Application of the method of mathematical modeling for forecasting channel deformations at the underwater crossing of the main pipeline

2020 ◽  
Vol 10 (6) ◽  
pp. 599-609
Author(s):  
Valery А. Gruzdev ◽  
◽  
Georgy V. Mosolov ◽  
Ekaterina A. Sabayda ◽  
◽  
...  
Keyword(s):  
Mathematical Modeling ◽  
Mathematical Model ◽  
Roughness Coefficient ◽  
Computational Domain ◽  
Channel Deformations ◽  
Geological Surveys ◽  
Kuban River ◽  
The Stability ◽  
Protective Structures

In order to determine the possibility of using the method of mathematical modeling for making long-term forecasts of channel deformations of trunk line underwater crossing (TLUC) through water obstacles, a methodology for performing and analyzing the results of mathematical modeling of channel deformations in the TLUC zone across the Kuban River is considered. Within the framework of the work, the following tasks were solved: 1) the format and composition of the initial data necessary for mathematical modeling were determined; 2) the procedure for assigning the boundaries of the computational domain of the model was considered, the computational domain was broken down into the computational grid, the zoning of the computational domain was performed by the value of the roughness coefficient; 3) the analysis of the results of modeling the water flow was carried out without taking the bottom deformations into account, as well as modeling the bottom deformations, the specifics of the verification and calibration calculations were determined to build a reliable mathematical model; 4) considered the possibility of using the method of mathematical modeling to check the stability of the bottom in the area of TLUC in the presence of man-made dumping or protective structure. It has been established that modeling the flow hydraulics and structure of currents, making short-term forecasts of local high-altitude reshaping of the bottom, determining the tendencies of erosion and accumulation of sediments upstream and downstream of protective structures are applicable for predicting channel deformations in the zone of the TLUC. In all these cases, it is mandatory to have materials from engineering-hydro-meteorological and engineering-geological surveys in an amount sufficient to compile a reliable mathematical model.

Mathematical modeling of fluid movement inside the eyeball during intravitreal injection

2021 ◽  
pp. 106-109
Author(s):  
D.V. Lipatov ◽  
◽  
S.A. Skladchikov ◽  
N.P. Savenkova ◽  
V.V. Novoderezkin ◽  
...  
Keyword(s):  
Mathematical Modeling ◽  
Mathematical Model ◽  
Residence Time ◽  
Complex Structure ◽  
Posterior Vitreous Detachment ◽  
Vitreous Body ◽  
Complete Removal ◽  
Intravitreal Injections ◽  
The World

Background. The avalanche-like growth of intravitreal injections in the world has significantly increased interest in the hemodynamics of the processes that occur in the eye when a drug is injected into the vitreous cavity. Every year, the number of intravitreally used drugs and promising areas in which they can be used is growing. This also applies to the creation of new combined medicines and the development of drugs with a long-term therapeutic effect. Aims. Create mathematical model of eyeball to evaluate the movement of the drug substance in it; to estimate the time of the drug's presence in the eye cavity before its complete removal, to characterize the ways of its removal from the eye cavity; to assess the significance of posterior vitreous detachment during the time when the drug is present in the eye cavity; to evaluate the effect on the hydrodynamics of the depth of drug administration. Results. When the drug is administered closer to the center of the eyeball, its residence time increases in comparison with the parietal administration. With a complete posterior detachment of the vitreous body, the time of finding the drug in the eye is prolonged compared to its absence. The obtained results of mathematical modeling of the movement of the drug administered intravitreally cannot be mechanically transferred to the human eye, due to the more complex structure of the latter. Key words: intravitreal injections, vitreous body, mathematic computing.

