scholarly journals Thermophysiological Comfort of Surgeons and Patient in an Operating Room Based on PMV-PPD and PHS Indexes

2020 ◽  
Vol 10 (5) ◽  
pp. 1801 ◽  
Author(s):  
Radostina A. Angelova ◽  
Rositsa Velichkova
Keyword(s):  
At Risk ◽  
Relative Humidity ◽  
Operating Room ◽  
Air Temperature ◽  
Indoor Environment ◽  
Thermal Environment ◽  
Climatic Conditions ◽  
Clothing Insulation ◽  
Indoor Thermal Environment ◽  
Predicted Heat Strain

There are different actors in an operating room (OR), who have controversial requirements for the indoor thermal environment. While the patient is at risk of perioperative hypothermia, the surgeons are in a state of thermophysiological discomfort. The study presents an analysis of the thermophysiological comfort of both patient and surgeons in an OR. Surgical clothing ensembles with three values of clothing insulation are simulated. Different indoor environment conditions (air temperature and relative humidity) are tested. The analysis is based on the calculation of predicted mean vote and predicted percentage of dissatisfied (PMV-PPD) indexes and assessment of the climatic conditions categories. Discussion of the predicted heat strain is also presented. The simulated results and their analysis show considerable discrepancies between the thermophysiological comfort of the patient and the surgeons, even when dressed in a light protective ensemble, in the same indoor environment.

scholarly journals Thermal environment of masonry-walled poultry house in the initial life stage of broilers

2019 ◽  
Vol 23 (3) ◽  
pp. 203-208
Author(s):  
Diogo J. de R. Coelho ◽  
Ilda F. F. Tinôco ◽  
Cecília F. Souza ◽  
Fátima J. F. Baptista ◽  
Matteo Barbari ◽  
...  
Keyword(s):  
Relative Humidity ◽  
Air Temperature ◽  
Indoor Environment ◽  
Thermal Environment ◽  
Life Stage ◽  
Ventilation System ◽  
Concrete Block ◽  
Masonry Wall ◽  
Full Time ◽  
Poultry House

ABSTRACT The aim of this study was to monitor and evaluate the thermal environment and undertake a complete mapping of the variables air temperature, air relative humidity, and temperature-humidity index for broilers. The research was conducted during the winter, in Brazil, in a commercial poultry house fully walled with concrete-block masonry, equipped with a full-time negative-pressure mechanized ventilation system and indoor-environment air heating by a wood-burning furnace located outside the facility. The shed was fully automated and housed 30,000 birds at a density of 15 birds m-2. Thermal-environment data analysis revealed that the masonry-wall model did not ensure homogeneous thermal distribution within the poultry house, with the central region showing the highest air temperature and lowest air relative humidity values. The indoor environment did not provide thermal comfort to the housed birds, which were under thermal discomfort in certain situations in some internal regions of the shed.

scholarly journals A Field Study on the Indoor Thermal Environment of the Airport Terminal in Tibet Plateau in Winter

2017 ◽  
Vol 2017 ◽  
pp. 1-13 ◽  
Author(s):  
Jianglong Zhen ◽  
Jun Lu ◽  
Guangqin Huang ◽  
Liyue Zeng ◽  
Jianping Lin ◽  
...  
Keyword(s):  
Relative Humidity ◽  
Thermal Environment ◽  
Vertical Direction ◽  
Outer Zone ◽  
Tibet Plateau ◽  
Indoor Thermal Environment ◽  
Airport Terminal ◽  
Globe Temperature ◽  
Environment Parameters ◽  
Radiant Floor Heating

In order to study the characteristics of indoor thermal environment in the airport terminal in Tibet Plateau with radiant floor heating in winter, a field measurement of the indoor thermal environment was conducted in Lhasa Gonggar Airport terminal 2. First, the unique climate characteristics in Tibet Plateau were analyzed through comparison of meteorological parameters in Beijing and Lahsa. The thermal environment in the terminal was divided into outer zone and inner zone as well as south zone and north zone. Thermal environment parameters including air temperature, black globe temperature, relative humidity in each zone, and inner surface temperature of envelope were measured and analyzed. Meanwhile, temperature and relative humidity in the vertical direction were measured. In addition, PMV and PPD were calculated for evaluating the thermal environment in the terminal. The findings can provide guidance for the design and regulation of thermal environment in terminals in Tibet Plateau in China.

scholarly journals Energy-saving potential of intermittent heating system: Influence of composite phase change wall and optimization strategy

2020 ◽  
pp. 014459872096921
Author(s):  
Yanru Li ◽  
Enshen Long ◽  
Lili Zhang ◽  
Xiangyu Dong ◽  
Suo Wang
Keyword(s):  
Energy Consumption ◽  
Thermal Comfort ◽  
Phase Change ◽  
Air Temperature ◽  
Indoor Air ◽  
Thermal Environment ◽  
Optimization Strategy ◽  
Indoor Thermal Environment ◽  
Indoor Thermal Comfort ◽  
Intermittent Heating

