Biofortification of Zn and Fe in Chickpea through Agronomic Intervention in Medium Black Soils of Karnataka

2020 ◽  
Author(s):  
Pandit S. Rathod ◽  
D.H. Patil ◽  
S.B. Bellad ◽  
Rachappa V. Haveri
Keyword(s):  
Seed Treatment ◽  
Dietary Diversity ◽  
Agricultural Research ◽  
Research Station ◽  
Nutritional Security ◽  
Foliar Fertilization ◽  
Pooled Data ◽  
Net Returns ◽  
Better Than ◽  
Plot Design

Background: Bio-fortification, the process of integrating nutrients into food crops, provides a sustainable and economic way of increasing the density of micronutrients in important staple crops. Agronomic bio-fortification is the easiest, practicable and fastest way for bio-fortification of pulse grains with Fe, Zn, or other desirable micronutrients. Increasing micronutrient rich foods and improving dietary diversity will substantially reduce micronutrient disorders.Methods: A field experiment was conducted during the post rainy seasons of 2015, 2016 and 2017 at Zonal Agricultural Research Station, Kalaburagi, University of Agricultural Sciences, Raichur (Karnataka) to know the effect of soil and foliar fertilization of Zn and Fe on chickpea genotypes. Two genotypes (Annigeri 1 and JG 11) and six fertilization treatments (Control, 0.5% Zn, 0.1% Fe, Zn + Fe, seed treatment with 2 g Zn kg-1 seeds and soil application of Zn) were tested in medium black soils in split plot design with three replications.Result: The pooled data of three seasons indicated that the genotype JG 11, performed better than Annigeri 1 in terms of seed yield (1309 kgha-1), net returns (₹ 31634ha-1) and B: C ratio (2.52). On biofortification of Zn and Fe, foliar fertilization of Zn @ 0.5% + Fe @ 0.1% at flowering stage recorded significantly higher grain yield (1321 kgha-1), net returns (₹ 31179ha-1) and B: C ratio (2.44) over rest of the treatments. Further, foliar fertilization of Zn + Fe had significant influence on nutrient concentration (Zn and Fe) in chickpea grains. Thus, it could be concluded that combined biofortification of Zn + Fe to chickpea crop could be the viable agronomic intervention for getting higher productivity and nutritional security.

Planting pattern and phosphorus management in pigeonpea and mungbean intercropping system

2019 ◽  
Author(s):  
G.K. Math ◽  
M. Udikeri ◽  
L.G. Jaggal ◽  
Yamanura .
Keyword(s):  
Seed Yield ◽  
Agricultural Research ◽  
Research Station ◽  
Planting Pattern ◽  
Pooled Data ◽  
Net Returns ◽  
Main Plot ◽  
System 1 ◽  
Phosphorus Levels ◽  
Plot Design

A field experiment was conducted at Main Agricultural Research Station, Dharwad during rainy season of 2015 and 2016 to study the effect of planting pattern and phosphorus management on production and profitability of intercropping system of mungbean and pigeonpea. The experiment was laid out in split plot design with three replications and eight treatments. Among them, four planting patterns [sole pigeonpea, mungbean + pigeonpea 1:3 (120 cm x 20 cm), mungbean + pigeonpea 1:2 (90 cm x 20 cm) and mungbean + pigeonpea 2:2 (90 cm x 20 cm)] were main plot treatments and two phosphorus levels (P2O5 @ 50 kg ha-1 and P2O5 @ 75 kg ha-1) were sub plot treatments. Based on pooled data the results revealed that, the significantly higher mungbean seed yield (424 kg ha-1) was recorded with application of 75 kg P2O5 as compared to 50 kg P2O5 ha-1. Whereas, in planting pattern, sole mungbean recorded significantly higher seed yield (757 kg ha-1) as compared to all other intercropping systems. Yield advantage indices and net returns were significantly higher in pigeonpea + mungbean (1:3) with 75 kg P2O5 ha-1 as compared to other treatments. This study indicated the need of fifty per cent higher dose of P2O5 for the pigeonpea and mungbean intercropping system (1:3) in northern transition zone of Karnataka.

scholarly journals Evaluation of Pre Released Rice (Oryza sativa L.) Genotypes under Different Sowing Dates in Rainy Season

