scholarly journals Matched Filtering in Massive MU-MIMO Systems

2021 ◽  
Author(s):  
◽  
Shuang Li

<p>This thesis considers the analysis of matched filtering (MF) processing in massive multi-user multiple-input-multiple-output (MU-MIMO) wireless communication systems. The main focus is the analysis of system performance for combinations of two linear processers, analog maximum ratio combining (MRC) and digital MRC. We consider implementations of these processing techniques both at a single base-station (BS) and in distributed BS layouts. We further consider extremely low complexity distributed variants of MRC for such systems. Since MRC relies on the massive MIMO properties of favourable propagation (FP) and channel hardening, we also present a detailed analysis of FP and channel hardening. This analysis employs modern ray-based models rather than classical channel models as the models are more reliable for the large arrays and higher frequencies envisaged for future systems.  The importance of MRC processing is being driven by the emergence of massive MIMO and millimetre wave as strong candidates for next generation wireless communication systems. Massive MIMO explores the spatial dimension by providing significant increases in data rate, link reliability and energy efficiency. However, with a large number of antennas co-located in a fixed physical space, correlation between the elements of antennas may have a negative impact. Distributed systems, where the total number of antennas are divided into different locations, make this problem less serious. Also, linear processing techniques, analog MRC and digital MRC, due to their simplicity and efficiency, are more practical in massive MU-MIMO systems. For these reasons we consider MRC processing in both co-located and distributed scenarios.  Although distributed systems reduce the adverse impact of correlation caused by closely-spaced large antenna arrays by dividing the antennas into multiple antenna clusters, the correlation within the cluster still exists. Thus, we extend MRC analysis for massive MIMO to correlated channels. Approximations of expected per-user spectrum efficiency (SE) with correlation effects for massive MIMO systems with analog MRC and digital MRC are derived. Useful insights are given for future system deployments. A convergence analysis of the interference behaviour under different correlation models is presented.  Furthermore, a distributed fully cooperative system, where all the received signals are sent to the central processor, offers attractive performance gains but at the cost of high computational complexity at the central node. Thus, we propose four low-complexity, two-stage processors, where only processed signals after local processing (first-stage) are transmitted to the global processing node (second-stage). We present analytical expressions for the expected per user SINR in an uplink distributed MU-MIMO system with two-stage beam-forming. This leads to an approximation of expected per-user SE.  The analysis of both millimetre wave and massive MIMO systems requires a strong link to the physical environment and ray-based models are more practical and suitable for such systems. However, it is unclear how the key properties in conventional MIMO systems, such as FP and channel hardening, will behave in a ray-based channel model. In this thesis, remarkably simple and general results are obtained demonstrating that: a) channel hardening may or may nor occur depending on the nature of the channel models; b) FP is guaranteed for all models as long as the ray angles are continuous random variables; c) we also propose a novel system metric, denoted large system potential (LSP) as the ratio of the mean desired signal power to the total mean interference power, where both the numbers of antennas and end-users are growing to infinity at a fixed ratio. We derive simple approximations to LSP and demonstrate that LSP will not normally hold as the mean interference power usually grows logarithmically relative to the mean signal power.</p>