In the Yangtze River zone of China, the heating operation in buildings is mainly part-time and part-space, which could affect the indoor thermal comfort while making the thermal process of building envelope different. This paper proposed to integrate phase change material (PCM) to building walls to increase the indoor thermal comfort and attenuate the temperature fluctuations during intermittent heating. The aim of this study is to investigate the influence of this kind of composite phase change wall (composite-PCW) on the indoor thermal environment and energy consumption of intermittent heating, and further develop an optimization strategy of intermittent heating operation by using EnergyPlus simulation. Results show that the indoor air temperature of the building with the composite-PCW was 2–3°C higher than the building with the reference wall (normal foamed concrete wall) during the heating-off process. Moreover, the indoor air temperature was higher than 18°C and the mean radiation temperature was above 20°C in the first 1 h after stopping heating. Under the optimized operation condition of turning off the heating device 1 h in advance, the heat release process of the composite-PCW to the indoor environment could maintain the indoor thermal environment within the comfortable range effectively. The composite-PCW could decrease 4.74% of the yearly heating energy consumption compared with the reference wall. The optimization described can provide useful information and guidance for the energy saving of intermittently heated buildings.

scholarly journals Importance of Behavioral Adjustments for Adaptive Thermal Comfort in a Condominium with HEMS System

2020 ◽  
Vol 15 (3) ◽  
pp. 163-170
Author(s):  
Rajan KC ◽  
Hom Bahadur Rijal ◽  
Masanori Shukuya ◽  
Kazui Yoshida
Keyword(s):  
Thermal Comfort ◽  
Air Temperature ◽  
Energy Use ◽  
Thermal Environment ◽  
Residential Buildings ◽  
Outdoor Environment ◽  
Adaptive Behaviors ◽  
Outdoor Air ◽  
Indoor Thermal Environment ◽  
Indoor Thermal Comfort

The energy use in residential dwellings has been increasing due to increasing use of modern electric appliances to make the lifestyle easier, entertaining and better. One of the major purposes of indoor energy use is for improving indoor thermal environment for adjusting thermal comfort. Along with the use of passive means like the use of mechanical devices, the occupants in any dwellings use active means such as the use of natural ventilation, window opening, and clothing adjustment. In fact, the use of active means when the outdoor environment is good enough might be more suitable to improve indoor thermal environment than the use of mechanical air conditioning units, which necessarily require electricity. Therefore, the people in developing countries like Nepal need to understand to what extent the occupants can use active means to manage their own indoor thermal comfort. The use of active means during good outdoor environment might be an effective way to manage increasing energy demand in the future. We have made a field survey on the occupants’ adaptive behaviors for thermal comfort in a Japanese condominium equipped with Home Energy Management System (HEMS). Online questionnaire survey was conducted in a condominium with 356 families from November 2015 to October 2016 to understand the occupants’ behaviors. The number of 17036 votes from 39 families was collected. The indoor air temperature, relative humidity and illuminance were measured at the interval of 2-10 minutes to know indoor thermal environmental conditions. The occupants were found using different active behaviors for thermal comfort adjustments even in rather harsh summer and winter. Around 80% of the occupants surveyed opened windows when the outdoor air temperature was 30⁰C in free running (FR) mode and the clothing insulation was 0.93 clo when the outdoor air temperature was 0⁰C. The result showed that the use of mechanical heating and cooling was not necessarily the first priority to improve indoor thermal environment. Our result along with other results in residential buildings showed that the adaptive behaviors of the occupants are one of the primary ways to adjust indoor thermal comfort. This fact is important in enhancing the energy saving building design.

scholarly journals Relation between energy use and indoor thermal environment in animal husbandry: a case study

2019 ◽  
Vol 111 ◽  
pp. 01042
Author(s):  
Matteo Bilardo ◽  
Lorenzo Comba ◽  
Paolo Cornale ◽  
Andrea Costantino ◽  
Enrico Fabrizio
Keyword(s):  
Relative Humidity ◽  
Animal Welfare ◽  
Thermal Environment ◽  
Animal Husbandry ◽  
Electrical Energy ◽  
Indoor Climate ◽  
Climate Conditions ◽  
Indoor Thermal Environment ◽  
Data Loggers ◽  
Energy Consumptions

