Integration of stages of preparation of production of high-precision small parts on CNC machines

2021 ◽  
pp. 17-23
Author(s):  
Yu. I. Karlina
Keyword(s):  
High Precision ◽  
Cnc Machines ◽  
Small Parts

scholarly journals Automation of preproduction processes for high-precision small-sized parts on CNC machines

2021 ◽  
Vol 1064 (1) ◽  
pp. 012017
Author(s):  
Yu I Karlina ◽  
S K Kargapoltsev ◽  
V E Gozbenko ◽  
D S Leonovich ◽  
A I Karlina
Keyword(s):  
High Precision ◽  
Cnc Machines

Automatic measurement of SAED patterns from asbestos minerals

1988 ◽  
Vol 46 ◽  
pp. 846-847
Author(s):  
J. C. Russ ◽  
T. Taguchi ◽  
P. M. Peters ◽  
E. Chatfield ◽  
J. C. Russ ◽  
...  
Keyword(s):  
Diffraction Pattern ◽  
High Precision ◽  
Diffraction Data ◽  
Automatic Measurement ◽  
Automatic Method ◽  
Important Method ◽  
X Ray ◽  
Integrated Intensity ◽  
Asbestiform Minerals ◽  
True Center

Conventional SAD patterns as obtained in the TEM present difficulties for identification of materials such as asbestiform minerals, although diffraction data is considered to be an important method for making this purpose. The preferred orientation of the fibers and the spotty patterns that are obtained do not readily lend themselves to measurement of the integrated intensity values for each d-spacing, and even the d-spacings may be hard to determine precisely because the true center location for the broken rings requires estimation. We have implemented an automatic method for diffraction pattern measurement to overcome these problems. It automatically locates the center of patterns with high precision, measures the radius of each ring of spots in the pattern, and integrates the density of spots in that ring. The resulting spectrum of intensity vs. radius is then used just as a conventional X-ray diffractometer scan would be, to locate peaks and produce a list of d,I values suitable for search/match comparison to known or expected phases.

On effects of non-systematic reflections on weak-beam images of partial dislocations

1991 ◽  
Vol 49 ◽  
pp. 688-689
Author(s):  
K. Z. Botros ◽  
S. S. Sheinin
Keyword(s):  
High Precision ◽  
Stacking Fault ◽  
Important Application ◽  
Stacking Fault Energy ◽  
Sharp Peak ◽  
Weak Beam ◽  
Partial Dislocations ◽  
Deviation Parameter ◽  
Beam Diffraction

The main features of weak beam images of dislocations were first described by Cockayne et al. using calculations of intensity profiles based on the kinematical and two beam dynamical theories. The feature of weak beam images which is of particular interest in this investigation is that intensity profiles exhibit a sharp peak located at a position very close to the position of the dislocation in the crystal. This property of weak beam images of dislocations has an important application in the determination of stacking fault energy of crystals. This can easily be done since the separation of the partial dislocations bounding a stacking fault ribbon can be measured with high precision, assuming of course that the weak beam relationship between the positions of the image and the dislocation is valid. In order to carry out measurements such as these in practice the specimen must be tilted to "good" weak beam diffraction conditions, which implies utilizing high values of the deviation parameter Sg.

Digital differential hysteresis iimage processing displays what the microscope acquires but the eye can't see

1995 ◽  
Vol 53 ◽  
pp. 642-643
Author(s):  
Klaus-Ruediger Peters
Keyword(s):  
Image Processing ◽  
Visual System ◽  
High Precision ◽  
Image Data ◽  
Processing Technology ◽  
Output Data ◽  
Contrast Resolution ◽  
Pixel Intensity ◽  
Data Reading ◽  
Hysteresis Properties

Differential hysteresis processing is a new image processing technology that provides a tool for the display of image data information at any level of differential contrast resolution. This includes the maximum contrast resolution of the acquisition system which may be 1,000-times higher than that of the visual system (16 bit versus 6 bit). All microscopes acquire high precision contrasts at a level of <0.01-25% of the acquisition range in 16-bit - 8-bit data, but these contrasts are mostly invisible or only partially visible even in conventionally enhanced images. The processing principle of the differential hysteresis tool is based on hysteresis properties of intensity variations within an image.Differential hysteresis image processing moves a cursor of selected intensity range (hysteresis range) along lines through the image data reading each successive pixel intensity. The midpoint of the cursor provides the output data. If the intensity value of the following pixel falls outside of the actual cursor endpoint values, then the cursor follows the data either with its top or with its bottom, but if the pixels' intensity value falls within the cursor range, then the cursor maintains its intensity value.

