scholarly journals Flow Analysis of Powell-Eyring Fluid Over an Off-Centered Porous Rotating Disk

2018 ◽  
Vol 70 (1) ◽  
pp. 48-65
Author(s):  
Najeeb Alam Khan ◽  
Sidra Khan

Abstract This article presents the study of three-dimensional, stagnation flow of a Powell-Eyring fluid towards an off-centered rotating porous disk. A uniform injection or suction is applied through the surface of the disk. The Darcy law of porous disk for Powell-Eyring fluid is also obtained. The governing partial differential equations and their related boundary conditions are converted into ordinary differential equations by using a suitable similarity transformation. The analytical solution, of the system of equations is solved by using homotopy analysis method. The convergence region of the obtained solution is determined and plotted. The effects of rotational parameter, porosity of the medium, the characteristics of the non-Newtonian fluid and the suction or injection velocity on the velocity distributions is shown by graphical representation.

2016 ◽  
Vol 12 (2) ◽  
pp. 345-361 ◽  
Author(s):  
Najeeb Alam Khan ◽  
Sidra Khan ◽  
Fatima Riaz

Purpose – The purpose of this paper is to study the three dimensional, steady and incompressible flow of non-Newtonian rate type Maxwell fluid, for stagnation point flow toward an off-centered rotating disk. Design/methodology/approach – The governing partial differential equations are transformed to a system of non-linear ordinary differential equations by conventional similarity transformations. The non-perturbation technique, homotopy analysis method (HAM) is employed for the computation of solutions. And, the solution is computed by using the well-known software Mathematica 10. Findings – The effects of rotational parameter and Deborah number on radial, azimuthal and induced velocity functions are investigated. The results are presented in graphical form. The convergence control parameter is also plotted for velocity profiles. The comparison with the previous results is also tabulated. The skin friction coefficients are also computed for different values of Deborah number. Originality/value – This paper studies the effect of rotation and Deborah number on off-centered rotating disk has been observed and presented graphically.


2019 ◽  
Vol 11 (8) ◽  
pp. 168781401986975 ◽  
Author(s):  
Muhammad Jawad ◽  
Zahir Shah ◽  
Aurangzeb Khan ◽  
Saeed Islam ◽  
Hakeem Ullah

In the present study, the three-dimensional Darcy–Forchheimer magnetohydrodynamic thin-film nanofluid containing flow over an inclined steady rotating plane is observed. Nanofluid thin-film flows are taken thermally radiated and suction/injection effect is also considered. By similarity variables, the partial differential equations are transformed into a set of first-ordinary differential equations (ODES). By Homotopy Analysis Method, the required ODES is solved. The boundary layer over an inclined steady rotating plane is plotted and observed in detail for the velocity, [Formula: see text], and [Formula: see text] profiles. The influence of various embedded parameters such as variable thickness, [Formula: see text]Pr, and thermophoretic parameter on velocity, [Formula: see text], and [Formula: see text] profile. The influence of many parameters is explained by graphs for the velocity, [Formula: see text], and [Formula: see text]. The crucial terms of Nusselt number and Sherwood number have also been observed numerically and physically for [Formula: see text] and [Formula: see text]. Radiation phenomena is the cause of energy to the liquid system. For more rotation parameters, the thermal boundary-layer thickness is reduced.


2014 ◽  
Vol 2014 ◽  
pp. 1-7 ◽  
Author(s):  
Najeeb Alam Khan ◽  
Fatima Riaz

An investigation has been made to study the off-centered stagnation flow of a couple stress fluid over a rotating disk. The model developed for the governing problem in the form of partial differential equations has been converted to ordinary differential equations with the use of suitable similarity transformation. The analytical approximation has been made with the most promising analytical approach, homotopy analysis method (HAM). The convergence region of the obtained solution is determined and plotted. The effects of couple stress and nondimensional parameters have been observed on the flows of couple stress fluid. Also comparison has been made with the Newtonian fluid as the special case of considered problem.


2014 ◽  
Vol 31 (2) ◽  
pp. 201-215 ◽  
Author(s):  
N. A. Khan ◽  
S. Khan ◽  
F. Riaz

AbstractThe present paper studies the three-dimensional, off centered stagnation flow of a Jeffrey fluid over a rotating disk. The governing non-linear equations and their associated boundary conditions are transformed into coupled ordinary differential equations by utilizing an appropriate similarity transformation. Homotopy analysis method is utilized to evaluate the analytical solution in the form of infinite series. Also, the convergence region of the obtained solution is determined and plotted. The effects of pertaining parameters on radial, azimuthal and induced velocities of the fluid flow are presented graphically and discussed. Moreover comparisons have also been made with the previous results as a special case.


2019 ◽  
Vol XVI (2) ◽  
pp. 13-22
Author(s):  
Muhammad Ehtisham Siddiqui

Three-dimensional boundary-layer flow is well known for its abrupt and sharp transition from laminar to turbulent regime. The presented study is a first attempt to achieve the target of delaying the natural transition to turbulence. The behaviour of two different shaped and sized stationary disturbances (in the laboratory frame) on the rotating-disk boundary layer flow is investigated. These disturbances are placed at dimensionless radial location (Rf = 340) which lies within the convectively unstable zone over a rotating-disk. Mean velocity profiles were measured using constant-temperature hot-wire anemometry. By careful analysis of experimental data, the instability of these disturbance wakes and its estimated orientation within the boundary-layer were investigated.


2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Bai Yu ◽  
Muhammad Ramzan ◽  
Saima Riasat ◽  
Seifedine Kadry ◽  
Yu-Ming Chu ◽  
...  

