scholarly journals On the Use of Mathematical Models for Wastewater Treatment: A Review and Analysis of Activated Sludge Models ASM1 and ASM3

2020 ◽  
Vol 8 (1) ◽  
pp. 1-18
Author(s):  
Başak SAVUN-HEKİMOĞLU
Keyword(s):  
Wastewater Treatment ◽  
Activated Sludge ◽  
Mathematical Models ◽  
Activated Sludge Models

scholarly journals Activated Sludge Systems as Diferential Equations: A Fresh View on the Classical Models for Wastewater Treatment Plants

2014 ◽  
Vol 6 (2) ◽  
pp. 49-53
Author(s):  
Horea Olosutean ◽  
Letiţia Oprean
Keyword(s):  
Wastewater Treatment ◽  
Differential Equations ◽  
Activated Sludge ◽  
Wastewater Treatment Plants ◽  
Early Stage ◽  
Theory And Practice ◽  
Supplementary Data ◽  
Classical Models ◽  
Activated Sludge Models ◽  
Activated Sludge Systems

Abstract Present in the theory and practice of wastewater treatment for over 50 years in consistent numbers, activated sludge models are widely used by plant operators. The early stage models, based on differential equations were synthetized and reinterpreted, presenting new insides that can help to a better understanding of the processes involved in the wastewater treatment. A consistent symbology is presented, for a much homogenous perspective, and the obvious similarities between several equations from the models are pointed out. The incomplete information from the models is emphasized, showing their amount of providing supplementary data for plant operators and researchers in the field, as well as the causes leading to their drawbacks and the effects derived from these drawbacks.

Kinetic Model of Sequencing Batch Activated Sludge Process for Municipal Wastewater Treatment

1991 ◽  
Vol 23 (4-6) ◽  
pp. 1097-1106 ◽  
Author(s):  
H. Nakazawa ◽  
K. Tanaka
Keyword(s):  
Wastewater Treatment ◽  
Kinetic Model ◽  
Activated Sludge ◽  
Mathematical Models ◽  
Municipal Wastewater ◽  
Pilot Scale ◽  
Activated Sludge Process ◽  
Municipal Wastewater Treatment ◽  
Operational Conditions ◽  
Aeration Time

Mathematical models based on the kinetic aspect of the sequencing batch activated sludge process were developed to explain the characteristics of the process treating municipal wastewater. These models are a steady-state model dealing with the overall relationship between biomass concentrations in a reactor and operational conditions of the process, and a kinetic model dealing with the behaviors of biomass and substrate in a reactor within one cycle time of the process. Applying these mathematical models for the results of pilot-scale experiments for municipal wastewater treatment, reasonable parameters' values were obtained and the effects of operating strategies including the aeration time ratio and the solids retention time became clear for the process performance.

scholarly journals A Review on Occurrence and Spread of Antibiotic Resistance in Wastewaters and in Wastewater Treatment Plants: Mechanisms and Perspectives

2021 ◽  
Vol 12 ◽  
Author(s):  
Cansu Uluseker ◽  
Krista Michelle Kaster ◽  
Kristian Thorsen ◽  
Daniel Basiry ◽  
Sutha Shobana ◽  
...  
Keyword(s):  
Antibiotic Resistance ◽  
Wastewater Treatment ◽  
Activated Sludge ◽  
Mathematical Models ◽  
Wastewater Treatment Plants ◽  
Current Knowledge ◽  
Treated Wastewater ◽  
Resistant Bacteria ◽  
Sludge Treatment ◽  
Treatment Methods

This paper reviews current knowledge on sources, spread and removal mechanisms of antibiotic resistance genes (ARGs) in microbial communities of wastewaters, treatment plants and downstream recipients. Antibiotic is the most important tool to cure bacterial infections in humans and animals. The over- and misuse of antibiotics have played a major role in the development, spread, and prevalence of antibiotic resistance (AR) in the microbiomes of humans and animals, and microbial ecosystems worldwide. AR can be transferred and spread amongst bacteria via intra- and interspecies horizontal gene transfer (HGT). Wastewater treatment plants (WWTPs) receive wastewater containing an enormous variety of pollutants, including antibiotics, and chemicals from different sources. They contain large and diverse communities of microorganisms and provide a favorable environment for the spread and reproduction of AR. Existing WWTPs are not designed to remove micropollutants, antibiotic resistant bacteria (ARB) and ARGs, which therefore remain present in the effluent. Studies have shown that raw and treated wastewaters carry a higher amount of ARB in comparison to surface water, and such reports have led to further studies on more advanced treatment processes. This review summarizes what is known about AR removal efficiencies of different wastewater treatment methods, and it shows the variations among different methods. Results vary, but the trend is that conventional activated sludge treatment, with aerobic and/or anaerobic reactors alone or in series, followed by advanced post treatment methods like UV, ozonation, and oxidation removes considerably more ARGs and ARB than activated sludge treatment alone. In addition to AR levels in treated wastewater, it examines AR levels in biosolids, settled by-product from wastewater treatment, and discusses AR removal efficiency of different biosolids treatment procedures. Finally, it puts forward key-points and suggestions for dealing with and preventing further increase of AR in WWTPs and other aquatic environments, together with a discussion on the use of mathematical models to quantify and simulate the spread of ARGs in WWTPs. Mathematical models already play a role in the analysis and development of WWTPs, but they do not consider AR and challenges remain before models can be used to reliably study the dynamics and reduction of AR in such systems.

scholarly journals Organic matter parameters in WWTP – a critical review and recommendations for application in activated sludge modelling

