scholarly journals Pulsed laser deposition to investigate structural and optical properties of lead sulfide nanostructure

2020 ◽  
Vol 18 (47) ◽  
pp. 21-32
Author(s):  
Emad J. Mohammed ◽  
Ahmed K. Abbas ◽  
Kadhim A. Aadim
Keyword(s):  
Thin Films ◽  
Optical Properties ◽  
Lead Sulfide ◽  
Laser Energy ◽  
Laser Deposition ◽  
X Ray Diffraction ◽  
Structural And Optical Properties ◽  
Glass Substrates ◽  
Atomic Force ◽  
Structure Properties

In this work, the structure properties of nano Lead sulfide PbS thin films are studied. Thin samples were prepared by pulse laser deposition and deposited on glass substrates at wavelength 1064nm wavelength with a various laser energies (200,300,400,500)nm. The study of atomic force microscope (AFM) and X-ray diffraction as well as the effect of changing the laser energy on the structural properties has been studied. It has been observed that the membrane formed is of the polycrystalline type and the predominant phase is the plane (111) and (200). The minimum grain size obtained was 16.5 nm at a laser energy about 200 mJ. The results showed that thin films of average granular sizes (75 nm) could be prepared.As for the optical properties, the effect of changing the laser energy on them was studied, and it was found that they have direct allowed transitions in the range of (1.55 to 2.45) eV

scholarly journals Laser energy effect on the properties of ZnS thin films prepared by PLD technique

2019 ◽  
Vol 11 (21) ◽  
pp. 84-90
Author(s):  
Esraa K. Hamed
Keyword(s):  
Thin Films ◽  
Laser Energy ◽  
Pulsed Laser ◽  
Laser Deposition ◽  
Deposition Technique ◽  
X Ray Diffraction ◽  
Energy Effect ◽  
X Ray ◽  
Glass Substrates ◽  
Atomic Force

Zinc sulfide (ZnS) thin films were deposited on glass substrates using pulsed laser deposition technique. The laser used is the Q-switched Nd: YAG laser with 1064nm wavelength and 1Hz pulse repetition rate and varying laser energy 700mJ-1000mJ with 25 pulse. The substrate temperature was kept constant at 100°C. The structural, morphological and optical properties of ZnS thin films were characterized with X-ray diffraction (XRD), scanning electron microscopy (SEM), atomic force microscope (AFM) and UV-VIS spectrophotometer.

Effect of Different Radios of Two Complexes on the Structural and Optical Properties of ZnS Thin Films

2014 ◽  
Vol 986-987 ◽  
pp. 47-50
Author(s):  
Jin Shang ◽  
Huan Ke ◽  
Shu Wang Duo ◽  
Ting Zhi Liu ◽  
Hao Zhang
Keyword(s):  
Thin Films ◽  
Optical Properties ◽  
Visible Region ◽  
Deposition Process ◽  
X Ray Diffraction ◽  
High Concentration ◽  
Structural And Optical Properties ◽  
Glass Substrates ◽  
Direct Band ◽  
Cbd Method

ZnS thin films were deposited at three different radios of V(NH3·H2O)/V(N2H4) on glass substrates by chemical bath deposition (CBD) method without stirring the deposition bath during the deposition process. The structural and optical properties were analyzed by X-ray diffraction (XRD) and UV-VIS spectrophotometer. The results showed that ZnS thin film deposited at the radio of V(NH3·H2O)/V(N2H4)=15:15 is higher than that of the other two different solutions. With the radio of V(NH3·H2O)/V(N2H4) decreasing from 15:5 to 15:15, homogenous precipitation of Zn (OH)2easily forms in the bath, but ZnS precipitation first become suppressed and then easily forms in solution. It means that the concentration of OH-ion increases with the volume of N2H4increasing, which accelerates the formation of Zn (OH)2. However, when the volume of N2H4increases to 15mL, relatively high concentration of OH-ion not only accelerates the formation of Zn (OH)2, but also be used to the hydrolysis of thiourea. The average transmissions of all the ZnS films from three different solutions (V(NH3·H2O)/V(N2H4)=15:5, 15:10 and 15:15) are greater than 90% for wavelength values in visible region. The direct band gaps range from 3.80 to 4.0eV. The ZnS film deposited for 2.5h with the radio of V(NH3·H2O)/V(N2H4)=15:15 has the cubic structure only after single deposition.

