scholarly journals Fast computation of the iteration-based simulation method - case study of non-coherent ask with shadowing

2017 ◽  
Vol 14 (3) ◽  
pp. 415-431 ◽  
Author(s):  
Vladimir Mladenovic ◽  
Sergey Makov ◽  
Yigang Cen ◽  
Miroslav Lutovac

This article presents a new method of fast symbolic computations of very complex calculations, which are necessary for the analysis, simulation, and design of wireless communication systems using CAS (Computer Algebra System). CAS is applied to formulate hypotheses and define joint probability density functions of certain modulation technique. This is used to prepare for the semi-symbolic calculation to complete specify wireless system by using CAS. We have developed an iteration-based simulation method that aids to solve semisymbolic expressions and gives closed form solutions (with some parameters specified as numbers and some as symbols). So far, they are solved by numerical methods. Students can perform performance analysis and understand the processes in the data transfer. Engineers and researchers may have a better insight into the impact of the important parameters necessary to properly transmit and detect information unlike traditional numerical methods. The main contribution is to obtain solutions for the probability density function, and outage probability where no solution can be obtained using numerical methods. A strong emphasis is placed on very fast calculations that significantly save the time of analysis, simulation, and design.

2016 ◽  
Vol 13 (2) ◽  
pp. 157-174 ◽  
Author(s):  
Vladimir Mladenovic ◽  
Danijela Milosevic

In this paper, a new approach in solving and analysing the performances of the digital telecommunication non-coherent FSK/ASK system in the presence of noise is derived, by using a computer algebra system. So far, most previous solutions cannot be obtained in closed form, which can be a problem for detailed analysis of complex communication systems. In this case, there is no insight into the influence of certain parameters on the performance of the system. The analysis, modelling and design can be time-consuming. One of the main reasons is that these solutions are obtained by utilising traditional numerical tools in the shape of closed-form expressions. Our results were obtained in closed-form solutions. They are resolved by the introduction of an iteration-based simulation method. The Wolfram language is used for describing applied symbolic tools, and SchematicSolver application package has been used for designing. In a new way, the probability density function and the impact of the newly introduced parameter of iteration are performed when errors are calculated. Analyses of the new method are applied to several scenarios: without fading, in the presence of Rayleigh fading, Rician fading, and in cases when the signals are correlated and uncorrelated.


2019 ◽  
Vol 25 ◽  
pp. 01002 ◽  
Author(s):  
Lili Zhao ◽  
Peng Zhang ◽  
Qicai Dong ◽  
Xiangyang Huang ◽  
Jianhua Zhao ◽  
...  

Wireless communication technology has been developed rapidly after entering the 21st century. Data transfer rate increased significantly as well as the bandwidth became wider and wider from 2G to 4G in wireless communication systems. Channel estimation is an import part of any communication systems; its accuracy determines the quality of the whole communication. Channel estimation methods of typical wireless communication systems such as UWB, 2G and 3G have been researched.


MIMO technology offers large improvements in data transfer and connection range no bandwidth extra or processing potential in wireless communication,. Multiple transmitters and receivers are used to simultaneously transfer enormous amounts of data. Using many antennas transmitting and receiving, efficiency can be enhanced for wireless communication systems operating in fading environments. But the key downside in the new MIMO scheme, due to multiple Radio Frequency chains, is increased complexity and high cost. A daunting incentive is the development of techniques to reduce hardware and computing costs of the systems with a huge amount of antennas. The optimum selection of the receiver antenna subset is a very effective approach to achieving this goal. Genetic algorithm is used in this paper to choose the receivers from the available set of antennas that would then be compared with an existing receiving antenna selection process.


2010 ◽  
Vol 3 (1) ◽  
pp. 21-27 ◽  
Author(s):  
J. Machell ◽  
S. R. Mounce ◽  
J. B. Boxall

Abstract. Hydraulic simulation models of water distribution networks are routinely used for operational investigations and network design purposes. However, their full potential is often never realised because, in the majority of cases, they have been calibrated with data collected manually from the field during a single historic time period and, as such, reflect the network operational conditions that were prevalent at that time, and they are then applied as part of a reactive, desktop investigation. In order to use a hydraulic model to assist proactive distribution network management its element asset information must be up to date and it should be able to access current network information to drive simulations. Historically this advance has been restricted by the high cost of collecting and transferring the necessary field measurements. However, recent innovation and cost reductions associated with data transfer is resulting in collection of data from increasing numbers of sensors in water supply systems, and automatic transfer of the data to point of use. This means engineers potentially have access to a constant stream of current network data that enables a new era of "on-line" modelling that can be used to continually assess standards of service compliance for pressure and reduce the impact of network events, such as mains bursts, on customers. A case study is presented here that shows how an online modelling system can give timely warning of changes from normal network operation, providing capacity to minimise customer impact.


