scholarly journals Kinetics and optimization on discoloration of dyeing wastewater by schorl-catalyzed fenton-like reaction

2014 ◽  
Vol 79 (3) ◽  
pp. 361-377 ◽  
Author(s):  
Huan-Yan Xu ◽  
Wei-Chao Liu ◽  
Shu-Yan Qi ◽  
Yan Li ◽  
Yuan Zhao ◽  
...  
Keyword(s):  
Response Surface ◽  
Reaction Rate Constant ◽  
Second Order ◽  
Order Kinetic ◽  
Reaction Conditions ◽  
Design And Optimization ◽  
Order Kinetic Model ◽  
Kinetic Investigations ◽  
The Relationship ◽  
Experimental Design And Optimization

Kinetics and optimization on the discoloration of an active commercial dye, Argazol Blue BFBR (ABB) by heterogeneous Fenton-like reaction catalyzed by natural schorl were investigated in this study. Kinetic investigations revealed that the first-order kinetic model was more favorable to describe the discoloration of ABB at different reaction conditions than the second-order and Behnajady-Modirshahla-Ghanbery models. The relationship between the reaction rate constant k and reaction temperature T followed the Arrhenius equation, with the apparent activation energy Ea of 51.31kJ?mol-1. The central composite design under the response surface methodology was employed for the experimental design and optimization of the ABB discoloration process. The significance of a second order polynomial model for predicting the optimal values of ABB discoloration was evaluated by the analysis of variance and 3D response surface plots for the interactions between two variables were constructed. Then, the optimum conditions were determined.

Dyeing mechanism and photodegradation kinetics of gardenia yellow natural colorant

2020 ◽  
pp. 004051752095848
Author(s):  
Huiyu Jiang ◽  
Xiaodong Hu ◽  
Asfandyar Khan ◽  
Jinbo Yao ◽  
Muhammad Tahir Hussain
Keyword(s):  
Kinetic Model ◽  
Cotton Fabric ◽  
Reaction Rate Constant ◽  
Second Order ◽  
Order Kinetic ◽  
Natural Colorant ◽  
Yellow Solution ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Dyeing Rate

In this study, gardenia yellow solution is used to dye 100% cotton fabric. The dyeing rate curve and adsorption isotherms were recorded to explore the thermodynamic model and to calculate the corresponding parameters. A definite concentration of gardenia yellow solution was placed under the xenon arc lamp for irradiation to test its photodegradability. Absorbance of the solution was measured at different degradation times and the corresponding varying curve of the absorbance was drawn to explore the photodegradation reaction order of the natural colorant and consistent parameters were calculated. The experimental results proved that the dyeing of cotton fabric with gardenia yellow colorant followed the pseudo second order kinetic model whereas adsorption isotherm followed the Langmuir model and the photodegradation process followed the second order kinetic model. Values of different parameters were calculated: reaction rate constant k = 2.26 × 10–3 (mg · L−1)1−m h−1, the correlation coefficient R2 = 0.994, and half decay time t1/2 = 5.82 h.

Studies of Chromium Removal from Tannery Effluents by Dead Streptomyces Rimosus

2008 ◽  
Vol 3 (1) ◽  
Author(s):  
Mohamed Nasser Sahmoune ◽  
Krim Louhab ◽  
Aissa Boukhiar
Keyword(s):  
Fractional Power ◽  
Kinetic Studies ◽  
Second Order ◽  
Order Kinetic ◽  
Streptomyces Rimosus ◽  
Tannery Effluents ◽  
Equilibrium Data ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Ph Range

Dead streptomyces rimosus was found to be an effective biosorbent for the removal of chromium from industrial tanning effluents. A sorption level of 65 mg/g was observed at pH 4.8 while the precipitation effect augmented this value at a higher pH range. Chromium desorption increased with decreasing desorption agents pH (including HCl and H2SO4) to a maximum value of 95% at approximately zero pH. The biosorption data of trivalent chromium by streptomyces rimosus has been used for kinetic studies based on fractional power, Elovich, pseudo-first order and pseudo-second order rate expressions. The time-dependent Cr (III) biosorption data were well-described by a pseudo-second-order kinetic model. The intraparticle diffusion is not the rate-limiting step for the whole reaction. It was found that the biosorption equilibrium data fit well with the Langmuir model.

scholarly journals OPTIMIZATION OF LEVOFLOXACIN REMOVAL FROM AQUEOUS SOLUTION USING ELECTROCOAGULATION PROCESS BY RESPONSE SURFACE METHODOLOGY