2021 ◽  
Author(s):  
◽  
Shuang Li

<p>This thesis considers the analysis of matched filtering (MF) processing in massive multi-user multiple-input-multiple-output (MU-MIMO) wireless communication systems. The main focus is the analysis of system performance for combinations of two linear processers, analog maximum ratio combining (MRC) and digital MRC. We consider implementations of these processing techniques both at a single base-station (BS) and in distributed BS layouts. We further consider extremely low complexity distributed variants of MRC for such systems. Since MRC relies on the massive MIMO properties of favourable propagation (FP) and channel hardening, we also present a detailed analysis of FP and channel hardening. This analysis employs modern ray-based models rather than classical channel models as the models are more reliable for the large arrays and higher frequencies envisaged for future systems.  The importance of MRC processing is being driven by the emergence of massive MIMO and millimetre wave as strong candidates for next generation wireless communication systems. Massive MIMO explores the spatial dimension by providing significant increases in data rate, link reliability and energy efficiency. However, with a large number of antennas co-located in a fixed physical space, correlation between the elements of antennas may have a negative impact. Distributed systems, where the total number of antennas are divided into different locations, make this problem less serious. Also, linear processing techniques, analog MRC and digital MRC, due to their simplicity and efficiency, are more practical in massive MU-MIMO systems. For these reasons we consider MRC processing in both co-located and distributed scenarios.  Although distributed systems reduce the adverse impact of correlation caused by closely-spaced large antenna arrays by dividing the antennas into multiple antenna clusters, the correlation within the cluster still exists. Thus, we extend MRC analysis for massive MIMO to correlated channels. Approximations of expected per-user spectrum efficiency (SE) with correlation effects for massive MIMO systems with analog MRC and digital MRC are derived. Useful insights are given for future system deployments. A convergence analysis of the interference behaviour under different correlation models is presented.  Furthermore, a distributed fully cooperative system, where all the received signals are sent to the central processor, offers attractive performance gains but at the cost of high computational complexity at the central node. Thus, we propose four low-complexity, two-stage processors, where only processed signals after local processing (first-stage) are transmitted to the global processing node (second-stage). We present analytical expressions for the expected per user SINR in an uplink distributed MU-MIMO system with two-stage beam-forming. This leads to an approximation of expected per-user SE.  The analysis of both millimetre wave and massive MIMO systems requires a strong link to the physical environment and ray-based models are more practical and suitable for such systems. However, it is unclear how the key properties in conventional MIMO systems, such as FP and channel hardening, will behave in a ray-based channel model. In this thesis, remarkably simple and general results are obtained demonstrating that: a) channel hardening may or may nor occur depending on the nature of the channel models; b) FP is guaranteed for all models as long as the ray angles are continuous random variables; c) we also propose a novel system metric, denoted large system potential (LSP) as the ratio of the mean desired signal power to the total mean interference power, where both the numbers of antennas and end-users are growing to infinity at a fixed ratio. We derive simple approximations to LSP and demonstrate that LSP will not normally hold as the mean interference power usually grows logarithmically relative to the mean signal power.</p>


Author(s):  
М.Г. БАКУЛИН ◽  
Т.Б.К. БЕН РАЖЕБ ◽  
В.Б. КРЕЙНДЕЛИН ◽  
А.Э. СМИРНОВ

С развитием технологии MIMO и появлением технологии massive MIMO возросла сложность обработки сигнала на приемной стороне. Применение известных алгоритмов детектирования сигнала на приемной стороне становится трудно реализуемым из-за высокой вычислительной сложности. Предлагается новая реализация известного алгоритма МСКО, которая позволяет снизить вычислительную сложность детектирования без потерь в помехоустойчивости в системах беспроводной связи, использующих технологию massive MIMO. With the development of MIMO technology and the appearance of the massive MIMO technology, the computational complexity of signal processing on the receiving side has increased. The application of known signal detection algorithms used in MIMO systems becomes difficult or even impossible to implement in massive MIMO systems because of computational complexity. We offer a new realization technique of the well-known MMSE detection algorithm with less computational complexity and without any loss in noise immunity in wireless communication systems using massive MIMO technology.


Electronics ◽  
2020 ◽  
Vol 9 (5) ◽  
pp. 795
Author(s):  
Xiaoxuan Xia ◽  
Wence Zhang ◽  
Yinkai Fu ◽  
Xu Bao ◽  
Jing Xia

To compromise between the system performance and hardware cost, millimeter wave (mmWave) massive multiple-input multiple-output (MIMO) systems have been regarded as an enabling technology for the fifth generation of mobile communication systems (5G). This paper considers a low-complexity angular-domain compressing based detection (ACD) for uplink multi-user mmWave massive MIMO systems, which involves hybrid analog and digital processing. In analog processing, we perform angular-domain compression on the received signal by exploiting the sparsity of the mmWave channel to reduce the dimension of the signal space. In digital processing, the proposed ACD scheme works well with zero forcing (ZF)/maximum ratio combining (MRC)/minimum mean square error (MMSE) detection schemes. The performance analysis of the proposed ACD scheme is provided in terms of achievable rates, energy efficiency and computational complexity. Simulations are carried out and it shows that compared with existing works, the proposed ACD scheme not only reduces the computational complexity by more than 50 % , but also improves the system’s achievable rates and energy efficiency.