2020 ◽  
pp. 77-84
Author(s):  
D. Anil ◽  
Sreedhar Siddi
Keyword(s):  
Field Experiments ◽  
Agricultural Research ◽  
Growth Parameters ◽  
Oryza Sativa L ◽  
Maximum Growth ◽  
Research Station ◽  
Pooled Data ◽  
Net Returns ◽  
Sowing Dates ◽  
Rice Genotypes

Field experiments were conducted to evaluate the pre released rice genotypes under different sowing windows on clay soils of agricultural research station, Kunaram, Telangana state, India during two consecutive rainy seasons of 2018 and 2019.The experiment was laid out in strip plot design with three replications. The treatments comprised of three sowing dates i.e. 20thJune, 5thJuly and 20thJuly in horizontal factor and four genotypes i.e. KNM 733, RNR 15048, KNM 1638 and KNM 118 in vertical factor. The pooled data results indicated that, among the genotypes the genotype KNM 1638 sown on 5th July recorded maximum growth parameters and highest grain yield (7455 kg ha-1) and followed by sown on 20th June. In respect of economics of treatment combinations, the highest net returns (Rs.75,326 ha-1), gross returns (Rs.1,35,326 ha-1) and B:C (2.26) ratio were obtained when rice crop was sown during 5th July with the  genotype KNM1638 and followed by sown on 20th June with the  genotype KNM 1638.

Productive potential of pigeonpea [Cajanus cajan (L.) Millsp.] genotypes in different planting geometry under protective irrigation

2017 ◽  
Author(s):  
A. S. Channabasavanna ◽  
H. Rajakumar ◽  
M. S. Kitturmath ◽  
A. M. Talwar
Keyword(s):  
Field Experiment ◽  
Grain Yield ◽  
Cajanus Cajan ◽  
Agricultural Research ◽  
Research Station ◽  
Agricultural Research Station ◽  
Net Returns ◽  
Planting Geometry ◽  
Productive Potential ◽  
Plot Design

A field experiment was conducted at Agricultural Research Station, Malnoor, University of Agricultural Sciences, Raichur on vertisols during kharif seasons of 2010-11 and 2011-12 to study the productive potential of pigeonpea genotypes in different planting geometry under protective irrigation. The experiment consisted of three genotypes (BSMR-736, TS-3R and Laksmi) and seven planting geometry ( 90 x 20 cm, 120 x20 cm, 120 x 60 cm, 120 x 90 cm, 150 x 20 cm, 150 x 60 cm and 150 x 90 cm). The experiment was conducted in split plot design with three replications. Results revealed that among three genotypes tested, BSMR-736 (1667 kg/ha) recorded significantly higher grain yield over Laksmi (1369 kg/ha) and TS-3R (823 kg/ha). With respect to planting geometry, 90 x 20 cm, 120x20 cm and 150x20 cm recorded the highest grain yield, net returns and B:C irrespective of the genotypes. The interaction between genotypes and planting geometry showed that the genotype BSMR-736 planted at 150X20 cm recorded the highest grain yield (2322 kg/ha), net returns (Rs. 64421/ha) and B:C (4.37).

scholarly journals Effect of biodegradable urban waste compost on growth and yield of maize (Zea mays L.)

2019 ◽  
Author(s):  
S. B. Yogananda ◽  
V.R. Ramakrishna Parama ◽  
V.R. Ramakrishna Parama ◽  
S. S. Prakash ◽  
M. N. Thimmegowda
Keyword(s):  
Zea Mays L ◽  
Agricultural Research ◽  
Fertilizer Application ◽  
Growth And Yield ◽  
Research Station ◽  
Farm Yard Manure ◽  
Urban Waste ◽  
Pooled Data ◽  
Net Returns ◽  
Stover Yield

A field experiment was conducted at Zonal Agricultural Research Station, V. C. Farm, Mandya, to study the effect of biodegradable urban waste compost on growth and yield of maize during kharif season of 2014 and 2015. The pooled data of two years indicated that, the grain yield of maize was significantly higher in recommended dose of fertilizer (150:75:40 kg NPK/ha) + Farm yard manure (FYM) @10 t/ha (6995 kg/ha) as compared to no fertilizer application. However, it was on par with application of 50% N as fertilizers + 50% N as urban compost (6954 kg/ha), 25% N as fertilizers + 75% N as urban compost (6815 kg/ha), 100% N as urban compost (6925 kg/ha), 100% N through vermicompost (6644 kg/ha) and 100% N through FYM (6342 kg/ha). Among the urban compost treatments, application of 50% N as a fertilizer and remaining 50% N as urban waste compost recorded significantly higher yield (6954 kg/ha) stover yield (7272 kg/ha), net returns(Rs.50,374/ha) and B:C ratio (2.02).

