scholarly journals Relation between indoor thermal environment and renovation in liege residential buildings

2014 ◽  
Vol 18 (3) ◽  
pp. 889-902 ◽  
Author(s):  
Manoj Singh ◽  
Sadhan Mahapatra ◽  
Jacques Teller

Indoor thermal environment monitoring has been done in 20 residential buildings of Liege city followed by questionnaire based comfort survey amongst the occupants of 85 houses in order to record their preference and expectations about indoor thermal environment in winter and spring season. It is found from the analysis that change of glazing has a minimum or even sometimes an adverse effect on the existing indoor environment due to the absence of proper insulation of the rest of the building envelope. It is observed that in winter there is a sudden drop in indoor temperature and also overheating in summer. This is due to unplanned installation of glazing which actually increases the fenestration area ratio leading to higher indoor temperature fluctuation and causes discomfort. It is also important that the occupant?s preference and expectations as well as overall assessment of indoor environment needs to be consider towards energy efficiency improvement.

2011 ◽  
Vol 255-260 ◽  
pp. 1632-1638 ◽  
Author(s):  
Li Ping Li

Field tests for indoor thermal environment of Tibetan-style dwellings of different materials in Shangri-La in winter were carried out from the perspective of physical environment of buildings, and more specifically, the indoor temperature of Tibetan-style dwellings with rammed earth walls and brick walls as well as the surface temperature of building envelope were tested and comparatively analyzed. The test results show the current situations and features of indoor temperature changes of Tibetan-style dwellings of different materials, which may provide a basis for improving the thermal environment of Tibetan-style dwellings.


2013 ◽  
Vol 651 ◽  
pp. 466-469
Author(s):  
Li Ping Li ◽  
He Wang ◽  
Shuai Fan

Field tests for indoor thermal environment of Tibetan-style timber dwellings in Shangri-La were carried out, from the perspective of physical environment of buildings, and more specifically, the indoor temperature of Tibetan-style timber dwellings as well as the surface temperature of building envelope were tested and comparatively analyzed. The test results show the current situations and features of indoor temperature changes of Tibetan-style timber dwellings, which may provide a basis for improving the thermal environment of Tibetan-style dwellings.


2011 ◽  
Vol 280 ◽  
pp. 147-151 ◽  
Author(s):  
Hong Guo ◽  
Min Fang Su ◽  
Xiao Jun Jin

Based on the current energy consumption situation of existing masonry-concrete residential buildings in China, it discussed the main energy-saving renovation policies and technologies. Taking existing masonry-concrete residential building of Taiyuan city as a case, it analyzed its heat loss situations, energy-saving renovation design and reconstruction technologies of building envelope. It discussed energy-saving renovation effects. Energy efficiency and indoor thermal environment improved significantly after energy-saving renovation. The building life is extended.


2010 ◽  
Vol 29-32 ◽  
pp. 2785-2788
Author(s):  
Jian Yao ◽  
Jin Xu

To compare the indoor thermal environment under different building envelope constructions, a Matlab-based tool was presented for building envelope performance simulation. An application study of two cases illustrates energy efficient buildings can provide more suitable indoor environment than non-energy efficient buildings in cold winter and hot summer. In conclusion, this paper provides a new and fast way for the prediction of indoor thermal environment.


2012 ◽  
Vol 450-451 ◽  
pp. 969-973
Author(s):  
Li Ping Li

Field tests for indoor thermal environment of dwellings of different renewable materials under different geographical climate conditions were carried out, and more specifically, the indoor temperature of dwellings with different renewable material walls as well as the surface temperature of building envelope were tested and comparatively analyzed. The test results show the current situations and features of indoor temperature changes of the dwellings of different materials, which may provide a basis for improving the thermal environment of dwellings.


2014 ◽  
Vol 10 (1) ◽  
pp. 172-183 ◽  
Author(s):  
Sushil B. Bajracharya

This paper seeks to investigate into the aspects of thermal performance of traditional residential buildings in traditional settlements of Kathmandu valley. This study proceeds to analyze the detailed field data collected, with a view to identify the indoor thermal environment with respect to outdoor thermal environment in different seasons. This paper also compares the thermal performance of traditional buildings with modern residential buildings of traditional settlements of the valley. There is a regression analysis to obtain information about the thermal environment of different traditional and modern residential buildings with different conditions. The paper concludes that, thermal performance of traditional residential building, adapted in various ways to the changing thermal regime for thermal comfort is better than that of contemporary buildings.DOI: http://dx.doi.org/10.3126/jie.v10i1.10898Journal of the Institute of Engineering, Vol. 10, No. 1, 2014,  pp. 172–183


2020 ◽  
Vol 15 (3) ◽  
pp. 163-170
Author(s):  
Rajan KC ◽  
Hom Bahadur Rijal ◽  
Masanori Shukuya ◽  
Kazui Yoshida

The energy use in residential dwellings has been increasing due to increasing use of modern electric appliances to make the lifestyle easier, entertaining and better. One of the major purposes of indoor energy use is for improving indoor thermal environment for adjusting thermal comfort. Along with the use of passive means like the use of mechanical devices, the occupants in any dwellings use active means such as the use of natural ventilation, window opening, and clothing adjustment. In fact, the use of active means when the outdoor environment is good enough might be more suitable to improve indoor thermal environment than the use of mechanical air conditioning units, which necessarily require electricity. Therefore, the people in developing countries like Nepal need to understand to what extent the occupants can use active means to manage their own indoor thermal comfort. The use of active means during good outdoor environment might be an effective way to manage increasing energy demand in the future. We have made a field survey on the occupants’ adaptive behaviors for thermal comfort in a Japanese condominium equipped with Home Energy Management System (HEMS). Online questionnaire survey was conducted in a condominium with 356 families from November 2015 to October 2016 to understand the occupants’ behaviors. The number of 17036 votes from 39 families was collected. The indoor air temperature, relative humidity and illuminance were measured at the interval of 2-10 minutes to know indoor thermal environmental conditions. The occupants were found using different active behaviors for thermal comfort adjustments even in rather harsh summer and winter. Around 80% of the occupants surveyed opened windows when the outdoor air temperature was 30⁰C in free running (FR) mode and the clothing insulation was 0.93 clo when the outdoor air temperature was 0⁰C. The result showed that the use of mechanical heating and cooling was not necessarily the first priority to improve indoor thermal environment. Our result along with other results in residential buildings showed that the adaptive behaviors of the occupants are one of the primary ways to adjust indoor thermal comfort. This fact is important in enhancing the energy saving building design.


2020 ◽  
Vol 10 (5) ◽  
pp. 1801 ◽  
Author(s):  
Radostina A. Angelova ◽  
Rositsa Velichkova

There are different actors in an operating room (OR), who have controversial requirements for the indoor thermal environment. While the patient is at risk of perioperative hypothermia, the surgeons are in a state of thermophysiological discomfort. The study presents an analysis of the thermophysiological comfort of both patient and surgeons in an OR. Surgical clothing ensembles with three values of clothing insulation are simulated. Different indoor environment conditions (air temperature and relative humidity) are tested. The analysis is based on the calculation of predicted mean vote and predicted percentage of dissatisfied (PMV-PPD) indexes and assessment of the climatic conditions categories. Discussion of the predicted heat strain is also presented. The simulated results and their analysis show considerable discrepancies between the thermophysiological comfort of the patient and the surgeons, even when dressed in a light protective ensemble, in the same indoor environment.


Sign in / Sign up

Export Citation Format

Share Document