scholarly journals SIFAT FISIK MEKANIK PAPAN PARTIKEL DARI AMPAS SAGU (Metroxylon sp) BERDASARKAN UKURAN PARTIKEL DAN PERBANDINGAN ASAM SITRAT-SUKROSA

2019 ◽  
Vol 7 (1) ◽  
Author(s):  
. Wiwit ◽  
Dina Setyawati ◽  
Ahmad Yani ◽  
. Nurhaida
Keyword(s):  
Mechanical Properties ◽  
Particle Size ◽  
Citric Acid ◽  
Moisture Content ◽  
Physical Properties ◽  
Physical And Mechanical Properties ◽  
Dry Weight ◽  
Natural Adhesive ◽  
Density Values

The manufacture of particleboards from dregs of sago and natural adhesives of citric-sucrose acid has not been widely reported. The aim of this research to examine the physical and mechanical properties of particleboard from dregs of sago based on particle size and the ratio of citric-sucrose. The dregs of sago used is 8-10 mesh and 20-40 mesh. Natural adhesive is used 20% of the dry weight dregs of sago. The ratio of citric acid-sucrose used varies 0/100, 25/75, 50/50, 75/25, 100/0. The particleboard is made manually consisting of 3 layers (face, core, back) were manufactured in 30 cm x 30 cm x 1 cm, and the target of density was 0,7 g/cm3. The pressing at a temperature of 180oC for 15 minutes, and pressure of 20 kg/cm2. The physical and mechanical  properties of particleboard were tested in accordance to standard JIS A 5908-2003 Type 8. The results showed particleboard that physical properties meets the standards is density, moisture content, and thickness development. The particleboard dregs of sago with ratio citric acid-sucrose 25/75 was able to provide the best results to meet the standards of JIS A 5908-2003 Type 8 for density values of 0,7532 g/cm3, moisture content of 8,6725%, thickness of  development 8,0756%.Keywords: citric acid-sucrose , dregs of sago, particleboard, particle size

scholarly journals KUALITAS PAPAN PARTIKEL DARI KULIT BATANG SAGU (Metroxylon spp) DENGAN PEREKAT ALAMI ASAM SITRAT: SIFAT FISIK, SIFAT MEKANIK, DAN KEAWETAN TERHADAP RAYAP TANAH Coptotermes curvignathus Holmgren

2019 ◽  
Vol 8 (2) ◽  
Author(s):  
Dwi Cahyo Nugroho ◽  
Gusti Eva Tavita ◽  
Dina Setyawati
Keyword(s):  
Mechanical Properties ◽  
Weight Loss ◽  
Citric Acid ◽  
Moisture Content ◽  
Physical Properties ◽  
Internal Bond ◽  
Physical And Mechanical Properties ◽  
Subterranean Termites ◽  
Particle Board ◽  
Thickness Swelling

The study aimed to analyze the quality of particle boards from bark fiber of sago (Metroxylon spp) with citric acid as natural adhesives based on physical properties, mechanical properties, and durability from subterranean termites Coptotermes curvignathus Holmgren. Particle boards are made with a size of 30 cm x 30 cm x 1 cm. The experimental factors used in the study included densities (0.7 gr/cm3 and 0.8 gr/cm3) and concentrations of citric acid adhesives (20% and 30%). The material then flow into hotpress with 1800C for 15 minutes and pressure at 25 kg/cm2. Testing of the physical and mechanical properties of particle boards refers to the JIS A 5908-2003 standard and durability against subterranean termites Coptotermes curvignathus Holmgren was conducted based on SNI 01. 7207-2006. The results showed that the densities factor had a significant effect on density, thickness swelling, MOE, MOR, internal bond, screw holding strength, and weight loss of the particle board against termites. Meanwhile concentration of citric acid adhesive significantly affected the density, moisture content, water absorption, thickness swelling, MOR, internal bond, and screw holding strength. The interaction between the densities factor and concentration of citric acid has a significant effect on thickness swelling and density. The physical and mechanical properties of particle boards which fulfill the JIS A 5908 2003 standard were density, moisture content, MOR, and screw holding strength. The durability of particleboard againts termites has a very strong level. The average values of termites mortality were 94% ~ 100%. The average of wood weight loss values were 9.61%~ 18.51%. The particle board made with a density 0.8 gr/cm3 and concentration of citric acid adhesive 30% achieved the highest values on physical properties, mechanical properties and durability to the termites Coptotermes curvignathus. Keywords : citric acid, Coptotermes curvignathus, Metroxylon spp, particle board, sago

scholarly journals Tinjauan Karakteristik Tanah untuk Stabilisasi Lapis Pondasi Perkerasan Jalan