Structural and Optical Properties of PbI2 Thin Films to Fabricate Perovskite Solar Cells

2020 ◽  
Vol 398 ◽  
pp. 140-146
Author(s):  
Kawther A. Khalaph ◽  
Zainab J. Shanan ◽  
Aqel Mashot Jafar ◽  
Falah Mustafa Al-Attar
Keyword(s):  
Thin Films ◽  
Optical Properties ◽  
Energy Gap ◽  
Perovskite Solar Cells ◽  
Lead Iodide ◽  
Structural And Optical Properties ◽  
Solar Cell Application ◽  
Force Microscopy ◽  
Glass Substrates ◽  
Atomic Force

Recently, lead iodide is the most materials employment in the perovskite solar cell application. This paper has studied the character of preparation, structural and optical properties of pbI2 materials. Structural properties are included investigation of the measurements X-Ray Diffraction (XRD), Scan Electron Microscopy (SEM), Fourier Transform InfraRed spectroscopy (FTIR) and Atomic Force Microscopy (AFM) tests to the PbI2 thin films samples. Optical properties are included the investigation UV-Vis test of the thin film samples deposited on glass substrates and investigated the Absorption, Transmittance and evaluated energy gap (Eg = 2.3 eV).

scholarly journals Impact of ZnO Atomic Ratio on Structural, Morphological and Some Optical Properties of (SnO2)1-x (ZnO)x Thin Films

2020 ◽  
pp. 333-340
Author(s):  
Donia Yas Khudair ◽  
Ramiz Ahmed Al Ansari
Keyword(s):  
Thin Films ◽  
Optical Properties ◽  
Energy Gap ◽  
Atomic Ratio ◽  
X Ray Diffraction ◽  
X Ray ◽  
Glass Substrates ◽  
Atomic Force ◽  
Uv Visible ◽  
Longitudinal Structures

In this work, SnO2 and (SnO2)1-x(ZnO)x composite thin films with different ZnO atomic ratios (x=0, 5, 10, 15 and 20%) were prepared by pulsed laser deposition technique on clean glass substrates at room temperature without any treatment. The deposited thin films were characterized by x-ray diffraction atomic force microscope  and UV-visible spectrophotometer to study the effect of the ZnO atomic ratio on their structural, morphological and optical properties. It was found that the crystallinety and the crystalline size vary according to ZnO atomic ratio. The surface appeared as longitudinal structures which was convert to spherical shapes with increasing ZnO atomic ratio. The optical transmission and energy gap increased with increasing ZnO atomic ratio. 

scholarly journals Temperature effect on structural and optical properties of V2O5 thin films prepared by spray pyrolysis technique

2020 ◽  
Vol 307 ◽  
pp. 01033
Author(s):  
Asmaa Mrigal ◽  
Lahocine El Gana ◽  
Mouhamed Addou ◽  
Khadija Bahedi ◽  
Rajae Temsamani ◽  
...  
Keyword(s):  
Thin Films ◽  
Optical Properties ◽  
Energy Gap ◽  
Spray Pyrolysis Technique ◽  
Three Dimensional ◽  
X Ray Diffraction ◽  
Structural And Optical Properties ◽  
X Ray ◽  
Glass Substrates ◽  
Optical Dielectric Constant

In this work, the effect of substrate temperature on structural and optical properties of V2O5 thin films has been characterized by X-ray diffraction (XRD); SEM and transmission. The films mince has been prepared by Reactive Chemical Spraying technology in Liquid Phase (RCSLP) on glass substrates preheated at (350, 400, 450 and 500 °C). The X-ray diffraction analysis confirms that all layers are polycrystalline, and the preferred orientation of V2O5 is the (001) plane. The morphology of V2O5 thin films are porous nature and their particle’s shape is three-dimensional. The transmittance and absorbance of thin film were measured from which the optical constants (Energy gap, Refractive index, Absorption coefficient, Extinction coefficient and Optical dielectric constant) were determined.

Structural and Optical Properties of Pulse Laser Deposited TiO2 Thin Films

2013 ◽  
Vol 537 ◽  
pp. 224-228
Author(s):  
Yi Liu ◽  
Hong Mo Huang ◽  
Xiao Dong Lin
Keyword(s):  
Thin Films ◽  
Optical Properties ◽  
Substrate Temperature ◽  
Crystalline Structure ◽  
Laser Deposition ◽  
X Ray Diffraction ◽  
Structural And Optical Properties ◽  
Tio2 Thin Films ◽  
X Ray ◽  
Quartz Glasses

TiO2 thin films were prepared on quartz glasses by pulsed laser deposition (PLD) using a KrF laser excimer. The crystalline structure was characterized by X-ray diffraction, and the optical properties of the films were investigated using spectroscopic ellipsometry and UV-vis spectra respectively. The effects of the PLD conditions, including substrate temperature and O2 pressure on the crystalline structure and the optical properties of the films were investigated. The results indicated that there are a suitable substrate temperature and an O2 pressure which is favorable for the synthesis of anatase-type TiO2.

