scholarly journals Synthesis and characterization of Ag-chalcogenide nanoparticles for possible applications in photovoltaics

2018 ◽  
Vol 36 (3) ◽  
pp. 375-380 ◽  
Author(s):  
Subhash Chand ◽  
Pankaj Sharma
Keyword(s):  
Crystallite Size ◽  
Structural Parameters ◽  
Blue Shift ◽  
Optical Characterization ◽  
Molar Ratio ◽  
Synthesis And Characterization ◽  
Capping Agent ◽  
X Ray Diffraction ◽  
X Ray

AbstractBottom-up technique has been used to synthesize Ag-chalcogenide nanoparticles. This work reports on the synthesis of Ag2Se by varying the molar ratio of capping agent and pH of the solution. The synthesized nanoparticles have been characterized in terms of structural parameters using X-ray diffraction. By this technique, various parameters such as crystallite size, dislocation density and strain of the nanoparticles were calculated. The crystallite size decreased with the increase in pH of the solution. The optical characterization was carried out by UV-Vis-NIR spectrophotometer. With the decrease in the crystallite size, a blue shift in the absorption peak of the nanoparticles was observed. These properties are suitable for energy harvesting with the help of photovoltaics.

Synthesis and Characterization of YCrxAl1-xO3 Particles by a Reverse Micelle Processing

2017 ◽  
Vol 47 ◽  
pp. 54-59 ◽  
Author(s):  
Dae Han Lee ◽  
Ji Young Ock ◽  
Jeong Hoon Son ◽  
Dong Sik Bae
Keyword(s):  
Reverse Micelle ◽  
Heating Temperature ◽  
Molar Ratio ◽  
Synthesis And Characterization ◽  
X Ray Diffraction ◽  
Inorganic Pigment ◽  
X Ray ◽  
Heat Treated ◽  
Average Size

YCrxAl1-xO3 nanoparticles were synthesized by a reverse micelle processing for inorganic pigment. Y(NO3)2·6H2O, Cr (NO3)2·6H2O and Al (NO3)3·9H2O are used for precursors in order to synthesis YCrxAl1-xO3 nanoparticles. The aqueous solution consists of mixing the molar ratio of Y/Cr/Al at 1:x:1-x and heat treated at 900~1300°C for 2h. The average size and distribution of synthesized YCrxAl1-xO3 powders was in the range of 10-20nm and narrow, respectively. The average size of the synthesized YCrxAl1-xO3 powders increased with increasing water to surfactant molar ratio and heating temperature. The crystallinity of synthesized YCrxAl1-xO3 powder increased with increasing heating temperature. The synthesized YCrxAl1-xO3 powders were characterized by X-ray diffraction analysis (XRD), field emission scanning electron microscopy (FE-SEM) and color spectrophotometer. The properties of the synthesized powders were affected by such variables as molar ratio, heating temperature etc.

STRUCTURAL AND OPTICAL CHARACTERIZATION OF NANOCRYSTALLINE CuAlS2 CHALCOPYRITE SYNTHESIZED BY POLYOL METHOD IN AUTOCLAVE

2012 ◽  
Vol 26 (31) ◽  
pp. 1250179 ◽  
Author(s):  
Y. VAHIDSHAD ◽  
A. IRAJIZAD ◽  
R. GHASEMZADEH ◽  
S. M. MIRKAZEMI ◽  
A. MASOUD
Keyword(s):  
Electron Microscope ◽  
Polyethylene Glycol ◽  
Scanning Electron Microscope ◽  
Optical Characterization ◽  
Polyol Method ◽  
Capping Agent ◽  
X Ray Diffraction ◽  
X Ray ◽  
Scanning Electron

