Genetic associations between feed efficiency measured in a performance test station and performance of growing cattle in commercial beef herds

2011 ◽  
Vol 89 (11) ◽  
pp. 3382-3393 ◽  
Author(s):  
J. J. Crowley ◽  
R. D. Evans ◽  
N. Mc Hugh ◽  
T. Pabiou ◽  
D. A. Kenny ◽  
...  
Keyword(s):  
Feed Efficiency ◽  
Performance Test ◽  
Genetic Associations ◽  
Growing Cattle ◽  
Beef Herds ◽  
And Performance ◽  
A Performance

PSVI-20 Extent of genetic variation in feeding behavior and genetic associations with performance and feed efficiency in crossbred growing cattle

2021 ◽  
Vol 99 (Supplement_3) ◽  
pp. 233-234
Author(s):  
David N Kelly ◽  
Roy D Sleator ◽  
Craig P Murphy ◽  
Stephen B Conroy ◽  
Donagh P Berry
Keyword(s):  
Genetic Variation ◽  
Feeding Behavior ◽  
Energy Intake ◽  
Feed Efficiency ◽  
Fixed Effects ◽  
Feeding Rate ◽  
Feeding Time ◽  
Genetic Associations ◽  
Event Duration ◽  
Growing Cattle

Abstract To the best of our knowledge, the genetic variability in feeding behavior, as well as relationships with performance and feed efficiency, has not been investigated in a cattle population of greater than 1,500 animals. Our objective was to quantify the genetic parameters of several feeding behavior traits, and their genetic associations with both performance and feed efficiency traits, in crossbred growing cattle. Feed intake and live-weight data were available on 6,088 bulls, steers and heifers; of these, 4,672 cattle had backfat and muscle ultrasound data, and 1,548 steers and heifers had feeding behavior data. Genetic (co)variance parameters were estimated using animal linear mixed models; fixed effects included test group, heterosis, recombination loss, dam parity, age in months at the end of test, and the two-way interaction between age in months at the end of test and sex. Heritability was estimated to be 0.51 (0.097), 0.61 (0.100), 0.44 (0.093), 0.48 (0.094), and 0.47 (0.095) for feed events per day, feeding time per day, feeding rate, feed event duration, and energy intake per feed event, respectively. Coefficients of genetic variation ranged from 0.11 (feeding time per day) to 0.22 (feed event duration). Genetically heavier cattle with a higher energy intake per day, and faster growth rate, had a faster feeding rate and a greater energy intake per feed event. Genetic correlations between feeding behavior and feed efficiency were generally not different from zero, however, there was a genetic correlation of 0.36 (0.11) between feeding time per day and residual energy intake. Significant heritable and exploitable genetic variation exists in several feeding behavior traits in crossbred growing cattle which are also correlated with several performance traits. As some feeding behavior traits may be relatively less resource intensive to measure, they could be useful as predictor traits in beef cattle genetic evaluations.

scholarly journals Test post-weaning duration for performance, feed intake and feed efficiency in Nellore cattle

2011 ◽  
Vol 40 (2) ◽  
pp. 301-307 ◽  
Author(s):  
André Michel de Castilhos ◽  
Renata Helena Branco ◽  
Alexander George Razook ◽  
Sarah Figueiredo Martins Bonilha ◽  
Maria Eugênia Zerlotti Mercadante ◽  
...  
Keyword(s):  
Feed Intake ◽  
Feed Efficiency ◽  
Dry Matter ◽  
Performance Test ◽  
Average Daily Gain ◽  
Dry Matter Intake ◽  
Test Duration ◽  
Nellore Cattle ◽  
And Performance ◽  
Daily Gain

This study was conducted to determine optimum test duration for measuring performance, feed intake and feed efficiency. Sixty young Nellore bulls were submitted to feeding performance test and fed in individual pens to determine feed intake and performance over 112 days. Body weight was determined every 28 days, after fasting of water and feed for 16 hours. Changes in variance, relative variance and Pearson and Spearman correlations among data from shortened test periods (28, 56 and 84 days) and full test period (112 days) were used to determine optimum test duration. Test duration for average daily gain, dry matter intake, feed:gain ratio and residual feed intake could be shortened to 84, 28, 84 and 84 days, respectively, without reducing significantly the reliability of measurements for animals fed in individual pens.

