scholarly journals Impact assessment of concentrate recirculation on the landfill gas production

2016 ◽  
Vol 20 (4) ◽  
pp. 1283-1294 ◽  
Author(s):  
Nikola Dzolev ◽  
Goran Vujic
Keyword(s):  
Gas Flow ◽  
Landfill Gas ◽  
Gas Production ◽  
Gas Composition ◽  
Methane Generation ◽  
Reverse Osmosis Plant ◽  
To Come ◽  
The Impact ◽  
Real Scale ◽  
Research Show

This paper explores the impact of concentrate recirculation, as a product of leachate treated by reverse osmosis plant, on the production of landfill gas at the real-scale landfill for municipal solid waste. In an effort to come up with results experimental measurements were carried out at the landfill in Bijeljina. All measurements performed, were divided into 3 groups. The aims of two groups of measurement were to determine landfill gas and methane yield from concentrate and leachate in laboratory conditions (1st group) and to find out concentrations of oxidizing matters (COD and BOD5) present in leachate and concentrate at different points of treatment as well as its variability over the time (2nd group) which could be used to calculate the potential of landfill gas and methane generation from concentrate by recirculation, theoretically. 3rd group of measurements, carried out in parallel, have goal to determine the quality and quantity of the collected landfill gas at wells throughout the landfill. The results of analysis carried out in this experimental research show the clear evidence of concentrate recirculation impact on methane production by increasing the landfill gas flow, as well as its concentration within the landfill gas composition, at the nearby well. Although results indicated relatively high impact of concentrate recirculation on landfill gas production, comparing to its theoretical potential, the influence on the landfill at whole, is negligible, due to relatively low volumes in recirculation with respect to its size and objectively low potential given by organic matter present in concentrate.

High Performance MEMS Thermal Gyroscope

2012 ◽  
Author(s):  
Nilgoon Zarei ◽  
Albert M. Leung ◽  
John D. Jones
Keyword(s):  
External Force ◽  
High Performance ◽  
Gas Flow ◽  
Element Model ◽  
Minimal Impact ◽  
Mems Gyroscope ◽  
Force Finding ◽  
Dimensional Finite Element ◽  
To Come ◽  
The Impact

This paper reports modeling a new design of Thermal MEMS gyroscope through the use of the Comsol Multiphysics software package. Being very small and having no movable parts have made thermal MEMS gyroscope very practical. Previously designed Thermal MEMS gyroscope shows some limitation such as being vulnerable to gravity force. Finding a technique to increase the range of thermal MEMS gyroscope reliability motivated us to come up with a new design that we will refer to as the ‘Forced Convection MEMS gyroscope’. A two-dimensional finite-element model of the device has been developed to investigate its performance. An external force has been introduced to the system to create a higher-velocity hot gas stream that will be deviated more in response to rotation. The external force should be great enough that convection currents resulting from gravity or acceleration will have minimal impact on the gyroscope sensitivity. A heating element can still be used, but its primary purpose is now to warm the flowing gas so that it can be detected by the sensors. In this paper we will also show that, in order to completely eliminate the impact of gravity and increase the sensitivity of the gyroscope, it is possible to eliminate the heaters entirely and instead use heated sensors to detect gas currents. In other words, the sensors are working as hot-wire anemometers. Our simulations suggest that this design variant results in higher sensitivity. We have also carried out optimization studies to identify the best location for the heaters and sensors. A prototype of this device has been fabricated based on MEMS techniques, and an external pump is used to produce an oscillating gas flow within the device.

scholarly journals Numerical Simulation of Shale Gas Multiscale Seepage Mechanism-Coupled Stress Sensitivity

2019 ◽  
Vol 2019 ◽  
pp. 1-13 ◽  
Author(s):  
Xun Yan ◽  
Jing Sun ◽  
Dehua Liu
Keyword(s):  
Shale Gas ◽  
Gas Flow ◽  
Gas Transport ◽  
Sensitivity Coefficient ◽  
Stress Sensitivity ◽  
Gas Production ◽  
Molecular Flow ◽  
Adsorption Phenomenon ◽  
Gas Seepage ◽  
The Impact

