scholarly journals Seed yield of linseed varieties grown as ‘paira’ crop as influenced by dates of sowing

2018 ◽  
Vol 10 (1) ◽  
pp. 17-23
Author(s):  
K. Jana ◽  
S. K. Das ◽  
D. C. Roy ◽  
M. K. Kundu ◽  
A. Kundu ◽  
...  
Keyword(s):  
Seed Yield ◽  
West Bengal ◽  
Organic Matter Content ◽  
Matter Content ◽  
Research Station ◽  
Rabi Season ◽  
Pooled Data ◽  
Two Factors ◽  
Available Phosphate ◽  
Plot Design

Linseed is an industrial crop cultivated for its seeds, fibres and oil purpose. Linseed crop can met their requirement i.e. moisture and nutritional demand from stored soil moisture and residual fertility status in "utera‟ or "paira‟ system of cropping. On the basis of this fact an experiment was conducted on “Seed yield of linseed varieties grown as paira crop as influenced by dates of sowing” in red and laterite zone of West Bengal during rabi season of 2012-13 and 2013-14 at Rice Research Station, Bankura, West Bengal, India. Poor in organic matter content, available phosphate and bases, hard structure of iron and aluminium patterned as honeycomb are present in the subsurface regions of the profiles and kaolinite is the predominant clay minerals of red and lateritic zone (western part) of West Bengal. This experiment was laid out in a split-plot design with three replications and compared two factors (dates of sowing and linseed varieties). Objective was identifying the optimum date of sowing and suitable linseed varieties grown as „paira‟ crop under changed climate in red and laterite zone of West Bengal. The experimental results revealed that the highest seed yield (534 kg ha-1 as pooled value) was recorded from the treatment D1 i.e. linseed sown on 15th November. The lowest seed yield (489.2 kg ha-1 as pooled value) was obtained with treatment D3 i.e. linseed sown on 29th November. Among linseed varieties, T-397 has yielded highest seed yield (573.4 kg ha-1 as pooled value). Lowest seed yield (409. 3 kg ha-1 as pooled data) was recorded from Neela variety. From the present study it may be concluded that linseed sown on 15th November is the best time and T-397 is the suitable linseed variety grown as "paira‟ crop under changed climate in red and laterite zone of West Bengal.

Planting pattern and phosphorus management in pigeonpea and mungbean intercropping system

2019 ◽  
Author(s):  
G.K. Math ◽  
M. Udikeri ◽  
L.G. Jaggal ◽  
Yamanura .
Keyword(s):  
Seed Yield ◽  
Agricultural Research ◽  
Research Station ◽  
Planting Pattern ◽  
Pooled Data ◽  
Net Returns ◽  
Main Plot ◽  
System 1 ◽  
Phosphorus Levels ◽  
Plot Design

A field experiment was conducted at Main Agricultural Research Station, Dharwad during rainy season of 2015 and 2016 to study the effect of planting pattern and phosphorus management on production and profitability of intercropping system of mungbean and pigeonpea. The experiment was laid out in split plot design with three replications and eight treatments. Among them, four planting patterns [sole pigeonpea, mungbean + pigeonpea 1:3 (120 cm x 20 cm), mungbean + pigeonpea 1:2 (90 cm x 20 cm) and mungbean + pigeonpea 2:2 (90 cm x 20 cm)] were main plot treatments and two phosphorus levels (P2O5 @ 50 kg ha-1 and P2O5 @ 75 kg ha-1) were sub plot treatments. Based on pooled data the results revealed that, the significantly higher mungbean seed yield (424 kg ha-1) was recorded with application of 75 kg P2O5 as compared to 50 kg P2O5 ha-1. Whereas, in planting pattern, sole mungbean recorded significantly higher seed yield (757 kg ha-1) as compared to all other intercropping systems. Yield advantage indices and net returns were significantly higher in pigeonpea + mungbean (1:3) with 75 kg P2O5 ha-1 as compared to other treatments. This study indicated the need of fifty per cent higher dose of P2O5 for the pigeonpea and mungbean intercropping system (1:3) in northern transition zone of Karnataka.