2021 ◽  
Author(s):  
Markus Ahnert ◽  
Thomas Schalk ◽  
Heike Brückner ◽  
Johannes Effenberger ◽  
Volker Kuehn ◽  
...  
Keyword(s):  
Organic Matter ◽  
Wastewater Treatment ◽  
Literature Review ◽  
Activated Sludge ◽  
Wastewater Treatment Plants ◽  
Data Sets ◽  
Composition Data ◽  
Comprehensive Literature Review ◽  
The Individual ◽  
Activated Sludge Models

Abstract This paper includes a comprehensive literature review of sludge composition data from wastewater treatment plants. 722 data sets from 249 sources were used to establish typical ratios between COD and solids-based parameters and to verify rule-of-thumb values, respectively. Confirmation of these typical ratios can also be accomplished by using biochemical composition data. It is shown that a correlation between data from proteins, lipids and carbohydrates analysis can be related to COD/VSS ratios. Finally, using the findings from the literature review, the organic and inorganic conversion factors of COD fractions in activated sludge models are adjusted to solids-based parameters. It was shown that with the adjustments of the factors and a partition of the particulate inert fraction into a fraction assigned to the influent and a fraction assigned to the endogenous products, a better agreement with the ratios of COD/VSS in the individual sludge streams can be established.

DESIGN PLANNING WASTEWATER TREATMENT PLANT OF NATA DE COCO INDUSTRY WITH THE ACTIVATED SLUDGE PROCESS

2016 ◽  
Vol 9 (2) ◽  
Author(s):  
Dinda Rita K. Hartaja ◽  
Imam Setiadi
Keyword(s):  
Waste Water ◽  
Wastewater Treatment ◽  
Activated Sludge ◽  
Waste Water Treatment ◽  
Treatment Plant ◽  
Water Treatment Plant ◽  
Appropriate Technology ◽  
Waste Water Treatment Plant ◽  
Activated Sludge Process ◽  
High Level

Generally, wastewater of nata de coco industry contains suspended solids and COD were high, ranging from 90,000 mg / l. The high level of of the wastewater pollutants, resulting in nata de coco industry can not be directly disposed of its wastewater into the environment agency. Appropriate technology required in order to process the waste water so that the treated water can meet the environmental quality standards that are allowed. Designing the waste water treatment plant that is suitable and efficient for treating industrial wastewater nata de coco is the activated sludge process. Wastewater treatment using activated sludge process of conventional (standard) generally consists of initial sedimentation, aeration and final sedimentation.Keywords : Activated Sludge, Design, IPAL

Rehabilitation and Upgrading of the Beni Suef City Wastewater Treatment Plant

1990 ◽  
Vol 22 (7-8) ◽  
pp. 131-138
Author(s):  
Ahmed Fadel
Keyword(s):  
Wastewater Treatment ◽  
Activated Sludge ◽  
Wastewater Treatment Plant ◽  
Treatment Plant ◽  
Primary Treatment ◽  
High Rate ◽  
Shock Load ◽  
Economic Evaluations ◽  
Activated Sludge Process ◽  
Trickling Filter

Many of Egypt's cities have existing treatment plants under operation that have been constructed before 1970. Almost all of these treatment plants now need rehabilitation and upgrading to extend their services for a longer period. One of these plants is the Beni Suef City Wastewater Treatment Plant. The Beni Suef WWTP was constructed in 1956. It has primary treatment followed by secondary treatment employing intermediate rate trickling filters. The BOD, COD, and SS concentration levels are relatively high. They are approximately 800, 1100, and 600 mg/litre, respectively. The Beni Suef city required the determination of the level of work needed for the rehabilitation and upgrading of the existing 200 l/s plant and to extend its capacity to 440 l/s at year 2000 A description of the existing units, their deficiencies and operation problems, and the required rehabilitation are presented and discussed in this paper. Major problems facing the upgrading were the lack of space for expansion and the shortage of funds. It was, therefore, necessary to study several alternative solutions and methods of treatment. The choice of alternatives was from one of the following schemes: a) changing the filter medium, its mode of operation and increasing the number of units, b) changing the trickling filter to high rate and combining it with the activated sludge process, for operation by one of several possible combinations such as: trickling filter-solids contact, roughing filter-activated sludge, and trickling filter-activated sludge process, c) dividing the flow into two parts, the first part to be treated using the existing system and the second part to be treated by activated sludge process, and d) expanding the existing system by increasing the numbers of the different process units. The selection of the alternative was based on technical, operational and economic evaluations. The different alternatives were compared on the basis of system costs, shock load handling, treatment plant operation and predicted effluent quality. The flow schemes for the alternatives are presented. The methodology of selecting the best alternative is discussed. From the study it was concluded that the first alternative is the most reliable from the point of view of costs, handling shock load, and operation.

Operational Results of the Wolfsburg Wastewater Treatment Plant

1992 ◽  
Vol 25 (4-5) ◽  
pp. 203-209 ◽  
Author(s):  
R. Kayser ◽  
G. Stobbe ◽  
M. Werner
Keyword(s):  
Wastewater Treatment ◽  
Activated Sludge ◽  
Nitrogen Content ◽  
Total Nitrogen ◽  
Nitrogen Removal ◽  
Wastewater Treatment Plant ◽  
Treatment Plant ◽  
Phosphate Removal ◽  
Total Nitrogen Content ◽  
Activated Sludge Process

At Wolfsburg for a load of 100,000 p.e., the step-feed activated sludge process for nitrogen removal is successfully in operation. Due to the high denitrification potential (BOD:TKN = 5:1) the effluent total nitrogen content can be kept below 10 mg l−1 N; furthermore by some enhanced biological phosphate removal about 80% phosphorus may be removed without any chemicals.

Sign in / Sign up

Export Citation Format

Share Document