Substrate Temperature Effect on Structural and Optical Properties of ZnO Thin Films Deposited by Spray Pyrolysis

2019 ◽  
Vol 397 ◽  
pp. 1-7
Author(s):  
Hassene Nezzari ◽  
Riad Saidi ◽  
Adel Taabouche ◽  
Meriem Messaoudi ◽  
Mohamed Salah Aida
Keyword(s):  
Thin Films ◽  
Optical Properties ◽  
Substrate Temperature ◽  
Hexagonal Structure ◽  
Zno Thin Films ◽  
X Ray Diffraction ◽  
Structural And Optical Properties ◽  
Glass Substrates ◽  
Uv Visible ◽  
Heated Glass

In this work, ZnO thin films grown on heated glass substrates in a temperature range of 300 to 500 °C with a 50°C step. The prepared solution is composed of methanol and zinc acetate Zn(CH3COO)2.2H2O. ZnO thin films are deposited by pyrolysis spray technique, our work focuses on the study of the substrate temperature influence on the structural and optical properties of these layers. Therefore, The X-ray diffraction, showed a Wurtzit hexagonal structure of elaborated films, with (002) as a preferred orientation, and a grain size of 64 to 74 nm. The optical transmission spectroscopy UV-Visible, illustrated an increase of optical band gap from 3.19 to 3.25 eV, proportionally with the substrate temperature.

Structural and Optical Properties of CdS Thin Films Grown by Sputtering

2011 ◽  
Vol 306-307 ◽  
pp. 265-268
Author(s):  
Xue Yan Zhang ◽  
Xiao Yu Liu ◽  
Han Bin Wang ◽  
Xi Jian Zhang ◽  
Qing Pu Wang ◽  
...  
Keyword(s):  
Thin Films ◽  
Optical Properties ◽  
Visible Range ◽  
X Ray Diffraction ◽  
Structural And Optical Properties ◽  
X Ray ◽  
Glass Substrates ◽  
Grain Sizes ◽  
Cds Thin Films ◽  
Cds Films

Cadmium sulfide (CdS) thin films with (111) preferential orientation were grown on glass substrates at room temperature by radio frequency (R.F.) magnetron sputtering. The structural and optical properties of CdS films have been investigated by X-ray diffraction, Scanning Electron Microscope micrographs, PL spectra and transmittance spectra. The grain sizes have been evaluated. The transmission spectra of the obtained films reveal a relatively high transmission coefficient (80%) in the visible range. All these results show that the grain sizes increased while the optical band gap decreased with increasing the thickness of CdS films.

Structural and optical properties of Tin Oxide and Indium doped SnO2 thin films deposited by thermal evaporation technique

2016 ◽  
Vol 12 (3) ◽  
pp. 4394-4399
Author(s):  
Sura Ali Noaman ◽  
Rashid Owaid Kadhim ◽  
Saleem Azara Hussain
Keyword(s):  
Thin Films ◽  
Optical Properties ◽  
Tin Oxide ◽  
Thermal Evaporation ◽  
Pure Sno2 ◽  
X Ray Diffraction ◽  
Structural And Optical Properties ◽  
X Ray ◽  
Evaporation Technique ◽  
Sno2 Thin Films

Tin Oxide and Indium doped Tin Oxide (SnO2:In) thin films were deposited on glass and Silicon  substrates  by  thermal evaporation technique.  X-ray diffraction pattern of  pure SnO2 and SnO2:In thin films annealed at 650oC and the results showed  that the structure have tetragonal phase with preferred orientation in (110) plane. AFM studies showed an inhibition of grain growth with increase in indium concentration. SEM studies of pure  SnO2 and  Indium doped tin oxide (SnO2:In) ) thin films showed that the films with regular distribution of particles and they have spherical shape.  Optical properties such as  Transmission , optical band-gap have been measured and calculated.

Sign in / Sign up

Export Citation Format

Share Document