scholarly journals Studies on growth and yield characters of chickpea (Cicer arietinum L.) varieties suitable for mechanical harvesting

2020 ◽  
Vol 7 (3) ◽  
pp. 634-637
Author(s):  
S. Jaffar Basha ◽  
◽  
V. Jayalakshmi ◽  
S. Khayum Ahammed ◽  
N. Kamakshi ◽  
...  
Keyword(s):  
Seed Yield ◽  
Agricultural Research ◽  
Pooled Analysis ◽  
Test Weight ◽  
Growth And Yield ◽  
Research Station ◽  
Rabi Season ◽  
Higher Plant ◽  
Number Of Branches ◽  
Plot Design

The growth and yield characters of chickpea varieties suitable for mechanical harvesting were evaluated through field experiment conducted for three consecutive years (2016__17 to 2018__19) during rabi season on vertisols under rainfed conditions at Regional Agricultural Research Station, Nandyal, Andhra Pradesh. The investigation was carried out in split plot design with three replications. Two plant geometries (30.0 × 10.0 cm and 22.5 × 10.0 cm) were assigned to main plots and six chickpea varieties (viz., GBM 2, Dheera, CSJ 515, HC 5, Phule G 08108 and BRC 1) were assigned to sub plots. Pooled analysis of experimental results indicated that significantly higher number of branches per plant (8.7) and number of pods per plant (31.1) and test weight (24.3 g) were observed under 30.0 × 10.0 cm when compared to 22.5 × 10.0 cm. Higher plant height (44.8 cm), height of lowest pod bearing branch (30.0 cm), lower days to 50 % flowering (42.1 days) and higher test weight (31.2 g) were observed in Dheera. Higher number of branches per plant (9.2) and number of pods per plant (34.2) were observed in GBM 2. Higher seed yield was observed in Phule G 08108 (1708 kg ha-1) which is followed by GBM 2 (1675 kg ha-1) Dheera (1569 kg ha-1) and BRC 1 (1493 kg ha-1). Higher harvest index (56.4%) was also observed in Phule G 08108. Chickpea varieties GBM2, Dheera and BRC1 were best suitable for mechanical harvesting and higher seed yield due to their excellent morphology.

scholarly journals STATISTICAL MULTIVARIATE ANALYSIS APPLIED TO ENVIRONMENTAL CHARACTERIZATION OF SOIL IN SEMIARID REGION1

2019 ◽  
Vol 32 (1) ◽  
pp. 200-210
Author(s):  
Antônio Italcy de Oliveira Júnior ◽  
Luiz Alberto Ribeiro Mendonça ◽  
Sávio de Brito Fontenele ◽  
Adriana Oliveira Araújo ◽  
Maria Gorethe de Sousa Lima Brito
Keyword(s):  
Organic Matter Content ◽  
Principal Component ◽  
Matter Content ◽  
Multivariate Statistical ◽  
Statistical Tool ◽  
Environmental Characterization ◽  
Hierarchical Grouping ◽  
Two Factors ◽  
Total Data

ABSTRACT Soil is a dynamic and complex system that requires a considerable number of samples for analysis and research purposes. Using multivariate statistical methods, favorable conditions can be created by analyzing the samples, i.e., structural reduction and simplification of the data. The objective of this study was to use multivariate statistical analysis, including factorial analysis (FA) and hierarchical groupings, for the environmental characterization of soils in semiarid regions, considering anthropic (land use and occupation) and topographic aspects (altitude, moisture, granulometry, PR, and organic-matter content). As a case study, the São José Hydrographic Microbasin, which is located in the Cariri region of Ceará, was considered. An FA was performed using the principal component method, with normalized varimax rotation. In hierarchical grouping analysis, the “farthest neighbor” method was used as the hierarchical criterion for grouping, with the measure of dissimilarity given by the “square Euclidean distance.” The FA indicated that two factors explain 75.76% of the total data variance. In the analysis of hierarchical groupings, the samples were agglomerated in three groups with similar characteristics: one with samples collected in an area of the preserved forest and two with samples collected in areas with more anthropized soils. This indicates that the statistical tool used showed sensitivity to distinguish the most conserved soils and soils with different levels of anthropization.