Chalcopyrite CuAlS 2 nanoparticles were synthesized with polyol method. The solvothermal with autoclave nanoparticles synthesized are investigated. The amount and temperature of reducer, the solvent of salts could be important parameters that were studied. The nanoparticles were synthesized with CuCl , AlCl 3 and thiourea ( SC ( NH 2)2) as precursors, diethylene glycol (( CH 2 CH 2 OH )2 O ) and polyethylene glycol 600 ( HO ( C 2 H 4 O )n H ) as solvent and capping agent respectively, and ammonia ( NH 4 OH ) as reducing agent. The parameters of synthesis were studied by X-Ray diffraction (XRD) for analysis of structure, scanning electron microscope (SEM) for morphology and by ultraviolet–visible (UV–VIS) spectrophotometer for analysis of light structure. The possible formation mechanism is also discussed.

Synthesis and Characterization of Silver Nanowires

2013 ◽  
Vol 678 ◽  
pp. 212-216
Author(s):  
Subbaiyan Sugapriya ◽  
Rangarajalu Sriram ◽  
Sriram Lakshmi
Keyword(s):  
Silver Nanowires ◽  
Synthesis And Characterization ◽  
Face Centered Cubic ◽  
Capping Agent ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Face Centered ◽  
Fcc Structure

ABSTRACT Silver nanowires have been synthesized by polyol process with ethylene glycol as solvent and PVP as capping agent. The silver nanowires have been characterized by X-ray diffraction (XRD), Scanning electron microscopy (SEM), Energy-dispersive X-ray spectroscopy (EDX), and Transmission electron microscope (TEM) techniques. The prepared silver nanowires were found to exhibit face-centered cubic (fcc) structure. The diameter of the prepared silver nanowires have been found to lie in the range of 60 - 80 nm and the length of the wires have been observed to be in the range of 10-20 µm. The I-V characteristics have been carried out to study the conducting behavior of the prepared silver nanowires.

Synthesis and Characterization of CoMn2O4 Nanopowders by a Reverse Micelle Processing

2016 ◽  
Vol 868 ◽  
pp. 105-110
Author(s):  
Dong Sik Bae
Keyword(s):  
Reverse Micelle ◽  
Molar Ratio ◽  
Synthesis And Characterization ◽  
X Ray Diffraction ◽  
X Ray ◽  
Xrd Diffraction ◽  
Transmission Electron ◽  
Diffraction Patterns ◽  
Average Size

CoMn2O4 nanoparticles were synthesized by reverse micelle processing from the mixed precursor (consisting of Co (NO3)2 ·6H2O and MnCl2·4H2O). The CoMn2O4 was prepared by mixing the aqueous solution at a molar ratio of Co : Mn = 1 : 2. The synthesized powders were calcined at 600°C for 2h. The average size and distribution of synthesized powders were in the range of 10-20nm and narrow, respectively. The average size of the synthesized powders increased with increasing water to surfactant molar ratio. The XRD diffraction patterns show that the phase of CoMn2O4 was spinel (JCPDS no.77-0471). The synthesized and calcined powders were characterized by thermogravimetry-differential scanning calorimeter (TG-DSC), X-ray diffraction analysis (XRD) and transmission electron microscopy (TEM). The magnetic property of the powder was measured by Vibrating Sample Magneto-meter (VSM) at 298K. The effect of synthesis parameter, such as the molar ratio of water to surfactant, is discussed.

Synthesis and Characterization of Flower-Sphere MoS2

2011 ◽  
Vol 695 ◽  
pp. 429-432 ◽  
Author(s):  
Jun Zhou ◽  
Xin Zhe Lan ◽  
Ping Ren ◽  
Qiu Li Zhang ◽  
Yong Hui Song ◽  
...  
Keyword(s):  
Particle Size ◽  
Hydrothermal Systems ◽  
Molar Ratio ◽  
Synthesis And Characterization ◽  
X Ray Diffraction ◽  
Sem Images ◽  
X Ray ◽  
Xrd Patterns ◽  
Scanning Electron

