Breaking Oil Recovery Limit in Malaysian Thin Oil Rim Reservoirs: Water Injection Optimization

2011 ◽  
Author(s):  
Keng Seng Chan ◽  
Azmukiff Muhammed Kifli ◽  
Nasir B. Darman
Keyword(s):  
Oil Recovery ◽  
Water Injection ◽  
Oil Rim

Transforming Water Injection Process With Real Time Automation

2021 ◽  
Author(s):  
Muhammad Zakwan Mohd Sahak ◽  
Eugene Castillano ◽  
Tengku Amansyah Tuan Mat ◽  
Maung Maung Myo Thant
Keyword(s):  
Oil Recovery ◽  
Capital Investment ◽  
Water Injection ◽  
Optimal Operation ◽  
Near Miss ◽  
Injection System ◽  
Injection Technique ◽  
Manual Operation ◽  
Injection Process ◽  
Oil Rim

Abstract For mature fields, water injection is one of the widely deployed techniques to ensure continuous oil recovery from the reservoir by maintaining the reservoir pressure, oil rim and pushing the oil from injection to production wells. Thus, it is critical to ensure a continuous and reliable operation of water injection to have consistent and sustainable rate. This paper demonstrates the new approach, utilizing automation and digital technology providing operational improvement and reduction in unplanned production deferment (UPD). One of the methods to effectively manage the water injection operation is via automation of injection process, especially since most of the water injection facilities still rely heavily on manual operation. First, a discussion on typical water injection technique is discussed. Challenges and sub-optimal operation of water injection processes within the company and industry are analysed. Then, the designing of a fully automated water injection system, such as equipment availability and constraints in matching and responding to well injection requirement are demonstrated. While an immediate adoption of process automation to mature assets may be faced with challenges such as system readiness, hardware availability, capital investment and mindset change, a step-by-step approach such as guided operation and semi-auto operation is explored as preparation prior to a full automation roll-out. With the shift from manual operation reliance to automation, the response time to process changes is improved leading to reduction in near-miss and trip cases, and minimum unplanned deferment.

RESERVOIR SIMULATION IN THE MEREENIE FIELD

1986 ◽  
Vol 26 (1) ◽  
pp. 428
Author(s):  
B.F. Towler
Keyword(s):  
Oil Recovery ◽  
Reservoir Simulation ◽  
Water Injection ◽  
Gas Oil ◽  
The North ◽  
Stock Tank ◽  
Bottom Hole Flowing Pressure ◽  
Steep Decline ◽  
Oil Rim ◽  
Reservoir Simulator

The Mereenie Field in the Amadeus Basin was discovered in 1964 and contains an estimated 240 million barrels of oil and 480 billion (USA) cubic feet of gas in three formations. The field commenced production at 1500 barrels of oil per day from seven wells in September 1984. The structure is large and elongated and the oil in the permeable sands appears as a rim round the structure. This paper describes a reservoir simulation study initiated to evaluate the recovery of oil from wells sited on the north and south flanks of the anticline where the steep dips cause the oil rim to become very narrow.Ten studies were made on a 21 × 15 cell pattern model using a three phase semi-implicit black oil reservoir simulator. The ten runs compared oil recovery and gas/oil ratio as a function of formation dip, bottom hole flowing pressure, gas injection and water injection. These showed that the flank wells could be expected to recover 300 000 stock tank barrels of oil from primary and secondary operations which represents about 25 per cent of the oil in place for wells sited on half mile spacings. However the wells will experience high gas/oil ratios and a steep decline in oil rate.

scholarly journals A Numerical Method for Computing Recovery of Oil By Hot Water Injection in a Radial System

1965 ◽  
Vol 5 (02) ◽  
pp. 131-140 ◽  
Author(s):  
K.P. Fournier
Keyword(s):  
Thermal Expansion ◽  
Oil Recovery ◽  
Viscosity Ratio ◽  
Water Injection ◽  
Injection Rate ◽  
Heat Losses ◽  
Hot Water ◽  
Radial System ◽  
System Equation ◽  
Finite Difference Equations

