scholarly journals Offshore Operating Agreements

1973 ◽  
Vol 11 (3) ◽  
pp. 503
Author(s):  
D. A. MacWilliam ◽  
R. C. Muir
Keyword(s):  
Advantages And Disadvantages ◽  
New Concepts ◽  
Subsequent Determination ◽  
Canadian Company ◽  
Offshore Operations

The following article analyzes the offshore joint operating agreement in detail. Inter alia, the possible corporate forms Canadian company could use, and their respective advantages and disadvantages, are discussed. The authors consider the new concepts and different provisions and procedures that are necessary to deal with the special problems of offshore operations. Operatorship, with its corresponding rights and obligations, is discussed with emphasis on whether or not challenge clause should be included in the agreement. Independent operations, and the subsequent determination of penalties, are reviewed. The authors discuss problems involved with dis position of production, and in particular, the overlift-underlift clause. Other topics examined are offshore lease selection, sharing of platform costs, and arbitration clauses.

Sorption of Se (IV) from aqueous solutions with subsequent determination by X-ray fluorescence analysis

2020 ◽  
Vol 86 (10) ◽  
pp. 5-9
Author(s):  
D. G. Filatova ◽  
A. A. Arkhipenko ◽  
M. A. Statkus ◽  
V. V. Es’kina ◽  
V. B. Baranovskaya ◽  
...  
Keyword(s):  
Inductively Coupled Plasma ◽  
Fluorescence Analysis ◽  
Standard Samples ◽  
Phase Contact Time ◽  
Sorbent Phase ◽  
X Ray ◽  
Fundamental Parameters ◽  
Inductively Coupled ◽  
Subsequent Determination

An approach to sorptive separation of Se (IV) from solutions on a novel S,N-containing sorbent with subsequent determination of the analyte in the sorbent phase by micro-x-ray fluorescence method is presented. The sorbent copolymethylenesulfide-N-alkyl-methylenamine (CMA) was synthesized using «snake in the cage» procedure and proven to be stable in acid solutions. Conditions for quantitative extraction of Se (IV) were determined: sorption in 5 M HCl or 0.05 M HNO3 solutions when heated to 60°C, phase contact time being 1 h. The residual selenium content in the solution was determined by inductively coupled plasma mass spectrometry (ICP-MS) using 82Se isotope. The absence of selenium losses is proved and the mechanism of sorption interaction under specified conditions is proposed. The method of micro-x-ray fluorescence analysis (micro-RFA) with mapping revealed a uniform distribution of selenium on the sorbent surface. The possibility of determining selenium in the sorbent phase by micro-RFA is shown. When comparing the obtained results with the results of calculations by the method of fundamental parameters, it is shown the necessity of using standard samples of sorbates to obtain correct results of RFA determination of selenium in the sorbent phase.

scholarly journals Delay Equivalences in Tuning PID Control for the Double Integrator Plus Dead-Time

Mathematics ◽  
2021 ◽  
Vol 9 (4) ◽  
pp. 328
Author(s):  
Mikulas Huba ◽  
Damir Vrancic
Keyword(s):  
Dead Time ◽  
Pid Controllers ◽  
Noisy Environment ◽  
Advantages And Disadvantages ◽  
Implementation Problem ◽  
Low Pass ◽  
Excellent Control ◽  
Low Pass Filters ◽  
Double Integrator

The paper investigates and explains a new simple analytical tuning of proportional-integrative-derivative (PID) controllers. In combination with nth order series binomial low-pass filters, they are to be applied to the double-integrator-plus-dead-time (DIPDT) plant models. With respect to the use of derivatives, it should be understood that the design of appropriate filters is not only an implementation problem. Rather, it is also critical for the resulting performance, robustness and noise attenuation. To simplify controller commissioning, integrated tuning procedures (ITPs) based on three different concepts of filter delay equivalences are presented. For simultaneous determination of controller + filter parameters, the design uses the multiple real dominant poles method. The excellent control loop performance in a noisy environment and the specific advantages and disadvantages of the resulting equivalences are discussed. The results show that none of them is globally optimal. Each of them is advantageous only for certain noise levels and the desired degree of their filtering.

Significant choice-of-law interests and its impact on the formation of choice-of-law regulation in the field of intellectual property

2021 ◽  
pp. 186
Author(s):  
Svetlana I. Krupko
Keyword(s):  
Intellectual Property ◽  
Property Rights ◽  
Intellectual Property Rights ◽  
The State ◽  
Close Connection ◽  
Choice Of Law ◽  
Applicable Law ◽  
Advantages And Disadvantages ◽  
Special Rules

This article analyzes the choice-of-law interests of specific and potential participants in the relations of intellectual property rights and the state in order to establish the closest connection of the above type of relation with the state, whose law should be applied. Taking into account the directionality of significant choice-of-law interests, advantages and disadvantages of territorial and universal approaches, a theoretically based solution is proposed for the formation of a general choice-of-law rule on the law to be applied to the relation of intellectual property rights. It was revealed in the study that the diversity of the relations of intellectual property rights (their obligatory and non-obligatory, property and personal non-property nature, other differences in legal features) does not automatically generate a multidirectionality of significant choice-of-law interests that should be taken into account when establishing a close connection of the above type of the relation with the state for determination of applicable law, does not prevent the formation of a general choice-of-law rule for the relations of intellectual property rights in general and does not unequivocally testify in favor of the specialization of its binding. However, the diversity of the relations of intellectual property rights should be examined and evaluated for the feasibility and limits of exceptions from the general choice-of-law rule and the development of special rules for resolving certain private of the relations of intellectual property rights.