LONG-TERM STABILITY ANALYSIS OF ACOUSTIC ABSORBING BOUNDARY CONDITIONS

2013 ◽  
Vol 23 (11) ◽  
pp. 2129-2154 ◽  
Author(s):  
HÉLÈNE BARUCQ ◽  
JULIEN DIAZ ◽  
VÉRONIQUE DUPRAT
Keyword(s):  
Stability Analysis ◽  
Boundary Conditions ◽  
Absorbing Boundary Conditions ◽  
Computational Domain ◽  
Acoustic Wave Equation ◽  
Absorbing Boundary ◽  
Term Stability ◽  
Long Term Stability ◽  
The Stability

This work deals with the stability analysis of a one-parameter family of Absorbing Boundary Conditions (ABC) that have been derived for the acoustic wave equation. We tackle the problem of long-term stability of the wave field both at the continuous and the numerical levels. We first define a function of energy and show that it is decreasing in time. Its discrete form is also decreasing under a Courant–Friedrichs–Lewy (CFL) condition that does not depend on the ABC. Moreover, the decay rate of the continuous energy can be determined: it is exponential if the computational domain is star-shaped and this property can be illustrated numerically.

scholarly journals Stabiizing The Steady State Solution of Lasser Fever: Problems and Prospect

2022 ◽  
Vol 05 (01) ◽  
Author(s):  
Innocent C. Eli ◽  
Keyword(s):  
Mathematical Modeling ◽  
Mathematical Model ◽  
Control Parameter ◽  
Steady State Solution ◽  
Lassa Fever ◽  
Sexual Contact ◽  
Opposite Sex ◽  
The Stability ◽  
And Control ◽  
Disease Free

The study of mathematical modeling of the stability analysis of Lassa fever was examined. A mathematical model for the spread and control of Lassa fever was formulated and analyzed. The model incorporates a control parameter, the use of condom to control human to human transmission through sexual contact with opposite sex. The disease free and endemic equilibrium states were analyzed.

The methodological approach to the evaluation of the stability of the digital data in the information systems

2021 ◽  
Author(s):  
A.V. Solovyev
Keyword(s):  
Mathematical Model ◽  
Information Systems ◽  
Methodological Approach ◽  
Digital Data ◽  
Long Term Storage ◽  
Destabilizing Factors ◽  
Software And Hardware ◽  
The Stability ◽  
Term Storage

When developing information systems aimed at long-term storage of digital data, it is necessary to think over solutions that allow not only to ensure storage security, storage reliability, but also to ensure the safety of digital data in the event of a possible destabilizing effect, including a catastrophic one. That is, there is a need to ensure the stability of digital data under natural, man-made, anthropogenic or other stored influences. The first step towards digital data resilience is to assess data resilience. The aim of the work is to develop a methodological apparatus for assessing the stability of digital data in information systems operating in conditions of disasters and destabilizing factors. The article presents a methodological approach to assessing the stability of digital data, including long-term storage. The stability of digital data to destabilizing influences in the article is understood as the ability to recover in a minimum period of time both the data itself and the operability of applications responsible for the interpretation of this data, as well as the operability of other software and hardware, without which the use of digital data is not possible. The author of the article proposes a methodology for creating a mathematical model for assessing sustainability, presents a model for assessing the sustainability indicator in general. The main steps for the development of a mathematical model of stability are described. Areas of further research on the development of methodological and algorithmic apparatus for modeling the stability of digital data have been identified. The methodological approach proposed in the article can be used to solve the problems of stability of digital data of a fairly wide class of applied information systems operating in conditions of disasters and destabilizing factors. The proposed approach presupposes redundancy of software and hardware of information systems, additional time spent in the design for compiling models, additional costs for storing the "history" of the functioning of information systems, description of destabilizing factors, etc. However, according to the author of the article, this is necessary and justified to ensure the safety of valuable digital data with a long storage period.

scholarly journals Modeling and Simulating Asymmetrical Conductance Changes in Gramicidin Pores