Electronics ◽  
2020 ◽  
Vol 9 (4) ◽  
pp. 665
Author(s):  
Antonio Furtado ◽  
Rodolfo Oliveira ◽  
Luis Bernardo ◽  
Rui Dinis

Decentralized wireless networks are gaining increasing popularity as they do not need a fixed infrastructure. Simultaneously, multiple research initiatives have led to different findings at the PHY layer of the wireless communication systems, which include Multi-Packet Reception (MPR) techniques that enable a receiver to decode multiple packets that are transmitted simultaneously. However, the distributed nature of decentralized wireless networks demands different network control policies that should take into account the MPR capabilities to increase the network performance. This work studies the performance of a wireless network composed of multiple transmitters that are willing to transmit to a single receiver. This receiver has MPR capability and adopts an Energy-based Sensing (EBS) technique to enable uplink users’ transmissions without interfering with the ongoing transmissions from other transmitters. The first remark to be made is that the MPR technique performance depends on the channel propagation conditions and on the amount of time the receiver needs to detect the spectrum’s occupancy state. However, it is shown that by increasing the number of samples needed to increase the sensing accuracy, the receiver may degrade its throughput, namely if the receiver is equipped with a single radio, that is sequentially used for sensing and transmitting (split-phase operation). The results presented in the paper show the impact of the channel propagation condition and EBS parameterization on wireless network throughput and the cases where the receiver MPR capture performance is greatly improved by the use of a spectrum sensing technique.


2021 ◽  
Author(s):  
◽  
Refik Ustok

<p>The Shannon capacity of wireless networks has a fundamental importance for network information theory. This area has recently seen remarkable progress on a variety of problems including the capacity of interference networks, X networks, cellular networks, cooperative communication networks and cognitive radio networks. While each communication scenario has its own characteristics, a common reason of these recent developments is the new idea of interference alignment. The idea of interference alignment is to consolidate the interference into smaller dimensions of signal space at each receiver and use the remaining dimensions to transmit the desired signals without any interference. However, perfect alignment of interference requires certain assumptions, such as perfect channel state information at transmitter and receiver, perfect synchronization and feedback. Today’s wireless communication systems, on the other and, do not encounter such ideal conditions. In this thesis, we cover a breadth of topics of interference alignment and cancellation schemes in wireless communication systems such as multihop relay networks, multicell networks as well as cooperation and optimisation in such systems. Our main contributions in this thesis can be summarised as follows:  • We derive analytical expressions for an interference alignment scheme in a multihop relay network with imperfect channel state information, and investigate the impact of interference on such systems where interference could accumulate due to the misalignment at each hop.  • We also address the dimensionality problem in larger wireless communication systems such as multi-cellular systems. We propose precoding schemes based on maximising signal power over interference and noise. We show that these precoding vectors would dramatically improve the rates for multi-user cellular networks in both uplink and downlink, without requiring an excessive number of dimensions. Furthermore, we investigate how to improve the receivers which can mitigate interference more efficiently.  • We also propose partial cooperation in an interference alignment and cancellation scheme. This enables us to assess the merits of varying mixture of cooperative and non-cooperative users and the gains achievable while reducing the overhead of channel estimation. In addition to this, we analytically derive expressions for the additional interference caused by imperfect channel estimation in such cooperative systems. We also show the impact of imperfect channel estimation on cooperation gains.  • Furthermore, we propose jointly optimisation of interference alignment and cancellation for multi-user multi-cellular networks in both uplink and downlink. We find the optimum set of transceivers which minimise the mean square error at each base station. We demonstrate that optimised transceivers can outperform existing interference alignment and cancellation schemes.  • Finally, we consider power adaptation and user selection schemes. The simulation results indicate that user selection and power adaptation techniques based on estimated rates can improve the overall system performance significantly.</p>


Sign in / Sign up

Export Citation Format

Share Document