Significant Alloy Elements in Welded Steel Structures of Car Body

2012 ◽  
Vol 57 (1) ◽  
pp. 45-52 ◽  
Author(s):  
T. Węgrzyn ◽  
R. Wieszała
Keyword(s):  
Steel Structure ◽  
Steel Structures ◽  
Filler Materials ◽  
Main Role ◽  
Welded Steel ◽  
Car Body ◽  
Welding Method ◽  
Welding Steel ◽  
Selection Of

Significant Alloy Elements in Welded Steel Structures of Car Body Structure, safety and exploitation conditions of welding steel in car body depend on many factors. The main role of that conditions is connected with car body material, welding technology, state of stress and temperature. Because of that, a good selection of steel and welding method is very important for proper steel structure. Low alloy steel is used for car body structure, very often with small amount of carbon and the amount of alloy elements such as Ni, Mn, Mo, Cr and V in car body and welded joints. Depending on the kind of steel which is used, a proper welding method and adequate filler materials should be applied. The present paper describes the influence of Mn, Ni, Mo, Cr, V in WMD (Weld Metal Deposit) on the behaviour of steel structure especially for low temperature service.

Oxide Inclusions in Steel Welds of Car Body

2010 ◽  
Vol 636-637 ◽  
pp. 585-591 ◽  
Author(s):  
T. Wegrzyn ◽  
J. Miroslawski ◽  
Abílio P. Silva ◽  
D.G. Pinto ◽  
M. Miros
Keyword(s):  
Weld Metal ◽  
Alloy Steel ◽  
Oxide Inclusion ◽  
Steel Structure ◽  
Filler Materials ◽  
Low Carbon ◽  
Low Alloy Steel ◽  
Car Body ◽  
Welding Method ◽  
Steel Weld Metal

The goal of this research is to choose the proper method of car body welding. Properties of weld metal deposits depend on many conditions. First of all, this paper attempts to study the role of oxide inclusion sites on the transformation of austenite to acicular ferrite in steel weld metal deposits and their toughness. Safety and exploitation conditions of welded steel structure depend on many factors. The most significant of those factors are connected with materials, welding technology, state of stress and temperature. Because of that a good selection of steel and welding method is crucial to obtain proper steel structure. Car body elements of higher durability are made of low carbon and low alloy steel, very often with small amount of carbon and the amount of alloy elements such as Ni, Mn, Mo, Cr and V in low alloy steel and their welds. In the terms of the kind of steel it is used a proper welding method and adequate filler materials. In the present paper the influence of Mn, Ni, Mo, in WMD on the behaviour of steel structure for low temperature service was tested.

CHD proteins: a diverse family with strong tiesThis paper is one of a selection of papers published in this Special Issue, entitled 28th International West Coast Chromatin and Chromosome Conference, and has undergone the Journal's usual peer review process.

2007 ◽  
Vol 85 (4) ◽  
pp. 463-476 ◽  
Author(s):  
J. Adam Hall ◽  
Philippe T. Georgel
Keyword(s):  
Peer Review Process ◽  
Regulation Of Gene Expression ◽  
Multiple Roles ◽  
Main Role ◽  
Helicase Domain ◽  
Structural Domains ◽  
Potential Activity ◽  
Or Gene ◽  
Selection Of

Chromodomain/helicase/DNA-binding domain (CHD) proteins have been identified in a variety of organisms. Despite common features, such as their chromodomain and helicase domain, they have been described as having multiple roles and interacting partners. However, a common theme for the main role of CHD proteins appears to be linked to their ATP-dependent chromatin-remodeling activity. Their actual activity as either repressor or activator, and their cell or gene specificity, is connected to their interacting partner(s). In this minireview, we attempt to match the members of the CHD family with the presence of structural domains, cofactors, and cellular roles in the regulation of gene expression, recombination, genome organization, and chromatin structure, as well as their potential activity in RNA processing.

scholarly journals Concept for completeness checking of joined structures exemplified on rail vehicle car body shells

2017 ◽  
Vol 6 (1) ◽  
pp. 53-63
Author(s):  
Uwe Jurdeczka
Keyword(s):  
Steel Structure ◽  
Steel Structures ◽  
Point Clouds ◽  
Constructional Steel ◽  
Car Body ◽  
Target State ◽  
Beam Geometry ◽  
The Difference ◽  
Actual Configuration ◽  
D Model

