scholarly journals Formulation Development to Enhance the Solubility of Metoclopramide Base Drug by Solid Dispersion and Evaluation of Transdermal Film

2018 ◽  
Vol 8 (6) ◽  
pp. 183-191
Author(s):  
Goutam Mukhopadhyay ◽  
Rahul Mukhopadhyay ◽  
Ankita Mukhopadhyay ◽  
Shymodip Kundu ◽  
Banerjee Shreya ◽  
...  
Keyword(s):  
Melting Point ◽  
Controlled Release ◽  
Solid Dispersion ◽  
Aqueous Solubility ◽  
Water Soluble ◽  
Formulation Development ◽  
Dissolution Study ◽  
Phase Solubility Study ◽  
Metoclopramide Hydrochloride ◽  
Pvp K30

Aims & Objectives: The present work deals with the modification of controlled release dosage form of poorly water soluble drug (Metoclopramide hydrochloride) in order to improve the bioavailability and to control drug release for a longer period of time by the aid of solid dispersion. Methods: Various binary combination of MET-solid dispersion was prepared with different carriers such as HPβCD, PVP K30 and PLX-188 by solvent evaporation technique and then the aqueous solubility, dissolution study and phase solubility study was performed. DSC analysis is performed to carry out for metoclopramide loaded solid dispersion, physical mixture & also for pure drug to analyze the crystalline and amorphous nature of compounds. Results and Discussion:  The saturation solubility of Metoclopramide with various carriers at different pH was performed and found that in pH 5.5 (solubility is 5553.2µg/ml), pH 6.8 (3363.3µ/ml), pH 7.4 (1367.3µg/ml) at 37oC. In dissolution study of solid dispersion (5:1) of different carriers in DDW, the Cumulative % dissolution is found in the order of PVP K30>PLX-Met>HPβCD-Met & in pH 7.4, in the order of PLX-Met>PVP K30>HPβCD-Met. DSC thermogram of Metoclopramide base showed a sharp endothermic peak at its melting point (147oC) which exhibits in crystalline form complying with that of Metoclopramide hydrochloride form, melting point was found to be 850C.  In the ex-vivo study of several transdermal patches, patch C [SD of MET: HPβCD (1:5)] showed the controlled release and permeation of drug. Conclusion: Poor solubility of new chemical entities being a well known problem for past few decades despite the imbalance between significant research efforts & few successful marketed formulations, the solid dispersion proves to hold a key position among all the various formulation strategies to enhance the aqueous solubility & dissolution rate and thereby the bioavailability of  poorly aqueous solubility of drug. Keywords: Bioavailability,DSC, Metoclopramide hydrochloride, solid dispersion, HPβCD,

scholarly journals REVIEW ARTICLE: SOLUBILITY ENHANCEMENT BY SOLID DISPERSION

2017 ◽  
Vol 9 (3) ◽  
pp. 15
Author(s):  
A. N. Patil ◽  
D. M. Shinkar ◽  
R. B. Saudagar
Keyword(s):  
Solid Dispersion ◽  
Aqueous Solubility ◽  
Water Soluble ◽  
Full Potential ◽  
Drug Selection ◽  
Formulation Development ◽  
Poorly Water Soluble Drugs ◽  
New Chemical Entities ◽  
Water Soluble Drugs ◽  
Poorly Water Soluble

Enhancement of solubility, dissolution rate and bioavailability of the drug is a very challenging task in drug development, nearly 40% of the new chemical entities currently being discovered are poorly water soluble drugs. The solubility behaviour of the drugs remains one of the most challenging aspects in formulation development. This results in important products not reaching the market or not achieving their full potential. Solid dispersion is one of the techniques adopted for the formulation of such drugs and various methods are used for the preparation of solid dispersion. Solid dispersion is generally prepared with a drug which is having poor aqueous solubility and hydrophilic carrier. This article review various methods and concept of solid dispersion, criteria for drug selection, advantage and disadvantage, characterization, and application.

