scholarly journals MWCNT Devices Fabricated by Dielectrophoresis: Study of Their Electrical Behavior Related to Deposited Nanotube Amount for Gas Sensing Applications

2015 ◽  
Vol 10 (1) ◽  
pp. 13-20
Author(s):  
Elisabete Galeazzo ◽  
Marcos C. Moraes ◽  
Henrique E. M. Peres ◽  
Michel O. S. Dantas ◽  
Victor G. C. Lobo ◽  
...  
Keyword(s):  
Carbon Nanotubes ◽  
Gas Sensing ◽  
High Sensitivity ◽  
Cost Effective ◽  
Adsorbed Water ◽  
Fast Response ◽  
Process Time ◽  
Electrical Behavior ◽  
Glass Substrates ◽  
Sensing Applications

Intensive research has been focused on investigating new sensing materials, such as carbon nanotubes (CNT) because of their promising characteristics. However, there are challenges related to their application in commercial devices such as sensitivity, compatibility, and complexity of miniaturization, among others. We report the study of the electrical behavior of devices composed by multi-walled carbon nanotubes (MWCNT) deposited between aluminum electrodes on glass substrates by means of dielectrophoresis (DEP), which is a simple and cost-effective method. The devices were fabricated by varying the DEP process time. Remarkable changes in their electric resistance were noticed depending on the MWCNT quantities deposited. Other electrical properties of devices such as high sensitivity, fast response time and stability are also characterized in humid environment. A humidity sensing mechanism is proposed on the basis of charge transfer between adsorbed water molecules and the MWNTC surface or between water and the glass surface.

scholarly journals The Effect of CH4 and CO2 Exposure on Carbon Nanotubes Electrical Resistance

2011 ◽  
Vol 214 ◽  
pp. 655-661 ◽  
Author(s):  
Amin Firouzi ◽  
Shafreeza Sobri ◽  
Faizah Mohd Yasin ◽  
Fakhru'l Razi Ahmadun
Keyword(s):  
Carbon Nanotubes ◽  
Electrical Resistance ◽  
Gas Sensing ◽  
Quartz Substrate ◽  
Chemical Vapor ◽  
High Sensitivity ◽  
Sensing Applications ◽  
Type Semiconductor ◽  
Adsorption Of Co2 ◽  
P Type

This research was carried out to monitor and investigate the gas sensing effects on carbon nanotubes (CNTs) by a systematic study of the variations in the electrical resistance as sensor signal induced by adsorption of CO2 and CH4 gaseous molecules. The CNTs were synthesized by Floating Catalyst Chemical Vapor Deposition (FC-CVD) method on quartz substrate under benzene bubble at temperature of 700°C. Then, they were tested for gas sensing applications operating at room temperature. Upon exposure to gaseous molecules, the electrical resistance of CNTs dramatically increased for both CO2 and CH4 gases with short response time and high sensitivity. It was also observed that the CNTs device behaves as a p-type semiconductor when exposed to gaseous molecules. In addition, the recovery of the sensors and mechanism of gas sensing procedure are discussed.

scholarly journals Reusable TiN Substrate for Surface Plasmon Resonance Heterodyne Phase Interrogation Sensor

Nanomaterials ◽  
2020 ◽  
Vol 10 (7) ◽  
pp. 1325 ◽  
Author(s):  
Ru-Jing Sun ◽  
Hung Ji Huang ◽  
Chien-Nan Hsiao ◽  
Yu-Wei Lin ◽  
Bo-Huei Liao ◽  
...  
Keyword(s):  
Refractive Index ◽  
Surface Plasmon Resonance ◽  
Surface Plasmon ◽  
Plasmon Resonance ◽  
High Sensitivity ◽  
Nanorod Array ◽  
Glass Substrates ◽  
Sensing Applications ◽  
Bulk Charge ◽  
Phase Interrogation

A TiN-based substrate with high reusability presented high-sensitivity refractive index measurements in a home-built surface plasmon resonance (SPR) heterodyne phase interrogation system. TiN layers with and without additional inclined-deposited TiN (i-TiN) layers on glass substrates reached high bulk charge carrier densities of 1.28 × 1022 and 1.91 × 1022 cm−3, respectively. The additional 1.4 nm i-TiN layer of the nanorod array presented a detection limit of 6.1 × 10−7 RIU and was higher than that of the 46 nm TiN layer at 1.2 × 10−6 RIU when measuring the refractive index of a glucose solution. Furthermore, the long-term durability of the TiN-based substrate demonstrated by multiple processing experiments presented a high potential for various practical sensing applications.