Abstract. Completeness checking of constructional steel structures with several hundred weld-on parts (mountings, such as car body shells/chassis for rail vehicles, for example) still represents a great challenge. It has been performed manually so far. By the use of 3-D scanners, it is possible to obtain sufficiently comprehensive information about the actual configuration (as-is state) of the constructional steel structure to be checked. For this purpose, the laser beam geometry must be contemplated. By using an adapted algorithm for post-processing of the resulting point clouds, difference figures are superimposed over the respective 3-D model as the target state. Therefore, an algorithm was adapted and applied here. The difference figures are useful for signalling the possible deviations and the missing parts, at least, however, suspect points. Thus, the disadvantages of the exclusively manual completeness checking practiced so far, i.e. tiredness and slowness of the inspector, can largely be avoided. The 3-D model-based inspection procedure allows one to handle the variation in the target state with just a few volumes of equal configuration (e.g. less than 10 trains with equal configuration). There is a general problem that the tolerance for the structure is in the same range as the size of the mountings. It is possible to solve this problem by dividing the test item as well as the point cloud into areas. Superposing the 3-D model by point clouds and calculating the difference figures will be performed area by area.

Adjunct Cultures in Cheese Technology

2018 ◽  
pp. 234-256 ◽  
Author(s):  
Ayşe Gürsoy ◽  
Nazlı Türkmen
Keyword(s):  
Lactic Acid ◽  
Lactic Acid Bacteria ◽  
The Other ◽  
Main Role ◽  
Positive Effects ◽  
Cheese Ripening ◽  
Adjunct Cultures ◽  
Ripening Time ◽  
Selection Of

Cheese ripening involves highly complex biochemical events. Coagulant enzymes as well as the utilized starters play an important role in these events. Two types of starters are used: primary and secondary. The main role of the primary culture, which consists of lactic acid bacteria, is to carry out lactic production during fermentation. They contribute to proteolysis and limited flavor formation with the enzymes they possess. Secondary or adjunct cultures are used to develop the texture and to accelerate the ripening. During the selection of this type of culture, enzyme profiles (i.e., proteolytic and lipolytic activities and their autolyse levels) in cheese are the primary factors to be taken into consideration. Apart from these, the other factors are their positive effects on health, availability, and economy. Adjunct cultures include yeast, molds, and bacteria. Some of the heterofermentative lactobacilli species, in particular weakened strains, are used as adjunct cultures in order to accelerate the ripening and shorten the ripening time in fat-reduced and low-fat cheeses. This chapter explores adjunct cultures in cheese technology.

scholarly journals The Basal Ganglia and Motor Control

2003 ◽  
Vol 10 (1-2) ◽  
pp. 107-120 ◽  
Author(s):  
Henk J. Groenewegen
Keyword(s):  
Motor Control ◽  
Basal Ganglia ◽  
Functional Organization ◽  
Functional Anatomy ◽  
Main Role ◽  
Brain Functions ◽  
Wide Range ◽  
Selection Mechanisms ◽  
Selection Of

This paper briefly reviews the functional anatomy of the basal ganglia and their relationships with the thalamocortical system. The basal ganglia, including the striatum, pallidum, subthalamic nucleus, and substantia nigra, are involved in a number of parallel, functionally segregated cortical-subcortical circuits. These circuits support a wide range of sensorimotor, cognitive and emotional-motivational brain functions. A main role of the basal ganglia is the learning and selection of the most appropriate motor or behavioral programs. The internal functional organization of the basal ganglia is very well suited for such selection mechanisms, both in development and in adulthood. The question of whether clumsiness may be, at least in part, attributed to dysfunction of the basal ganglia is discussed in the context of the differential, complementary, or interactive roles of the basal ganglia and the cerebellum in the development of motor control.

scholarly journals Metabolic selection of a homologous recombination mediated loss of glycosomal fumarate reductase in Trypanosoma brucei

2020 ◽  
Author(s):  
Marion Wargnies ◽  
Nicolas Plazolles ◽  
Robin Schenk ◽  
Oriana Villafraz ◽  
Jean-William Dupuy ◽  
...  
Keyword(s):  
Gene Knockout ◽  
Reductase Activity ◽  
Tsetse Fly ◽  
Fumarate Reductase ◽  
Main Role ◽  
Deletion Event ◽  
Intracellular Ros ◽  
Negative Effect ◽  
Selection Of