2017 ◽  
Vol 5 (2) ◽  
pp. 94-108
Author(s):  
Bambang Raharmadi
Keyword(s):  
Mechanical Properties ◽  
Specific Gravity ◽  
Moisture Content ◽  
Soil Stabilization ◽  
Ground Surface ◽  
Physical And Mechanical Properties ◽  
Dry Weight ◽  
Optimum Moisture Content ◽  
National Standard ◽  
Soil Color

The procedure carried out is testing the physical and mechanical properties of the soil from the quari of Bukit Batu village and quari of Manyawang hamlet based on the Indonesian National Standard (SNI). The purpose of the preparation of this paper was to determine the physical and mechanical properties of the soil from the quari of Bukit Batu village and quari dusun Manyawang so that it could be used as cement stabilization material. Quari soil test results in Bukit Batu village as deep as 1.5 meters from the ground surface with yellow brown soil color, 14.34% moisture content, 2.637 specific gravity and Manyawang quari dusun 1.25 meters from the ground with brownish yellow soil color water 13.80%, specific gravity 2.635. The grain size distribution test fulfilled the conditions allowed to be used as soil stabilization material for cement with a plasticity index of 5.41%, 6.21% = 10% of the specified conditions (Hicks, 2002) and the soil classification of the USCS system included in the CL-ML group namely non-organic silt, sandy clay with low plasticity and AASHTO were included in group A-4 namely silt clay with low plasticity. Quari compacting test (standard) in the village of Bukit Batu filled the maximum dry (?dmax) of the soil 1,860 t / m3, optimum moisture content of 13,30% and Manyawang maximum dry weight (mdmax) of soil 1,860 t / m3, optimum moisture content of 13.30%. Free compressive strength test (UCS) quari in Bukit Batu and Manyawang villages 3,451 kg / cm2, 3,521 kg / cm2 and CBR quari test in Bukit Batu and Manyawang villages CBR 100 9.40%, 8.10% and CBR 95 5.20%, 4.65%.

scholarly journals Bamboo as future bio-industrial material: Physical behaviour and bending strength of Malaysia’s Beting bamboo (Gigantochloa levis)

2022 ◽  
Vol 951 (1) ◽  
pp. 012001
Author(s):  
S Osman ◽  
M Ahmad ◽  
M N Zakaria ◽  
A M Zakaria ◽  
Z Ibrahim ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Specific Gravity ◽  
Moisture Content ◽  
Physical Properties ◽  
Dimensional Stability ◽  
Fiber Orientation ◽  
Bending Strength ◽  
Physical And Mechanical Properties ◽  
Timber Species ◽  
Industrial Material

Abstract In this paper, bending strength and physical properties (specific gravity, dimensional stability and equilibrium moisture content) of a Malaysian bamboo locally known as Beting bamboo (Gigantochloa levis) are addressed. Characterizations of physical and bending strength of G. levis in terms of the variability of location along culm height (top, middle, bottom), culm section (nodes and internodes), fiber orientation (longitudinal, tangential and radial) and culm layer (outer and inner) were conducted. Comparison of these properties is also made to some bamboo and commercial timber species. It was found that G. levis has favorable physical and mechanical properties although the specific gravity of G. levis has tendency to be on the higher side. The characteristics studied were found to have some variability at different locations, sections, and directions. There was variability in terms of bending strength along with the culm height of bamboo. It is indicated from this study that the bending strength and physical properties of G. levis were found to be satisfactory.

scholarly journals Utilization of Pitali (Trewia nudiflora) for Manufacturing Commercial Plywood in Bangladesh

