scholarly journals X-Band Microstrip Bandpass Filter Design using Square Loop Resonator and Defected Ground Structure

2020 ◽  
Vol 7 (1) ◽  
pp. 1
Author(s):  
E. Edwar ◽  
M.R. Yusron ◽  
Dharu Arseno
Keyword(s):  
Bandpass Filter ◽  
Filter Design ◽  
Radar System ◽  
Center Frequency ◽  
Q Factor ◽  
Defected Ground Structure ◽  
Ground Structure ◽  
Telecommunication System ◽  
X Band

Filter is an important part in telecommunication system including in radar system. To get the better performance in selecting the signal, a ftlter must have a good Q-Factor. In this paper, an investigation of a ftlter design for synthetic radar has been successfully done. This ftlter has been designed to work at x-band using square loop resonator (SLR). A Defected Ground Structure (DGS) has been implemented to this work to increase the Q-factor of the ftlter. The result of measurement getting that the center frequency at 9.51 GHz with the bandwidth 610 MHz and PCB size of this ftlter is 22 mm x 16 mm.

scholarly journals Design of microstrip hairpin bandpass filter for 2.9 GHz – 3.1 GHz s-band radar with defected ground structure

2019 ◽  
Vol 14 (4) ◽  
pp. 448-455 ◽  
Author(s):  
Nanang Ismail ◽  
Teddy Surya Gunawan ◽  
Santi Kartika S ◽  
Teguh Praludi ◽  
Eki A.Z. Hamidi
Keyword(s):  
Insertion Loss ◽  
Return Loss ◽  
Bandpass Filter ◽  
Filter Design ◽  
Center Frequency ◽  
Small Displacement ◽  
Substrate Thickness ◽  
Frequency Range ◽  
Defected Ground Structure ◽  
Ground Structure

Radar has been widely used in many fields, such as telecommunication, military applications, and navigation. The filter is one of the most important parts of a radar system, in which it selects the necessary frequency and blocks others. This paper presents a novel yet simple filter design for S-band radar in the frequency range of 2.9 to 3.1 GHz. The center frequency of the filter was designed at 3 GHz with a bandwidth of 200 MHz, insertion loss larger than -3 dB and return loss less than -20 dB. Fifth order microstrip hairpin bandpass filter (BPF) was designed and implemented on Rogers 4350B substrate which has a dielectric relative constant value of (εr)= 3.48 and substrate thickness of (h) =1.524 mm. One element of the square groove was added as Defected Ground Structure (DGS) which can decrease the filter size, reduce harmonization, and increase return loss. Two scenarios were used in the measurement, i.e. with and without enclosed aluminum casing. Results showed that BPF without casing obtained the insertion loss of -1.748 dB at 2.785 GHz and return loss of -21.257 dB in the frequency range between 2.785 to 2.932 GHz. On the other hand, BPF with casing shows a better performance, in which it obtained the insertion loss of -1.643 dB at 2.921 GHz and return loss of -19.529 in the frequency range between 2.820 to 3.021 GHz. Although there is small displacement of frequency and response value between the simulation and implementation, our BPF has the ability to work on S-band radar with a frequency range of 2 to 4 GHz. 

scholarly journals A Bandpass Filter Based on Half Mode Substrate Integrated Waveguide-to-Defected Ground Structure Cells

2015 ◽  
Vol 2015 ◽  
pp. 1-7 ◽  
Author(s):  
Yong Mao Huang ◽  
Zhenhai Shao ◽  
Zhaosheng He ◽  
Chang Jiang You ◽  
Di Jiang
Keyword(s):  
Insertion Loss ◽  
Bandpass Filter ◽  
Second Harmonic ◽  
Substrate Integrated Waveguide ◽  
Harmonic Suppression ◽  
Defected Ground Structure ◽  
Ground Structure ◽  
X Band ◽  
Compact Size ◽  
Low Insertion Loss

A half mode substrate integrated waveguide-to-defected ground structure (HMSIW-DGS) cell and its embedded form are proposed to miniaturize a bandpass filter. Both cells can purchase wideband frequency response and low insertion loss, as well as simple and easy fabrication. By cascading two of them according to design requirement, an X-band bandpass filter is designed and measured to meet compact size, low insertion loss, good return loss, second harmonic suppression, and linear phase.