2021 ◽  
Vol 52 (1) ◽  
pp. 204-217
Author(s):  
Mohammed & Mohammed-Ridha
Keyword(s):  
Aqueous Solution ◽  
Response Surface Methodology ◽  
Response Surface ◽  
Correlation Coefficient ◽  
Iron Hydroxide ◽  
Second Order ◽  
Experimental Results ◽  
Order Kinetic ◽  
Experimental Conditions ◽  
Good Agreement

This study was aimed to investigate the response surface methodology (RSM) to evaluate the effects of various experimental conditions on the removal of levofloxacin (LVX) from the aqueous solution by means of electrocoagulation (EC) technique with stainless steel electrodes. The EC process was achieved successfully with the efficiency of LVX removal of 90%. The results obtained from the regression analysis, showed that the data of experiential are better fitted to the polynomial model of second-order with the predicted correlation coefficient (pred. R2) of 0.723, adjusted correlation coefficient (Adj. R2) of 0.907 and correlation coefficient values (R2) of 0.952. This shows that the predicted models and experimental values are in good agreement. The results of the kinetic study showed that the second-order kinetic model was in good agreement with the experimental results and suggested that the mechanism of chemisorption controlled the LVX adsorption. The experimental results indicated that the adsorption of LVX on iron hydroxide flocs follows Sips isotherm with the value of the correlation coefficient (R2) of 0.937. Sips isotherm shows that both homogenous and heterogeneous adsorption can occur.

scholarly journals Ups and Downs of Water Photodecolorization by Nanocomposite Polymer Nanofibers

Nanomaterials ◽  
2019 ◽  
Vol 9 (2) ◽  
pp. 250 ◽  
Author(s):  
Shahin Homaeigohar ◽  
Niharika Krishna Botcha ◽  
Eman. S. Zarie ◽  
Mady Elbahri
Keyword(s):  
Structural Properties ◽  
Thermomechanical Properties ◽  
Second Order ◽  
Point Of View ◽  
Order Kinetic ◽  
Dye Molecules ◽  
Nanocomposite Polymer ◽  
Nanocomposite System ◽  
Order Kinetic Model ◽  
Pros And Cons

Given the exponentially expanding water pollution causing water scarcity, there is an urgent need for operative nanotechnological systems that can purify water, with insignificant energy consumption, and rapidly. Here, we introduce a nanocomposite system based on TiO2 nanoparticles (NPs) and PES nanofibers (NFs) that can adsorb and then photodecompose organic water pollutants such as dye molecules. We evaluate pros and cons of this system with respect to its purification efficiency and structural properties that can be impacted by the photocatalytic activity of the nanofillers. While the material is superhydrophilic and able to remove 95% methylene blue (MB) from water via adsorption/photodecomposition, its thermomechanical properties decline upon UV irradiation. However, these properties still remain at the level of the neat NFs. The removal behavior is modeled by the first- and second-order kinetic models from the kinetic point of view. The nanocomposite NFs’ removal behavior complies much better with the second-order kinetic model. Overall, such feedbacks implied that the nanocomposite can be effectively applied for water treatment and the structural properties are still as reliable as those of the neat counterpart.

Iron Chelation by Polyamidoamine Dendrimers: A Second-Order Kinetic Model for Metal–Amine Complexation

2011 ◽  
Vol 115 (46) ◽  
pp. 13534-13540 ◽  
Author(s):  
Michael R. Mankbadi ◽  
Mohamed A. Barakat ◽  
Mohamed H. Ramadan ◽  
H. Lee Woodcock ◽  
John N. Kuhn
Keyword(s):  
Kinetic Model ◽  
Iron Chelation ◽  
Second Order ◽  
Order Kinetic ◽  
Polyamidoamine Dendrimers ◽  
Order Kinetic Model ◽  
Metal Amine

scholarly journals Modified Spruce Sawdust for Sorption of Hexavalent Chromium in Batch Systems and Fixed-Bed Columns

Molecules ◽  
2020 ◽  
Vol 25 (21) ◽  
pp. 5156
Author(s):  
Dororthea Politi ◽  
Dimitrios Sidiras
Keyword(s):  
Sulfuric Acid ◽  
Adsorption Capacity ◽  
Hexavalent Chromium ◽  
Diethylene Glycol ◽  
Fixed Bed ◽  
Second Order ◽  
Isotherm Models ◽  
Order Kinetic ◽  
Order Kinetic Model ◽  
Pseudo Second Order