1970 ◽  
Vol 43 (4) ◽  
pp. 581-587
Author(s):  
M Hasan Shahria ◽  
M Ashaduzzaman ◽  
M Iftekhar Shams ◽  
Arifa Sharmin ◽  
M Muktarul Islam
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Moisture Content ◽  
Physical Properties ◽  
Water Absorption ◽  
Linear Expansion ◽  
Urea Formaldehyde ◽  
Physical And Mechanical Properties ◽  
Thickness Swelling ◽  
Trewia Nudiflora

The study was conducted to find out the potentiality of Pitali (Trewia nudiflora) for manufacturing commercial plywood and evaluating its physical and mechanical properties. Two 9-ply plywood of 2.4m x 1.2m x 18mm size were manufactured using liquid urea formaldehyde adhesive. The physical and mechanical properties of T. nudiflora plywood were compared with the existing market available plywood manufactured by Simul (Bombax ceiba). It was found that density were 509.82 kg/m3 and 490.96 kg/m3, moisture content after curing were 10.67% and 17.61%, thickness swelling were 6.90% and 7.29%, linear expansion were 0.19% and 0.15%, water absorption were 50.89% and 64.79%, MOR were 29.94 N/mm2 and 27.05 N/mm2, MOE were 1613.89 N/mm2 and 1160.68 N/mm2, and tensile strength were 14.75 N/mm2 and 13.12 N/mm2 for T. nudiflora plywood and market plywood respectively. The evaluated physical and mechanical properties of T. nudiflora plywood were also compared with some relevant results and standards reported earlier. Key Words: Plywood, Trewia nudiflora, Physical properties, Mechanical properties. doi: 10.3329/bjsir.v43i4.2249 Bangladesh J. Sci. Ind. Res. 43(4),581-587, 2008

Physical and mechanical properties of hemp seed

2012 ◽  
Vol 26 (2) ◽  
pp. 211-215 ◽  
Author(s):  
A. Taheri-Garavand ◽  
A. Nassiri ◽  
S. Gharibzahedi
Keyword(s):  
Mechanical Properties ◽  
Moisture Content ◽  
Physical Properties ◽  
Loading Rate ◽  
Physical And Mechanical Properties ◽  
Interaction Effects ◽  
Mechanical Tests ◽  
Rupture Force ◽  
Hemp Seed ◽  
Effect Of Moisture

Physical and mechanical properties of hemp seedThe current study was conducted to investigate the effect of moisture content on the post-harvest physical and mechanical properties of hemp seed in the range of 5.39 to 27.12% d.b. Results showed that the effect of moisture content on the most physical properties of the grain was significant (P<0.05). The results of mechanical tests demonstrated that the effect of loading rate on the mechanical properties of hemp seed was not significant. However, the moisture content effect on rupture force and energy was significant (P<0.01). The lowest value of rupture force was obtained at the highest loading rate (3mm min-1)and in the moisture content of 27.12% d.b. Moreover, the interaction effects of loading rate and moisture content on the rupture force and energy of hemp seed were significant (P<0.05).

scholarly journals KELAS KUAT KAYU TUMIH (Combretocarpus rotundatus (Miq.) Danser) BERDASARKAN BAGIAN BATANG (The the physical and mechanical Properties of Tumih Wood Based on Section Stem)

HUTAN TROPIKA ◽  
2020 ◽  
Vol 14 (2) ◽  
pp. 80-88
Author(s):  
Admin JHT
Keyword(s):  
Mechanical Properties ◽  
Physical Properties ◽  
Raw Materials ◽  
Physical And Mechanical Properties ◽  
Dry Weight ◽  
Class Iii ◽  
Air Content ◽  
Wood Construction ◽  
Home Building ◽  
Tangential Shrinkage

