Experimental study on the far field acoustic characteristics of a NACA0012 airfoil with rime ice on the leading edge

2019 ◽  
Author(s):  
Chunhua Xiao ◽  
Phillip Joseph ◽  
Kunlong Yu
Keyword(s):  
Experimental Study ◽  
Leading Edge ◽  
Far Field ◽  
Acoustic Characteristics ◽  
Naca0012 Airfoil

An experimental study of water droplets deformation and collision with airfoil

2020 ◽  
Vol 34 (14n16) ◽  
pp. 2040094
Author(s):  
Wen Li ◽  
Bo Miao ◽  
Chun-Ling Zhu ◽  
Ning Zhao
Keyword(s):  
Experimental Study ◽  
Weber Number ◽  
High Speed ◽  
Leading Edge ◽  
Deformation Mode ◽  
Water Droplets ◽  
Droplet Deformation ◽  
Naca0012 Airfoil ◽  
Droplet Movement ◽  
Pass Through

When aircraft pass through the clouds that contain super cooled water droplets during aviation, the droplets collide with the wing surface and ice is formed, which induces a significant threat to aviation safety. Studies on droplet movement in gaseous medium are prerequisite for deicing/anti-icing researches. So, in this work, an experimental study is performed on water droplet deformation as the droplets approach the leading edge of an airfoil. This experiment is carried out in a vertical wind tunnel, with a NACA0012 airfoil model assembled 4.3 m downstream of the droplet generator. The influence of Weber number (ranging from 0.2 to 36) on the deformation of a 2 mm diameter droplet is thoroughly investigated. The results indicate that droplets maintain initial form with Weber number under 10; after that droplet deforms into remarkable bag deformation as Weber number reaches to 19, and bag-stamen deformation mode as Weber number is above 20. This observed correlation between Weber number and deformation mode is validated through comparing with published simulation results. Furthermore, using the high-speed camera, clear images of the droplet structure during the deformation process are taken and are shown in detail in this work.

Experimental study of heat transfer in the boundary layer of a flat plate with the impact of weak shock waves on the leading edge

2020 ◽  
Author(s):  
V. L. Kocharin ◽  
A. A. Yatskikh ◽  
D. S. Prishchepova ◽  
A. V. Panina ◽  
Yu. G. Yermolaev ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Boundary Layer ◽  
Experimental Study ◽  
Shock Waves ◽  
Flat Plate ◽  
Leading Edge ◽  
Weak Shock ◽  
The Impact

Flow Control for an Airfoil with Leading-Edge Rotation: An Experimental Study

2000 ◽  
Vol 37 (4) ◽  
pp. 617-622 ◽  
Author(s):  
Ahmed Z. Al-Garni ◽  
Abdullah M. Al-Garni ◽  
Saad A. Ahmed ◽  
Ahmet Z. Sahin
Keyword(s):  
Experimental Study ◽  
Flow Control ◽  
Leading Edge

ANALYSIS OF A HETEROGENEOUS DOMAIN DECOMPOSITION FOR COMPRESSIBLE VISCOUS FLOW

2001 ◽  
Vol 11 (04) ◽  
pp. 565-599 ◽  
Author(s):  
CRISTIAN A. COCLICI ◽  
WOLFGANG L. WENDLAND
Keyword(s):  
Domain Decomposition ◽  
Stokes Equations ◽  
Domain Decomposition Method ◽  
Near Field ◽  
Outer Region ◽  
Navier Stokes ◽  
Far Field ◽  
Computational Domain ◽  
Linearized Euler Equations ◽  
Naca0012 Airfoil

We analyze a nonoverlapping domain decomposition method for the treatment of two-dimensional compressible viscous flows around airfoils. Since at some distance to the given profile the inertial forces are strongly dominant, there the viscosity effects are neglected and the flow is assumed to be inviscid. Accordingly, we consider a decomposition of the original flow field into a bounded computational domain (near field) and a complementary outer region (far field). The compressible Navier–Stokes equations are used close to the profile and are coupled with the linearized Euler equations in the far field by appropriate transmission conditions, according to the physical properties and the mathematical type of the corresponding partial differential equations. We present some results of flow around the NACA0012 airfoil and develop an a posteriori analysis of the approximate solution, showing that conservation of mass, momentum and energy are asymptotically attained with the linear model in the far field.

Wake-Airfoil Interaction as Broadband Noise Source: A Large-Eddy Simulation Study

2005 ◽  
Vol 4 (1-2) ◽  
pp. 93-115 ◽  
Author(s):  
Jérôme Boudet ◽  
Nathalie Grosjean ◽  
Marc C. Jacob
Keyword(s):  
Large Eddy Simulation ◽  
Particle Image ◽  
Broadband Noise ◽  
Far Field ◽  
Acoustic Analogy ◽  
Eddy Simulation ◽  
Naca0012 Airfoil ◽  
Image Velocimetry ◽  
Large Eddy ◽  
Proper Orthogonal

A large-eddy simulation is carried out on a rod-airfoil configuration and compared to an accompanying experiment as well as to a RANS computation. A NACA0012 airfoil (chord c = 0.1 m) is located one chord downstream of a circular rod (diameter d = c/10, Red = 48 000). The computed interaction of the resulting sub-critical vortex street with the airfoil is assessed using averaged quantities, aerodynamic spectra and proper orthogonal decomposition (POD) of the instantaneous flow fields. Snapshots of the flow field are compared to particle image velocimetry (PIV) data. The acoustic far field is predicted using the Ffowcs Williams & Hawkings acoustic analogy, and compared to the experimental far field spectra. The large-eddy simulation is shown to accurately represent the deterministic pattern of the vortex shedding that is described by POD modes 1 & 2 and the resulting tonal noise also compares favourably to measurements. Furthermore higher order POD modes that are found in the PIV data are well predicted by the computation. The broadband content of the aerodynamic and the acoustic fields is consequently well predicted over a large range of frequencies ([0 kHz; 10 kHz]).