Effect of Operating Temperature on Characteristics of Single-Walled Carbon Nanotubes Gas Sensor

2005 ◽  
Vol 486-487 ◽  
pp. 485-488 ◽  
Author(s):  
Hong Quang Nguyen ◽  
Mai Van Trinh ◽  
Jeung Soo Huh
Keyword(s):  
Carbon Nanotubes ◽  
Gas Sensor ◽  
Gas Adsorption ◽  
Operating Temperature ◽  
High Sensitivity ◽  
Single Walled Carbon Nanotubes ◽  
Fast Response ◽  
Carrier Gas ◽  
Single Walled Carbon ◽  
Walled Carbon Nanotubes

The effect of operating temperature on characteristics of single-walled carbon nanotubes (SWNT) based gas sensor was investigated. SWNT-based sensor was fabricated from SWNT powder (Iljin Nanotech, Korea) by screen-printing method. SWNT powder (30 mg, AP grade) was dispersed into 0.78 gram a-terpineol (Aldrich) by ultrasonic vibration for 1 hour then stirred manually for 1 hour to increase adhesion. From this condensed solution, a thick film of SWNT was printed onto alumina substrates. The film then was sintered at 300oC for 2 hours to remove residual impurities. Upon exposure to some gases such as nitrogen, ammonia or nitric oxide, resistance of the sensor dramatically changes due to gas adsorption. In our experiments, SWNT-based sensor was employed to detect NH3 gas in N2 ambience. After saturated of N2, the sensor exposes to NH3 with various concentrations (from 5 ppm to 100 ppm, diluted by N2 as carrier gas). This sensor exhibits a fast response, high sensitivity but slow recovery at room temperature. By heating at high temperature and increasing the flow-rate of carrier gas, NH3 gas desorbs easily and recovery of the sensor improved. The heating also influenced the characteristics of sensors such as response and reproducibility. Other special changes in electric property of SWNT-based sensor caused by heating are also discussed.

scholarly journals A Novel Type Room Temperature Surface Photovoltage Gas Sensor Device 

2018 ◽  
Author(s):  
Monika Kwoka ◽  
Michal A. Borysiewicz ◽  
Pawel Tomkiewicz ◽  
Anna Piotrowska ◽  
Jacek Szuber
Keyword(s):  
Gas Sensor ◽  
Room Temperature ◽  
Gas Sensing ◽  
Signal To Noise Ratio ◽  
High Sensitivity ◽  
Fast Response ◽  
Surface Photovoltage ◽  
Kelvin Probe ◽  
Sensor Device ◽  
Developed Surface

In this paper a novel type of a highly sensitive gas sensor device based on the surface photovoltage effect is described. The developed surface photovoltage gas sensor is based on a reverse Kelvin probe approach. As the active gas sensing electrode the porous ZnO nanostructured thin films are used deposited by the direct current (DC) reactive magnetron sputtering method exhibiting the nanocoral surface morphology combined with an evident surface nonstoichiometry related to the unintentional surface carbon and water vapor contaminations. Among others, the demonstrated SPV gas sensor device exhibits a high sensitivity of 1 ppm to NO2 with a signal to noise ratio of about 50 and a fast response time of several seconds under the room temperature conditions.

Easy-to-Fabricate K2Pd(SO3)2-Dyed Polyester Fabric with Highly Selective and Fast Response to Carbon Monoxide

2021 ◽  
Vol 21 (8) ◽  
pp. 4400-4405
Author(s):  
Junyeop Lee ◽  
Nam Gon Do ◽  
Dong Hyuk Jeong ◽  
Sae-Wan Kim ◽  
Maeum Han ◽  
...  
Keyword(s):  
Carbon Monoxide ◽  
Color Change ◽  
High Sensitivity ◽  
Cost Effective ◽  
Fast Response ◽  
Polyester Fabric ◽  
High Porosity ◽  
Sensing Material ◽  
Sensitivity And Selectivity ◽  
And Performance

Carbon monoxide (CO) is an odorless, colorless, tasteless, extremely flammable, and highly toxic gas. It is produced when there is insufficient oxygen supply during the combustion of carbon to produce carbon dioxide (CO2). CO is produced from operating engines, stoves, or furnaces. CO poisoning occurs when CO accumulates in the bloodstream and can result in severe tissue damage or even death. Many types of CO sensors have been reported, including electrochemical, semiconductor metal-oxide, catalytic combustion, thermal conductivity, and infrared absorption-type for the detection of CO. However, despite their excellent selectivity and sensitivity, issues such as complexity, power consumption, and calibration limit their applications. In this study, a fabricbased colorimetric CO sensor is proposed to address these issues. Potassium disulfitopalladate (II) (K2Pd(SO3)2) is dyed on a polyester fabric as a sensing material for selective CO detection. The sensing characteristics and performance are investigated using optical instruments such as RGB sensor and spectrometer. The sensor shows immediate color change when exposed to CO at a concentration that is even lower than 20 ppm before 2 min. The fast response time of the sensor is attributed to its high porosity to react with CO. This easy-to-fabricate and cost-effective sensor can detect and prevent the leakage of CO simultaneously with high sensitivity and selectivity toward CO.