This study investigated the potential use of spruce sawdust that was pretreated with diethylene glycol and sulfuric acid for the removal of hexavalent chromium from wastewater. The sawdust pretreatment process was conducted at different temperatures and times. The adsorbent was characterized by quantitative saccharification, scanning electron microscopy, and Brunauer–Emmet–Teller surface area analysis. Adsorption capacity was studied for both batch and column processes. The experimental adsorption isotherms were simulated using seven isotherm models, including Freundlich and Langmuir models. By using the Langmuir isotherm model, the maximal Cr(VI) adsorption capacity of organosolv-pretreated spruce sawdust (qm) was 318.3 mg g−1. Furthermore, the kinetic data were fitted to Lagergren, pseudo-second-order, and intraparticle diffusion models, revealing that the adsorption of Cr(VI) onto spruce sawdust pretreated with diethylene glycol and sulfuric acid is best represented by the pseudo-second-order kinetic model. Three kinetic models, namely, the Bohart–Adams model, Thomas model, and modified dose–response (MDR) model, were used to fit the experimental data obtained from the column experiments and to resolve the characteristic parameters. The Thomas adsorption column capacity of the sawdust was increased from 2.44 to 31.1 mg g−1 upon pretreatment, thus, demonstrating that organosolv treatment enhances the adsorption capability of the material.

scholarly journals Preparation and Characterization of Chitosan/Feldspar Biohybrid as an Adsorbent: Optimization of Adsorption Process via Response Surface Modeling

2014 ◽  
Vol 2014 ◽  
pp. 1-13 ◽  
Author(s):  
Maryam Yazdani ◽  
Hajir Bahrami ◽  
Mokhtar Arami
Keyword(s):  
Response Surface ◽  
Adsorption Process ◽  
Dye Adsorption ◽  
Surface Modeling ◽  
Quadratic Model ◽  
Response Surface Modeling ◽  
Prediction Errors ◽  
Order Kinetic ◽  
Order Kinetic Model ◽  
Process Factors

Chitosan/feldspar biobased beads were synthesized, characterized, and tested for the removal of Acid Black 1 dye from aquatic phases. A four-factor central composite design (CCD) accompanied by response surface modeling (RSM) and optimization was used to optimize the dye adsorption by the adsorbent (chitosan/feldspar composite) in 31 different batch experiments. Independent variables of temperature, pH, initial dye concentration, and adsorbent dose were used to change to coded values. To anticipate the responses, a quadratic model was applied. Analysis of variance (ANOVA) tested the significance of the process factors and their interactions. The adequacy of the model was investigated by the correlation between experimental and predicted data of the adsorption and the calculation of prediction errors. The results showed that the predicted maximum adsorption amount of 21.63 mg/g under the optimum conditions (pH 3, temperature 15°C, initial dye concentration 125 mg/L, and dose 0.2 g/50 mL) was close to the experimental value of 19.85 mg/g. In addition, the results of adsorption behaviors of the dye illustrated that the adsorption process followed the Langmuir isotherm model and the pseudo-second-order kinetic model. Langmuir sorption capacity was found to be 17.86 mg/g. Besides, thermodynamic parameters were evaluated and revealed that the adsorption process was exothermic and favourable.

Second-Order Kinetic Model for the Sorption of Cu(II) Ions in Aqueous Solutions of Zeolite NaA

2012 ◽  
Vol 560-561 ◽  
pp. 1174-1177 ◽  
Author(s):  
Dimitar Petrov Georgiev ◽  
Bogdan Iliev Bogdanov ◽  
Yancho Hristov ◽  
Irena Markovska
Keyword(s):  
Kinetic Model ◽  
Aqueous Solutions ◽  
Kinetic Parameters ◽  
Linear Equations ◽  
Linear Method ◽  
Second Order ◽  
Order Kinetic ◽  
Zeolite Naa ◽  
Order Kinetic Model ◽  
Pseudo Second Order

In this study, the sorption of Cu(II) ions in aqueous solutions of Zeolite NaA by performing batch kinetic sorption experiments. The equilibrium kinetic data were analyzed using the pseudo-second-order kinetic model. A comparison was made of the linear least-squares method and nonlinear method of the widely used pseudo-second-order kinetic model for the sorption of Cu(II) ions of Zeolite . Four pseudo-second-order kinetic linear equations are discussed. Kinetic parameters obtained from the four kinetic linear equations using the linear method differed but they were the same when using the non-linear method. Kinetic parameters obtained from four kinetic linear equations using the linear method differed. Equation type 1 pseudo-second-order kinetic model very well represented the kinetic of the adsorption Cu(II) ions by Zeolite NaA. Equation type 4 exhibited the worst fit. Present investigation showed that the non-linear method may be a better way to determine the kinetic parameters.

Sign in / Sign up

Export Citation Format

Share Document