, Sekator Turbo + Miura contributes to the receiving of oil flax yield at the level of the control with manual weeding. Tank mixtures of Sekator Turbo + Bagheera, Sekator Turbo + Miura decreased the oil content of seeds of the variety Nilin by 0.5 %. The application of herbicides Sekator Turbo, OD (0.1 l/ha) + Bagheera, EC (1.5 l/ha) provided the highest oil yield of the variety Nilin – 0.34 t/ha, and of the variety FLIZ – 0.54 t/ha. The composition of Sekator Turbo + Zellek-super led to a significant decrease in the productivity and oil content of seeds of the variety FLIZ – by 0.15 t/ha and 0.6 %, respectively.

Thousand-seed weight determination in forest species by image analysis

2021 ◽  
Vol 43 ◽  
Author(s):  
Francival Cardoso Felix ◽  
Felipe Ligeski Mocelim ◽  
Salvador Barros Torres ◽  
Dagma Kratz ◽  
Richardson Ribeiro ◽  
...  
Keyword(s):  
Image Analysis ◽  
Execution Time ◽  
Traditional Method ◽  
Seed Weight ◽  
Forest Species ◽  
Analysis Techniques ◽  
Alternative Methodology ◽  
Image Analysis Techniques ◽  
Thousand Seed Weight ◽  
Number Of Seeds

Abstract: Thousand-seed weight (TSW) is used to calculate the sowing density, number of seeds present in a sample, and predict seed size. Our aim was to establish an alternative methodology for thousand-seed weight determination in forest species using image analysis techniques. The traditional methodology was compared with the alternative one, testing them on seeds from 16 forest species. The traditional method was performed by manually counting eight repetitions of 100 seeds, weighing of samples, and computation of thousand-seed weight. The alternative methodology was performed by counting seed samples captured by images and processing in ImageJ® software, followed by weighing a single sample, and computation. All steps were timed, and each methodology was repeated ten times per species. The TSW obtained by the alternative methodology was similar to that obtained by the traditional one, and the average execution time of the activities was reduced by 62%. The proposed thousand-seed weight determination by image analysis is an efficient and optimized alternative to the traditional method. Thousand-seed weight determination from image analysis reduces execution time for the seed analyst and forest seedling producer.

scholarly journals Can sulphur improve the nutrient uptake, partitioning, and seed yield of sesame?

2021 ◽  
Vol 14 (10) ◽  
Author(s):  
Muhammad Zeeshan Mehmood ◽  
Obaid Afzal ◽  
Mukhtar Ahmed ◽  
Ghulam Qadir ◽  
Ahmed M.S. Kheir ◽  
...  
Keyword(s):  
Nutrient Uptake ◽  
Seed Yield ◽  
Seed Weight ◽  
Dry Matter ◽  
Total Biomass ◽  
Dry Matter Accumulation ◽  
Physiological Maturity ◽  
Nitrogen Phosphorus ◽  
Thousand Seed Weight ◽  
Number Of Seeds

AbstractSulphur (S) is considered to improve the nutrient uptake of plants due to its synergistic relationship with other nutrients. This could ultimately enhance the seed yield of oilseed crops. However, there is limited quantitative information on nutrient uptake, distribution, and its associated impacts on seed yield of sesame under the S application. Thus, a two-year field study (2018 and 2019) was conducted to assess the impacts of different S treatments (S0 = Control, S20 = 20, S40 = 40, and S60 = 60 kg ha−1) on total dry matter production, nitrogen, phosphorus, potassium, S uptake and distribution at the mid-bloom stage and physiological maturity. Furthermore, treatment impacts were studied on the number of capsules per plant, number of seeds per capsule, thousand seed weight, and seed yield at physiological maturity in sesame. Compared to S0, over the years, treatment S40 significantly increased the total uptake of nitrogen, phosphorus, potassium, and S (by 13, 22, 11% and 16%, respectively) at physiological maturity, while their distribution by 13, 36, 14, and 24% (in leaves), 12, 15, 11, and 15% (in stems), 15, 42, 18, and 10% (in capsules), and 14, 22, 9, and 15% (in seeds), respectively. Enhanced nutrient uptake and distribution in treatment S40 improved the total biomass accumulation (by 28%) and distribution in leaves (by 34%), stems (by 27%), capsules (by 26%), and seeds (by 28%), at physiological maturity, as compared to S0. Treatment S40 increased the number of capsules per plant (by 13%), number of seeds per capsule (by 11%), and thousand seed weight (by 6%), compared to S0. Furthermore, over the years, relative to control, sesame under S40 had a higher seed yield by 28% and enhanced the net economic returns by 44%. Thus, our results suggest that optimum S level at the time of sowing improves the nutrient uptake and distribution during the plant lifecycle, which ultimately enhances total dry matter accumulation, seed yield, and net productivity of sesame.

