scholarly journals Membandingkan Metode SAW Dan MFEP Dalam Penentuan Jurusan di Tingkat SLTA

2019 ◽  
Vol 3 (1) ◽  
pp. 59-65
Author(s):  
Rini Sovia ◽  
Aulia Fitrul Hadi

SMAN 10 Padang is one of the leading schools in the city of Padang State School which has two majors, namely Science (Science Knowledge) and Social Sciences (Social Sciences). A distinctive feature of this school is one of the international standard pilot schools (RSBI) by implementing bilingual and accelerating classes. On average students lack understanding in the selection of majors according to their abilities. Many people fail in the way they have found. To facilitate the determination of majors, a Decision Making System (SPK) is needed to find criteria. In SPK there are several methods in searching criteria, which are usually used by SAW with MFED. Based on the research carried out, by comparing the two methods, the data are grouped into three criteria, namely the value of the Natural Sciences National Examination, Psychology tests, and Interests. The results of this study show about MFEP method take a high accuration between SAW. An accuration of SAW have 38.3 % and MFEP have 70.5%.

2017 ◽  
Author(s):  
Ani Sunalia ◽  
Leon Andretti Abdillah

Data processing in the determination of scholarships in SMK Madyatama to date still use a system that is still manual. Where the absence of a well-computerized system in determining the acceptance of scholarship which then led to the emergence of some problems in this manual system. The problem that often arises is not exactly the distribution of scholarships to students. Problems like this are triggered by the lack of scrutiny of the scholarship selectors in conducting the selection process of the scholarship recipients, which is basically the selection process conducted by teachers from the school itself. The decision-making system at SMK Madyatama will be made using TOPSIS method to determine the right scholarship recipient in accordance with the scholarship recipient criteria. With the decision support system of awarding scholarship recipients at SMK Madyatama Palembang based on this website can help and facilitate the school in evaluating the selection of scholarship receipt.


2020 ◽  
Vol 9 (3) ◽  
pp. 387-394
Author(s):  
Siti Monalisa ◽  
Fakhri Hadi

MAN 1 Inhil is a school that applies ministerial regulations to determine the direction of student majors at the beginning of entry, namely in class X. Determination of majors is done by considering several indicators, namely the results of academic tests, interviews, and student interest. The calculation in determining this course is very simple, namely by adding up the values of each indicator and dividing them together so that an average value is obtained. If the value is fulfilled then the student is grouped based on their interests. This can lead to errors in decision making by the school because it can be subjective because it prioritizes student interests. Therefore we need methods and algorithms to help make decisions well, the decision tree method. One algorithm that can be used is CART algorithm to classify majors with three indicators, namely Natural Sciences, Social Sciences and Religion. The results of this study indicate that the CART algorithm is able to predict correctly, from 360 data classified using the CART algorithm, it can be concluded that 71 data majoring in religion and correctly classified by CART. 144 data majoring in Natural Sciences, 119 data correctly classified and 24 data classified as IPS, and 1 data classified as religion. Of 146 data majoring in social studies, 129 were classified correctly, 16 data were classified as natural sciences. Therefore it can be concluded that CART algorithm has an 80% accuracy so that it can be used in decision making


2019 ◽  
Author(s):  
Tetiana Mazurok ◽  
◽  
Volodymyr Chernykh ◽  

Innovations and progress in teaching, introduction of new academic disciplines in the curricula, changes in the paradigm of school education in Ukraine, the search for innovative tools, techniques and teaching methods, especially teaching STEAM create a good basis for teaching robotics. However, the organization of classes in robotics requires the creation of a special educational ecosystem, which important element is the technical base (equipment). It is not a secret, that administrative staff who sometimes even do not have required experience in technology are often engaged in the procurement of equipment and its selection. The current study was conducted to solve this problem, as well as to create a universal recommendation for creating an appropriate ecosystem for teaching robotics As part of the study, the task was to develop a prototype of an expert decision-making system for selecting of an appropriate equipment and zoning of a classroom (ICR) for conducting classes in robotics. Knowledge-oriented approach was used to create the prototype. Keywords: knowledge-based approach, robotics, adaptive selection, teaching robotics.