MON-37500 for Weed Control and Alfalfa Seed Production

2004 ◽  
Vol 18 (3) ◽  
pp. 810-815 ◽  
Author(s):  
Clayton D. Myhre ◽  
Heather A. Loeppky ◽  
F. Craig Stevenson
Keyword(s):  
Weed Control ◽  
Seed Yield ◽  
Organic Matter Content ◽  
Residual Activity ◽  
Matter Content ◽  
Management Tool ◽  
Early Season ◽  
Perennial Weed ◽  
Herbicide Treatments ◽  
Alfalfa Seed

Alfalfa seed producers have a limited number of herbicide options to manage weed problems. MON-37500 (proposed name sulfosulfuron) is a sulfonylurea herbicide that controls dandelion and quackgrass, two common weeds in alfalfa fields. A study was conducted in two alfalfa fields at Valparaiso and Carrot River, Saskatchewan, Canada, from 1999 to 2001 to evaluate perennial weed control and alfalfa production responses with 0.5×, 1×, and 1.5× label-recommended rates of MON-37500 and also 2,4-DB and hexazinone. MON-37500 applied at the 1× and 1.5× rates at both locations reduced mid-May alfalfa vigor from 100% to between 80 and 90% and increased early-season control of dandelion and quackgrass by about 10 to 40 percentage units, when compared with other herbicide treatments. Improved weed control with 1× and 1.5× MON-37500 rates was sustained into mid-June only at Carrot River and was completely eliminated (100% vigor and 0% weed control), or almost so, by mid-July. MON-37500 did not control Canada thistle. Improved early-season weed control with the 1× MON-37500 rate apparently compensated for the loss of alfalfa vigor at Valparaiso, thus resulting in 27% (57 kg/ha) greater seed yield than with the other herbicide treatments. At Carrot River, hexazinone generally provided levels of weed control similar to MON-37500 but did not injure alfalfa. Consequently, alfalfa yields were highest and the proportion of dead (decaying) seed was least with this treatment. The 0.5× MON-37500 rate often resulted in inferior weed control relative to the 1× and 1.5× rates and never was among the herbicide treatments providing the greatest seed yield. Managing the residual activity of MON-37500 and its negative effect on alfalfa growth, especially at locations with soils having coarse texture and low organic matter content, represents the greatest challenge in making MON-37500 a reliable weed management tool for alfalfa seed producers.

Biofortification of Zn and Fe in Chickpea through Agronomic Intervention in Medium Black Soils of Karnataka

2020 ◽  
Author(s):  
Pandit S. Rathod ◽  
D.H. Patil ◽  
S.B. Bellad ◽  
Rachappa V. Haveri
Keyword(s):  
Seed Treatment ◽  
Dietary Diversity ◽  
Agricultural Research ◽  
Research Station ◽  
Nutritional Security ◽  
Foliar Fertilization ◽  
Pooled Data ◽  
Net Returns ◽  
Better Than ◽  
Plot Design