scholarly journals FORMULATION DEVELOPMENT AND EVALUATION OF GASTRO-RETENTIVE DOSAGE FORM OF ATAZANAVIR SULPHATE

2018 ◽  
Vol 10 (1) ◽  
pp. 60
Author(s):  
Hemant Kumar Jain ◽  
Madhuri Taware
Keyword(s):  
Solid Dispersion ◽  
Dosage Form ◽  
In Vitro Release ◽  
Hplc Method ◽  
Phase Solubility ◽  
Dissolution Profile ◽  
Formulation Development ◽  
Peg 6000 ◽  
Phase Solubility Study ◽  
Gastro Retentive

Objective: To improve dissolution properties of atazanavir sulphate by preparing gastro-retentive granules by solid dispersion method and development of RP-HPLC method for estimation of this drug.Methods: Estimation of atazanavir sulphate was done using high performance liquid chromatography (HPLC) on inertsil column (5 µm, 250x4, 6 mm) with a mobile phase consists of methanol: water (91:9 v/v), at 0.5 ml/min flow rate and 249 nm UV detection. The method was validated as per ICH guidelines. Selection of the carrier for gastro-retentive formulation was based on phase solubility study of the drug. Solid dispersions of gastro-retentive granules of different composition of drug and carrier, were prepared by the kneading, heating and solvent evaporation. A 32factorial design was applied to optimize the gastro-retentive formulation. The amounts of polyethylene glycol 6000 (PEG 6000) (X1) and hydroxypropyl methyl cellulose (HPMC) (X2) were selected as independent variables and in vitro-release at 5, 9 h and total floating time was selected as dependent variables. Results: HPLC method was found to be linear in a concentration range of 10-60 μg/ml of the drug (r2= 0.999). The low value of % RSD in precision study indicates reproducibility of the method. The low value of LOD and LOQ suggests the sensitivity of the method. The solubility enhancement study of drug with various carriers followed descending order of solubility [Gelucire 44/14>PEG 6000>polyvinyl pyrrilidone (PVP)]. Highest % cumulative release was observed for the heating method at drug polymer (PEG 6000) ratio 1:5. Hence, this ratio has been selected for preparation of solid dispersion. From comparison of dissolution profile of formulated batches, formulation F4 [containing PEG6000 (1.6 g) and HPMC (200 mg)] showed promising dissolution parameters with desired floating properties.Conclusion: Results obtained by validation studies suggested that the developed HPLC method is simple, accurate, precise and can be used for routine analysis of atazanavir sulphate formulation. Results of evaluation of prepared batches indicate that batch F4 is a promising formulation for gastro-retentive dosage form of drug. 

scholarly journals Application of Solid Dispersion Technique to Improve Solubility and Sustain Release of Emamectin Benzoate

Molecules ◽  
2019 ◽  
Vol 24 (23) ◽  
pp. 4315
Author(s):  
Bin Bin Huang ◽  
Dong Xu Liu ◽  
De Kun Liu ◽  
Gang Wu
Keyword(s):  
Solid Dispersion ◽  
Rotational Speed ◽  
Mixing Time ◽  
Solid Dispersions ◽  
Aqueous Solubility ◽  
Feed Ratio ◽  
Emamectin Benzoate ◽  
Wettable Powder ◽  
Dispersion Technique ◽  
Pvp K30