Numerical investigation of an anti-icing method on airfoil based on the NSDBD plasma actuator

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Junjie Niu ◽  
Weimin Sang ◽  
Feng Zhou ◽  
Dong Li
Keyword(s):  
Phenomenological Model ◽  
Stokes Equations ◽  
Pulse Repetition Frequency ◽  
Leading Edge ◽  
Pulse Frequency ◽  
Plasma Actuator ◽  
Navier Stokes ◽  
Peak Voltage ◽  
Content Type ◽  
Naca0012 Airfoil

Purpose This paper aims to investigate the anti-icing performance of the nanosecond dielectric barrier discharge (NSDBD) plasma actuator. Design/methodology/approach With the Lagrangian approach and the Messinger model, two different ice shapes known as rime and glaze icing are predicted. The air heating in the boundary layer over a flat plate has been simulated using a phenomenological model of the NSDBD plasma. The NSDBD plasma actuators are planted in the leading edge anti-icing area of NACA0012 airfoil. Combining the unsteady Reynolds-averaged Navier–Stokes equations and the phenomenological model, the flow field around the airfoil is simulated and the effects of the peak voltage, the pulse repetition frequency and the direction arrangement of the NSDBD on anti-icing performance are numerically investigated, respectively. Findings The agreement between the numerical results and the experimental data indicates that the present method is accurate. The results show that there is hot air covering the anti-icing area. The increase of the peak voltage and pulse frequency improves the anti-icing performance, and the direction arrangement of NSDBD also influences the anti-icing performance. Originality/value A numerical strategy is developed combining the icing algorithm with the phenomenological model. The effects of three parameters of NSDBD on anti-icing performance are discussed. The predicted results show that the anti-icing method is effective and may be helpful for the design of the anti-icing system of the unmanned aerial vehicle.

Comparison of Two Active Flow Control Mechanisms of Pure Blowing and Pure Suction on a Pitching NACA0012 Airfoil at Reynolds Number of 1 × 106

2018 ◽  
Author(s):  
Ehsan Asgari ◽  
Mehran Tadjfar
Keyword(s):  
Reynolds Number ◽  
Flow Control ◽  
Active Flow Control ◽  
Hysteresis Loops ◽  
Leading Edge ◽  
Control Mechanisms ◽  
Airfoil Surface ◽  
Naca0012 Airfoil ◽  
Maximum Angle ◽  
Active Flow

In this study, we have applied and compared two active flow control (AFC) mechanisms on a pitching NACA0012 airfoil at Reynolds number of 1 × 106 using 2-D computational fluid dynamics (CFD). These mechanisms are continuous blowing and suction which are applied separately on the airfoil which pitches around its quarter-chord in a sinusoidal motion. The location for suction and blowing was determined in our previous study based on the formation of a counter clock-wise vortex near the leading-edge. In our current study, we have compared the effectiveness of pure blowing and pure suction in suppressing the dynamic stall vortex (DSV) which is the main contributor to the drag increase, particularly near the maximum angle of attack (AOA) and in early downstroke motion. The blowing/suction slot is considered as a dent on the airfoil surface which enables the AFC to perform in a tangential manner. This configuration would allow blowing jet to penetrate further downstream and was shown to be more effective compared to a cross-flow orientation. We have compared the two aforementioned mechanisms in terms of hysteresis loops of lift and drag coefficients and have demonstrated the dynamics of flow in controlled and uncontrolled situations.

Numerical investigation of aerodynamic and acoustic characteristics of bionic airfoils inspired by bird wing

2018 ◽  
Vol 233 (11) ◽  
pp. 4004-4016 ◽  
Author(s):  
Menghao Wang ◽  
Xiaomin Liu
Keyword(s):  
Sound Pressure Level ◽  
Sound Pressure ◽  
Leading Edge ◽  
Pressure Level ◽  
Aerodynamic Noise ◽  
Small Scale ◽  
Airfoil Surface ◽  
Acoustic Characteristics ◽  
Bionic Coupling ◽  
Bionic Airfoil

Airfoil is the basic element of fluid machinery and aircraft, and the noise generated from that is an important research aspect. Aiming to reduce the aerodynamic noise around the airfoil, this study proposes an airfoil inspired by the long-eared owl wing and another airfoil coupled with the bionic airfoil profile, leading edge waves, and trailing edge serrations. Numerical simulations dependent on the large eddy simulation method coupled with the wall-adapting local eddy-viscosity model and the Ffowcs Williams and Hawkings equation are conducted to compare the aerodynamic and acoustic characteristics of two types of bionic airfoils at low Reynolds number condition. The simulations reveal the dipole characteristic of acoustic source and sound pressure level distribution at various frequencies. Two types of bionic airfoils show lower noise compared with the conventional NACA 0012 airfoil with a similar relative thickness of 12%. Compared with the bionic airfoil, the average value of sound pressure level at the monitoring points around the bionic coupling airfoil is decreased by 9.94 dB, meanwhile the lift-to-drag ratio also keep higher. The bionic coupling airfoil exerts a suppression of sound pressure fluctuation on the airfoil surfaces, which result from that the range and size of separation vortices are reduced and the distance between vortices and airfoil surface are increased. The tube-shaped vortices in the wake of airfoil are effectively restrained and split into small scale vortices, which are important to cause less aerodynamic noise around the bionic coupling airfoil. Consequently, a novel bionic coupling airfoil is developed with the excellent aerodynamic and acoustic performance.

Sign in / Sign up

Export Citation Format

Share Document