scholarly journals Layer-by-Layer Assembly of Graphene Oxide Nanoplatelets Embedded Desalination Membranes with Improved Chlorine Resistance

2019 ◽  
Author(s):  
Mahsa Abbaszadeh ◽  
Daniel Krizak ◽  
Santanu Kundu
Keyword(s):  
Thin Film ◽  
Graphene Oxide ◽  
Water Flux ◽  
Surface Characteristics ◽  
Water Desalination ◽  
Layer By Layer ◽  
Water Contact ◽  
Salt Rejection ◽  
Dead End ◽  
Better Than

Membranes with polyamide thin film active layer are used in reverse osmosis based water desalination applications. Incorporation of graphene oxide nanoplatelets (GONPs) in the polyamide layer can alter the surface characteristics, permeability, selectivity, and can enhance the chlorine resistance of these membranes. In this study, a layer-by-layer (LbL) synthesis technique has been developed for embedding GONPs in polyamide layer. Polyamide layers with GONPs were synthesized in various sequences, such as alternating layers of GONPs and polyamide, and GONPs on top of the polyamide layer. Incorporation of GONPs resulted in an increase of surface hydrophilicity, as captured by the change of the water contact angle. Water flux and salt rejection properties of synthesized membranes have been investigated by using a dead-end cell. The salt rejection ability of membranes increased slightly with the incorporation of GONPs, while the water flux found to be similar to that observed for the pristine membranes without GONPs. Upon exposure to chlorine, GONPs embedded membranes retained salt rejection performance better than the pristine membranes. Our approach provides an alternative framework to incorporate nanoparticles in thin film membranes in a precise manner and to investigate the effect of such nanoparticles on the membrane performances.<br>

scholarly journals Layer-by-Layer Assembly of Graphene Oxide Nanoplatelets Embedded Desalination Membranes with Improved Chlorine Resistance

2019 ◽  
Author(s):  
Mahsa Abbaszadeh ◽  
Daniel Krizak ◽  
Santanu Kundu
Keyword(s):  
Thin Film ◽  
Graphene Oxide ◽  
Water Flux ◽  
Surface Characteristics ◽  
Water Desalination ◽  
Layer By Layer ◽  
Water Contact ◽  
Salt Rejection ◽  
Dead End ◽  
Better Than

Membranes with polyamide thin film active layer are used in reverse osmosis based water desalination applications. Incorporation of graphene oxide nanoplatelets (GONPs) in the polyamide layer can alter the surface characteristics, permeability, selectivity, and can enhance the chlorine resistance of these membranes. In this study, a layer-by-layer (LbL) synthesis technique has been developed for embedding GONPs in polyamide layer. Polyamide layers with GONPs were synthesized in various sequences, such as alternating layers of GONPs and polyamide, and GONPs on top of the polyamide layer. Incorporation of GONPs resulted in an increase of surface hydrophilicity, as captured by the change of the water contact angle. Water flux and salt rejection properties of synthesized membranes have been investigated by using a dead-end cell. The salt rejection ability of membranes increased slightly with the incorporation of GONPs, while the water flux found to be similar to that observed for the pristine membranes without GONPs. Upon exposure to chlorine, GONPs embedded membranes retained salt rejection performance better than the pristine membranes. Our approach provides an alternative framework to incorporate nanoparticles in thin film membranes in a precise manner and to investigate the effect of such nanoparticles on the membrane performances.<br>

scholarly journals Constructing Positively Charged Thin-Film Nanocomposite Nanofiltration Membranes with Enhanced Performance

Polymers ◽  
2020 ◽  
Vol 12 (11) ◽  
pp. 2526
Author(s):  
Wenyao Shao ◽  
Chenran Liu ◽  
Tong Yu ◽  
Ying Xiong ◽  
Zhuan Hong ◽  
...  
Keyword(s):  
Thin Film ◽  
Heavy Metal ◽  
Water Flux ◽  
Water Contact ◽  
Salt Rejection ◽  
Thin Film Composite ◽  
Charged Surfaces ◽  
Active Layers ◽  
Positively Charged ◽  
Thin Film Nanocomposite

Using polyethylenimine (PEI) as the aqueous reactive monomers, a positively charged thin-film nanocomposite (TFN) nanofiltration (NF) membrane with enhanced performance was developed by successfully incorporating graphene oxide (GO) into the active layer. The effects of GO concentrations on the surface roughness, water contact angle, water flux, salt rejection, heavy metal removals, antifouling property, and chlorine resistance of the TFN membranes were evaluated in depth. The addition of 20 ppm GO facilitated the formation of thin, smooth, and hydrophilic nanocomposite active layers. Thus, the TFN-PEI-GO-20 membrane showed the optimal water flux of 70.3 L·m−2·h−1 without a loss of salt rejection, which was 36.8% higher than the thin-film composite (TFC) blank membrane. More importantly, owing to the positively charged surfaces, both the TFC-PEI-blank and TFN-PEI-GO membranes exhibited excellent rejections toward various heavy metal ions including Zn2+, Cd2+, Cu2+, Ni2+, and Pb2+. Additionally, compared with the negatively charged polypiperazine amide NF membrane, both the TFC-PEI-blank and TFN-PEI-GO-20 membranes demonstrated superior antifouling performance toward the cationic surfactants and basic protein due to their hydrophilic, smooth, and positively charged surface. Moreover, the TFN-PEI-GO membranes presented the improved chlorine resistances with the increasing GO concentration.