The solid dispersion technique, which is widely used in the medical field, was applied to prepare a pesticide dosage form of emamectin benzoate (EM). The preparation, physicochemical characterization, aqueous solubility, release dynamics, photolytic degradation, bioactivity, and sustained-release effects of the prepared EM solid dispersions were studied by a solvent method, using polymer materials as the carriers. Water-soluble polyvinyl pyrrolidone (PVP) K30 and water-insoluble polyacrylic resin (PR)III were used as the carriers. The influence of various parameters, such as different EM:PVP-K30 and EM:PRIII feed ratios, solvent and container choices, rotational speed and mixing time effects on pesticide loading, and the entrapment rate of the solid dispersions were investigated. The optimal conditions for the preparation of EM-PVP-K30 solid dispersions required the use of methanol and a feed ratio between 1:1 and 1:50, along with a rotational speed and mixing time of 600 rpm and 60 min, respectively. For the preparation of EM-PRIII solid dispersions, the use of methanol and a feed ratio between 1:4 and 1:50 were required, in addition to the use of a porcelain mortar for carrying out the process. Under optimized conditions, the prepared EM-PVP-K30 solid dispersions resembled potato-like, round, and irregular structures with a jagged surface. In contrast, the EM-PRIII solid dispersions were irregular solids with a microporous surface structure. The results of X-ray powder diffraction (XRD), differential scanning calorimetry (DSC), ultraviolet (UV) spectrometry, and infrared (IR) spectrometry showed that the solid dispersions were formed by intermolecular hydrogen bonding. The solid dispersion preparation in PVP-K30 significantly improved the solubility and dissolution rate of EM, particularly the aqueous solubility, which reached a maximum of 37.5-times the EM technical solubility, when the feed ratio of 1:10 was employed to prepare the dispersion. Importantly, the wettable powder of EM-PVP-K30 solid dispersion enhanced the insecticidal activity of EM against the Plutella xylostella larvae. Furthermore, the solid dispersion preparation in PRIII afforded a significant advantage by prolonging the EM technical release in water at a pH below 7.0, especially when the PRIII content in solid dispersions was high. While the amplified toxicity of the wettable powder of EM-PRIII solid dispersions against the P. xylostella larvae showed no significant differences from that of the EM technical, the long-term toxicity under the field condition was much better than that of the commercially available EM 1.5% emulsifiable concentrate. Notably, solid dispersions with both the PVP-K30 and PRIII carriers reduced the effect of UV photolysis.

scholarly journals Insoluble Polymers in Solid Dispersions for Improving Bioavailability of Poorly Water-Soluble Drugs

Polymers ◽  
2020 ◽  
Vol 12 (8) ◽  
pp. 1679
Author(s):  
Thao T.D. Tran ◽  
Phuong H.L. Tran
Keyword(s):  
Solid Dispersion ◽  
Solid Dispersions ◽  
Water Soluble ◽  
Dissolution Enhancement ◽  
Formulation Development ◽  
Poorly Water Soluble Drugs ◽  
Water Soluble Drugs ◽  
Poorly Water Soluble ◽  
Insoluble Polymers

In recent decades, solid dispersions have been demonstrated as an effective approach for improving the bioavailability of poorly water-soluble drugs, as have solid dispersion techniques that include the application of nanotechnology. Many studies have reported on the ability to change drug crystallinity and molecular interactions to enhance the dissolution rate of solid dispersions using hydrophilic carriers. However, numerous studies have indicated that insoluble carriers are also promising excipients in solid dispersions. In this report, an overview of solid dispersion strategies involving insoluble carriers has been provided. In addition to the role of solubility and dissolution enhancement, the perspectives of the use of these polymers in controlled release solid dispersions have been classified and discussed. Moreover, the compatibility between methods and carriers and between drug and carrier is mentioned. In general, this report on solid dispersions using insoluble carriers could provide a specific approach and/or a selection of these polymers for further formulation development and clinical applications.

scholarly journals Design and Characterization of Phosphatidylcholine-Based Solid Dispersions of Aprepitant for Enhanced Solubility and Dissolution

Pharmaceutics ◽  
2020 ◽  
Vol 12 (5) ◽  
pp. 407
Author(s):  
Sooho Yeo ◽  
Jieun An ◽  
Changhee Park ◽  
Dohyun Kim ◽  
Jaehwi Lee
Keyword(s):  
Solid Dispersion ◽  
Solid Dispersions ◽  
Amorphous State ◽  
Aqueous Solubility ◽  
Water Soluble ◽  
Scanning Calorimetry ◽  
Promising Alternative ◽  
Dispersion System ◽  
Enhanced Solubility ◽  
Water Soluble Drugs