Rancang Bangun Alat Olahan Minyak Kelapa

2016 ◽  
Vol 10 (1) ◽  
pp. 70-77
Author(s):  
Jantri Sirait ◽  
Sulharman Sulharman
Keyword(s):  
Electric Motor ◽  
Performance Test ◽  
Production Capacity ◽  
Coconut Oil ◽  
Heating Time ◽  
Design Tool ◽  
Coconut Milk ◽  
Heating Process ◽  
And Performance ◽  
Time Required

Has done design tool is a tool of refined coconut oil coconut grater, squeezer coconut milk and coconut oil heating, with the aim to streamline the time of making coconut oil and coconut oil increase production capacity. The research method consists of several stages, among others; image creation tool, procurement of materials research, cutting the material - the material framework of tools and performance test tools. The parameters observed during the performance test tools is time grated coconut, coconut milk bleeder capacity, the capacity of the boiler and the heating time of coconut oil. The design tool consists of three parts, namely a tool shaved coconut, coconut milk wringer and coconut milk heating devices. Materials used for the framework of such tools include iron UNP 6 meters long, 7.5 cm wide, 4 mm thick, while the motor uses an electric motor 0.25 HP 1430 rpm and to dampen the rotation electric motor rotation used gearbox with a ratio of round 1 : 60. the results of the design ie the time required for coconut menyerut average of 297 seconds, coconut milk wringer capacity of 5 kg of processes and using gauze pads to filter coconut pulp, as well as the heating process takes ± 2 hours with a capacity of 80 kg , The benefits of coconut oil refined tools are stripping time or split brief coconut average - average 7 seconds and coconut shell can be used as craft materials, processes extortion coconut milk quickly so the production capacity increased and the stirring process coconut oil mechanically.ABSTRAKTelah dilakukan rancang bangun alat olahan minyak kelapa yaitu alat pemarut kelapa, pemeras santan kelapa dan pemanas minyak kelapa, dengan tujuan untuk mengefisiensikan waktu pembuatan minyak kelapa serta meningkatkan kapasitas produksi minyak kelapa. Metode penelitian terdiri dari beberapa tahapan antara lain; pembuatan gambar alat, pengadaan bahan-bahan penelitian, pemotongan bahan - bahan rangka alat dan uji unjuk kerja alat. Parameter yang diamati pada saat uji unjuk kerja alat adalah waktu parut kelapa, kapasitas pemeras santan kelapa, kapasitas tungku pemanas serta waktu pemanasan minyak kelapa. Rancangan alat terdiri dari tiga bagian yaitu alat penyerut kelapa, alat pemeras santan kelapa dan alat pemanas santan kelapa. Bahan yang dipergunakan untuk rangka alat tersebut  yaitu besi UNP panjang 6 meter, lebar 7,5 cm, tebal 4 mm, sedangkan untuk motor penggerak menggunakan motor listrik 0,25 HP 1430 rpm dan untuk meredam putaran putaran motor listrik dipergunakan gearbox  dengan perbandingan putaran 1 : 60. Hasil dari rancangan tersebut yaitu waktu yang dibutuhkan untuk menyerut kelapa rata-rata 297 detik, kapasitas alat pemeras santan kelapa 5 kg sekali proses dan menggunakan kain kassa untuk menyaring ampas kelapa, serta Proses pemanasan membutuhkan waktu ± 2 jam dengan kapasitas 80 kg. Adapun keunggulan alat olahan minyak kelapa ini adalah waktu pengupasan atau belah kelapa singkat rata – rata 7 detik dan tempurung kelapa dapat digunakan sebagai bahan kerajinan, proses pemerasan santan kelapa cepat sehingga kapasitas produksi meningkat dan proses pengadukan minyak kelapa secara mekanis. Kata kunci : penyerut, pemeras, pemanas,minyak kelapa,olahan minyak kelapa.

scholarly journals Design and performance test of variable diameter threshing drum of combine harvester

2021 ◽  
Author(s):  
Zhan Su ◽  
Zhao Ding ◽  
Liquan Tian ◽  
Xue Lin ◽  
Zhiming Wang
Keyword(s):  
Performance Test ◽  
Variable Diameter ◽  
Combine Harvester ◽  
And Performance

Physical and performance characteristics related to starter status, position, and division in Japanese collegiate American-football players

2021 ◽  
pp. 1-8
Author(s):  
Junta Iguchi ◽  
Minoru Matsunami ◽  
Tatsuya Hojo ◽  
Yoshihiko Fujisawa ◽  
Kenji Kuzuhara ◽  
...  
Keyword(s):  
Performance Test ◽  
Vertical Jump ◽  
American Football ◽  
Football Players ◽  
Jump Height ◽  
Test Results ◽  
Repetition Maximum ◽  
Vertical Jump Height ◽  
Division 1 ◽  
And Performance

BACKGROUND: Few studies have investigated the variations in body composition and performance in Japanese collegiate American-football players. OBJECTIVE: To clarify what characterizes competitors at the highest levels – in the top division or on the starting lineup – we compared players’ body compositions and performance test results. METHODS: This study included 172 players. Each player’s body composition and performance (one-repetition maximum bench press, one-repetition maximum back squat, and vertical jump height) were measured; power was estimated from vertical jump height and body weight. Players were compared according to status (starter vs. non-starter), position (skill vs. linemen), and division (1 vs. 2). Regression analysis was performed to determine characteristics for being a starter. RESULTS: Players in higher divisions and who were starters were stronger and had more power, greater body size, and better performance test results. Players in skill positions were relatively stronger than those in linemen positions. Vertical jump height was a significant predictor of being a starter in Division 1. CONCLUSION: Power and vertical jump may be a deciding factor for playing as a starter or in a higher division.

