scholarly journals XPS Investigation of ceramic matrixes for disposal of long-living radioactive waste products

2004 ◽  
Vol 19 (1) ◽  
pp. 31-38 ◽  
Author(s):  
Yury Teterin ◽  
Serguei Stefanovskij ◽  
Serguei Yudintsev ◽  
George Bek-Uzarov ◽  
Anton Teterin ◽  
...  

The synthesis of ceramic matrixes for the long-term storage of highly active radionuclide wastes and determination of physical and chemical forms of radionuclides in them is one of the important problems in radioecology. It enables to create purpose fully materials for the long-term storage of radionuclides. In the present work the samples of ceramics [CaCe0.9Ti2O6.8(I) and CaCeTi2O7(II}] formed under various conditions were investigated with the X-ray photo electron spectroscopy. It is necessary for synthesis of ceramic matrixes, for the disposal of the plutonium and others tetravalent actinides. A technique was developed for the determination of cerium oxidation state (Ce3+ and Ce4+) on the basis of the X-ray photo electron spectroscopy spectral structure characteristics. It was established that the sample (I) formed at 300 MPa and T = 1400 ?C in the air atmosphere contained on the surface two types of cerium ions in the ratio ? 63 atomic % of Ce3+ and 37 atomic % of Ce4+, and the sample (II) formed at 300 MPa and T= 1300 ?C in the oxygen atmosphere contained on its surface two types of cerium ions also, but in the ratio ? 36 atomic % of Ce3+ and 64 atomic % of Ce4+. It was established that on the surface of the studied ceramics carbonates of calcium and/or cerium could be formed under influence of the environment that leads to the destruction of ceramics.

Author(s):  
Allen Angel ◽  
Kathryn A. Jakes

Fabrics recovered from archaeological sites often are so badly degraded that fiber identification based on physical morphology is difficult. Although diagenetic changes may be viewed as destructive to factors necessary for the discernment of fiber information, changes occurring during any stage of a fiber's lifetime leave a record within the fiber's chemical and physical structure. These alterations may offer valuable clues to understanding the conditions of the fiber's growth, fiber preparation and fabric processing technology and conditions of burial or long term storage (1).Energy dispersive spectrometry has been reported to be suitable for determination of mordant treatment on historic fibers (2,3) and has been used to characterize metal wrapping of combination yarns (4,5). In this study, a technique is developed which provides fractured cross sections of fibers for x-ray analysis and elemental mapping. In addition, backscattered electron imaging (BSI) and energy dispersive x-ray microanalysis (EDS) are utilized to correlate elements to their distribution in fibers.


2012 ◽  
Vol 31 (4-5) ◽  
pp. 451-458 ◽  
Author(s):  
S. Fujieda ◽  
K. Shinoda ◽  
T. Inanaga ◽  
M. Abumiya ◽  
S. Suzuki

AbstractA novel process for preparing scorodite particles with a diameter of approximately 20 µm from Fe(II) and As(V) in aqueous solution has been developed by DOWA Metals and Mining. In the present study, the dissolution characteristics of iron and arsenic from the scorodite particles synthesized by this process have been investigated under different conditions. The results show that the concentration of arsenic dissolved from the particles in aqueous solution is very low, but it has a complicated dependence on the temperature and pH of the solution. Transmission electron microscopy (TEM) with an energy dispersive X-ray spectrometer (EDS) was used to analyze the morphology, structure, and composition of the scorodite particles. The results indicate that the scorodite particles exhibit a nearly octahedral shape with planes composed of almost (111) planes in the orthorhombic structure. The concentration of iron at the surface of the particles is higher than that of iron inside of the particles. This characteristic morphology, along with the minimal surface defects of the scorodite particles, is considered to be responsible for the low dissolution of arsenic from the particles in aqueous solution. Atmospheric temperature and solution conditions were also found to be important for the safe, long-term storage of arsenic using scorodite particles.


2021 ◽  
Vol 67 (No. 5) ◽  
pp. 195-203
Author(s):  
Dalibor Šafařík ◽  
Petra Hlaváčková ◽  
David Březina

The aim of the article is to describe the issue of determining the characteristics and parameters of raw timber natural losses due to shrinkage at long-term storage, defining the theoretical basis for creating standards, and verify its finding by means of a case study in raw timber storing. This issue is very topical in forestry practice in the Czech Republic as well as in other countries. The lower and upper limits of the standards were calculated, and the proposed mean value was grouped according to woody plants that reflected the most frequent commercial usage with respect to subsequent processing. Subsequently, experimental verification was carried out on a representative sample of 2 209.99 m3 of raw timber of Norway spruce (Picea abies /L./ H. Karst.) at selected forest administrations. Furthermore, the article addresses the related accounting and tax issues of the standards of natural losses of raw timber. Currently, no legislation mandates an entity to establish standards.


2004 ◽  
Vol 93 (10) ◽  
pp. 2609-2623 ◽  
Author(s):  
Derrick S. Katayama ◽  
Carol F. Kirchhoff ◽  
Carrie M. Elliott ◽  
Robert E. Johnson ◽  
Jeffry Borgmeyer ◽  
...  

2014 ◽  
Vol 60 (No. 4) ◽  
pp. 155-158
Author(s):  
J. Souček

The research, whose results are presented, is aimed at determination of development of moulds number in wood chips under different storage temperatures. The experiments were carried out with the moisture of samples 65%, 22% and 1%. During the long-term storage the effect of water content in material on development of moulds can be recorded. The risks linked to mould occurrence can be considerably eliminated by reduction of water content.  


1988 ◽  
Vol 34 (2) ◽  
pp. 372-376 ◽  
Author(s):  
C M Wilson ◽  
K McGilligan ◽  
D W Thomas

Abstract We compared Helena "QUIPlates" and Calbiochem "LC-Partigen" radial immunodiffusion systems for their ability to measure fecal concentrations of alpha 1-antitrypsin (FA1AT). Reference ranges for FA1AT concentrations in infants receiving various diets, in children, and in adults are given for each system. FA1AT values obtained with Calbiochem LC-Partigen plates averaged 30% greater than those obtained with Helena QUIPlates, but both systems distinguished between normal and high values. Studies involving variations of usual sample-handling procedures showed that storage at room temperature, repeated freezing and thawing, and long-term storage of frozen samples had no significant effect on measured FA1AT concentration. However, values obtained for lyophilized and nonlyophilized samples did not correlate well.


2007 ◽  
Vol 40 (4) ◽  
pp. 796-798 ◽  
Author(s):  
Bingyun Ao ◽  
Xiaolin Wang ◽  
Yongjun Wei ◽  
Yanzhi Zhang

In order to help resolve unknowns regarding aging effects of uranium during long-term storage of tritium, a number of experiments have been carried out by several researchers. However, almost no literature is available on the structural change of uranium tritide, mainly because its high toxicity and air-sensitivity render appropriate experiments very difficult. In this paper, a simple hermetic sample holder that fits the Philips X'Pert Pro X-ray diffractometer is described. It may be used to study the aging effects of uranium tritide during storage. The sample holder mainly consists of an aluminium container for sample storage and a Mylar window for X-ray measurements. This sample holder can also be used with other air-sensitive, radioactive and toxic materials. In this paper, the first results obtained from X-ray diffraction analysis of uranium hydride are presented.


Sign in / Sign up

Export Citation Format

Share Document