This study aimed to improve the solubility and dissolution of aprepitant, a drug with poor aqueous solubility, using a phosphatidylcholine (PC)-based solid dispersion system. When fabricating the PC-based solid dispersion, we employed mesoporous microparticles, as an adsorbent, and disintegrants to improve the sticky nature of PC and dissolution of aprepitant, respectively. The solid dispersions were prepared by a solvent evaporation technique and characterized by Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry, and X-ray powder diffraction. The FTIR results showed that aprepitant interacted with the PC carrier by both hydrogen bonds and van der Waals forces that can also be observed in the interaction between aprepitant and polymer carriers. The solid dispersions fabricated with only PC were not sufficient to convert the crystallinity of aprepitant to an amorphous state, whereas the formulations that included adsorbent and disintegrant successfully changed that of aprepitant to an amorphous state. Both the solubility and dissolution of aprepitant were considerably enhanced in the PC-based solid dispersions containing adsorbent and disintegrant compared with those of pure aprepitant and polymer-based solid dispersions. Therefore, these results suggest that our PC-based solid dispersion system is a promising alternative to conventional formulations for poorly water-soluble drugs, such as aprepitant.

scholarly journals Improved Dissolution of Albendazole from High Drug Loaded Ternary Solid Dispersion: Formulation and Characterization

2021 ◽  
Vol 20 (2) ◽  
pp. 149-158
Author(s):  
Shimul Halder ◽  
MAK Azad ◽  
Hrishik Iqbal ◽  
Madhabi Lata Shuma ◽  
Eva Rahman Kabir
Keyword(s):  
Solid Dispersion ◽  
Drug Loading ◽  
Aqueous Solubility ◽  
Drug Carriers ◽  
Physicochemical Characteristics ◽  
Water Soluble ◽  
Dissolution Behavior ◽  
Scanning Calorimetry ◽  
High Drug ◽  
Enhanced Solubility

Bioavailability of a poorly water-soluble drug, e.g., widely used anthelmintic drug Albendazole (ABZ), is very low and thus, to obtain an optimized therapeutic efficacy, the aqueous solubility of such drugs needs to be enhanced. The objective of this study was to develop an effective high drug-loaded solid dispersion (SD) of ABZ with two biocompatible drug carriers, namely Soluplus® and Ludiflash® to improve its physicochemical characteristics. Equilibrium solubility study was performed to choose the optimum polymer ratio among the formulations and it showed up to 50-fold enhanced solubility compared to crystalline ABZ in water. X-Ray Powder Diffraction (XRPD) and Differential Scanning Calorimetry (DSC) studies of SD-ABZ showed reduced crystallinity of ABZ in the SD. The polymeric carriers, notably Soluplus®, are thought to play a key role in the reduction of crystallinity and molecular polydispersity of ABZ. The dissolution studies in water showed improved dissolution of SD-ABZ compared to crystalline ABZ, with a quick onset of drug release followed by gradual dissolution. However, due to high drug-loading and retention of crystalline ABZ in the sample, the dissolution behavior was not as expected, and may require further studies to optimize the SD-ABZ formulation. Dhaka Univ. J. Pharm. Sci. 20(2): 149-158, 2021 (December)

scholarly journals Solubility enhancement (Solid Dispersions) novel boon to increase bioavailability

2019 ◽  
Vol 9 (2) ◽  
pp. 583-590 ◽  
Author(s):  
Sandip R. Pawar ◽  
Shashikant D. Barhate
Keyword(s):  
Particle Size ◽  
Solid Dispersion ◽  
Water Solubility ◽  
New Technologies ◽  
Aqueous Media ◽  
Solubility Enhancement ◽  
Water Soluble ◽  
Formulation Development ◽  
Particle Size Reduction ◽  
Poorly Soluble

