scholarly journals Impact of ZnO Atomic Ratio on Structural, Morphological and Some Optical Properties of (SnO2)1-x (ZnO)x Thin Films

2020 ◽  
pp. 333-340
Author(s):  
Donia Yas Khudair ◽  
Ramiz Ahmed Al Ansari
Keyword(s):  
Thin Films ◽  
Optical Properties ◽  
Energy Gap ◽  
Atomic Ratio ◽  
X Ray Diffraction ◽  
X Ray ◽  
Glass Substrates ◽  
Atomic Force ◽  
Uv Visible ◽  
Longitudinal Structures

In this work, SnO2 and (SnO2)1-x(ZnO)x composite thin films with different ZnO atomic ratios (x=0, 5, 10, 15 and 20%) were prepared by pulsed laser deposition technique on clean glass substrates at room temperature without any treatment. The deposited thin films were characterized by x-ray diffraction atomic force microscope  and UV-visible spectrophotometer to study the effect of the ZnO atomic ratio on their structural, morphological and optical properties. It was found that the crystallinety and the crystalline size vary according to ZnO atomic ratio. The surface appeared as longitudinal structures which was convert to spherical shapes with increasing ZnO atomic ratio. The optical transmission and energy gap increased with increasing ZnO atomic ratio. 

scholarly journals Temperature effect on structural and optical properties of V2O5 thin films prepared by spray pyrolysis technique

2020 ◽  
Vol 307 ◽  
pp. 01033
Author(s):  
Asmaa Mrigal ◽  
Lahocine El Gana ◽  
Mouhamed Addou ◽  
Khadija Bahedi ◽  
Rajae Temsamani ◽  
...  
Keyword(s):  
Thin Films ◽  
Optical Properties ◽  
Energy Gap ◽  
Spray Pyrolysis Technique ◽  
Three Dimensional ◽  
X Ray Diffraction ◽  
Structural And Optical Properties ◽  
X Ray ◽  
Glass Substrates ◽  
Optical Dielectric Constant

In this work, the effect of substrate temperature on structural and optical properties of V2O5 thin films has been characterized by X-ray diffraction (XRD); SEM and transmission. The films mince has been prepared by Reactive Chemical Spraying technology in Liquid Phase (RCSLP) on glass substrates preheated at (350, 400, 450 and 500 °C). The X-ray diffraction analysis confirms that all layers are polycrystalline, and the preferred orientation of V2O5 is the (001) plane. The morphology of V2O5 thin films are porous nature and their particle’s shape is three-dimensional. The transmittance and absorbance of thin film were measured from which the optical constants (Energy gap, Refractive index, Absorption coefficient, Extinction coefficient and Optical dielectric constant) were determined.

Optical properties of anatase TiO2 films modified by N ion implantation

2012 ◽  
Vol 90 (1) ◽  
pp. 39-43 ◽  
Author(s):  
X. Xiang ◽  
D. Chang ◽  
Y. Jiang ◽  
C.M. Liu ◽  
X.T. Zu
Keyword(s):  
Thin Films ◽  
Ion Implantation ◽  
Photoelectron Spectroscopy ◽  
Radio Frequency Magnetron Sputtering ◽  
X Ray Diffraction ◽  
X Ray ◽  
Atomic Force ◽  
Light Region ◽  
Uv Visible ◽  
Substrate Temperatures

Anatase TiO2 thin films are deposited on K9 glass samples at different substrate temperatures by radio frequency magnetron sputtering. N ion implantation is performed in the as-deposited TiO2 thin films at ion fluences of 5 × 1016, 1 × 1017, and 5 × 1017 ions/cm2. X-ray diffraction, atomic force microscope, X-ray photoelectron spectroscopy (XPS), and UV–visible spectrophotometer are used to characterize the films. With increasing N ion fluences, the absorption edges of anatase TiO2 films shift to longer wavelengths and the absorbance increases in the visible light region. XPS results show that the red shift of TiO2 films is due to the formation of N–Ti–O compounds. As a result, photoactivity is enhanced with increasing N ion fluence.

Synthesis, Characterization and Optical Properties of PLA / P3HT Blends Thin Films

2021 ◽  
Vol 19 (5) ◽  
pp. 132-138
Author(s):  
Maan Abd-Alameer Salih ◽  
Q.S. Kareem ◽  
Mohammed Hadi Shinen
Keyword(s):  
Thin Films ◽  
Optical Properties ◽  
Spin Coating ◽  
Ring Opening ◽  
Energy Gap ◽  
Ring Opening Polymerization ◽  
X Ray Diffraction ◽  
X Ray ◽  
Conductivity Increase ◽  
Ft Ir

