TRW 40 klbf LOX/RP-1 low cost pintle engine test results

Author(s):  
Tom Mueller ◽  
Gordon Dressler
Keyword(s):  
Low Cost ◽  
Author(s):  
Wendy J. Matthews ◽  
Terry Bartel ◽  
Dwaine L. Klarstrom ◽  
Larry R. Walker

HAYNES® alloy HR-120® has been identified as a potential alloy for the manufacture of primary surface recuperators. Primary surface recuperator components have been manufactured from HR-120, and actual microturbine testing is on going. Initial engine test results indicate the formation of a protective oxide scale that is resistant to both steady-state and cyclic operation with no evidence of accelerated attack, and which is likely to meet or exceed the desired 80,000 hour component life.


Author(s):  
G A Parker ◽  
Y B Sun

The work presented in this paper deals mainly with a mechatronic approach to compact disc valve design and concentrates on improvements to the disc valve electromagnetic characteristics, the diaphragm design and the dynamic performance. A novel diaphragm-disc force motor has been successfully developed incorporating a pair of permanent ring magnets. It has the advantages of low electric power consumption at the null position, dual-lane electrical structure for fail-safe operation, high control accuracy and should be competitive with existing torque motors due to its low cost and simple construction. The research involved designing and testing a prototype disc pilot valve with a dual-lane operating mode. The test results showed that the valve has satisfactory static and dynamic characteristics for industrial applications.


2021 ◽  
Author(s):  
Hsiu An Lee ◽  
Hsin-Hua Kung ◽  
Wei-Chen Wu ◽  
Jai Ganesh Udayasankaran ◽  
Yu-Chih Wei ◽  
...  

BACKGROUND The coronavirus disease 2019 (COVID-19) is an ongoing global pandemic caused by severe acute respiratory syndrome coronavirus type 2 (SARS-CoV-2). The prevention and treatment methods for COVID-19 are not yet clear. At present, there are at least 287 preventive vaccines against COVID-19 in the world, of which 5 vaccines are available for emergency use as of June 2021, but none has completed clinical trial. Nevertheless, with the development of vaccines, disease conditions in various countries are gradually controlled. OBJECTIVE The vaccination rate has increased in time, and activities in various countries have gradually recovered. Therefore, the focus of the next stage is confirming and proving that everyone is vaccinated to ensure that those without vaccines will not become a breach in the next wave of diseases. The vaccination or RT-PCR test results are all certified and verified by paper documents issued by hospitals or testing institutions. Meanwhile, falsified documents are a major risk factor in confirming the vaccination status and laboratory test results. Although the Vaccine Passport (VP) may become an important key to future global activities based on the current strategy, the problems of document verification and data use among countries have not yet been resolved. METHODS The blockchain architecture proposed in this research can be applied together by public and private entities and be rapidly expanded. Furthermore, the open ledger of blockchain achieves transparency and data accuracy. On the other hand, smart contracts (SCs) achieve authorization and authentication, while the encryption and decryption mechanisms achieve data protection. In order to make it globally available, the international data standard “Fast Healthcare Interoperability Resource (FHIR)” is adopted into this research. In general, this blockchain architecture can achieve global vaccine passport verification accurately and at a low cost. RESULTS The open nature of the blockchain contributes to establishing transparency and data accuracy. Total three entities are included in this blockchain architecture. All of the authorization are public in the open ledger. The smart certificate enables authorization and authentication, while the encryption and decryption mechanism ensure data protection. This proof of concept demonstrates the design of blockchain architecture which, when adopted, can achieve global vaccine passport verification accurately and at a cost country can afford. An actual vaccine passport case was established and demonstrated in this study. Open blockchain, individually authorized authentication mechanisms, and international standard vaccine passports were adopted. CONCLUSIONS Blockchain architecture is used to build the authentication process of an executable international vaccine passport, with advantages of low cost, high interoperability, effectiveness, security and verifiability.


Author(s):  
Wendy J. Matthews

HAYNES ® alloy HR-120 ® is being evaluated as a replacement for type 347 stainless steel for use in Microturbine Primary Surface Recuperators. The material has been characterized after being subjected to both steady-state and cyclic engine exposure in a Capstone C60 MicroTurbine™ operating at 100°F above the normal operating temperature. Oxide scale growth and elemental depletion has been analyzed and documented after 1,800 and 2,500 hours of exposure. A preliminary estimate of the remaining usable oxidation life has been made using a simplified parabolic model. Engine test results indicate that HR-120 has improved oxidation resistance and elemental stability.