The flower-sphere molybdenum disulfide has been synthesized by reaction of Na2MoO4 and CS(NH2)2 with NH2OH·HCl or H2C2O4 as reductant. The microstructure and chemical composition of the product were characterized by means of X-ray diffraction and scanning electron microscope. XRD patterns showed that the molar ratio of Mo to S had a great effect on the purity of the product. When the molar ratio of Mo to S was 1:5, the product was nearly pure MoS2. SEM images showed that the particle size increased as the molar ratio of Mo to S reduced. The MoS2 microspheres had rough surfaces and were constructed with sheet-like structures in the two systems. But the product from the system of NH2OH·HCl as reductant has the bigger particle size, clearer petal-sheets, coarser surface and weaker agglomeration than that from the system H2C2O4 as reductant. The possible chemical reactions in hydrothermal systems were preliminarily discussed.

scholarly journals Synthesis and characterization of Co-Mo bimetallic carbides

2019 ◽  
Vol 51 (3) ◽  
pp. 319-326
Author(s):  
Aleksandra Saponjic ◽  
Djordje Saponjic ◽  
Ivana Perovic ◽  
Marina Vukovic ◽  
Vladimir Nikolic ◽  
...  
Keyword(s):  
Hydrogen Reduction ◽  
Metal Salts ◽  
Molar Ratio ◽  
Synthesis And Characterization ◽  
X Ray Diffraction ◽  
X Ray ◽  
Ordered Mesoporous ◽  
Silica Template ◽  
Scanning Electron

Co-Mo carbides were prepared by impregnation with aqueous solution of metal salts and sucrose into ordered mesoporous SBA-15 silica template using carbothermal hydrogen reduction. Bimetallic Co-Mo carbide obtained by using carbothermal hydrogen reduction of Co-Mo precursors is formed when the Co-Mo molar ratio is 1.0. The obtained samples were characterized by X-ray diffraction, scanning electron microscopy and energy dispersive X-ray analysis. Electrochemical characterization of obtained materials w?re performed by cyclic voltammetry in acid solution.

Synthesis and characterization of TiN / Ti / AISI 410 coatings

2018 ◽  
Vol 2 (1) ◽  
pp. 7
Author(s):  
S Chirino ◽  
Jaime Diaz ◽  
N Monteblanco ◽  
E Valderrama
Keyword(s):  
Synthesis And Characterization ◽  
Photoemission Spectroscopy ◽  
X Ray Diffraction ◽  
X Ray ◽  
Columnar Grains ◽  
Tin Thin Films ◽  
Steel Aisi ◽  
Interacting Surfaces ◽  
Stainless Steel Aisi

The synthesis and characterization of Ti and TiN thin films of different thicknesses was carried out on a martensitic stainless steel AISI 410 substrate used for tool manufacturing. The mechanical parameters between the interacting surfaces such as thickness, adhesion and hardness were measured. By means of the scanning electron microscope (SEM) the superficial morphology of the Ti/TiN interface was observed, finding that the growth was of columnar grains and by means of EDAX the existence of titanium was verified.  Using X-ray diffraction (XRD) it was possible to observe the presence of residual stresses (~ -3.1 GPa) due to the different crystalline phases in the coating. Under X-ray photoemission spectroscopy (XPS) it was possible to observe the molecular chemical composition of the coating surface, being Ti-N, Ti-N-O and Ti-O the predominant ones.

scholarly journals Synthesis and Characterization of Clay Polymer Nanocomposites of P(4VP-co-AAm) and Their Application for the Removal of Atrazine

Polymers ◽  
2019 ◽  
Vol 11 (4) ◽  
pp. 721 ◽  
Author(s):  
Jorge A. Ramírez-Gómez ◽  
Javier Illescas ◽  
María del Carmen Díaz-Nava ◽  
Claudia Muro-Urista ◽  
Sonia Martínez-Gallegos ◽  
...  
Keyword(s):  
Polymer Nanocomposites ◽  
Nanocomposite Materials ◽  
Synthesis And Characterization ◽  
Cross Linking ◽  
X Ray Diffraction ◽  
Numerous Species ◽  
X Ray ◽  
Different Types ◽  
Synthesized Materials

