scholarly journals On the thermodynamic consistency of experimentally determined fluid properties

2020 ◽  
Author(s):  
Enrico Pasquini ◽  
◽  
Hubertus Murrenhoff ◽  
Katharina Schmitz ◽  
◽  
...  
2019 ◽  
Vol 2 (1) ◽  
pp. 29-39 ◽  
Author(s):  
S. G. Konesev ◽  
P. A. Khlyupin

Introduction: the systems of thermal effects on thermo-dependent, viscous and highly viscous liquids under conditions of the Arctic and the Extreme North are considered. Low efficiency and danger of heating systems based on burned hydrocarbons, heated liquids and steam are shown. Electrothermal heating systems used to maintain thermo-dependent fluids in a fluid state are considered. The evaluation of the effectiveness of the application of the most common electrothermal system — heating cables (tapes). The most effective electrothermal system based on induction technologies has been determined. Materials and methods: considered methods of thermal exposure to maintain the fluid properties of thermo-dependent fluids at low extreme temperatures. Results: presents an induction heating system and options for its implementation in the Extreme North and the Arctic. Conclusions: induction heating system to minimize loss of product quality, improve the system performance under changing process conditions, eliminate fire product, to reduce the influence of the human factor.


2017 ◽  
Vol 3 (1) ◽  
pp. 112-126 ◽  
Author(s):  
Ilaria Cristofaro

From a phenomenological perspective, the reflective quality of water has a visually dramatic impact, especially when combined with the light of celestial phenomena. However, the possible presence of water as a means for reflecting the sky is often undervalued when interpreting archaeoastronomical sites. From artificial water spaces, such as ditches, huacas and wells to natural ones such as rivers, lakes and puddles, water spaces add a layer of interacting reflections to landscapes. In the cosmological understanding of skyscapes and waterscapes, a cross-cultural metaphorical association between water spaces and the underworld is often revealed. In this research, water-skyscapes are explored through the practice of auto-ethnography and reflexive phenomenology. The mirroring of the sky in water opens up themes such as the continuity, delimitation and manipulation of sky phenomena on land: water spaces act as a continuation of the sky on earth; depending on water spaces’ spatial extension, selected celestial phenomena can be periodically reflected within architectures, so as to make the heavenly dimension easily accessible and a possible object of manipulation. Water-skyscapes appear as specular worlds, where water spaces are assumed to be doorways to the inner reality of the unconscious. The fluid properties of water have the visual effect of dissipating borders, of merging shapes, and, therefore, of dissolving identities; in the inner landscape, this process may represent symbolic death experiences and rituals of initiation, where the annihilation of the individual allows the creative process of a new life cycle. These contextually generalisable results aim to inspire new perspectives on sky-and-water related case studies and give value to the practice of reflexive phenomenology as crucial method of research.


2011 ◽  
pp. 20-24
Author(s):  
Thi My Dung Ha ◽  
Ngoc Thanh Cao ◽  
Thi Song Huong Tran

Objective: To characterize ultrasound images of placenta and amniotic fluid in cases of singleton pregnancies beyond term predictions, and also explore the relationship between placenta, amniotic fluid and labor transfer status, postpartum child status. Image properties of prenatal placenta and amniotic fluid are immediately examined with ultrasound in 267 cases of postterm pregnancy beyond prediction at Obstetric Department, Hue Central Hospital. Results: In postterm pregnancy, placenta thickness decreases gradually according to gestational age. Oligohydramnios is 30.3%. There is a correlation between amniotic fluid index and birth method with r = 0.41. Sensitivity is 89.15%. Specificity is 48.55%. There is also a correlation between amniotic fluid echogenicity and method of birth: r = 0.478. Sensitivity is 97.67%. Specificity is 42.75%. Amniotic fluid index and baby Clifford's syndrome are also relevant, with r=0.466. Sensitivity is 83.78%. Specificity is 78.26%. Conclusions: Ultrasound scanning of amniotic fluid properties should be noted in the case of postterm pregnancy.