Substrate Integrated Waveguide Based Bandpass Filter with Defected Ground Structure for FMCW Radar Application

2020 ◽  
Vol 10 (3) ◽  
pp. 421-429
Author(s):  
Keyur Mahant ◽  
Hiren Mewada
Keyword(s):  
Bandpass Filter ◽  
Frequency Tuning ◽  
Dielectric Material ◽  
Three Dimensional ◽  
Fem Analysis ◽  
Dissipation Factor ◽  
Center Frequency ◽  
Substrate Integrated Waveguide ◽  
Defected Ground Structure ◽  
Ground Structure

Aims : Substrate Integrated Waveguide (SIW) based bandpass filter is presented in this paper. Objectives: In the proposed design, bandpass response is achieved by combining SIW structure with elliptic shaped Defected Ground Structure (DGS) cells. Methods : Simulation of the proposed structure is carried out using commercial software Ansoft High Frequency Structure Simulator (HFSS), which is a three-dimensional frequency domain electromagnetic solver based on the Finite Element Method (FEM). Analysis of three different types of DGS cells including rectangular, circular and elliptical has been carried out. Moreover, Frequency tuning is also carried out by changing the dimension of DGS. Result : Proposed filter is fabricated on the dielectric material RT duroid 5880 with the dielectric constant ɛεr=2.2, dissipation factor tanδ=4 x 10-4 and height h= 0.508 mm. The measured return loss of 25.71 dB and insertion loss of 1.24 dB with 3 dB Fractional Bandwidth (FBW) of 4.8% at the center frequency of 7 GHz. Conclusion : Good agreements are observed between the experimental results and the simulations.

scholarly journals CPW based Band Pass Filter Using DGS for ISM Band Applications

2018 ◽  
Vol 7 (3.34) ◽  
pp. 421
Author(s):  
Mrs. S. Jalaja ◽  
Dr V. Prithivirajan ◽  
K Gajalakshimi ◽  
S Chitra ◽  
R Nithya
Keyword(s):  
Bandpass Filter ◽  
Coplanar Waveguide ◽  
Center Frequency ◽  
Band Pass Filter ◽  
Defected Ground Structure ◽  
Ground Structure ◽  
Pass Filter ◽  
Ism Band ◽  
Band Pass ◽  
Filtering Effect

The design and simulation of coplanar waveguide (CPW) bandpass filter (BPF) has been described in this paper. It mainly focuses on Defected Ground Structure (DGS), where U-shaped DGS with open stub in transmission line has been introduced. By etching the DGS pattern in ground and transmission will change the distribution of inductance and capacitance to produce filtering effect. This paper also discusses about the influence of geometrical parameter l for the improvement in the frequency response of bandpass filter. As increasing the dimension of the geometric parameter l shift the center frequency to the higher frequencies. This filter offers a bandwidth of 1.65 GHz with passband ranging from 2.1 GHz to 3.75 GHz with a stopband rejection is about -28 dB.  

A Design of Microstrip Line Filter Using the Semicircle Defected Ground Structure

2015 ◽  
Vol 799-800 ◽  
pp. 1217-1221
Author(s):  
Ping Cheng Chen ◽  
Chung Long Pan ◽  
Y.C. Qiu ◽  
G.P. Jhuan
Keyword(s):  
Frequency Response ◽  
Microstrip Line ◽  
Center Frequency ◽  
Q Factor ◽  
Defected Ground Structure ◽  
Ground Structure ◽  
Harmonic Frequency ◽  
High Q ◽  
Ansoft Hfss

A design and simulation for microstrip line filter with semicircle defected ground structure has been researched. In this paper, simulated soft (Ansoft HFSS V.6.0) used to be simulated the frequency response under different parameters such as dimensions, amounts of SDGS.The results show good performance of SDGS in high cut-off frequency, erase of harmonic frequency, smaller dimension. Final, a filter with4.4GHz center frequency,high Q-factor had been design and fabricated.

Sign in / Sign up

Export Citation Format

Share Document