Climate control is of the foremost importance in structures for intensive animal rearing because many animals (e.g. pigs and broilers) tolerate a small range of climate conditions (mainly air temperature and relative humidity) that may differ considerably from the outdoor environment. For this reason, the indoor climate in the majority of structures for animal husbandry is guaranteed by HVAC systems. On the one hand, the use of mechanical systems makes it possible to avoid production risks due to the unpredictability of the outdoor weather conditions and to maximize the feed efficiency, with positive effects on both the animal welfare and farm profit. On the other hand, the use of HVAC entails not negligible thermal and electrical energy consumptions. In literature, few data about the real thermo-hygrometric conditions and energy consumption of animal houses are present. In this work (in the framework of the EPAnHaus – Energy Performance certification of Animal Houses –project), the results obtained from a long-term monitoring campaign in two growing-finishing pig houses are presented. The performed measurements concerned environmental parameters and electrical power that were acquired during two production cycles (warm and cool seasons). For the environmental monitoring, both the buildings were equipped with temperature and relative humidity sensors embedded in portable data loggers (10 minutes logging time) that were placed in various spots inside the houses. Outdoor data were obtained through a weather station located near the test site. Concerning the energy monitoring, power transducers connected to portable data loggers (10 seconds logging time) were placed in the electric panel of each house to log the electrical energy consumptions due to ventilation, lighting and automatic feeding. The acquired data were used for carrying out analysis concerning the indoor thermal environment, its characterization in relation with the animal welfare, the electrical energy uses and the existing relations between all these aspects. The obtained data were used to evaluate the effectiveness of the HVAC system in guaranteeing the adequate indoor climate conditions (avoiding heat/cold stress conditions) and to identify electrical energy uses.

scholarly journals Reconstruction and optimization methods of old university teaching buildings

2020 ◽  
Vol 165 ◽  
pp. 04033
Author(s):  
Shao Siyu
Keyword(s):  
Indoor Environment ◽  
Thermal Environment ◽  
Optimization Methods ◽  
Energy Allocation ◽  
University Teaching ◽  
Teaching Mode ◽  
Modern Education ◽  
Indoor Thermal Environment ◽  
Existing Problems ◽  
Aging Phenomenon

This paper mainly studies the reconstruction of the old teaching building in China. There are many buildings in our country, aging phenomenon is serious, indoor teaching mode is not suitable for modern education. Through the analysis of the main existing problems of indoor environment, the paper puts forward the suitable renovation scheme from the aspects of energy allocation, indoor thermal environment and comfort, so as to make the teaching building suitable for the use of modern education.

Study on Improving Thermal Environment of College Dormitory in Chongqing

2012 ◽  
Vol 610-613 ◽  
pp. 2849-2853
Author(s):  
Hong Yin Ou ◽  
Fang Liu ◽  
Qing Long Song ◽  
Long Xing Yu
Keyword(s):  
Field Test ◽  
Indoor Environment ◽  
Thermal Environment ◽  
Air Velocity ◽  
Thermal Discomfort ◽  
Indoor Thermal Environment ◽  
Simulation Results

To improve the low air velocity above the bed areas during the night in hot summer, the reformed plan for the college dormitory fan was presented.The indoor environment was simulated by the software Airpak3.0 to compaire the fan with both no diversion deflector and diversion deflector (the deflector angles are 60°, 120° and 160°) respectively. And a field test was conducted to confirm the simulation results. The results show that the indoor thermal environment above the bed areas has been improved inordinately if adding a deflector with different angles. The air velocity can be increased by 0.15m/s at most when the deflector angle is 160°, yet the airflow displays most evenly with the 120° deflector angle. Meanwhile, the temperature and thermal discomfort have been decreased. The variation of the simulation and measurement values tends to be consistent, so it suggests the fan installing the diversion deflector may improve the thermal environment of college dormitory.

The Thermal Comfort of Sedentary Workers

1987 ◽  
Vol 1 (2) ◽  
pp. 74-77 ◽  
Author(s):  
S C Foo ◽  
WO Phoon
Keyword(s):  
Thermal Comfort ◽  
Air Temperature ◽  
Thermal Environment ◽  
Thermal Sensation ◽  
Tropical Climate ◽  
Climatic Conditions ◽  
The Body ◽  
Office Workers ◽  
Preferred Temperature

Two hundred and eighty-five Office workers were surveyed and the micro-climatic conditions in which they worked were measured to evaluate their preferred temperature. About 78% of workers considered the natural tropical climate uncomfortable. However, 76% to 87% of workers in airconditioned Offices approved of their thermal environment if its temperature ranged from 21°C to 27°C. Many workers who felt that the temperature produced a neutral thermal sensation in the body as a whole, tended to complain that their heads were too warm and at the same time their limbs too cool. About 60% of workers in airconditioned Offices were exposed to an air temperature of less than 24°C. Present data suggest that an air temperature of 27°C would be comfortable for more than 80% of workers.

Sign in / Sign up

Export Citation Format

Share Document