scholarly journals Evaluation of plantain genotypes for yield and other characters

2018 ◽  
Vol 43 (1) ◽  
pp. 71-80
Author(s):  
N Ara ◽  
M Moniruzzaman ◽  
R Khatoon ◽  
M Moniruzzaman
Keyword(s):  
Agricultural Research ◽  
Block Design ◽  
Fruit Size ◽  
Productivity Index ◽  
Maturity Stage ◽  
Research Station ◽  
Yield Attributes ◽  
Yield And Quality ◽  
Randomized Complete Block Design ◽  
Better Than

An experiment was carried out at the Regional Agricultural Research Station, BARI, Ishurdi, Pabna during 2013-15, with eleven genotypes of plantain to evaluate their performances for yield attributes, yield and quality characters. The genotypes included in this investigation were MP001, MP002, MP003, MP006, MP007, MP015, MP018, MP024, MP025, ISD002 and BARI Kola-2 as check. The experiment was laid out in randomized complete block design with three replications. The genotype MP002 produced the maximum number of fingers/bunch (105.67) closely followed by BARI Kola-2 (103.00) and MP015 (101.00). Both the genotypes MP024 and MP025 showed the highest fruit length (21.70 cm), but ISD002 gave the maximum fruit girth (16.78 cm), which was statistically similar with that of MP003 (16.30 cm) and MP024 (16.33 cm). The highest yield and the maximum number of hands were produced by the genotype MP024 (47.81 t/ha and (8.33/bunch) followed by MP015 (36.70 t/ha and 6.33/bunch). Fingers of the genotypes required boiling time in the range of 20.00 min (MP001) to 15.00 min (BARI Kola-2). Flesh of all genotypes possesses pleasant aroma except MP002, MP003 and ISD002. Among the eleven genotypes MP001, MP006, MP007, MP008, MP015 and MP024 were found better when cooked as smashed. The genotype ISD002 took the maximum time (467.33 days) to reach the edible maturity stage of fruits whereas MP024 required the minimum (339.00 days). The genotypes MP015 and MP024 performed better than BARI Kola-2 in respect of bunch weight, fruit size, productivity index, yield, sucker production and qualitative characters.Bangladesh J. Agril. Res. 43(1): 71-80, March 2018

Effect of Land Configuration and Weed Management on Performance of Urdbean [Vigna mungo (L.) Hepper]

2020 ◽  
Author(s):  
P. Venkata Rao ◽  
A. Subbarami Reddy ◽  
M. V. Ramana
Keyword(s):  
Grain Yield ◽  
Weed Management ◽  
Management Practices ◽  
Agricultural Research ◽  
Vigna Mungo ◽  
Growth And Yield ◽  
Research Station ◽  
Marginal Lands ◽  
Yield Attributes ◽  
Plot Design

Background: Blackgram is an important crop among kharif pulses and is usually grown on marginal and sub-marginal lands without proper weed management under rainfed situation. Broad bed furrows had greater influence on plant growth over farmers practice. Weed management through mechanical or manual is normally tedious, labour consuming and costlier. Keeping this in view, the present study was envisaged to investigate integrated effect of land configuration and weed management regimes on productivity of urdbean. Methods: A field experiment was carried out during kharif seasons of 2016 and 2017 at Regional Agricultural Research Station, Lam, Guntur on effect of land configuration and weed management on performance of urdbean (Vigna mungo L.Hepper). The treatments included two land configurations i.e., flat bed and broad bed furrow method allotted as horizontal plots and four weed management practices i.e., weedy check, pendimethalin 30 EC @ 1.0 kg a.i ha-1 PE, imazethapyr 10% SL @ 55 g ha-1 at 15-20 DAS and pendimethalin 30 EC @ 1.0 kg a.i ha-1 PE fb imazethapyr 10% SL @ 55g ha-1 at 15-20 DAS allotted as vertical plots replicated four times in a strip plot design. The comparison of treatment means was made by critical difference (CD) at P less than 0.05 by using standard statistical procedures. Result: Based on the results, it can be concluded broad bed method of land configuration proved its superiority over flat bed method by producing 12.8 per cent higher grain yield besides empowering growth and yield attributes. Among the weed management practices, the highest grain yield (1280 kg ha-1) recorded with pendimethalin 30 EC @ 1.0 kg a.i ha-1 PE fb imazethapyr 10% SL @ 55g ha-1 at 15-20 DAS along with maximum monetary returns and B:C can be recommended for urdbean.