IMPACTS OF HYDROPHILIC NANOFILLERS ON SEPARATION PERFORMANCE OF THIN FILM NANOCOMPOSITE REVERSE OSMOSIS MEMBRANE

2016 ◽  
Vol 78 (12) ◽  
Author(s):  
C. Y. Chong ◽  
G. S. Lai ◽  
W. J. Lau ◽  
N. Yusof ◽  
P. S. Goh ◽  
...  
Keyword(s):  
Thin Film ◽  
Water Permeability ◽  
Interfacial Polymerization ◽  
Pure Water ◽  
Water Flux ◽  
Water Desalination ◽  
Separation Performance ◽  
Salt Rejection ◽  
Tfc Membrane ◽  
Thin Film Nanocomposite

The membrane technology is still considered a costly method to produce potable water. In view of this, RO membrane with enhanced water permeability without trade-off in salt rejection is desirable as it could further reduce the cost for water desalination. In this study, thin film nanocomposite (TFN) membranes containing 0.05 or 0.10 w/v% hydrophilic nanofillers in polyamide layer were synthesized via interfacial polymerization of piperazine and trimesoyl chloride monomers. The resultant TFN membranes were characterized and compared with a control thin film composite (TFC) membrane. Results from the filtration experiments showed that TFN membranes exhibited higher water permeability, salt rejection and fouling resistance compared to that of the TFC membrane. Excessive amount of nanofillers incorporated in the membrane PA layer however negatively affected the cross-linking in the polymer matrix, thus deteriorating the membrane salt rejection. TFN membrane containing 0.05 w/v% of nanofillers showed better performances than the TFC membrane, recording a pure water flux of 11.2 L/m2∙h, and salt rejection of 95.4%, 97.3% and 97.5% against NaCl, Na2SO4 and MgSO4, respectively. 

scholarly journals Enhancing the performance of thin-film nanocomposite nanofiltration membranes using MAH-modified GO nanosheets

RSC Advances ◽  
2017 ◽  
Vol 7 (86) ◽  
pp. 54898-54910 ◽  
Author(s):  
Quanling Xie ◽  
Wenyao Shao ◽  
Shishen Zhang ◽  
Zhuan Hong ◽  
Qiuquan Wang ◽  
...  
Keyword(s):  
Thin Film ◽  
Graphene Oxide ◽  
Maleic Anhydride ◽  
Interfacial Polymerization ◽  
Water Flux ◽  
Functionalized Graphene ◽  
Nanofiltration Membranes ◽  
Functionalized Graphene Oxide ◽  
Salt Rejection ◽  
Thin Film Nanocomposite

In this work, novel thin-film nanocompostie NF membranes were developed through modification with maleic anhydride functionalized graphene oxideviainterfacial polymerization, which showed the enhanced water flux with retaining high salt rejection.

scholarly journals A Novel Thin-Film Nanocomposite Nanofiltration Membrane by Incorporating 3D Hyperbranched Polymer Functionalized 2D Graphene Oxide

Polymers ◽  
2018 ◽  
Vol 10 (11) ◽  
pp. 1253 ◽  
Author(s):  
Quanling Xie ◽  
Shishen Zhang ◽  
Hanjun Ma ◽  
Wenyao Shao ◽  
Xiao Gong ◽  
...  
Keyword(s):  
Thin Film ◽  
Graphene Oxide ◽  
Hyperbranched Polymer ◽  
High Performance ◽  
Interfacial Polymerization ◽  
Water Flux ◽  
Three Dimensional ◽  
Salt Rejection ◽  
Antifouling Ability ◽  
Thin Film Nanocomposite

In order to develop a high-performance thin-film nanocomposite (TFN) nanofiltration (NF) membrane, the functionalized graphene-based nanomaterial (GO-HBE-COOH) was synthesized by combining two-dimensional graphene oxide (GO) with a three-dimensional hyperbranched polymer, which was used as the novel nanofiller and successfully embedded into the polypiperazine-amide (PPA) active layers on polysulfone (PSU) substrates via interfacial polymerization (IP) process. The resultant NF membranes were characterized using ATR-FTIR, SEM, and AFM, while their performance was evaluated in terms of water flux, salt rejection, antifouling ability, and chlorine resistance. The influence of GO-HBE-COOH concentration on the morphologies, properties, and performance of TFN NF membranes was investigated. With the addition of 60 ppm GO-HBE-COOH, the TFN-GHC-60 NF membrane exhibited the optimal water flux without a sacrifice of the salt rejection. It was found that the introduction of GO-HBE-COOH nanosheets favored the formation of a thinner and smoother nanocomposite active layer with an enhanced hydrophilicity and negative charge. As a result, TFN NF membranes demonstrated a superior permeaselectivity, antifouling ability, and chlorine resistance over the conventional PPA thin-film composite (TFC) membranes.