2002 ◽  
Vol 124 (3) ◽  
pp. 205-211 ◽  
Author(s):  
John H. Lau ◽  
S. W. Ricky Lee ◽  
Stephen H. Pan ◽  
Chris Chang

An elasto-plastic-creep analysis of a low-cost micro via-in-pad (VIP) substrate for supporting a solder bumped flip chip in a chip scale package (CSP) format which is soldered onto a printed circuit board (PCB) is presented in this study. Emphasis is placed on the design, materials, and reliability of the micro VIP substrate and of the micro VIP CSP solder joints on PCB. The solder is assumed to obey Norton’s creep law. Cross-sections of samples are examined for a better understanding of the solder bump, CSP substrate redistribution, micro VIP, and solder joint. Also, the thermal cycling test results of the micro VIP CSP PCB assembly is presented.


2014 ◽  
Vol 12 ◽  
pp. 61-66 ◽  
Author(s):  
Pavol Kajánek

Inertial navigation system (INS) is a self-contained navigation technique. Its main purpose is to determinate the position and the trajectory of the object´s movement in space. This technique is well represented not only as a supplementary method (GPS/INS integrated system) but as an autonomous system for navigation of vehicles and pedestrians, also. The aim of this paper is to design a test for low-cost inertial measurement units. The test results give us information about accuracy, which determine the possible use in indoor navigation or other applications. There are described some methods for processing the data obtained by inertial measurement units, which remove noise and improve accuracy of position and orientation.


Buildings ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 355
Author(s):  
Qudeer Hussain ◽  
Anat Ruangrassamee ◽  
Somnuk Tangtermsirikul ◽  
Panuwat Joyklad ◽  
Anil C. Wijeyewickrema

This research investigates the behavior of square concrete columns externally wrapped by low-cost and easily available fiber rope reinforced polymer (FRRP) composites. This study mainly aims to explore the axial stress-strain relationships of FRRP-confined square columns. Another objective is to assess suitable predictive models for the ultimate strength and strain of FRRP-confined square columns. A total of 60 square concrete columns were cast, strengthened, and tested under compression. The parameters were the corner radii of square columns (0, 13, and 26 mm) and different materials of FRRP composites (polyester, hemp, and cotton FRRP composites). The strength and deformability of FRRP-confined specimens were observed to be higher than the unconfined specimens. It was observed that strength gains of FRRP-confined concrete columns and corner radii were directly proportional. The accuracy of ultimate strength and strain models developed for synthetic FRRP-confined square columns was assessed using the test results of this study, showing the need for the development of improved predictive models for FRRP-confined square columns. Newly developed unified models were found to be accurate in predicting the ultimate strength and strain of FRRP-confined columns.


Molecules ◽  
2020 ◽  
Vol 25 (5) ◽  
pp. 1220
Author(s):  
Leticia Presa ◽  
Jorge L. Costafreda ◽  
Domingo A. Martín ◽  
Isabel Díaz

This work deals with anomalous concentrations of natural mordenite in the southeast of Spain. The X-ray diffraction (XRD) and scanning electron microscopy (SEM) studies evidenced that the samples contain mainly monomineral zeolitic phase of mordenite (70% to 74%), usually accompanied by smectite (montmorillonite), the principal component of bentonite. A study of the applicability of these zeolites is presented to establish the potential use as pozzolanic cements. For comparative purposes, synthetic commercial mordenite is also characterized and tested. The initial mixtures were prepared using cement and mordenite at a 75:25 ratio. Chemical analysis and a pozzolanicity test showed the high pozzolanic character. These mixtures were further added to sand and water, yielding the cement specimens to be used as concrete. Mechanical test results showed that the mechanical compression at 7 and 28 days fall into the range of 19.23 to 43.05 MegaPascals (MPa) for the cement specimens built with natural mordenites. The obtained results fall in the same range of cement specimens prepared with natural clinoptilolite, using mixtures within the European requirement for commercial concretes. Thus, these results and the low cost of natural mordenite of San José de los Escullos deposit supports the potential use of natural mordenite as pozzolanic cement.


1998 ◽  
Vol 31 (4) ◽  
pp. 105-109
Author(s):  
Z. Ren ◽  
T. Campbell ◽  
J. B. Yang

Author(s):  
Hans U. Burri

A brief outline is given of the method of characteristics for the analysis of one-dimensional nonsteady flow. Two typical types of experiments are discussed which indicate the degree of accuracy possible if this method is applied to machinery like the Comprex supercharger. As an example, a typical analysis is presented for one particular engine-performance point. It is possible to duplicate engine test results with acceptable accuracy.


Sign in / Sign up

Export Citation Format

Share Document