Abstract This report describes work on the problem of predicting oil recovery from a reservoir into which water is injected at a temperature higher than the reservoir temperature, taking into account effects of viscosity-ratio reduction, heat loss and thermal expansion. It includes the derivation of the equations involved, the finite difference equations used to solve the partial differential equation which models the system, and the results obtained using the IBM 1620 and 7090–1401 computers. Figures and tables show present results of this study of recovery as a function of reservoir thickness and injection rate. For a possible reservoir hot water flood in which 1,000 BWPD at 250F are injected, an additional 5 per cent recovery of oil in place in a swept 1,000-ft-radius reservoir is predicted after injection of one pore volume of water. INTRODUCTION The problem of predicting oil recovery from the injection of hot water has been discussed by several researchers.1–6,19 In no case has the problem of predicting heat losses been rigorously incorporated into the recovery and displacement calculation problem. Willman et al. describe an approximate method of such treatment.1 The calculation of heat losses in a reservoir and the corresponding temperature distribution while injecting a hot fluid has been attempted by several authors.7,8 In this report a method is presented to numerically predict the oil displacement by hot water in a radial system, taking into account the heat losses to adjacent strata, changes in viscosity ratio with temperature and the thermal-expansion effect for both oil and water. DERIVATION OF BASIC EQUATIONS We start with the familiar Buckley-Leverett9 equation for a radial system:*Equation 1 This can be written in the formEquation 2 This is sometimes referred to as the Lagrangian form of the displacement equation.

Carbonated Water Injection for Recovery of Oil and Wettability Analysis

2014 ◽  
Vol 695 ◽  
pp. 499-502 ◽  
Author(s):  
Mohamad Faizul Mat Ali ◽  
Radzuan Junin ◽  
Nor Hidayah Md Aziz ◽  
Adibah Salleh
Keyword(s):  
Oil Recovery ◽  
Oil And Gas ◽  
Promising Result ◽  
Water Injection ◽  
High Mobility ◽  
Wettability Alteration ◽  
Sweep Efficiency ◽  
Gas Flooding ◽  
Carbonated Water Injection ◽  
Carbonated Water

Malaysia oilfield especially in Malay basin has currently show sign of maturity phase which involving high water-cut and also pressure declining. In recent event, Malaysia through Petroliam Nasional Berhad (PETRONAS) will be first implemented an enhanced oil recovery (EOR) project at the Tapis oilfield and is scheduled to start operations in 2014. In this project, techniques utilizing water-alternating-gas (WAG) injection which is a type of gas flooding method in EOR are expected to improve oil recovery to the field. However, application of gas flooding in EOR process has a few flaws which including poor sweep efficiency due to high mobility ratio of oil and gas that promotes an early breakthrough. Therefore, a concept of carbonated water injection (CWI) in which utilizing CO2, has ability to dissolve in water prior to injection was applied. This study is carried out to assess the suitability of CWI to be implemented in improving oil recovery in simulated sandstone reservoir. A series of displacement test to investigate the range of recovery improvement at different CO2 concentrations was carried out with different recovery mode stages. Wettability alteration properties of CWI also become one of the focuses of the study. The outcome of this study has shown a promising result in recovered residual oil by alternating the wettability characteristic of porous media becomes more water-wet.

Novel Insights into Mechanisms of Oil Recovery by Low Salinity Water Injection

2015 ◽  
Author(s):  
M. Sohrabi ◽  
P. Mahzari ◽  
S. A. Farzaneh ◽  
J. R. Mills ◽  
P. Tsolis ◽  
...  
Keyword(s):  
Oil Recovery ◽  
Water Injection ◽  
Low Salinity ◽  
Low Salinity Water ◽  
Salinity Water ◽  
Low Salinity Water Injection
Sign in / Sign up

Export Citation Format

Share Document