Tumih wood (Combretocarpus rotundatus (Miq.) Danser) is classified as an unknowntype of wood which is widely grown in peat swamp forests in Central Kalimantan. Thisstudy aims to analyze the physical properties and mechanical properties of wood in axialand radial directions so that they can be utilized properly. The results of the studyresulted in fresh water content and dry air content of wood air, each of which was71,58% and 19,33%, kiln dry weight 0,72, tangential shrinkage 9,68%, radial shrinkage5,02% and longitudinal shrinkage 0,19%. Testing of mechanical properties resulted in aflexural firmness of 618,33 kg/cm2, compressive strength parallel to the fiber 333,27kg/cm2, shear constancy 92,02 kg/cm2, hardness 355,60 kg/cm2, and stiffness at 19,50kg/cm2. Based on the Indonesian Wood Construction Regulations Standard (PKKI) NI 5-1961 tumih wood is included as a strong class III of Indonesian wood, so it is quite wellused for home building raw materials, beams, floor and wall boards, door/windowframes, and furniture.Keywords: tumih wood, physical properties, and mechanical properties.

PEMANFAATAN KAYU AKASIA MANGIUM (Acacia mangium Willd) UNTUK MEBEL

2012 ◽  
Vol 4 (1) ◽  
pp. 1
Author(s):  
Djoko Purwanto
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Physical Properties ◽  
Treatment Process ◽  
Acacia Mangium ◽  
Physical And Mechanical Properties ◽  
Wood Fibers ◽  
Test Parameters ◽  
Mechanical And Physical Properties ◽  
Scale Scores

Timber Acacia mangium (Acacia mangium, Willd) for Furniture. The study aims to determine the mechanical and physical properties and the decorative value (color and fiber) wood of acacia mangium with using finishing materials. This type of finishing material used is ultran lasur natural dof ,ultran lasur classic teak, aqua politur clear dof, aqua politur akasia dan aqua politur cherry. After finishing the wood is stored for 3 months. Test parameters were observed, namely, physical and mechanical properties of wood, adhesion of finishing materials, color and appearance of the fiber, and timber dimensions expansion. The results showed that the mechanical physical properties of acacia wood qualified SNI. 01-0608-89 about the physical and mechanical properties of wood for furniture, air dry the moisture content from 13.78 to 14.89%, flexural strength from 509.25 to 680.50 kg/cm2, and compressive strength parallel to fiber 342.1 - 412.9 kg/cm2. Finishing the treatment process using five types of finishing materials can increase the decorative value (color and fiber) wood. Before finishing the process of acacia mangium wood has the appearance of colors and fibers and less attractive (scale scores 2-3), after finishing acacia wood fibers have the appearance of colors and interesting and very interesting (scale 4-5).Keywords: mangium wood, mechanical properties, decorative value, finishing, furniture.

BRUSH ALLOY 3

Alloy Digest ◽  
1983 ◽  
Vol 32 (3) ◽  
Keyword(s):  
Mechanical Properties ◽  
Thermal Conductivity ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Copper Alloy ◽  
Elevated Temperatures ◽  
Physical And Mechanical Properties ◽  
Heat Treating ◽  
Good Resistance ◽  
Good Corrosion Resistance

Abstract BRUSH Alloy 3 offers the highest electrical and thermal conductivity of any beryllium-copper alloy. It possesses an excellent combination of moderate strength, good corrosion resistance and good resistance to moderately elevated temperatures. Because of its unique physical and mechanical properties, Brush Alloy 3 finds widespread use in welding applications (RWMA Class 3), current-carrying springs, switch and instrument parts and similar components. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fatigue. It also includes information on corrosion resistance as well as casting, forming, heat treating, machining, joining, and surface treatment. Filing Code: Cu-454. Producer or source: Brush Wellman Inc..

ANSONIA C14500

Alloy Digest ◽  
2008 ◽  
Vol 57 (3) ◽  
Keyword(s):  
Mechanical Properties ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Pure Copper ◽  
Physical And Mechanical Properties ◽  
Heat Treating

Abstract Ansonia alloy C14500 has unique fabrication properties while maintaining both physical and mechanical properties close to pure copper. The addition of Tellurium makes the alloy free machining. This datasheet provides information on composition, physical properties, hardness, tensile properties, and shear strength. It also includes information on forming, heat treating, machining, and joining. Filing Code: CU-752. Producer or source: Ansonia Copper & Brass Inc.

Sign in / Sign up

Export Citation Format

Share Document