AbstractThe nanofluids owing to their alluring attributes like enhanced thermal conductivity and better heat transfer characteristics have a vast variety of applications ranging from space technology to nuclear reactors etc. The present study highlights the Ostwald-de-Waele nanofluid flow past a rotating disk of variable thickness in a porous medium with a melting heat transfer phenomenon. The surface catalyzed reaction is added to the homogeneous-heterogeneous reaction that triggers the rate of the chemical reaction. The added feature of the variable thermal conductivity and the viscosity instead of their constant values also boosts the novelty of the undertaken problem. The modeled problem is erected in the form of a system of partial differential equations. Engaging similarity transformation, the set of ordinary differential equations are obtained. The coupled equations are numerically solved by using the bvp4c built-in MATLAB function. The drag coefficient and Nusselt number are plotted for arising parameters. The results revealed that increasing surface catalyzed parameter causes a decline in thermal profile more efficiently. Further, the power-law index is more influential than the variable thickness disk index. The numerical results show that variations in dimensionless thickness coefficient do not make any effect. However, increasing power-law index causing an upsurge in radial, axial, tangential, velocities, and thermal profile.


2019 ◽  
Vol 6 (3) ◽  
pp. 233-242 ◽  
Author(s):  
Sohail Nadeem ◽  
Muhammad Naveed Khan ◽  
Noor Muhammad ◽  
Shafiq Ahmad

Abstract The present investigation concentrates on three dimensional unsteady forced bio-convection flow of a viscous fluid. An incompressible flow of a micropolar nanofluid encloses micro-organisms past an exponentially stretching sheet with magnetic field is analyzed. By employing convenient transformation the partial differential equations are converted into the ordinary differential equations which are non-linear. By using shooting method to solved these equations numerically. The influence of the determining parameters on the velocity, temperature, micro-rotation, nanoparticle volume fraction, microorganism are incorporated. The skin friction, heat transfer rate, and the microorganism rate are analyzed. The results depicts that the value of the wall shear stress and Nusselt number are declined while an enhancement take place in the microorganism number. The slip parameters increases the velocity, thermal energy, and microorganism number consequentially. The present investigation are important in improving achievement of microbial fuel cells.


Author(s):  
W. T. Tiow ◽  
M. Zangeneh

The development and application of a three-dimensional inverse methodology is presented for the design of turbomachinery blades. The method is based on the mass-averaged swirl, rV~θ distribution and computes the necessary blade changes directly from the discrepancies between the target and initial distributions. The flow solution and blade modification converge simultaneously giving the final blade geometry and the corresponding steady state flow solution. The flow analysis is performed using a cell-vertex finite volume time-marching algorithm employing the multistage Runge-Kutta integrator in conjunction with accelerating techniques (local time stepping and grid sequencing). To account for viscous effects, dissipative forces are included in the Euler solver using the log-law and mixing length models. The design method can be used with any existing solver solving the same flow equations without any modifications to the blade surface wall boundary condition. Validation of the method has been carried out using a transonic annular turbine nozzle and NASA rotor 67. Finally, the method is demonstrated on the re-design of the blades.


2013 ◽  
Vol 729 ◽  
pp. 702-731 ◽  
Author(s):  
A. I. Ruban ◽  
M. A. Kravtsova

AbstractIn this paper we study the three-dimensional perturbations produced in a hypersonic boundary layer by a small wall roughness. The flow analysis is performed under the assumption that the Reynolds number, $R{e}_{0} = {\rho }_{\infty } {V}_{\infty } L/ {\mu }_{0} $, and Mach number, ${M}_{\infty } = {V}_{\infty } / {a}_{\infty } $, are large, but the hypersonic interaction parameter, $\chi = { M}_{\infty }^{2} R{ e}_{0}^{- 1/ 2} $, is small. Here ${V}_{\infty } $, ${\rho }_{\infty } $ and ${a}_{\infty } $ are the flow velocity, gas density and speed of sound in the free stream, ${\mu }_{0} $ is the dynamic viscosity coefficient at the ‘stagnation temperature’, and $L$ is the characteristic distance the boundary layer develops along the body surface before encountering a roughness. We choose the longitudinal and spanwise dimensions of the roughness to be $O({\chi }^{3/ 4} )$ quantities. In this case the flow field around the roughness may be described in the framework of the hypersonic viscous–inviscid interaction theory, also known as the triple-deck model. Our main interest in this paper is the nonlinear behaviour of the perturbations. We study these by means of numerical solution of the triple-deck equations, for which purpose a modification of the ‘skewed shear’ technique suggested by Smith (United Technologies Research Center Tech. Rep. 83-46, 1983) has been used. The technique requires global iterations to adjust the viscous and inviscid parts of the flow. Convergence of such iterations is known to be a major problem in viscous–inviscid calculations. In order to achieve improved stability of the method, both the momentum equation for the viscous part of the flow, and the equations describing the interaction with the flow outside the boundary layer, are treated implicitly in this study. The calculations confirm the fact that in this sort of flow the perturbations are capable of propagating upstream in the boundary layer, resulting in a perturbation field which surrounds the roughness on all sides. We found that the perturbations decay rather fast with the distance from the roughness everywhere except in the wake behind the roughness. We found that if the height of the roughness is small, then the perturbations also decay in the wake, though much more slowly than outside the wake. However, if the roughness height exceeds some critical value, then two symmetric counter-rotating vortices form in the wake. They appear to support themselves and grow as the distance from the roughness increases.


Sign in / Sign up

Export Citation Format

Share Document