2014 ◽  
Vol 2 (1) ◽  
Author(s):  
Shixin Xu ◽  
Minxin Chen ◽  
Sheereen Majd ◽  
Xingye Yue ◽  
Chun Liu
Keyword(s):  
Mathematical Model ◽  
Lipid Membranes ◽  
Membrane Surface ◽  
Gramicidin A ◽  
Enzymatic Reactions ◽  
Computational Domain ◽  
Two Dimensional ◽  
Fem Method ◽  
Conductance Changes ◽  
The Stability

Abstract Gramicidin A is a small and well characterized peptide that forms an ion channel in lipid membranes. An important feature of gramicidin A (gA) pore is that its conductance is affected by the electric charges near the its entrance. This property has led to the application of gramicidin A as a biochemical sensor for monitoring and quantifying a number of chemical and enzymatic reactions. Here, a mathematical model of conductance changes of gramicidin A pores in response to the presence of electrical charges near its entrance, either on membrane surface or attached to gramicidin A itself, is presented. In this numerical simulation, a two dimensional computational domain is set to mimic the structure of a gramicidin A channel in the bilayer surrounded by electrolyte. The transport of ions through the channel is modeled by the Poisson-Nernst-Planck (PNP) equations that are solved by Finite Element Method (FEM). Preliminary numerical simulations of this mathematical model are in qualitative agreement with the experimental results in the literature. In addition to the model and simulations, we also present the analysis of the stability of the solution to the boundary conditions and the convergence of FEM method for the two dimensional PNP equations in our model.

The Stability of the WHO Reference Thromboplastin NIBS & C 67/40

1979 ◽  
Vol 42 (04) ◽  
pp. 1135-1140 ◽  
Author(s):  
G I C Ingram
Keyword(s):  
Human Brain ◽  
Collaborative Study ◽  
Calibration Constant ◽  
Long Term Stability ◽  
Freeze Dried ◽  
Show Evidence ◽  
Human Material ◽  
Reference Preparation ◽  
The Stability

SummaryThe International Reference Preparation of human brain thromboplastin coded 67/40 has been thought to show evidence of instability. The evidence is discussed and is not thought to be strong; but it is suggested that it would be wise to replace 67/40 with a new preparation of human brain, both for this reason and because 67/40 is in a form (like Thrombotest) in which few workers seem to use human brain. A �plain� preparation would be more appropriate; and a freeze-dried sample of BCT is recommended as the successor preparation. The opportunity should be taken also to replace the corresponding ox and rabbit preparations. In the collaborative study which would be required it would then be desirable to test in parallel the three old and the three new preparations. The relative sensitivities of the old preparations could be compared with those found in earlier studies to obtain further evidence on the stability of 67/40; if stability were confirmed, the new preparations should be calibrated against it, but if not, the new human material should receive a calibration constant of 1.0 and the new ox and rabbit materials calibrated against that.The types of evidence available for monitoring the long-term stability of a thromboplastin are discussed.

TO THE STABILITY OF TANK VEHICLES IN THE BRAKE MODE

2019 ◽  
pp. 27-32
Author(s):  
Denys Popelysh ◽  
Yurii Seluk ◽  
Sergyi Tomchuk
Keyword(s):  
Mathematical Model ◽  
Control Systems ◽  
Distribution Systems ◽  
Traffic Accidents ◽  
Road Traffic ◽  
Center Of Mass ◽  
Dynamic Processes ◽  
Course Stability ◽  
The Stability ◽  
Tank Vehicles