scholarly journals Effects of seed rates and row spacing on yield and yield components of linseed (Linum usitatissimum L) at Dabat district of North Gondar Zone, Ethiopia

2020 ◽  
Vol 7 (1) ◽  
pp. 1-5
Author(s):  
Daniel Tadesse ◽  
Yenus Ousman ◽  
Mequanint Teshome
Keyword(s):  
Seed Yield ◽  
Yield Components ◽  
Seed Weight ◽  
Row Spacing ◽  
Seeding Rate ◽  
Seed Rate ◽  
Main Effect ◽  
Yield And Yield Components ◽  
Poor Seed ◽  
Thousand Seed Weight

The area coverage and productivity of linseed decreased from time to time; even there is no crop package and recommended row spacing and seed rate at regional level due to lack of attention by researchers and also by farmers. In Ethiopia, linseed has been cultivated for two primary purposes, seed and oil use. Its production in Ethiopia country is characterized by low input, low yield and poor product quality mainly due to attitude and poor management practices such as lack of proper weed management system, poor seed and field hygiene, poor seed bed preparation, inadequate plant nutrition, inappropriate seeding rate and spacing (mostly broad casting), improper threshing ground and improper cleaning. Field experiment was carried out to evaluate the effects of seed rate and row spacing on the yield and yield components of linseed, during 2017/2018 cropping season at Dabat district, North Western Ethiopia. KULUMSA1 (CHILALO) was used as test crop. Factorial combinations of three row spacing, (20, 25, and 30 cm) and three seed rates, (40, 45 and 50kgs) were laid out in RCBD with three replications.  Data regarding different parameters were recorded from days to sowing up to different stages. Statistical analysis of data showed that most of the parameters were affected by the main effects of Seed Rates and Row spacing. The main effect of seed rate was highly significant for days maturity, thousand seed weight and harvest index of linseed. More over it was significant for days to flower and number of capsule per plant, but it was not significant to plant height and bio mass yield. The main effect of row spacing was significant for days to maturity. The interaction of seed rate and row spacing was highly significance (p<0.05) for number of primarily branch per plant and seed yield. It was not significant on number of seeds per capsule, number of capsule per plant and thousand seed weight. The main finding of this research is highest seed yield (1771 kg ha-1 ) was obtained at 40kg ha-1 x 25 cm of row spacing while the lowest seed yield (752kg ha-1) was recorded at 50 kg ha-1 x 30 cm. 40kg ha-1 and 25cm is recommended to increase yield of linseed and its components. In conclusion the effect of seed rate and row spacing affects the important yield components of linseed.

scholarly journals The effect of production area on the development of yield producing factors of maize (Zea mays L.) hybrids of different genotypes

2016 ◽  
pp. 67-72
Author(s):  
Eszter Murányi
Keyword(s):  
Seed Weight ◽  
Plant Density ◽  
Research Work ◽  
Plant Production ◽  
Row Spacing ◽  
Individual Plant ◽  
Significant Difference ◽  
Plant Densities ◽  
Production Area ◽  
Thousand Seed Weight

Maize yield amount development is determined by the given crop year and the genotype of the applied hybrid, but beside these also by the applied agrotechnical factors, in particular by sowing technology. The development of yield amount and yield producing factors of five maize hybrids of different genotypes has been studied in a small-plot field experiment by the application of different row spacings and plant density variants. The production of the individual plants shows decreasing tendency parallel to the increasing plant density, however, this decrement is compensated by the higher number of plants per unit production area. Individual plant production is determined by the development of yield producing factors, such as the length and the diameter of cobs, just as by the thousand seed weight – that were studied in the present research work as well. In the present research work the decreasing row spacing resulted in a yield increment of 0.67 t ha-1 (4.53%) in 2013, while in contrast in 2014 yield was decreased by 1.75 t ha-1 (14.87%). The high amount of precipitation in March was determinant in 2013: it filled up the soil water stock and balanced the negative effect of the inadequate amount and distribution of precipitation during the vegetation period for the yield. Lower extent of yield increment (0.6 t ha-1) was registered in 2014 in case of the row spacing of 76 cm than in the previous year. In case of a row spacing of 45 cm the difference between the two crop years was 3.1 t ha-1. The highest impact on the yield production factors was found in all treatment combinations in case of the applied hybrid among the three studied treatment factors. In the crop year of 2014 the effect of plant density on cob diameter and thousand seed weight could be revealed as well. In case of the cob diameter significant difference was found between the plant densities of 70 000 and 90 000 plants ha-1, just as between the populations with densities of 50 000 and 90 000 plants ha-1. In case of the thousand seed weight significant differences could be found by the application of plant densities of 70 000 and 90 000 plants ha-1. The highest values of the studied yield producing factors were measured in case of the plant densities of 50 000 and 70 000 plants ha-1; increasing the plant density to 90 000 plants ha-1 resulted in rather decreasing values.

Sign in / Sign up

Export Citation Format

Share Document