1983 ◽  
Vol 23 (05) ◽  
pp. 727-742 ◽  
Author(s):  
Larry C. Young ◽  
Robert E. Stephenson

A procedure for solving compositional model equations is described. The procedure is based on the Newton Raphson iteration method. The equations and unknowns in the algorithm are ordered in such a way that different fluid property correlations can be accommodated leadily. Three different correlations have been implemented with the method. These include simplified correlations as well as a Redlich-Kwong equation of state (EOS). The example problems considered area conventional waterflood problem,displacement of oil by CO, andthe displacement of a gas condensate by nitrogen. These examples illustrate the utility of the different fluid-property correlations. The computing times reported are at least as low as for other methods that are specialized for a narrower class of problems. Introduction Black-oil models are used to study conventional recovery techniques in reservoirs for which fluid properties can be expressed as a function of pressure and bubble-point pressure. Compositional models are used when either the pressure. Compositional models are used when either the in-place or injected fluid causes fluid properties to be dependent on composition also. Examples of problems generally requiring compositional models are primary production or injection processes (such as primary production or injection processes (such as nitrogen injection) into gas condensate and volatile oil reservoirs and (2) enhanced recovery from oil reservoirs by CO or enriched gas injection. With deeper drilling, the frequency of gas condensate and volatile oil reservoir discoveries is increasing. The drive to increase domestic oil production has increased the importance of enhanced recovery by gas injection. These two factors suggest an increased need for compositional reservoir modeling. Conventional reservoir modeling is also likely to remain important for some time. In the past, two separate simulators have been developed and maintained for studying these two classes of problems. This result was dictated by the fact that compositional models have generally required substantially greater computing time than black-oil models. This paper describes a compositional modeling approach paper describes a compositional modeling approach useful for simulating both black-oil and compositional problems. The approach is based on the use of explicit problems. The approach is based on the use of explicit flow coefficients. For compositional modeling, two basic methods of solution have been proposed. We call these methods "Newton-Raphson" and "non-Newton-Raphson" methods. These methods differ in the manner in which a pressure equation is formed. In the Newton-Raphson method the iterative technique specifies how the pressure equation is formed. In the non-Newton-Raphson method, the composition dependence of certain ten-ns is neglected to form the pressure equation. With the non-Newton-Raphson pressure equation. With the non-Newton-Raphson methods, three to eight iterations have been reported per time step. Our experience with the Newton-Raphson method indicates that one to three iterations per tune step normally is sufficient. In the present study a Newton-Raphson iteration sequence is used. The calculations are organized in a manner which is both efficient and for which different fluid property descriptions can be accommodated readily. Early compositional simulators were based on K-values that were expressed as a function of pressure and convergence pressure. A number of potential difficulties are inherent in this approach. More recently, cubic equations of state such as the Redlich-Kwong, or Peng-Robinson appear to be more popular for the correlation Peng-Robinson appear to be more popular for the correlation of fluid properties. SPEJ p. 727


Author(s):  
Alexander Döß ◽  
Markus Schubert ◽  
Michael Wiezorek ◽  
Uwe Hampel ◽  
Felix Flegiel ◽  
...  
Keyword(s):  

Processes ◽  
2021 ◽  
Vol 9 (8) ◽  
pp. 1320
Author(s):  
Julia Sophie Böke ◽  
Daniel Kraus ◽  
Thomas Henkel

Reliable operation of lab-on-a-chip systems depends on user-friendly, precise, and predictable fluid management tailored to particular sub-tasks of the microfluidic process protocol and their required sample fluids. Pressure-driven flow control, where the sample fluids are delivered to the chip from pressurized feed vessels, simplifies the fluid management even for multiple fluids. The achieved flow rates depend on the pressure settings, fluid properties, and pressure-throughput characteristics of the complete microfluidic system composed of the chip and the interconnecting tubing. The prediction of the required pressure settings for achieving given flow rates simplifies the control tasks and enables opportunities for automation. In our work, we utilize a fast-running, Kirchhoff-based microfluidic network simulation that solves the complete microfluidic system for in-line prediction of the required pressure settings within less than 200 ms. The appropriateness of and benefits from this approach are demonstrated as exemplary for creating multi-component laminar co-flow and the creation of droplets with variable composition. Image-based methods were combined with chemometric approaches for the readout and correlation of the created multi-component flow patterns with the predictions obtained from the solver.


Sensors ◽  
2021 ◽  
Vol 21 (10) ◽  
pp. 3337
Author(s):  
Alberto Martín-Pérez ◽  
Daniel Ramos ◽  
Javier Tamayo ◽  
Montserrat Calleja

In this work we study the different phenomena taking place when a hydrostatic pressure is applied in the inner fluid of a suspended microchannel resonator. Additionally to pressure-induced stiffness terms, we have theoretically predicted and experimentally demonstrated that the pressure also induces mass effects which depend on both the applied pressure and the fluid properties. We have used these phenomena to characterize the frequency response of the device as a function of the fluid compressibility and molecular masses of different fluids ranging from liquids to gases. The proposed device in this work can measure the mass density of an unknown liquid sample with a resolution of 0.7 µg/mL and perform gas mixtures characterization by measuring its average molecular mass with a resolution of 0.01 atomic mass units.


Sign in / Sign up

Export Citation Format

Share Document