Background: Bio-fortification, the process of integrating nutrients into food crops, provides a sustainable and economic way of increasing the density of micronutrients in important staple crops. Agronomic bio-fortification is the easiest, practicable and fastest way for bio-fortification of pulse grains with Fe, Zn, or other desirable micronutrients. Increasing micronutrient rich foods and improving dietary diversity will substantially reduce micronutrient disorders.Methods: A field experiment was conducted during the post rainy seasons of 2015, 2016 and 2017 at Zonal Agricultural Research Station, Kalaburagi, University of Agricultural Sciences, Raichur (Karnataka) to know the effect of soil and foliar fertilization of Zn and Fe on chickpea genotypes. Two genotypes (Annigeri 1 and JG 11) and six fertilization treatments (Control, 0.5% Zn, 0.1% Fe, Zn + Fe, seed treatment with 2 g Zn kg-1 seeds and soil application of Zn) were tested in medium black soils in split plot design with three replications.Result: The pooled data of three seasons indicated that the genotype JG 11, performed better than Annigeri 1 in terms of seed yield (1309 kgha-1), net returns (₹ 31634ha-1) and B: C ratio (2.52). On biofortification of Zn and Fe, foliar fertilization of Zn @ 0.5% + Fe @ 0.1% at flowering stage recorded significantly higher grain yield (1321 kgha-1), net returns (₹ 31179ha-1) and B: C ratio (2.44) over rest of the treatments. Further, foliar fertilization of Zn + Fe had significant influence on nutrient concentration (Zn and Fe) in chickpea grains. Thus, it could be concluded that combined biofortification of Zn + Fe to chickpea crop could be the viable agronomic intervention for getting higher productivity and nutritional security.

scholarly journals Hydrogels Improve Plant Growth in Mars Analog Conditions

2021 ◽  
Vol 8 ◽  
Author(s):  
Frédéric Peyrusson
Keyword(s):  
Plant Growth ◽  
Food Production ◽  
Water Retention ◽  
Organic Matter Content ◽  
Matter Content ◽  
Research Station ◽  
Soil Water Retention ◽  
Mentha Spicata ◽  
Potting Medium

Sustainable human settlement on Mars will require in situ resource utilization (ISRU), the collection and utilization of Mars-based resources, including notably water and a substrate for food production. Plants will be fundamental components of future human missions to Mars, and the question of whether Mars soils can support plant growth is still open. Moreover, plant cultivation may suffer from the lack of in situ liquid water, which might constitute one of the biggest challenges for ISRU-based food production on Mars. Enhancing the crop yield with less water input and improving water utilization by plants are thus chief concern for sustainable ISRU food production. Hydrogels are polymers able to absorb large quantity of water and to increase soil water retention, plant establishment and growth. This work reports on the short-term assessment of plant growth in Mars soil analogs supplemented with hydrogels. Soil analogs consisted of sand and clay-rich material, with low organic matter content and alkaline pH. Soils were supplemented with 10% (w/w) potting medium and were sampled in Utah desert, in the vicinity of the Mars Desert Research Station, surrounded by soils sharing similarities in mineralogical and chemical composition to Martian soils. Height and dry biomass of spearmint (Mentha spicata) were compared under various irrigation frequencies, and seed germination of radish (Raphanus sativus) were monitored. Under limited irrigation, results indicate that the soil analogs were less capable of supporting plant growth as a comparison to potting medium. The effects of hydrogel supplementation were significant under limited irrigation and led to spearmint heights increased by 3 and 6% in clay- and sand-containing soils, respectively. Similarly, hydrogel supplementation resulted in spearmint mass increased by 110% in clay-containing soils and 78% in sand-containing soils. Additionally, while radish seeds failed to germinate in soil analogs, hydrogel supplementation allows for the germination of 27% of seeds, indicating that hydrogels might help loosening dense media with low water retention. Collectively, the results suggest that supplementation with hydrogel and plant growth substrate could help plants cope with limited irrigation and poor alkaline Mars soil analogs, and are discussed in the context of strategies for ISRU-based off-world colonization.

scholarly journals Performance of lentil varieties under relay and minimum tillage conditions in T. Aman rice