The solubility of a solute is the maximum quantity of solute that can dissolve in a certain quantity of solvent or quantity of solution at a specified temperature. Solubility is one of the important parameter to achieve desired concentration of drug in systemic circulation for pharmacological response to be shown. Solubility is essential for the therapeutic effectiveness of the drug, independent of the route of administration. Low aqueous solubility is the major problem encountered with formulation development of new chemical entities as well as for the generic development. Poorly soluble drugs are often a challenging task for formulators in the industry Conventional  approaches  for  enhancement  of  solubility  have  limited  applicability,  especially when  the  drugs  are  poorly  soluble  simultaneously  in  aqueous  and  in  non-aqueous  media. Drug with poor water solubility cause slow dissolution rates, generally show erratic and incomplete absorption leading to low bioavailability when administered orally. Solubilization may be affected by cosolvent water  interaction, micellar solubilization, reduction in  particle  size,  inclusion  complexes,  solid  dispersion,  and  change  in  polymorph.  Some  new technologies  are  also  available  to  increase  the  solubility  like  micro emulsion,  self-emulsifying drug  delivery  system  and  supercritical  fluid  technology. This present review details about the different approaches used for the enhancement of the solubility of poorly water-soluble drugs include particle size reduction, nanonization, pH adjustment, solid dispersion, complexation, co‐solvency, hydrotropy etc. The purpose of this article is to describe the techniques of solubilization for the attainment of effective absorption and improved bioavailability. Keywords: Solubility, Solubility Enhancement, bioavailability, solid dispersion, Solid Dispersion, Solubilization.

scholarly journals FORMULATION DEVELOPMENT AND EVALUATION OF HIGHLY WATER-SOLUBLE DRUG-LOADED CONTROLLED RELEASE MATRIX TABLETS

2021 ◽  
Vol 44 (1) ◽  
pp. 15-29
Author(s):  
Aqsa Siraj ◽  
Muhammad Nasiri ◽  
Syed Naqvi ◽  
Tariq Ali ◽  
Rabia Yousaf ◽  
...  
Keyword(s):  
Controlled Release ◽  
Water Soluble ◽  
Matrix Tablets ◽  
Formulation Development ◽  
Water Soluble Drug

scholarly journals Formulation Development and Evaluation of Liposphere of Poor Water Soluble Drug for Hyperlipidemia

2021 ◽  
Vol 11 (2) ◽  
pp. 23-30
Author(s):  
Anil Kumar ◽  
Umesh K. Jain ◽  
Ajay Patel
Keyword(s):  
Drug Release ◽  
Stearic Acid ◽  
Aqueous Solubility ◽  
Class Ii ◽  
Water Soluble ◽  
Fibric Acid Derivative ◽  
Formulation Development ◽  
Bcs Class Ii ◽  
Paraffin Oil

Lipospheres offer a new approach to improve an aqueous solubility of BCS class-II drugs. Simvastatin is a third generation fibric acid derivative belonging to this class, employed clinically as a hypolipidemic agent to lessen the risk caused by atherosclerosis. An attempt was made to improve aqueous solubility of Simvastatin by aid of stearic acid and Paraffin oil. The factorial batches of the Simvastatin lipospheres were formulated by melt dispersion technique using 32 factorial design with variables X1- concentration of stearic acid and X2- concentration of paraffin oil and responses Y1 - % Drug Entrapment (% DE) and Y2 - % Drug Release (% DR). From the surface response graphs the optimized batch was formulated and evaluated for saturation solubility, in-vitro drug release studies. Significant improvement in the aqueous solubility of the drug in the Simvastatin lipospheres supports the applicability of lipospheres as a tool for improving aqueous solubility of the BCS class-II drugs. Keywords: Linospheres; Simvastatin; Drug release; Hyperlipidemic; Drug entrapment.

Sign in / Sign up

Export Citation Format

Share Document