scholarly journals Evaluation of Comparable Crops to Maize in Rain Fed Alfisols of Telangana State

2020 ◽  
pp. 183-192
Author(s):  
Y. Siva Lakshmi ◽  
D. Sravanthi ◽  
R. Susheela ◽  
A. V. Ramanjaneyulu ◽  
P. Raghu Rami Reddy
Keyword(s):  
Nutritive Value ◽  
Agricultural Research ◽  
Pigeon Pea ◽  
Green Gram ◽  
Annual Rainfall ◽  
Cost Ratio ◽  
Research Station ◽  
Crop Failure ◽  
Net Returns ◽  
Telangana State

Tornala village of Siddipet District (Previously part of Medak district) in Telangana State comes under low rainfall area with an average annual rainfall of 787.6 mm and experiences extreme seasonal variation in rainfall. A new Agricultural Research Station was established in 2014 to meet the agricultural needs of adjoining areas of Siddipet District. Maize is one of the principal crops of the Siddipet District grown in light soils under rain fed situation. Erratic behaviour of rainfall results in moisture stress of both kinds (excess and deficit) during maize growing season which is leading to frequent crop failures. Millets and pulses are gaining importance which can be grown very well under rainfed situation. To create awareness among the farmers about the importance of other drought tolerant crops suitable for the situation and also to promote drought resistant and short duration, nutritional rich pulse crops in place of maize was the primary objective in conducting this trial. Keeping the above in view, a field experiment was conducted to identify a suitable crop comparable/ alternative to maize with a view to reduce the risk of crop failure under rain fed conditions and to realize the nutritive value of millets. Nine crops viz. Bajra, Ragi, Korra, Maize, Green gram, Pigeon pea, Cotton, Castor Hybrid (PCH 111) and Castor variety (Kranthi) were evaluated for three years. Yields of all the crops were converted into maize equivalent yields and economics was worked out. Pooled means were worked out for yield as well as for economic returns. Results showed that higher maize equivalent yield was recorded in Pigeon pea (4354 kg ha-1) followed by Bajra (2804 kg ha-1), ragi (2604 kg ha-1), cotton (2344 kg ha-1) and green gram (2075 kg ha-1).  In terms of net returns pigeon pea recorded highest mean net returns (39080 Rs ha-1) followed by bajra (25553 Rs ha-1) and ragi (20614 Rs ha-1) whereas highest mean benefit cost ratio was with bajra (2.44) followed by pigeon pea (2.41) and ragi (2.05) compared to maize (2297 Rs ha-1 and 1.08 respectively). Hence, from the study it can be recommended that Bajra, Pigeon pea and Ragi can be grown in place of maize in low rain fall areas of Siddipet (Dt) under rain fed situation.

scholarly journals Fertilizer responsiveness of short duration improved finger millet genotypes to different levels of NPK fertilizers

2018 ◽  
Author(s):  
U. Triveni ◽  
Y. Sandhya Rani ◽  
T.S. S.K. Patro ◽  
N. Anuradha ◽  
M. Divya
Keyword(s):  
Grain Yield ◽  
Finger Millet ◽  
Agricultural Research ◽  
Growth And Yield ◽  
Research Station ◽  
Npk Fertilizers ◽  
Yield Increase ◽  
Check Variety ◽  
Different Levels ◽  
Plot Design

A field experiment was carried out at Agricultural Research Station, Vizianagaram, during Kharif, 2016 under rainfed conditions to know the fertilizer responsiveness of promising finger millet varieties to graded doses of NPK fertilizers. Twenty treatment combinations were tested in split- plot design with three replications. Experimental results revealed that with 125% RDF grain yield increase was 10%, 27% and 48% higher than 100% RDF, 75% RDF and 50% RDF respectively. Among the finger millet genotypes, grain yield of VL-379(2037 kg/ha) and VL-352(1989 kg/ha) was significantly high and was at par with national check variety VR-708(1959 kg/ha). Both the test varieties (VL-379 and VL-352) were far superior to local check variety in terms of growth and yield characteristics. Higher net monetary returns and B:C ratio were obtained with VL-379, followed by VR-708 and VL-352 at 125% RDF.