2017 ◽  
Vol 2017 ◽  
pp. 1-13 ◽  
Author(s):  
R. Magueta ◽  
V. Mendes ◽  
D. Castanheira ◽  
A. Silva ◽  
R. Dinis ◽  
...  

Millimeter waves and massive MIMO are a promising combination to achieve the multi-Gb/s required by future 5G wireless systems. However, fully digital architectures are not feasible due to hardware limitations, which means that there is a need to design signal processing techniques for hybrid analog-digital architectures. In this manuscript, we propose a hybrid iterative block multiuser equalizer for subconnected millimeter wave massive MIMO systems. The low complexity user-terminals employ pure-analog random precoders, each with a single RF chain. For the base station, a subconnected hybrid analog-digital equalizer is designed to remove multiuser interference. The hybrid equalizer is optimized using the average bit-error-rate as a metric. Due to the coupling between the RF chains in the optimization problem, the computation of the optimal solutions is too complex. To address this problem, we compute the analog part of the equalizer sequentially over the RF chains using a dictionary built from the array response vectors. The proposed subconnected hybrid iterative multiuser equalizer is compared with a recently proposed fully connected approach. The results show that the performance of the proposed scheme is close to the fully connected hybrid approach counterpart after just a few iterations.


Sensors ◽  
2021 ◽  
Vol 21 (18) ◽  
pp. 6054
Author(s):  
João Pedro Pavia ◽  
Vasco Velez ◽  
Renato Ferreira ◽  
Nuno Souto ◽  
Marco Ribeiro ◽  
...  

Millimeter-wave and terahertz technologies have been attracting attention from the wireless research community since they can offer large underutilized bandwidths which can enable the support of ultra-high-speed connections in future wireless communication systems. While the high signal attenuation occurring at these frequencies requires the adoption of very large (or the so-called ultra-massive) antenna arrays, in order to accomplish low complexity and low power consumption, hybrid analog/digital designs must be adopted. In this paper we present a hybrid design algorithm suitable for both mmWave and THz multiuser multiple-input multiple-output (MIMO) systems, which comprises separate computation steps for the digital precoder, analog precoder and multiuser interference mitigation. The design can also incorporate different analog architectures such as phase shifters, switches and inverters, antenna selection and so on. Furthermore, it is also applicable for different structures, namely fully-connected structures, arrays of subarrays (AoSA) and dynamic arrays of subarrays (DAoSA), making it suitable for the support of ultra-massive MIMO (UM-MIMO) in severely hardware constrained THz systems. We will show that, by using the proposed approach, it is possible to achieve good trade-offs between spectral efficiency and simplified implementation, even as the number of users and data streams increases.


Author(s):  
Omar Ali Abu-Ella ◽  
Mohammed Salem Elmusrati

In this chapter we discuss the general techniques of multi-antenna systems. Then, we delve to describe four recent trends in interference mitigation technologies that will change the design of the future 4G and beyond (5G) of mobile and wireless communication systems. Particularly, we consider the coordinated multi-point MIMO systems, smart terminal devices techniques, millimeter-wave communications and massive MIMO systems. We discuss the fundamental concepts of those new approaches, along with their advantages, and the challenges facing such technologies. Even though the references list of this chapter is not anticipated to be exhaustive, the cited articles and also the references therein should be good sources of further reading to start with.


Author(s):  
Xiao Chen ◽  
Zaichen Zhang ◽  
Liang Wu ◽  
Jian Dang

Abstract In this journal, we investigate the beam-domain channel estimation and power allocation in hybrid architecture massive multiple-input and multiple-output (MIMO) communication systems. First, we propose a low-complexity channel estimation method, which utilizes the beam steering vectors achieved from the direction-of-arrival (DOA) estimation and beam gains estimated by low-overhead pilots. Based on the estimated beam information, a purely analog precoding strategy is also designed. Then, the optimal power allocation among multiple beams is derived to maximize spectral efficiency. Finally, simulation results show that the proposed schemes can achieve high channel estimation accuracy and spectral efficiency.


Sign in / Sign up

Export Citation Format

Share Document