scholarly journals Development of High-Performance Face Gear Set (Machining and Performance Test)

2011 ◽  
Vol 77 (775) ◽  
pp. 573-581
Author(s):  
Isamu TSUJI ◽  
Hiroshi GUNBARA ◽  
Kazumasa KAWASAKI ◽  
Yoshikazu ABE ◽  
Kazutaka SUZUKI ◽  
...  
Keyword(s):  
High Performance ◽  
Performance Test ◽  
Face Gear ◽  
And Performance

scholarly journals 268 Administering an appeasing substance to optimize welfare and performance of receiving cattle

2020 ◽  
Vol 98 (Supplement_4) ◽  
pp. 193-193
Author(s):  
Eduardo Colombo ◽  
Reinaldo F Cooke ◽  
Alice Brandão ◽  
Jacob Wiegand ◽  
Kelsey Schubach ◽  
...  
Keyword(s):  
Feed Intake ◽  
Feed Efficiency ◽  
Treatment Effects ◽  
Average Daily Gain ◽  
Plasma Concentrations ◽  
Feedlot Cattle ◽  
Skin Area ◽  
And Performance ◽  
Antimicrobial Treatments ◽  
Daily Gain

Abstract This experiment evaluated the impacts of bovine appeasing substance (BAS) administration on performance, health, and physiological responses of feedlot cattle during a 45-d receiving period. A total of 342 recently-weaned Angus-influenced steers, originating from 16 cow-calf operations, were obtained from an auction yard on d -1 and road-transported (12 h) to the feedlot. Upon arrival on d 0, body weight (BW) was recorded and steers were ranked by BW and source and assigned to receive BAS (Nutricorp, Araras, SP, Brazil; n = 171) or placebo (diethylene glycol monoethyl ether; CON; n = 171). Treatments (5 mL) were topically applied to the nuchal skin area of each animal. Within treatment, calves were allocated to 1 of 24 drylot pens (12 pens/treatment) and received a free choice total-mixed ration from d 1 to 45. Calves were assessed for bovine respiratory disease (BRD) signs and feed intake was recorded from each pen daily. Steer BW was again recorded on d 1, 7, 17, 31, and 45, whereas blood samples were collected from 5 steers/pen concurrently with each BW assessment. Average daily gain was greater (P = 0.05) in BAS vs. CON calves, although final BW did not differ (P = 0.36) between treatments. No treatment effects were detected for feed intake (P = 0.95), resulting in greater (P = 0.05) feed efficiency in BAS vs. CON steers. No treatment effects were detected (P ≥ 0.37) for plasma concentrations of haptoglobin, whereas plasma cortisol concentrations were greater (P = 0.05) in CON vs. BAS steers on d 7 (treatment × day; P = 0.07). Incidence of BRD was greater (P ≤ 0.05) in BAS vs. CON on d 6 to 10 and d 18 to 21 (treatment × day; P < 0.01), although overall BRD incidence did not differ (P = 0.24) between treatments. The number of antimicrobial treatments required per steer diagnosed with BRD symptoms to recover from sickness was greater (P = 0.04) in CON vs. BAS calves. No treatment differences were detected (P ≥ 0.41) for mortality incidence, or proportion of steers removed from the experiment due to extreme sickness. Results from this experiment indicate BAS administration upon feedlot entry improved average daily gain by enhancing feed efficiency. Administration of BAS facilitated earlier detection of BRD and reduced the need for antimicrobial treatments. Collectively, these results suggest BAS administration as a promising strategy to benefit performance and immunocompetence of feedlot receiving cattle.

Performance of Asphalt Mixture Used for Asphalt Treated Base of Perpetual Pavements

2011 ◽  
Vol 415-417 ◽  
pp. 1531-1536
Author(s):  
Fu Ming Liu ◽  
Duan Yi Wang
Keyword(s):  
Tensile Strain ◽  
Performance Test ◽  
Asphalt Mixture ◽  
Fatigue Tests ◽  
Asphalt Pavements ◽  
Moisture Susceptibility ◽  
Scale Test ◽  
And Performance ◽  
Wheel Tracking ◽  
Fatigue Endurance

This paper presents the results of laboratory and performance tests for an asphalt treated base (ATB) and mixes developed in this study for perpetual asphalt pavements. Laboratory tests for the mixes included moisture susceptibility, wheel tracking and fatigue tests. The results of performance test indicated that the resistances of the high content binder ATB against moisture and fatigue damage were better than those of the lower one. It was also found from the full scale test sections that the tensile strain values at the bottom of the asphalt layer for the ATB sections were low when the asphalt layer thicknesses of the ATB sections were not thicker than those of the conventional sections. All the tensile strain values measured from the ATB sections were within the fatigue endurance limit of 70 microstrain which is the fatigue criterion of a perpetual asphalt pavement.

Sign in / Sign up

Export Citation Format

Share Document