scholarly journals Studies on growth and yield characters of chickpea (Cicer arietinum L.) varieties suitable for mechanical harvesting

2020 ◽  
Vol 7 (3) ◽  
pp. 634-637
Author(s):  
S. Jaffar Basha ◽  
◽  
V. Jayalakshmi ◽  
S. Khayum Ahammed ◽  
N. Kamakshi ◽  
...  
Keyword(s):  
Seed Yield ◽  
Agricultural Research ◽  
Pooled Analysis ◽  
Test Weight ◽  
Growth And Yield ◽  
Research Station ◽  
Rabi Season ◽  
Higher Plant ◽  
Number Of Branches ◽  
Plot Design

The growth and yield characters of chickpea varieties suitable for mechanical harvesting were evaluated through field experiment conducted for three consecutive years (2016__17 to 2018__19) during rabi season on vertisols under rainfed conditions at Regional Agricultural Research Station, Nandyal, Andhra Pradesh. The investigation was carried out in split plot design with three replications. Two plant geometries (30.0 × 10.0 cm and 22.5 × 10.0 cm) were assigned to main plots and six chickpea varieties (viz., GBM 2, Dheera, CSJ 515, HC 5, Phule G 08108 and BRC 1) were assigned to sub plots. Pooled analysis of experimental results indicated that significantly higher number of branches per plant (8.7) and number of pods per plant (31.1) and test weight (24.3 g) were observed under 30.0 × 10.0 cm when compared to 22.5 × 10.0 cm. Higher plant height (44.8 cm), height of lowest pod bearing branch (30.0 cm), lower days to 50 % flowering (42.1 days) and higher test weight (31.2 g) were observed in Dheera. Higher number of branches per plant (9.2) and number of pods per plant (34.2) were observed in GBM 2. Higher seed yield was observed in Phule G 08108 (1708 kg ha-1) which is followed by GBM 2 (1675 kg ha-1) Dheera (1569 kg ha-1) and BRC 1 (1493 kg ha-1). Higher harvest index (56.4%) was also observed in Phule G 08108. Chickpea varieties GBM2, Dheera and BRC1 were best suitable for mechanical harvesting and higher seed yield due to their excellent morphology.

scholarly journals Effects of Plant Pattern and Nitrogen Fertilizer on Yield and Yield Components of Silage Corn Cultivars

2016 ◽  
Vol 4 (1) ◽  
pp. 152
Author(s):  
Mohammad Hossein Haddadi ◽  
Masoud Mohseni
Keyword(s):  
Plant Height ◽  
Agricultural Research ◽  
Dry Weight ◽  
Forage Yield ◽  
Row Spacing ◽  
Research Station ◽  
Significant Difference ◽  
Leaf Yield ◽  
Ear Height ◽  
Better Than

To study effect of sowing pattern and nitrogen on maize silage yield and its dependents components a trial was done at split-split plot design in compeletly randomized block at four replications in Qrakheil(Qaemshahr) agricultural research station in 2015 in Iran. Row spacing was chosen as main plots including: 65cm, 75cm and 85cm.Two cultivars (Sc704 and Sc770) in sub plots and three levels of N (250, 350 and 450 kg ha1) in sub-sub plots were laid out. Silage forage yield, ear and dry ear yield, leaf and dry leaf yield, plant dry weight and stem and dry stem weight,plant height , ear height,kernel number in ear row and row number in ear were measured.The results indicated that row spacing, were not affected on investigated traits. While nitrogen effected on silage yield, ear and dry ear yield, leaf and dry leaf yield, plant dry weight and stem and dry stem weight, plant height and ear height and showed significant difference. Sc704 had significant difference on plant silage weight, dry and wet stem weight with Sc770. Amount of 350kg/ha nitrogen was caused the most silage yield (36.74t/ha) and plant dry weight (16.64 t/ha) that had not significant difference with usage of 450kg/ha nitrogen(16.46 t/ha). Amount of 450kg/ha nitrogen was caused the most silage yield (37.30t/ha) that had not significant difference with usage of 350kg/ha nitrogen (36.74 t/ha). The most silage yield (38.21t/ha) obtained from Sc704 that was better than Sc770 (34.22 t/ha). The most plant dry weight (16.54) obtained from Sc704 that had not significant difference with Sc770 (15.92 t/ha).

Sign in / Sign up

Export Citation Format

Share Document