The complexity of the gas transport mechanism in microfractures and nanopores is caused by the feature of multiscale and multiphysics. Figuring out the flow mechanism is of great significance for the efficient development of shale gas. In this paper, an apparent permeability model which covers continue, slip, transition, and molecular flow and geomechanical effect was presented. Additionally, a mathematical model comprising multiscale, geomechanics, and adsorption phenomenon was proposed to characterize gas flow in the shale reservoir. The aim of this paper is to investigate some important impacts in the process of gas transportation, which includes the shale stress sensitivity, adsorption phenomenon, and reservoir porosity. The results reveal that the performance of the multistage fractured horizontal well is strongly influenced by stress sensitivity coefficient. The cumulative gas production will decrease sharply when the shale gas reservoir stress sensitivity coefficient increases. In addition, the adsorption phenomenon has an influence on shale gas seepage and sorption capacity; however, the effect of adsorption is very weak in the early gas transport period, and the impact of later will increase. Moreover, shale porosity also greatly affects the shale gas transportation.

scholarly journals Material Screening for Gas Sensing using an Electronic Nose: Gas Sorption Thermodynamic and Kinetic Considerations

2021 ◽  
Author(s):  
Ashwin Kumar Rajagopalan ◽  
Camille Petit
Keyword(s):  
Electronic Nose ◽  
Gas Flow ◽  
Sensor Array ◽  
Thermodynamic Characteristics ◽  
Material System ◽  
Gas Composition ◽  
Kinetic Characteristics ◽  
Gas Sorption ◽  
The Impact ◽  
Material Screening

To detect multiple gases in a mixture, one must employ an electronic nose or sensor array, composed of several materials as a single material cannot resolve all the gases in a mixture accurately. Given the many candidate materials, choosing the right combination of materials to be used in an array is a challenging task. In a sensor whose sensing mechanism depends on a change in mass upon gas adsorption, both the equilibrium and kinetic characteristics of the gas-material system dictate the performance of the array. The overarching goal of this work is two-fold. First, we aim to highlight the impact of thermodynamic characteristics of gas-material combination on array performance and to develop a graphical approach to rapidly screen materials. Second, we aim to highlight the need to incorporate the gas sorption kinetic characteristics to provide an accurate picture of the performance of a sensor array. To address these goals, we have developed a computational test bench that incorporates a sensor model and a gas composition estimator. To provide a generic study, we have chosen, as candidate materials, hypothetical materials that exhibit equilibrium characteristics similar to metal organic frameworks (MOFs). Our computational studies led to key learnings, namely: (1) exploit the shape of the sensor response as a function of gas composition for material screening purposes for gravimetric arrays; (2) incorporate both equilibrium and kinetics for gas composition estimation in a dynamic system; and (3) engineer the array by accounting for the kinetics of the materials, the feed gas flow rate, and the size of the device.

Variable Inlet Guide Vane Losses and Their Effect on Downstream Impeller and Diffuser in Wet Gas Flow

2017 ◽  
Author(s):  
Levi André B. Vigdal ◽  
Lars E. Bakken
Keyword(s):  
Gas Flow ◽  
Oil And Gas ◽  
Guide Vane ◽  
Gas Production ◽  
Test Facility ◽  
Innovative Technology ◽  
Inlet Guide Vane ◽  
Oil And Gas Production ◽  
Wet Gas ◽  
The Impact

Adopting the innovative technology found in a compressor able to compress a mixture of natural gas and condensate has great potential for meeting future challenges in subsea oil and gas production. Benefits include reduced size, complexity and cost, enhanced well output, longer producing life and increased profits, which in turn offer opportunities for exploiting smaller oil and gas discoveries or extending the commercial life of existing fields. Introducing liquid into a centrifugal compressor creates several thermodynamic and fluid-mechanical challenges. The paper reviews some of the drive mechanisms involved in wet gas compression and views them in the context of the test results presented. An inlet guide vane (IGV) assembly has been installed in a test facility for wet gas compressors and the effect of wet gas on IGV performance documented. The impact of changes in IGV performance on impeller and diffuser has also been documented. The results have been discussed and correction methods compared.

scholarly journals Material Screening for Gas Sensing using an Electronic Nose: Gas Sorption Thermodynamic and Kinetic Considerations

2021 ◽  
Author(s):  
Ashwin Kumar Rajagopalan ◽  
Camille Petit
Keyword(s):  
Electronic Nose ◽  
Gas Flow ◽  
Sensor Array ◽  
Thermodynamic Characteristics ◽  
Material System ◽  
Gas Composition ◽  
Kinetic Characteristics ◽  
Gas Sorption ◽  
The Impact ◽  
Material Screening