Atrazine (ATZ) is an herbicide which is applied to the soil, and its mechanism of action involves the inhibition of photosynthesis. One of its main functions is to control the appearance of weeds in crops, primarily in corn, sorghum, sugar cane, and wheat; however, it is very toxic for numerous species, including humans. Therefore, this work deals with the adsorption of ATZ from aqueous solutions using nanocomposite materials, synthesized with two different types of organo-modified clays. Those were obtained by the free radical polymerization of 4-vinylpyridine (4VP) and acrylamide (AAm) in different stoichiometric ratios, using tetrabutylphosphonium persulfate (TBPPS) as a radical initiator and N,N′-methylenebisacrylamide (BIS) as cross-linking agent. The structural, morphological, and textural characteristics of clays, copolymers, and nanocomposites were determined through different analytical and instrumental techniques, i.e., X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), and thermogravimetric analysis (TGA). Adsorption kinetics experiments of ATZ were determined with the modified and synthesized materials, and the effect of the ratio between 4VP and AAm moieties on the removal capacities of the obtained nanocomposites was evaluated. Finally, from these sets of experiments, it was demonstrated that the synthesized nanocomposites with higher molar fractions of 4VP obtained the highest removal percentages of ATZ.

scholarly journals High-pressure synthesis and characterization of the non-centrosymmetric scandium borate ScB6O9(OH)3

2020 ◽  
Vol 75 (6-7) ◽  
pp. 597-603
Author(s):  
Birgit Fuchs ◽  
Hubert Huppertz
Keyword(s):  
High Pressure ◽  
High Temperature ◽  
Synthesis And Characterization ◽  
X Ray Diffraction ◽  
X Ray ◽  
High Pressure High Temperature ◽  
Structure Solution ◽  
Temperature Experiment ◽  
Pressure Synthesis

AbstractThe non-centrosymmetric scandium borate ScB6O9(OH)3 was obtained through a high-pressure/high-temperature experiment at 6 GPa and 1473 K. Single-crystal X-ray diffraction revealed that the structure is isotypic to InB6O9(OH)3 containing borate triple layers separated by scandium layers. The compound crystallizes in the space group Fdd2 with the lattice parameters a = 38.935(4), b = 4.4136(4), and c = 7.6342(6) Å. Powder X-ray diffraction and vibrational spectroscopy were used to further characterize the compound and verify the proposed structure solution.

One Step Synthesis and Characterization of Zirconia-Graphene Composites

2012 ◽  
Vol 600 ◽  
pp. 174-177 ◽  
Author(s):  
Jian Fei Xia ◽  
Zong Hua Wang ◽  
Yan Zhi Xia ◽  
Fei Fei Zhang ◽  
Fu Qiang Zhu ◽  
...  
Keyword(s):  
Synthesis And Characterization ◽  
Two Dimensional ◽  
X Ray Diffraction ◽  
X Ray ◽  
Graphene Composite ◽  
Transmission Electron ◽  
One Step ◽  
Ft Ir ◽  
Xrd Techniques

Zirconia-graphene composite (ZrO2-G) has been successfully synthesized via decomposition of ZrOCl2•6H2O in a water-isopropanol system with dispersed graphene oxide (GO) utilizing Na2S as a precursor could enable the occurrence of the deposition of Zr4+ and the deoxygenation of GO at the same time. Transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FT-IR) and X-ray diffraction (XRD) techniques were used to characterize the samples. It was found that graphene were fully coated with ZrO2, and the ZrO2 existing in tetragonal phase, which resulted in the formation of two-dimensional composite.

Sign in / Sign up

Export Citation Format

Share Document