scholarly journals HCV Detection, Discrimination, and Genotyping Technologies

Sensors ◽  
2018 ◽  
Vol 18 (10) ◽  
pp. 3423 ◽  
Author(s):  
Shrikant Warkad ◽  
Satish Nimse ◽  
Keum-Soo Song ◽  
Taisun Kim
Keyword(s):  
Hepatitis C ◽  
Hcv Infection ◽  
World Health ◽  
Clinical Samples ◽  
Infected People ◽  
Advantages And Disadvantages ◽  
Highly Sensitive ◽  
The World ◽  
Health Organization

According to the World Health Organization (WHO), 71 million people were living with Hepatitis C virus (HCV) infection worldwide in 2015. Each year, about 399,000 HCV-infected people succumb to cirrhosis, hepatocellular carcinoma, and liver failure. Therefore, screening of HCV infection with simple, rapid, but highly sensitive and specific methods can help to curb the global burden on HCV healthcare. Apart from the determination of viral load/viral clearance, the identification of specific HCV genotype is also critical for successful treatment of hepatitis C. This critical review focuses on the technologies used for the detection, discrimination, and genotyping of HCV in clinical samples. This article also focuses on advantages and disadvantages of the reported methods used for HCV detection, quantification, and genotyping.

Application of Electron Backscatter Diffraction for Crystallographic Characterization of Tin Whiskers

2012 ◽  
Vol 18 (4) ◽  
pp. 876-884 ◽  
Author(s):  
Joseph R. Michael ◽  
Bonnie B. McKenzie ◽  
Donald F. Susan
Keyword(s):  
Electron Backscatter Diffraction ◽  
Growth Direction ◽  
Tin Whiskers ◽  
Physical Growth ◽  
Final Choice ◽  
Advantages And Disadvantages ◽  
Electron Backscatter ◽  
Backscatter Diffraction

AbstractUnderstanding the growth of whiskers or high aspect ratio features on substrates can be aided when the crystallography of the feature is known. This study has evaluated three methods that utilize electron backscatter diffraction (EBSD) for the determination of the crystallographic growth direction of an individual whisker. EBSD has traditionally been a technique applied to planar, polished samples, and thus the use of EBSD for out-of-surface features is somewhat more difficult and requires additional steps. One of the methods requires the whiskers to be removed from the substrate resulting in the loss of valuable physical growth relationships between the whisker and the substrate. The other two techniques do not suffer this disadvantage and provide the physical growth information as well as the crystallographic growth directions. The final choice of method depends on the information required. The accuracy and the advantages and disadvantages of each method are discussed.

scholarly journals Indirect spectrophotometric determination of gentamicin and vancomycin antibiotics based on their oxidation by potassium permanganate

2006 ◽  
Vol 4 (4) ◽  
pp. 708-722 ◽  
Author(s):  
Akram El-Didamony ◽  
Alaa Amin ◽  
Ahmed Ghoneim ◽  
Ayman Telebany
Keyword(s):  
Acid Medium ◽  
Potassium Permanganate ◽  
Pharmaceutical Formulations ◽  
Molar Absorptivity ◽  
Reaction Conditions ◽  
Subsequent Determination ◽  
Optimum Reaction ◽  
Acid Orange Ii ◽  
Sulphuric Acid Medium

AbstractFour simple, accurate, sensitive and economical procedures (A–D) for the estimation of gentamicin sulphate and vancomycin hydrochloride, both in pure form and in pharmaceutical formulations have been developed. The methods are based on the oxidation of the studied drugs by a known excess of potassium permanganate in sulphuric acid medium and subsequent determination of unreacted oxidant by reacting it with amaranth dye (method A), acid orange II (method B), indigocarmine (method C) and methylene blue (method D), in the same acid medium at a suitable λmax=521, 485, 610 and 664 nm, respectively. The reacted oxidant corresponds to the drug content. Regression analysis of Beer-Lambert plots showed good correlations in the concentration ranges 4–8, 3–8, 4–9 and 5–9 µg ml−1 with gentamicin and 4–8, 1.5–4, 1.5–4 and 3.5–5.5 µg ml−1 with vancomycin for methods A, B, C, and D, respectively. The molar absorptivity, sandell sensitivity, detection and quantification limits were calculated. The stoichiometric ratios for the cited drugs were studied. The optimum reaction conditions and other analytical parameters were evaluated. The influence of the substance commonly employed as excipients with these drugs were studied. The proposed methods were applied to the determination of these drugs in pharmaceutical formulations. The results have demonstrated that the methods are equally accurate and reproducible as the official methods.

Lattice-constant and stress measurement in single crystals: a new method

2005 ◽  
Vol 38 (4) ◽  
pp. 678-684 ◽  
Author(s):  
Balder Ortner
Keyword(s):  
Single Crystal ◽  
Single Crystals ◽  
Lattice Constant ◽  
Stress Measurement ◽  
New Method ◽  
Lattice Plane ◽  
X Ray ◽  
Advantages And Disadvantages

A method for the X-ray determination of lattice-plane distances is given. Similar to Bond's method, it is based on the measurement of rocking curves, with some advantages and disadvantages compared with the former method. The new method is especially designed for single-crystal stress measurement. Its usefulness is demonstrated in two examples of lattice-constant and stress measurement.

Sign in / Sign up

Export Citation Format

Share Document