2015 ◽  
Vol 40 (2) ◽  
pp. 271-278
Author(s):  
MR Islam ◽  
MK Uddin ◽  
MO Ali
Keyword(s):  
Seed Yield ◽  
Agricultural Research ◽  
Productive Efficiency ◽  
Cost Ratio ◽  
Research Station ◽  
Rabi Season ◽  
Yield Attributes ◽  
Minimum Tillage ◽  
Benefit Cost Ratio ◽  
Benefit Cost

A study on comparative productive efficiency and feasibility of lentil varieties both at relay and minimum tillage were conducted at the Regional Agricultural Research Station, BARI, Ishurdi, Pabna, Bangladesh during the Rabi season of 2007-08 and 2008-09. Three lentil varieties viz. BARI Masur-2, BARI Masur-3 and BARI Masur-4 and two sowing methods viz. relay sowing and furrow sowing (Minimum tillage) were compared. The highest seed yield (1.59 t/ha) was obtained from BARI Masur-4 because of highest number of pods/plant and plant population/m2 while lowest from BARI Masur-2 (1.39 t/ha). The sowing methods had significant effect on the seed yield of lentil. Crops sown in furrows produced higher seed yield (1.60 t/ha) than that of crops in relay sowing. The interaction effect between varieties and sowing methods also had significant effect on the seed yield and yield attributes. The lentil variety BARI Masur-4 when grown in furrows gave the highest seed yield (1.70 t/ha). Though seed yield and gross return were highest in furrow sowing but highest benefit cost ratio (4.67) was found in relay sowing method.Bangladesh J. Agril. Res. 40(2): 271-278 June 2015

scholarly journals Performance of Pigeonpea (Cajanus cajan. L) Varieties under Different Spacings During Rabi Season

2020 ◽  
pp. 61-66
Author(s):  
K. Indudha Reddy ◽  
A. V. Ramanjaneyulu ◽  
M. V. Nagesh Kumar ◽  
C. V. Sameer Kumar ◽  
M. Venkata Ramana
Keyword(s):  
Seed Yield ◽  
Plant Density ◽  
Cost Ratio ◽  
Rabi Season ◽  
Benefit Cost Ratio ◽  
Pooled Data ◽  
Net Returns ◽  
Long Duration ◽  
Plant Densities ◽  
Benefit Cost

An experiment was conducted with the objective of ascertaining the feasibility of cultivation of pigeonpea during rabi season in the alfisols of Southern Telangana Zone. Further, it was designed to understand the performance of pigeonpea genotypes at various plant densities and also the economics of pigeonpea cultivation during rabi season. It consisted of 12 treatments with four plant densities in main plots and three genotypes in sub plots in split plot design. The pooled data of 2015-16 and 2016-17 revealed that significantly higher seed yield (1532 kg ha-1) was recorded at plant density of 60 cm × 10 cm spacing than at 45cm × 10cm (1332 kg/ha), 75 cm × 10 cm (1321 kg/ha) and 90 cm × 10 cm (1141 kg/ha). Among the genotypes, the seed yield in PRG-158 (1547 kg/ha) and Asha (ICPL 87119) (1591 kg/ha) was on par with each other but significantly higher than in PRG-176 (857 kg/ha). The higher gross returns (Rs. 77366 ha-1), net returns (Rs.46733 ha-1) and benefit cost ratio (2.53) was recorded at plant density of 60 cm × 10 cm spacing than at other tested plant densities (45 cm × 10 cm, 75 cm × 10 cm and 90 cm × 10 cm). Among the genotypes, Asha (ICPL 87119) registered highest gross returns (Rs. 80346 ha-1), net returns (Rs.49711 ha-1) and benefit cost ratio (2.62) followed by PRG-158 (gross returns of Rs. 78124ha-1, net returns of Rs.47489 ha-1 and benefit cost ratio of 2.55) and PRG-176 (gross returns of Rs. 43279ha-1, net returns of Rs.13144 ha-1 and benefit cost ratio of 1.44). Thus, the spacing of 60 cm × 10 cm is recommended for the cultivation of pigeonpea during rabi season in alfisols of Southern Telangana Zone with long duration varieties like PRG-158 and Asha (ICPL-87119).

