scholarly journals Unraveling the Guest-Induced Switchability in the Metal-Organic Framework DUT-13(Zn)

Author(s):  
Bodo Felsner ◽  
Volodymyr Bon ◽  
Jack D. Evans ◽  
Friedrich Schwotzer ◽  
Ronny Grünker ◽  
...  

A guest-induced flexibility in the framework DUT-13 was investigated in situ to analyze the breathing mechanism upon physisorption of nitrogen (77 K) and n-butane (273 K). The crystal structure of cp phase, solved from PXRD data using the computation-assisted semiempirical approach, shows two times smaller pore volume, compared to the op phase, which is consistent with the corresponding isotherms. The contraction mechanism is mainly based on the conformational isomerism of the benztb4- linker, which transforms from a staggered conformation in op phase to a more eclipsed in cp phase, leading to the contraction of the larger pore. A nearly complete op → cp → op transition was observed in the case of n-butane adsorption at 273 K, while in case of weakly interacting nitrogen molecules a portion of the sample remains in the op phase in the entire pressure range. Apparently, in case of DUT-13 the contraction is crystallite size-dependent, similarly as in a number of other switchable MOFs, which should be investigated more in detail in the future. Methane adsorption at varying temperatures showed a wide hysteresis at the temperatures between 111 K and 140 K. The hysteresis width decreases until it disappears completely at 170 K leading to a reversible isotherm, typical for rigid frameworks. The fact that breathing is observed in a broader temperature range in comparison to DUT‑49 demonstrates that thermodynamics and kinetics favour the DUT-13 contraction. Linker and hinges in DUT-13 are not stiff enough to support the metastable states required for NGA.

2021 ◽  
Author(s):  
Bodo Felsner ◽  
Volodymyr Bon ◽  
Jack D. Evans ◽  
Friedrich Schwotzer ◽  
Ronny Grünker ◽  
...  

A guest-induced flexibility in the framework DUT-13 was investigated in situ to analyze the breathing mechanism upon physisorption of nitrogen (77 K) and n-butane (273 K). The crystal structure of cp phase, solved from PXRD data using the computation-assisted semiempirical approach, shows two times smaller pore volume, compared to the op phase, which is consistent with the corresponding isotherms. The contraction mechanism is mainly based on the conformational isomerism of the benztb4- linker, which transforms from a staggered conformation in op phase to a more eclipsed in cp phase, leading to the contraction of the larger pore. A nearly complete op → cp → op transition was observed in the case of n-butane adsorption at 273 K, while in case of weakly interacting nitrogen molecules a portion of the sample remains in the op phase in the entire pressure range. Apparently, in case of DUT-13 the contraction is crystallite size-dependent, similarly as in a number of other switchable MOFs, which should be investigated more in detail in the future. Methane adsorption at varying temperatures showed a wide hysteresis at the temperatures between 111 K and 140 K. The hysteresis width decreases until it disappears completely at 170 K leading to a reversible isotherm, typical for rigid frameworks. The fact that breathing is observed in a broader temperature range in comparison to DUT‑49 demonstrates that thermodynamics and kinetics favour the DUT-13 contraction. Linker and hinges in DUT-13 are not stiff enough to support the metastable states required for NGA.


2021 ◽  
Author(s):  
Gregory M. Su ◽  
Han Wang ◽  
Brandon R. Barnett ◽  
Jeffrey R. Long ◽  
David Prendergast ◽  
...  

In situ near edge X-ray absorption fine structure spectroscopy directly probes unoccupied states associated with backbonding interactions between the open metal site in a metal–organic framework and various small molecule guests.


2021 ◽  
Vol 316 ◽  
pp. 110957
Author(s):  
Mian Zahid Hussain ◽  
Mounib Bahri ◽  
Werner R. Heinz ◽  
Quanli Jia ◽  
Ovidiu Ersen ◽  
...  

Langmuir ◽  
2013 ◽  
Vol 29 (27) ◽  
pp. 8657-8664 ◽  
Author(s):  
Wei-Jin Li ◽  
Shui-Ying Gao ◽  
Tian-Fu Liu ◽  
Li-Wei Han ◽  
Zu-Jin Lin ◽  
...  

Molecules ◽  
2021 ◽  
Vol 26 (15) ◽  
pp. 4449
Author(s):  
Lijian Sun ◽  
Limei Li ◽  
Xianhui An ◽  
Xueren Qian

The development of photothermal materials with a high light-to-heat conversion capability is essential for the utilization of clean solar energy. In this work, we demonstrate the use of a novel and sustainable concept involving cellulose liquefaction, rapid gelation, in situ synthesis and hot-press drying to convert cellulose and metal–organic framework (Prussian blue) into a stable photothermal bioplastic that can harvest sunlight and convert it into mechanical motion. As expected, the obtained Prussian blue@cellulose bioplastic (PCBP) can effectively absorb sunlight and the surface can be heated up to 70.3 °C under one sun irradiation (100 mW cm−2). As a demonstration of the practicality of PCBP, it was successfully used to drive a Stirling engine motion. Meanwhile, hot-pressing promotes the densification of the structure of PCBP and, therefore, improves the resistance to the penetration of water/non-aqueous liquids. Moreover, PCBP shows good mechanical properties and thermal stability. Given the excellent photothermal performance and environmentally friendly features of photothermal conversion bioplastic, we envisage this sustainable plastic film could play important roles toward diversified applications: a photothermal layer for thermoelectric generator, agricultural films for soil mulching and photothermal antibacterial activity, among others.


Sign in / Sign up

Export Citation Format

Share Document