Fabrication of layer-by-layer graphene oxide thin film on copper substrate by electrophoretic deposition

2020 ◽  
Vol 59 (12) ◽  
pp. 125001
Author(s):  
Nan Ye ◽  
Satoka Ohnishi ◽  
Mitsuhiro Okada ◽  
Kazuto Hatakeyama ◽  
Kazuhiko Seki ◽  
...  
Keyword(s):  
Thin Film ◽  
Graphene Oxide ◽  
Electrophoretic Deposition ◽  
Copper Substrate ◽  
Oxide Thin Film ◽  
Layer By Layer ◽  
Layer Graphene

scholarly journals Engineering the Surface and Mechanical Properties of Water Desalination Membranes Using Ultralong Carbon Nanotubes

Membranes ◽  
2018 ◽  
Vol 8 (4) ◽  
pp. 106 ◽  
Author(s):  
Yehia M. Manawi ◽  
Kui Wang ◽  
Viktor Kochkodan ◽  
Daniel J. Johnson ◽  
Muataz A. Atieh ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Carbon Nanotubes ◽  
Aspect Ratio ◽  
Water Flux ◽  
Contact Angles ◽  
Water Desalination ◽  
Membrane Properties ◽  
Porous Membranes ◽  
Water Contact ◽  
And Performance

In this work, novel polysulphone (PS) porous membranes for water desalination, incorporated with commercial and produced carbon nanotubes (CNT), were fabricated and analyzed. It was demonstrated that changing the main characteristics of CNT (e.g., loading in the dope solutions, aspect ratio, and functionality) significantly affected the membrane properties and performance including porosity, water flux, and mechanical and surface properties. The water flux of the fabricated membranes increased considerably (up to 20 times) along with the increase in CNT loading. Conversely, yield stress and Young’s modulus of the membranes dropped with the increase in the CNT loading mainly due to porosity increase. It was shown that the elongation at fracture for PS/0.25 wt. % CNT membrane was much higher than for pristine PS membrane due to enhanced compatibility of commercial CNTs with PS matrix. More pronounced effect on membrane’s mechanical properties was observed due to compatibility of CNTs with PS matrix when compared to other factors (i.e., changes in the CNT aspect ratio). The water contact angle for PS membranes incorporated with commercial CNT sharply decreased from 73° to 53° (membrane hydrophilization) for membranes with 0.1 and 1.0 wt. % of CNTs, while for the same loading of produced CNTs the water contact angles for the membrane samples increased from 66° to 72°. The obtained results show that complex interplay of various factors such as: loading of CNT in the dope solutions, aspect ratio, and functionality of CNT. These features can be used to engineer membranes with desired properties and performance.

scholarly journals Removal of natural organic matter for wetland saline water desalination by coagulation-pervaporation

2019 ◽  
Vol 22 (3) ◽  
pp. 85-92 ◽  
Author(s):  
Aulia Rahma ◽  
Muthia Elma ◽  
Mahmud Mahmud ◽  
Chairul Irawan ◽  
Amalia Enggar Pratiwi ◽  
...  
Keyword(s):  
Organic Matter ◽  
Natural Organic Matter ◽  
Room Temperature ◽  
Sea Water ◽  
Saline Water ◽  
Water Flux ◽  
Water Desalination ◽  
Salt Rejection ◽  
Coagulation Process ◽  
Other Hand

The high number of natural organic matter contain in wetland water may cause its water has brown color and not consumable. In other hand, intrusion of sea water through wetland aquifer create water become saline, notably on hot season. Coagulation is effective method to applied for removing of natural organic matter. However, it could not be used for salinity removal. Hence combination of coagulation and pervaporation process is attractive method to removing both of natural organic matter and conductivity of wetland saline water. The objective of this works is to investigate optimum coagulant doses for removing organic matter by coagulation process as pretreatment and to analysis performance of coagulation-pervaporation silica-pectin membrane for removing of organic matter and conductivity of wetland saline water. Coagulation process in this work carried out under varied aluminum sulfate dose 10-60 mg.L-1. Silica-pectin membrane was used for pervaporation process at feed temperature ~25 °C (room temperature). Optimum condition of pretreatment coagulation set as alum dose at 30 mg.L-1 with maximum removal efficiency 81,8 % (UV254) and 40 % (conductivity). In other hand, combining of coagulation-pervaporation silica-pectin membrane shows both of UV254 and salt rejection extremely good instead without pretreatment coagulation of 86,8 % and 99,9 % for UV254 and salt rejection respectively. Moreover, water flux of silica-pectin membrane pervaporation with coagulation pretreatment shown higher 17,7 % over water flux of wetland saline water without pretreatment coagulation. Combining of coagulation and pervaporation silica-pectin membrane is effective to removing both of organic matter and salinity of wetland saline water at room temperature.

Sign in / Sign up

Export Citation Format

Share Document