This article discusses the question of the possibility of improving the roll stability of partially filled tank vehicles while braking. We consider the dangers associated with partially filled tank vehicles. We give examples of the severe consequences of road traffic accidents that have occurred with tank vehicles carrying dangerous goods. We conducted an analysis of the dynamic processes of fluid flow in the tank and their influence on the basic parameters of the stability of vehicle. When transporting a partially filled tank due to the comparability of the mass of the empty tank with the mass of the fluid being transported, the dynamic qualities of the vehicle change so that they differ significantly from the dynamic characteristics of other vehicles. Due to large displacements of the center of mass of cargo in the tank there are additional loads that act vehicle and significantly reduce the course stability and the drivability. We consider the dynamics of liquid sloshing in moving containers, and give examples of building a mechanical model of an oscillating fluid in a tank and a mathematical model of a vehicle with a tank. We also considered the method of improving the vehicle’s stability, which is based on the prediction of the moment of action and the nature of the dynamic processes of liquid cargo and the implementation of preventive actions by executive mechanisms. Modern automated control systems (anti-lock brake system, anti-slip control systems, stabilization systems, braking forces distribution systems, floor level systems, etc.) use a certain list of elements for collecting necessary parameters and actuators for their work. This gives the ability to influence the course stability properties without interfering with the design of the vehicle only by making changes to the software of these systems. Keywords: tank vehicle, roll stability, mathematical model, vehicle control systems.

Influence of internal and external risks on sustainability of financial system of Аltai krai

2018 ◽  
Vol 35 (4) ◽  
pp. 133-136
Author(s):  
R. N. Ibragimov
Keyword(s):  
Sustainable Development ◽  
Financial Stability ◽  
Management Strategy ◽  
Financial System ◽  
Risk Management Strategy ◽  
The Sustainable Development ◽  
The Stability ◽  
The Impact

The article examines the impact of internal and external risks on the stability of the financial system of the Altai Territory. Classification of internal and external risks of decline, affecting the sustainable development of the financial system, is presented. A risk management strategy is proposed that will allow monitoring of risks, thereby these measures will help reduce the loss of financial stability and ensure the long-term development of the economy of the region.

On the displacements of the contours of the optic-electronic space images. Mathematical modeling of displacement

2017 ◽  
Vol 992 (4) ◽  
pp. 32-38 ◽  
Author(s):  
E.G. Voronin
Keyword(s):  
Mathematical Modeling ◽  
Remote Sensing ◽  
Mathematical Model ◽  
Point Of View ◽  
Design Features ◽  
Space Images ◽  
Electronic Imaging ◽  
Measuring Accuracy ◽  
Physical Laws

The article opens a cycle of three consecutive publications dedicated to the phenomenon of the displacement of the same points in overlapping scans obtained adjacent CCD matrices with opto-electronic imagery. This phenomenon was noticed by other authors, but the proposed explanation for the origin of displacements and the resulting estimates are insufficient, and developed their solutions seem controversial from the point of view of recovery of the measuring accuracy of opticalelectronic space images, determined by the physical laws of their formation. In the first article the mathematical modeling of the expected displacements based on the design features of a scanning opto-electronic imaging equipment. It is shown that actual bias cannot be forecast, because they include additional terms, which may be gross, systematic and random values. The proposed algorithm for computing the most probable values of the additional displacement and ways to address some of the systematic components of these displacements in a mathematical model of optical-electronic remote sensing.

scholarly journals On the optimal control of coronavirus (2019-nCov) mathematical model; a numerical approach

2020 ◽  
Vol 2020 (1) ◽  
Author(s):  
N. H. Sweilam ◽  
S. M. Al-Mekhlafi ◽  
A. O. Albalawi ◽  
D. Baleanu
Keyword(s):  
Mathematical Model ◽  
Optimal Control ◽  
Weighted Average ◽  
Necessary Optimality Conditions ◽  
Numerical Approach ◽  
Population Number ◽  
Infected People ◽  
The Stability ◽  
Novel Coronavirus ◽  
Theoretical Results

Abstract In this paper, a novel coronavirus (2019-nCov) mathematical model with modified parameters is presented. This model consists of six nonlinear fractional order differential equations. Optimal control of the suggested model is the main objective of this work. Two control variables are presented in this model to minimize the population number of infected and asymptotically infected people. Necessary optimality conditions are derived. The Grünwald–Letnikov nonstandard weighted average finite difference method is constructed for simulating the proposed optimal control system. The stability of the proposed method is proved. In order to validate the theoretical results, numerical simulations and comparative studies are given.

Sign in / Sign up

Export Citation Format

Share Document