scholarly journals Effect of irrigation and sowing method on yield and yield attributes of mustard

2015 ◽  
Vol 41 ◽  
pp. 65-70
Author(s):  
M. B. Hossain ◽  
M. S. Alam ◽  
M. A. Ripon
Keyword(s):  
Seed Yield ◽  
Significant Influence ◽  
Seed Weight ◽  
Agricultural Extension ◽  
Yield Attributes ◽  
Stover Yield ◽  
Two Factors ◽  
Almost All ◽  
Number Of Branches ◽  
Plot Design

The experiment was carried out at Agronomy Field laboratory, Department ofAgronomy and Agricultural Extension, university of Rajshahi, to study the effect of irrigation and sowing method on yield and yield attributes of mustard. The experiment consists of two factors i) irrigation viz. no irrigation (I0), one irrigation (I1)and two irrigations (I2) ii) sowing method viz. line sowing method (M1) and broadcasting method (M2). A split- plot design was used for the experiment by assigning the irrigation on the main plots and sowing method to the sub plots with three replications. Irrigation had significant effect on all the yield and yield contributing characters. The highest plant height, number of branches plant-1, filled siliqua plant-1, sliqua length, number of seed siliqua-1, 1000-seed weight and stover yield were obtained from I2 (two irrigations) and consequently it produced the highest seed yield. Sowing method also had significant influence on almost all the yield and yield contributing characters. All the yield contributing characters except number of unfilled siliqua plant-1were found best at line sowing method (M1) and consequently it produced the highest seed yield. However it could be noted from the study that the combination of two irrigations with line sowing method is better to get higher yield of mustard.

scholarly journals Varietal Performance of Anthurium (Anthurium andreanum) on Growth and Flowering in the Subtropical Zone of West Bengal

2021 ◽  
pp. 32-37
Author(s):  
Tapas Kumar Chowdhuri ◽  
Raghunath Sadhukhan ◽  
Tushar Ghosh
Keyword(s):  
West Bengal ◽  
Vase Life ◽  
Research Station ◽  
Subtropical Zone ◽  
Pooled Data ◽  
Commercial Cultivation ◽  
Yield And Quality ◽  
Randomized Design ◽  
Tropical Conditions ◽  
Anthurium Andreanum

An investigation was conducted to evaluate genotypes of Anthurium by maintaining in the pot at Horticultural Research Station, Mondouri, Bidhan Chandra Krishi Viswavidyalaya, West Bengal during three consecutive years 2015-16, 2016-17 and 2017-18. The experiment was laid out in Complete Randomized Design (CRD) with fourteen anthurium cultivars and replicated thrice. Significant differences were found between all the parameters studied. From the pooled data of three years, it was observed that Tropical Red, Agnihotri and Marina recorded better suckering ability. The highest plant height was recorded in Tropical (42.4 cm) closely followed by KalingPong Pink (41.2 cm) and Nitta (39.8 cm). A maximum number of flowers plant-1 year-1 was noticed in Tropical (8.3) and lowest in Alexis (2.1). Ozaki Red recorded the largest flower (9.5 x 7.6 sq. cm), which was followed by Tropical (9.02 x 8.6 sq. cm), Tinora (8.9 x 7.3 sq. cm), and Alexis (8.9 x 8.6 sq. cm). The longest flower spike length was observed in Agnihotri (38.2 cm) followed by Tropical. Spike extended maximum vase life in Pistache (10.1 days) closely followed by Tropical (9.9 days). Overall, among the fourteen cultivars, Tropical was the best cultivar regarding both yield and quality flower production for commercial cultivation in the sub-tropical conditions of West Bengal.

Sign in / Sign up

Export Citation Format

Share Document