In this exploration Poly lactic corrosive (PLA) was orchestrated the ring-opening polymerization Poly lactic corrosive (PLA) blended with poly(3-hexylthiophene) (P3HT) which prepared by solution. Blends thin films Synthesis by spin coating technique and using Tetrahydrofuran (THF) as solvent. PLA powder was 'characterized by' 'X-ray' 'diffraction', '(FT-IR)'. pure Optical properties (PLA), (PLA)/P3HT blends thin films with different percentage of P3HT (0, 1, 2, and 3) wt% were investigated using UV-VS spectroscopy The results showed that the absorption, absorption coefficient, extinction coefficient and conductivity increase with increasing the rate of deformation P3HT, The energy gap decreases with increasing deformation.

scholarly journals Laser induced plasma of cadmium oxide: structural, morphological and optical properties

2021 ◽  
Vol 2114 (1) ◽  
pp. 012012
Author(s):  
Tamara S. Hussein ◽  
Ala F. Ahmed
Keyword(s):  
Optical Properties ◽  
Energy Gap ◽  
Cadmium Oxide ◽  
X Ray Diffraction ◽  
Structural And Optical Properties ◽  
Optical Energy Gap ◽  
X Ray ◽  
Laser Induced Plasma ◽  
Atomic Force ◽  
Doping Ratio

Abstract In this study, the effect of grafting with Iron (Fe) ratios (0.1, 0.3 and 0.5) on the structural and optical properties of cadmium oxide films (CdO) was studied, as these films were prepared on glass bases using the method of pulse laser deposition (PLD). The crystallization nature of the prepared films was examined by X-ray diffraction technique (XRD), which showed that the synthesis of the prepared films is polycrystalline, and Atomic Force Microscope (AFM) images also showed that the increased vaccination with Iron led to an increase in the crustal size ratio and a decrease in surface roughness, The absorption coefficient was calculated and the optical energy gap for the prepared thin films. It was found the absorption decreases and the energy gap decreases with the increase of doping ratio.

Effect of Second Complexing Agent of N2H4 on the Optical and Structural Properties of ZnS Thin Films

2013 ◽  
Vol 591 ◽  
pp. 297-300
Author(s):  
Huan Ke ◽  
Shu Wang Duo ◽  
Ting Zhi Liu ◽  
Hao Zhang ◽  
Xiao Yan Fei
Keyword(s):  
Thin Films ◽  
Optical Properties ◽  
Structural Properties ◽  
Band Gaps ◽  
Complexing Agent ◽  
X Ray Diffraction ◽  
Sphalerite Structure ◽  
X Ray ◽  
Glass Substrates ◽  
Zns Films

ZnS films have been deposited on glass substrates by chemical bath deposition (CBD). The optical and structural properties were analyzed by UV-VIS spectrophotometer and X-ray diffraction (XRD). The results showed that the prepared thin films from the solution using N2H4 as second complexing agent were thicker than those from the solution without adding N2H4 in; this is due to using second complexing agent of N2H4, the deposition mechanisms change which is conductive to heterogeneous deposition. When using N2H4 as second complexing agent, the crystallinity of ZnS thin films improved with a significant peak at 2θ=28.96°which can be assigned to the (111) reflection of the sphalerite structure. The transmittances of the prepared films from the solution adding N2H4 in as second complexing agent were over 85%, compared to those from the solution without N2H4 (over 95%). The band gaps of the ZnS films from the solution using N2H4 as second complexing agent were larger (about 4.0eV) than that from those from the solution without N2H4 (about 3.98eV), which indicated that the prepared ZnS films from the solution adding N2H4 in as second complexing agent were better used as buffer layer of solar cells with adequate optical properties. In short, using N2H4 as second complexing agent, can greatly improve the optical and structural properties of the ZnS thin films.

Optical Characteristics of Tungsten Oxide Thin Films Prepared by Sputtering Technique

2010 ◽  
Vol 295-296 ◽  
pp. 11-17
Author(s):  
S.A. Aly
Keyword(s):  
Optical Properties ◽  
Tungsten Oxide ◽  
Energy Gap ◽  
Structural Characteristics ◽  
X Ray Diffraction ◽  
Remarkable Change ◽  
X Ray ◽  
Glass Substrates ◽  
Tungsten Oxide Thin Films ◽  
Reflectance Measurements

The optical properties of tungsten oxide (WO3) films prepared by DC sputtering on unheated glass substrates with different film thicknesses have been studied. The structural characteristics of the samples were investigated using X-ray diffraction. The optical properties of the prepared films were studied by transmittance and reflectance measurements, and the integrated transmittance (TUV, TVIS, and TNIR) and absorption (AUV, AVIS, and ANIR) in UV, VIS and NIR regions. The integrated UV absorption and transmittance are varied with the film thicknesses, also, no remarkable change in VIS and NIR regions was observed. The dependence of refractive index as well as extinction coefficient on wavelength was also reported. The energy gap was calculated and is located around 3.25 eV.