High resolution and high precision beta-spectrometry

Physica ◽  
1952 ◽  
Vol 18 (2) ◽  
pp. 1063-1065 ◽  
Author(s):  
R SIDAY
Keyword(s):  
High Resolution ◽  
High Precision ◽  
Beta Spectrometry

High precision measurement of the SOS surface thickness in the rough phase

1991 ◽  
Vol 1 (12) ◽  
pp. 1669-1673 ◽  
Author(s):  
Hans Gerd Evertz ◽  
Martin Hasenbusch ◽  
Mihail Marcu ◽  
Klaus Pinn ◽  
Sorin Solomon
Keyword(s):  
High Precision ◽  
Precision Measurement ◽  
High Precision Measurement ◽  
Surface Thickness

State special primary acceleration measurement standard for gravimetry GET 190-2019

2020 ◽  
pp. 3-8
Author(s):  
L.F. Vitushkin ◽  
F.F. Karpeshin ◽  
E.P. Krivtsov ◽  
P.P. Krolitsky ◽  
V.V. Nalivaev ◽  
...  
Keyword(s):  
High Precision ◽  
Free Fall ◽  
Measurement Range ◽  
Measurement Standard ◽  
Acceleration Measurement ◽  
Measurement Systems ◽  
Free Fall Acceleration ◽  
Investigation Methods ◽  
Measurement Results ◽  
Upper Level

The State special primary acceleration measurement standard for gravimetry (GET 190-2019), its composition, principle of operation and basic metrological characteristics are presented. This standard is on the upper level of reference for free-fall acceleration measurements. Its accuracy and reliability were improved as a result of optimisation of the adjustment procedures for measurement systems and its integration within the upgraded systems, units and modern hardware components. A special attention was given to adjusting the corrections applied to measurement results with respect to procedural, physical and technical limitations. The used investigation methods made it possibled to confirm the measurement range of GET 190-2019 and to determine the contributions of main sources of errors and the total value of these errors. The measurement characteristics and GET 90-2019 were confirmed by the results obtained from measurements of the absolute value of the free fall acceleration at the gravimetrical site “Lomonosov-1” and by their collation with the data of different dates obtained from measurements by high-precision foreign and domestic gravimeters. Topicality of such measurements ensues from the requirements to handle the applied problems that need data on parameters of the Earth gravitational field, to be adequately faced. Geophysics and navigation are the main fields of application for high-precision measurements in this field.

Prospects of development of the reference base of the Russian Federation in the field of length measurements

2020 ◽  
pp. 3-5
Author(s):  
Y. G. Zakharenko ◽  
N. A. Kononova ◽  
V. L. Fedorin ◽  
Z. V. Fomkina ◽  
K. V. Chekirda
Keyword(s):  
High Precision ◽  
Russian Federation ◽  
Reference Base ◽  
Length Measurements ◽  
Laser Sources ◽  
The Russian Federation ◽  
Unit Of Length ◽  
Further Development ◽  
532 Nm

The results of the work to create a complex of high-precision hardware for the unit of length reproduction and transferring carried out at “D. I. Mendeleyev Institute for Metrology (VNIIM)” are represented. This complex will serve as the basis for the further development of the reference base of the Russian Federation in the field of length measurements and will allow reproduction of the unit of length at two wavelengths of 633 nm and 532 nm, as well as measurements of the wavelength of laser sources in vacuum in the range from 500 to 1050 nm.

Sign in / Sign up

Export Citation Format

Share Document