AbstractThe genome of trypanosomatids is rearranged at the level of repeated sequences, where serve as platforms for amplification or deletion of genomic segments. We report here that the PEPCK gene knockout (Δpepck) leads to the selection of such a deletion event between the FRDg and FRDm2 genes to produce a chimeric FRDg-m2 gene in the Δpepck* cell line. FRDg is expressed in peroxisome-like organelles, named glycosomes, expression of FRDm2 has not been detected to date, and FRDg-m2 is a non-functional cytosolic FRD. Re-expression of FRDg significantly impaired growth of the Δpepck* cells, while inhibition of FRDg-m2 expression had no effect, which indicated that this recombination event has been selected in the Δpepck* cells to eliminate FRDg. FRD activity was not involved in the FRDg-mediated negative effect, while its auto-flavinylation motif is required to impair growth. Considering that (i) FRDs are known to generate reactive oxygen species (ROS) by transferring electrons from their flavin moiety(ies) to oxygen, (ii) intracellular ROS production is essential for the differentiation of procyclic to epimastigote forms of the parasite and (iii) the fumarate reductase activity is not essential for the parasite, we propose that the main role of FRD is to produce part of the ROS necessary to complete the parasitic cycle in the tsetse fly. In this context, the negative effect of FRDg expression in the PEPCK null background is interpreted as an increased production of ROS from oxygen since fumarate, the natural electron acceptor of FRDg, is no longer produced in glycosomes.

Role of spectrin in membrane fusion and in shape change of human erythrocyte ghost

1978 ◽  
Vol 36 (2) ◽  
pp. 328-329
Author(s):  
Hideo Hayashi ◽  
Yoshikazu Hirai ◽  
John T. Penniston
Keyword(s):  
Conformational Changes ◽  
Human Erythrocyte ◽  
Shape Change ◽  
Membrane Surface ◽  
Slight Modification ◽  
Active Role ◽  
Main Role ◽  
Bank Blood ◽  
Human Erythrocyte Ghost

Spectrin is a membrane associated protein most of which properties have been tentatively elucidated. A main role of the protein has been assumed to give a supporting structure to inside of the membrane. As reported previously, however, the isolated spectrin molecule underwent self assemble to form such as fibrous, meshwork, dispersed or aggregated arrangements depending upon the buffer suspended and was suggested to play an active role in the membrane conformational changes. In this study, the role of spectrin and actin was examined in terms of the molecular arrangements on the erythrocyte membrane surface with correlation to the functional states of the ghosts.Human erythrocyte ghosts were prepared from either freshly drawn or stocked bank blood by the method of Dodge et al with a slight modification as described before. Anti-spectrin antibody was raised against rabbit by injection of purified spectrin and partially purified.

Mesophyll conductance: the leaf corridors for photosynthesis

2020 ◽  
Vol 48 (2) ◽  
pp. 429-439 ◽  
Author(s):  
Jorge Gago ◽  
Danilo M. Daloso ◽  
Marc Carriquí ◽  
Miquel Nadal ◽  
Melanie Morales ◽  
...  
Keyword(s):  
Molecular Mechanisms ◽  
Current Knowledge ◽  
Main Role ◽  
Mesophyll Conductance ◽  
Future Studies ◽  
Cell Structures ◽  
Leaf Tissues ◽  
Change Framework ◽  
Chloroplast Stroma

Besides stomata, the photosynthetic CO2 pathway also involves the transport of CO2 from the sub-stomatal air spaces inside to the carboxylation sites in the chloroplast stroma, where Rubisco is located. This pathway is far to be a simple and direct way, formed by series of consecutive barriers that the CO2 should cross to be finally assimilated in photosynthesis, known as the mesophyll conductance (gm). Therefore, the gm reflects the pathway through different air, water and biophysical barriers within the leaf tissues and cell structures. Currently, it is known that gm can impose the same level of limitation (or even higher depending of the conditions) to photosynthesis than the wider known stomata or biochemistry. In this mini-review, we are focused on each of the gm determinants to summarize the current knowledge on the mechanisms driving gm from anatomical to metabolic and biochemical perspectives. Special attention deserve the latest studies demonstrating the importance of the molecular mechanisms driving anatomical traits as cell wall and the chloroplast surface exposed to the mesophyll airspaces (Sc/S) that significantly constrain gm. However, even considering these recent discoveries, still is poorly understood the mechanisms about signaling pathways linking the environment a/biotic stressors with gm responses. Thus, considering the main role of gm as a major driver of the CO2 availability at the carboxylation sites, future studies into these aspects will help us to understand photosynthesis responses in a global change framework.

Sign in / Sign up

Export Citation Format

Share Document