Webology ◽  
2021 ◽  
Vol 18 (Special Issue 04) ◽  
pp. 619-625
Author(s):  
Faroman Syarief ◽  
Rustam Effendi ◽  
Amrillah Azrin ◽  
Imam Suroso ◽  
Dhian Tyas Untari

This study aims to be able to provide recommendations in the decision-making system related to the best lecturers at the Jakarta Chapter of the Indonesian Management Lecturer Forum. It is hoped that the research results can be used as input in the Best Lecturer decision making system with a more systematic system. This research was conducted through interviews, questionnaires and literature study related to the Lecturer profession. In the field, the assessment criteria are still rough, therefore this study must include all the criteria into the mechanism, rules, and codes. Analysis, each criterion is analyzed using the AHP (Analytical Hierarchy Process) method in weighting. The cumulative results of the recapitulation of scores show that teaching is still a top priority in the implementation of the Tridaharma of Lecturers, after that the second priority is research, then community service and finally support in the form of participation in supporting activities and scientific development.


2019 ◽  
Vol 8 (4) ◽  
pp. 1694-1698

Learning disabilities (LD) is turning into a major issue in various nations around the globe which can even contrarily influence human common advancement. The undertaking of this work is to help the specialized programme network in their task to be with the standard. The underlying section of the paper gives a comprehensive investigation of the distinctive components of diagnosing learning disabilities. Despite the fact that LD can be analysed early - before 5 years of age, most youngsters were not determined to have LD until the age of nine on account of its unpredictable side effects and unclear indication in children disorder issue. Fuzzy logic K-means clustering has inspired a tremendous transformation in Machine learning and can take and able to resolve a variation of problems. This paper is the elaboration on the strategy for utilizing this mix to encourage the early analysis of LD. Since Fuzzy Logic clustering in Machine Learning is generally considered and connected in different areas of science, we invite all the related analysts from the fields of computer science, engineering, statistics, social sciences, healthcare, and so on, etc. The result of the paper demonstrates that the previously mentioned methodology can possibly be the potential of the supporting decision-making system in LD investigating and diagnosing.


2019 ◽  
Vol 8 (3) ◽  
pp. 7251-7255

In current market conditions, the key to productive economic activity is the ability to provide a high-quality forecast, even in situations of insufficient information. Strategic forecasting refers to this type of activity, errors in which the actions of any company can have a detrimental effect on the fundamental level. The justification and selection of specific management decisions can often be carried out in conditions of uncertainty due to the inability to clearly predict the values of the final results of these decisions. The decision-making system within the framework of the strategic forecasting task should help maintain the effectiveness of actions by simplifying the picture of the real world by modelling it. While allowing to reduce the influence of the subjectivity of the personality of the decision-maker on the decision-making process itself


2019 ◽  
Vol 8 (1) ◽  
pp. 45-54
Author(s):  
M Ilham A Siregar ◽  
Danyl Mallisza ◽  
Wahyuni Yahyan ◽  
Harry Setya Hadi

Private companies, government agencies and educational institutions are still experiencing difficulties in selecting employees / employees who are in accordance with their needs and experts in their respective fields. With the increasing number of workers who have different abilities, recruiting new employees requires selection of prospective employees at Ekasakti University, because if this is done manually, it will make it difficult for the staff to receive and also be prone to mistakes in decision making. The decision making system method (Decisions Support System) can be used to help the selection of new employee recipients with the AHP Method. Selection of new employee admissions by the AHP (Analytical Hierarchy Process) method can help solve the case of selecting employee recruitment. The model of applying dynamic logic applied in the AHP (Analytical Hierarchy Process) has the advantage that the selection process provides very flexible results


Author(s):  
Ye.V. Markelova ◽  
◽  
N.K. Zulina ◽  
O.I. Tomina ◽  
◽  
...  

The article gives definitions to the concepts of "rehabilitation", "habilitation", "individual rehabilitation program", "technical means of rehabilitation". The statistical data on primary disability of children with cerebral palsy in the city of Khabarovsk for the period 2016–2020 are presented. The characteristics of a wheelchair with additional fixation for patients with cerebral palsy are given. The requirements for the provision of disabled people with technical means of rehabilitation (wheelchairs) are noted, the principles of selection and the tasks that must be solved when using them are indicated. The method of correct determination of the parameters of the wheelchair is presented to help doctors of medical organizations in the preparation of referral documents for medical and social examination


Sign in / Sign up

Export Citation Format

Share Document