To detect multiple gases in a mixture, one must employ an electronic nose or sensor array, composed of several materials as a single material cannot resolve all the gases in a mixture accurately. Given the many candidate materials, choosing the right combination of materials to be used in an array is a challenging task. In a sensor whose sensing mechanism depends on a change in mass upon gas adsorption, both the equilibrium and kinetic characteristics of the gas-material system dictate the performance of the array. The overarching goal of this work is two-fold. First, we aim to highlight the impact of thermodynamic characteristics of gas-material combination on array performance and to develop a graphical approach to rapidly screen materials. Second, we aim to highlight the need to incorporate the gas sorption kinetic characteristics to provide an accurate picture of the performance of a sensor array. To address these goals, we have developed a computational test bench that incorporates a sensor model and a gas composition estimator. To provide a generic study, we have chosen, as candidate materials, hypothetical materials that exhibit equilibrium characteristics similar to metal organic frameworks (MOFs). Our computational studies led to key learnings, namely: (1) exploit the shape of the sensor response as a function of gas composition for material screening purposes for gravimetric arrays; (2) incorporate both equilibrium and kinetics for gas composition estimation in a dynamic system; and (3) engineer the array by accounting for the kinetics of the materials, the feed gas flow rate, and the size of the device.

EDFM-based Multi-Continuum Shale Gas Simulation with Low Velocity Non-Darcy Water Flow Effect

2021 ◽  
Author(s):  
Yu Jiang ◽  
John Killough ◽  
Linkai Li ◽  
Xiaona Cui ◽  
Jin Tang
Keyword(s):  
Water Flow ◽  
Shale Gas ◽  
Gas Flow ◽  
Early Stage ◽  
Knudsen Diffusion ◽  
Gas Production ◽  
Darcy Flow ◽  
Low Velocity ◽  
Water Imbibition ◽  
The Impact

Abstract The exploitation of shale gas has attracted extensive attention in industry and academia. Multi-scale gas transportation mechanisms in matrix and fractures have been well studied. However, due to the presence of water originating from both fracking fluids and connate water, shale gas production is also greatly affected by water imbibition and flowback, of which the processes have not been thoroughly analyzed. This paper aims at presenting a comprehensive multi-continuum multi-component model to characterize the complicated shale gas flow behaviors as well as the impact of non-Darcy water flow on shale gas production. A two-phase numerical simulator is built up with multi-continuum settings. Shale matrix is split into organic and inorganic matters while natural and hydraulic fractures are modeled using an embedded discrete fracture model (EDFM). Fracture closure and elongation are modeled using a dynamic gridding approach. Different transportation mechanisms are considered to describe gas flow in shale, including Knudsen diffusion, ab/desorption, and convection. The low-velocity non-Darcy flow of water is used in inorganic pores to analyze the effect of water flow. A pre-stage model based on pumping history is simulated firstly before production starts. This serves as an initialization step to model fracking fluid imbibition and early-stage water flowback. This pre-stage simulation gives out more precise pressure and saturation profiles than the conventional non-equilibrium initialization method, especially in enhanced pore volumes and fractures. Based upon simulation results from the production period, Langmuir isotherm absorption has shown a massive impact on gas flow in shale, and Knudsen diffusion weights highest among transport mechanisms. Water non-Darcy flow better benefits in simulating both early-stage water flowback and production process compared with Darcy flow, which gives us a new explanation on the low flowback efficiency in real shale gas operations. Studies on early-stage water flowback also show that the flowback affects saturation distribution, which has a strong relationship with gas production and shall not be ignored. This work establishes a novel method to simulate and analyze shale gas production. It considers multiple and complex flow mechanisms and gives out better estimates of water flux. It is also used to initialize a model for pumping water imbibition and early-stage flowback, which can be used as technical resources for analyzing and simulating unconventional plays.

scholarly journals The Impact of the Geometry of the Effective Propped Volume on the Economic Performance of Shale Gas Well Production

Energies ◽  
2021 ◽  
Vol 14 (9) ◽  
pp. 2475
Author(s):  
Andres Soage ◽  
Ruben Juanes ◽  
Ignasi Colominas ◽  
Luis Cueto-Felgueroso
Keyword(s):  
Shale Gas ◽  
Economic Performance ◽  
Gas Flow ◽  
Gas Production ◽  
Gas Industry ◽  
Well Production ◽  
Relative Contribution ◽  
Decline Curves ◽  
Technological Developments ◽  
The Impact

We analyze the effect that the geometry of the Effective Propped Volume (EPV) has on the economic performance of hydrofractured multistage shale gas wells. We study the sensitivity of gas production to the EPV’s geometry and we compare it with the sensitivity to other parameters whose relevance in the production of shale gas is well known: porosity, kerogen content and permeability induced in the Stimulated Recovery Volume (SRV). To understand these sensitivities, we develop a high-fidelity 3D numerical model of shale gas flow that allows determining both the Estimated Ultimate Recovery (EUR) of gas as well as analyzing the decline curves of gas production (DCA). We find that the geometry of the EPV plays an important role in the economic performance and gas production of shale wells. The relative contribution of EPV geometry is comparable to that of induced permeability of the SRV or formation porosity. Our results may lead to interesting technological developments in the oild and gas industry that improve economic efficiency in shale gas production.