Structural Properties of Ag-Based Chalcopyrite Compound Thin Films for Solar Cells

2005 ◽  
Vol 865 ◽  
Author(s):  
Hiroki Ishizaki ◽  
Keiichiro Yamada ◽  
Ryouta Arai ◽  
Yasuyuki Kuromiya ◽  
Yukari Masatsugu ◽  
...  
Keyword(s):  
Thin Films ◽  
Rietveld Analysis ◽  
Atomic Ratio ◽  
Band Gap Energy ◽  
X Ray Diffraction ◽  
Structural And Optical Properties ◽  
X Ray ◽  
Glass Substrates ◽  
Crystallographic Property ◽  
Chalcopyrite Compound

AbstractAgGa5Se8 and Ag(In1-xGax)Se2 thin films with different Ag/Ga atomic ratios have been deposited on the corning 1737 glass substrates by molecular beam epitaxy (MBE) system. This crystallographic property of AgGa5Se8 thin films has been investigated by x-ray diffraction and rietveld analysis. These films had the tetragonal structure with the space group of P-42m, regardless of Ag/Ga atomic ratio. The lattice parameters and the optical band gap energy decreased with an increase in the Ag/Ga atomic ratio. Thus, the structural and optical properties of these AgGa5Se8 thin films were controlled by the Ag/Ga atomic ratio.

scholarly journals Effect of UV Irradiation on The Structure and Optical Properties of PVA/Cucl2

2018 ◽  
Vol 14 (2) ◽  
pp. 5378-5387 ◽  
Author(s):  
Moustafa Tawfik Ahmed
Keyword(s):  
Optical Properties ◽  
Uv Irradiation ◽  
Energy Gap ◽  
Copper Chloride ◽  
Uv Spectra ◽  
X Ray Diffraction ◽  
Oh Groups ◽  
X Ray ◽  
Atomic Force ◽  
Direct Energy

The morphology and optical properties of doped PVA with Copper Chloride, CuCl2 have been investigated.   The morphology of doped samples has been examined using both atomic force microscope (AFM) and scanning electron microscope (SEM) to investigate the effect of CuCl2 on the structure of PVA.  X-ray diffraction showed that the crystallinity of PVA is increased with increasing CuCl2 ratio.  In addition, FTIR spectra showed that, some absorbance bands such as bands of OH groups have been affected due to CuCl2 ratio and UV irradiation.  On the other hand, the effect of CuCl2 ratio and UV irradiation on UV spectra of all samples has been carried out in the range from 200 to 800 nm.  It is observed that, PVA is characterized by two absorbance bands at 278 and 313 nm. The values of absorbance edge, Urbach energy and the direct energy gap of all samples have been calculated.

Structural and Optical Properties of PbI2 Thin Films to Fabricate Perovskite Solar Cells

2020 ◽  
Vol 398 ◽  
pp. 140-146
Author(s):  
Kawther A. Khalaph ◽  
Zainab J. Shanan ◽  
Aqel Mashot Jafar ◽  
Falah Mustafa Al-Attar
Keyword(s):  
Thin Films ◽  
Optical Properties ◽  
Energy Gap ◽  
Perovskite Solar Cells ◽  
Lead Iodide ◽  
Structural And Optical Properties ◽  
Solar Cell Application ◽  
Force Microscopy ◽  
Glass Substrates ◽  
Atomic Force

Recently, lead iodide is the most materials employment in the perovskite solar cell application. This paper has studied the character of preparation, structural and optical properties of pbI2 materials. Structural properties are included investigation of the measurements X-Ray Diffraction (XRD), Scan Electron Microscopy (SEM), Fourier Transform InfraRed spectroscopy (FTIR) and Atomic Force Microscopy (AFM) tests to the PbI2 thin films samples. Optical properties are included the investigation UV-Vis test of the thin film samples deposited on glass substrates and investigated the Absorption, Transmittance and evaluated energy gap (Eg = 2.3 eV).

Properties of Cu2ZnSnS4 thin films prepared by magnetron sputtering and sulfurizing the precursors with different stacking sequences

2014 ◽  
Vol 28 (26) ◽  
pp. 1450210 ◽  
Author(s):  
Zhong Hua ◽  
Xiangcheng Meng ◽  
Yaming Sun ◽  
Wanqiu Yu ◽  
Dong Long
Keyword(s):  
Thin Films ◽  
Magnetron Sputtering ◽  
X Ray Diffraction ◽  
Electrical And Optical Properties ◽  
X Ray ◽  
Glass Substrates ◽  
Stacking Order ◽  
Microstructure Morphology ◽  
Hall Effect Measurements ◽  
Uv Visible

The stacked precursors were deposited on glass substrates from Cu , Sn and ZnS targets by magnetron sputtering with six kinds of stacking sequences. The precursors were sulfurized at 500°C for 2 h in an atmosphere of sulfur. The properties of thin films such as microstructure, morphology, chemical composition, electrical and optical properties of the films were investigated by X-ray diffraction (XRD), scanning election microscopy (SEM), energy dispersive spectroscopy (EDS), Hall effect measurements and UV-visible spectrophotometer (UV-VIS). The results show that the thin film after sulfurizing at 500°C using the stacking order of Cu / Sn / ZnS /glass is the best absorber layer for Cu 2 ZnSnS 4 thin films solar cell among the six kinds of stacking sequences.

Sign in / Sign up

Export Citation Format

Share Document