Carbon Materials for Gas and Bio-Sensing Applications Beyond Graphene

2021 ◽  
pp. 39-68
Keyword(s):  
Carbon Nanotubes ◽  
Active Site ◽  
Material Science ◽  
Gas Sensing ◽  
Functionalized Nanoparticles ◽  
Sensing Applications ◽  
Electrochemical Biosensing ◽  
New Ideas ◽  
Enzymatic Biosensors ◽  
Enhanced Stability

The development of technology in the area of material science and nanotechnology is a worldwide concern to researchers for generating a substance by synthesizing nanoparticles with required properties. Carbonaceous materials have gained numerous interests because of their direct electron or charge transfer capacity between active site reception and functionalized nanoparticles without involvement of a mediator. However, among all existing materials, carbon nanotubes have been proven to elite beyond graphene. Carbon nanotubes (CNTs) possess extraordinary electrochemical biosensing and gas sensing due to their specific properties. This encourages researchers to gain new ideas about construction and development of immunosensors, genosensors, enzymatic biosensors and specific gas sensors based on above nanoparticles. Qualification of working electrode via incorporation of two or more of these nanoparticles gives enhanced stability, better sensitivity and functionality to the sensor. This chapter reviews basic information about sensors, their types, functionalization, fabrication mechanisms and applications for future prospective.

scholarly journals A Review of Carbon Nanotubes-Based Gas Sensors

2009 ◽  
Vol 2009 ◽  
pp. 1-24 ◽  
Author(s):  
Yun Wang ◽  
John T. W. Yeow
Keyword(s):  
Carbon Nanotubes ◽  
Gas Sensors ◽  
Gas Sensing ◽  
Low Cost ◽  
High Surface ◽  
Hollow Structure ◽  
Volume Ratio ◽  
Fast Response ◽  
Sensing Technology ◽  
Structure Of Nanomaterials

Gas sensors have attracted intensive research interest due to the demand of sensitive, fast response, and stable sensors for industry, environmental monitoring, biomedicine, and so forth. The development of nanotechnology has created huge potential to build highly sensitive, low cost, portable sensors with low power consumption. The extremely high surface-to-volume ratio and hollow structure of nanomaterials is ideal for the adsorption of gas molecules. Particularly, the advent of carbon nanotubes (CNTs) has fuelled the inventions of gas sensors that exploit CNTs' unique geometry, morphology, and material properties. Upon exposure to certain gases, the changes in CNTs' properties can be detected by various methods. Therefore, CNTs-based gas sensors and their mechanisms have been widely studied recently. In this paper, a broad but yet in-depth survey of current CNTs-based gas sensing technology is presented. Both experimental works and theoretical simulations are reviewed. The design, fabrication, and the sensing mechanisms of the CNTs-based gas sensors are discussed. The challenges and perspectives of the research are also addressed in this review.

Effects of Preparing Conditions on NO2-Sensing Properties of Sputtered WO3 Nano-Films

2013 ◽  
Vol 690-693 ◽  
pp. 1680-1684
Author(s):  
Feng Yun Sun ◽  
Ming Hu ◽  
Peng Sun
Keyword(s):  
Gas Sensing ◽  
High Sensitivity ◽  
Fast Response ◽  
Optimal Parameters ◽  
Working Pressure ◽  
Sensing Properties ◽  
Dc Reactive Magnetron Sputtering ◽  
Experiment Method ◽  
Discharge Gas ◽  
Gas Ratio

WO3 nano-films were deposited on Al2O3 substrate by dc reactive magnetron sputtering method. The effects of preparing conditions, such as the discharge gas ratio (Ar:O2), working pressure, sputtering time and annealing temperature on microstructure, crystalline state and NO2-sensing properties of WO3 nano-films were investigated by orthogonal trial experiment method. The optimum technological conditions were determined by orthogonal test and extreme difference analysis. The crystallization, morphology and composition of WO3 thin film obtained at the optimal parameters were studied by XRD, SEM and XPS. The gas sensing mechanism was also studied. WO3 nano-film shows high sensitivity, fast response, good selectivity at the best operating temperature 200°C.

Sign in / Sign up

Export Citation Format

Share Document