Increased Stability of Anaerobic Digestion by Controlled Recirculation

1991 ◽  
Vol 23 (7-9) ◽  
pp. 1229-1237
Author(s):  
Chaio-Fuei Ouyang ◽  
Tain-Gen Chang
Keyword(s):  
Substantial Reduction ◽  
Gas Production ◽  
Digested Sludge ◽  
Significant Saving ◽  
Methane Generation ◽  
Sludge Digestion ◽  
Solids Concentration ◽  
Secondary Sludge ◽  
Sludge Recycling ◽  
Growth System

The treatment characteristics of municipal sludge were investigated by the anaerobic activated sludge digestion (AASD) system. This study used the suspended growth system and mesophilic temperature in the digestors and separators; the system achieves a more stable and improved process; such a process configuration offers the possibility of a substantial reduction in the total volume necessary for efficient stabilization. This study presents data indicating that the AASS system is feasible. In general, with an applied solids concentration of TS= 2%, the nonbiodegradable portion of the substrate concentration contained in the primary and secondary sludge was found to be 40.6% and 35.1% on the basis or TVS and COD, respectively. This study also provides evidence that the reactions at a recycling ratio of R=1 and R=3 are considerably more stable than those achieved in conventional or other recycling ratio digestors with a HRT of 9 days or longer. The gas production and bioactivity is also higher than that normally produced by the conventional single-stage digestion system. The experimental results also indicate that the dilution rate exceeds the maximum specific growth rate as the HRT is decreased from 9 days to 6 days. The significant saving in reactor volume and enhanced methane generation should offset the energy required for digested sludge recycling.

Fluxus and the Absurd (1961–62)

2017 ◽  
Author(s):  
Benjamin R. Levy
Keyword(s):  
Second Life ◽  
The Self ◽  
Major Work ◽  
The Future ◽  
To Come ◽  
The Impact

After John Cage’s 1958 Darmstadt lectures, many European composers developed an interest in absurdity and artistic provocation. Although Ligeti’s fascination with Cage and his association with the Fluxus group was brief, the impact it had on his composition was palpable and lasting. A set of conceptual works, The Future of Music, Trois Bagatelles, and Poème symphonique for one hundred metronomes, fall clearly into the Fluxus model, even as the last has taken on a second life as a serious work. This spirit, however, can also be seen in the self-satire of Fragment and the drama and irony of Volumina, Aventures, and Nouvelles Aventures. The sketches for Aventures not only show the composer channeling this humor into a major work but also prove to be a fascinating repository of ideas that Ligeti would reuse in the years to come.

scholarly journals Financing Growth through Remittances and Foreign Direct Investment: Evidences from Balkan Countries

2021 ◽  
Vol 14 (3) ◽  
pp. 117
Author(s):  
Esmeralda Jushi ◽  
Eglantina Hysa ◽  
Arjona Cela ◽  
Mirela Panait ◽  
Marian Catalin Voica
Keyword(s):  
Developing Economies ◽  
Central Banks ◽  
Sustainable Growth ◽  
Time Interval ◽  
Foreign Direct Investments ◽  
Factors Affecting ◽  
Balkan Countries ◽  
To Come ◽  
Sustainable Economic Growth ◽  
The Impact

The ultimate goal of central banks, worldwide, is to promote the foundations for sustainable economic growth. In the case of developing economies, in particular, such objective requires time, huge efforts, attention, and plenty of resources in order to be accomplished to the fullest degree. This paper thoroughly investigates key factors affecting Balkan countries’ economic development (as measured by gross domestic product (GDP) growth), focusing especially on the impact of remittances. The analysis was done over an 18-year time interval (2000–2017) and builds on 144 observations. The data figures were retrieved from the World Bank database while two dummies were created to test the impact of the last financial crisis (2008–2012). Econometric tools were employed to carry out a broad analysis on the interdependencies that exist and, in particular, to determine the role of remittance income on growth. The vector auto regressive model was estimated using EViews software, and was used to come up with relevant insights. Empirical findings suggest the following: population growth, remittances, and labor force participation are insignificant factors for sustainable growth. On the other hand, previous levels of GDP, trade, and foreign direct investments (FDIs) appear to be relevant for the predictor. This research provides up-to-date conclusions, which can be considered during the decision-making process of central banks, as well as by government policymakers.

Sign in / Sign up

Export Citation Format

Share Document